Hello,
A few days ago I was not able to log into my machine using SSH. I got this
following message "Server refused to allocate pty". I was, somewhat
fortunately, able to log using SCP. So SCP works. The file system looked good
for the most part; until I checked out "/DEV". Almost everything
Hi all
I tied to install 6.1 on a CompaQ D310. At the beginning I only got a BTX
Halt. Then after googling around I found a similar problem on the D510 and
disabled DMA in the BIOS. Now the system boots (the same with the floppy
set), but when it comes to partitioning I got "No disk drives foun
On Thu, 31 Aug 2006 00:01:07 -0400
stan <[EMAIL PROTECTED]> wrote:
> On that disk is a world, built from last weekends cvsup. I was able
> to reproduce it's instability to build a generic kernel. It fails with
> a signal (I believe) 11,
fair enough :)
btw, from past experience, sig_fault 11 usu
On Thu, Aug 31, 2006 at 01:39:35PM +1000, Norberto Meijome wrote:
> On Wed, 30 Aug 2006 18:02:28 -0400
> stan <[EMAIL PROTECTED]> wrote:
>
> > I can't get 6.1 to even compile a new kernel on 2 different Sun
> > Ultra 40's Anyone have nay reason that it should not work on these machines?
>
> Stan
On Mon, Aug 28, 2006 at 01:59:14PM -0700, Dr. Jennifer Nussbaum wrote:
> I wish i could, but i dont have physical access to the machine - its
> in a remote location with no serial console. So if anything gets
> messed up during an upgrade, im in a hell of a lot of trouble.
>
> I dont know when i
On Tue, Aug 29, 2006 at 05:14:01PM -0500, Laurence Sanford wrote:
> I'm not much on posting mystery stuff for people to try to solve, but
> I'm at the end of my rope with this one. I have a box that's been pretty
> stable until very recently, and I don't know if I may have missed
> something imp
On Wed, Aug 30, 2006 at 08:47:06PM -0500, Jonathan Horne wrote:
> ive noticed that apache can be started manually using the apachectl tool,
> even> if it is not enabled in /etc/rc.conf. do many other daemons have this
> ability? i have a dev server that i would like to not have many things
> e
At 08:38 AM 8/30/2006 -0500, Derek Ragona wrote:
I would check the errat on the S3 you are using. It sounds like there may
be some kernel/system changes you may need to make since your lockups are
from going back to text mode from graphics mode. It is likely some
conflict this is causing is h
On Wed, 30 Aug 2006 18:02:28 -0400
stan <[EMAIL PROTECTED]> wrote:
> I can't get 6.1 to even compile a new kernel on 2 different Sun
> Ultra 40's Anyone have nay reason that it should not work on these machines?
Stan,
as a general rule, telling the list what you did and the (exact) error /
probl
Darrin Chandler writes:
> On Wed, Aug 30, 2006 at 08:47:06PM -0500, Jonathan Horne wrote:
> > ive noticed that apache can be started manually using the
> > apachectl tool, even if it is not enabled in /etc/rc.conf. do
> > many other daemons have this ability? i have a dev server
> > that i
On Fri, Aug 25, 2006 at 08:26:54PM -0400, stan wrote:
> I'm trying to do a buildworld (AMD64) on a Sum Ultra 40, but it's failing
> like this:
>
> cc -O2 -fno-strict-aliasing -pipe -DRRESTORE -DRESCUE -c
> /usr/src/sbin/restore
> /restore.c
> cc -O2 -fno-strict-aliasing -pipe -DRRESTORE -DRESCU
> Production server is running apache13/php4/mysql4.
> Have fresh 6.1 install on workbench PC.
> Workbench PC is being used to build apache13/php5/mysql51
> environment
> for working php web application writing and reading mysql
database.
>
> Installed mysql51-server then php5 and made sure make
I hate to admit that I've lost email, but I had one OpenBSD/FreeBSD user
that was trying to help me get it working there ... but I lost his email
... so, please email me again :(
And, I'd like to find a NetBSD user that is willing to help debug/tweak it
over there, if there are any laying ab
On Wed, Aug 30, 2006 at 08:47:06PM -0500, Jonathan Horne wrote:
> ive noticed that apache can be started manually using the apachectl tool,
> even
> if it is not enabled in /etc/rc.conf. do many other daemons have this
> ability? i have a dev server that i would like to not have many things
>
Jonathan Horne wrote:
> ive noticed that apache can be started manually using the apachectl tool,
> even
> if it is not enabled in /etc/rc.conf. do many other daemons have this
> ability? i have a dev server that i would like to not have many things
> enabled in the rc.conf, but i would like
ive noticed that apache can be started manually using the apachectl tool, even
if it is not enabled in /etc/rc.conf. do many other daemons have this
ability? i have a dev server that i would like to not have many things
enabled in the rc.conf, but i would like an easy way to just start specifi
On Wed, 30 Aug 2006 21:18:49 -0400
Pete C <[EMAIL PROTECTED]> wrote:
> On Wed, 30 Aug 2006 17:59:17 -0400
> > Pete C <[EMAIL PROTECTED]> wrote:
> >
> >> did a 'make install' for linux-firefox I got an error that
> >> libXfixes.so.3 (as part of linux-glib2, IIRC) could not be found . . .
> >> aft
On Wed, 30 Aug 2006 17:59:17 -0400
Pete C <[EMAIL PROTECTED]> wrote:
> did a 'make install' for linux-firefox I got an error that
> libXfixes.so.3 (as part of linux-glib2, IIRC) could not be found . . .
> after some googling and a few bad leads for some reason I did another
> make install an
Cody Holland wrote:
> I'm looking at trying to build my own customized FreeBSD install CD. The
> purpose of this is to be able to install FreeBSD with customized kernel,
> certain packages installed and some added scripts of my own. Being that I
> have no idea how to do this I have two questions.
Michal Mertl wrote:
> No! Kernel threads (e.g. handling interrupts) aren't that much different
> to normal processes.
>
> Logical CPUs on a single HTT capable CPU share most of the CPU logic,
> especially all the external stuff (handling interrupts). Scheduling
> handling of interrupts on the "seco
Skylar Thompson wrote:
> Jordi Carrillo wrote:
> > 2006/8/30, backyard <[EMAIL PROTECTED]>:
> >>
> >>
> >>
> >> --- Jordi Carrillo <[EMAIL PROTECTED]> wrote:
> >>
> >> > I've read that SMP should be disabled for
> >> > performance issues (I did not know
> >> > that before installing freebsd). I hav
At 20:01 2006-08-25, you wrote:
Did accept filter error problem get resolved? I do NOT have
NO_MODULES set in the kernel config or in /etc/make.conf anywhere,
and I checked:
unicorn[126]# pwd
/boot/kernel
unicorn[127]# ll *http*
-r-xr-xr-x 1 root wheel 5544 Aug 25 12:05 accf_http.ko*
I recompiled x11/nvidia-driver and rebooted, and that fixed it somehow.
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
___
freebsd-questions@freebs
On Wednesday 30 August 2006 21:55, Gerard Seibert wrote:
> RW wrote:
> > What's the canonical way of mounting the Linux procfs at boot-time?
> >
> > I've seen several recommendations to add the following to fstab:
> >
> > linproc/compat/linux/proc linprocfs rw 0 0
> >
> > But in a st
>
> I'm new to Freebsd, and the other day I installed FreeBSD and let FreeBSD to
> partition my hard disk. Now, when I do df -k I see that the devfs filesystem
> mounted on /dev is at 100% of capacity.
> $df -k
> devfs 1 10 100%/dev
> with 1 kb of capacity.
> is t
2006/8/31, Javier Henderson <[EMAIL PROTECTED]>:
On Aug 30, 2006, at 7:11 PM, Jordi Carrillo wrote:
> I'm new to Freebsd, and the other day I installed FreeBSD and let
> FreeBSD to
> partition my hard disk. Now, when I do df -k I see that the devfs
> filesystem
> mounted on /dev is at 100% of
I'm new to Freebsd, and the other day I installed FreeBSD and let FreeBSD to
partition my hard disk. Now, when I do df -k I see that the devfs filesystem
mounted on /dev is at 100% of capacity.
$df -k
devfs 1 10 100%/dev
with 1 kb of capacity.
is this normal, or t
2006/8/30, backyard <[EMAIL PROTECTED]>:
--- Jordi Carrillo <[EMAIL PROTECTED]> wrote:
> 2006/8/30, backyard <[EMAIL PROTECTED]>:
> >
> >
> >
> > --- Jordi Carrillo <[EMAIL PROTECTED]> wrote:
> >
> > > I've read that SMP should be disabled for
> > > performance issues (I did not know
> > > th
--- Jordi Carrillo <[EMAIL PROTECTED]> wrote:
> 2006/8/30, backyard <[EMAIL PROTECTED]>:
> >
> >
> >
> > --- Jordi Carrillo <[EMAIL PROTECTED]> wrote:
> >
> > > I've read that SMP should be disabled for
> > > performance issues (I did not know
> > > that before installing freebsd). I have a P4
>
I can't get 6.1 to even compile a new kernel on 2 different Sun
Ultra 40's Anyone have nay reason that it should not work on these machines?
Both are dul processor BTW, should I try the non MP kernel?
--
Unix is very simple, but it takes a genius to understand the simplicity.
(Dennis Ritchie)
__
did a 'make install' for linux-firefox I got an error that
libXfixes.so.3 (as part of linux-glib2, IIRC) could not be found . . .
after some googling and a few bad leads for some reason I did another
make install and got no errors . . . but now linux-firefox won't run
because libXfixes.so.3
On 2006-08-30 16:32, Martin Schweizer <[EMAIL PROTECTED]> wrote:
> Hello
>
> Which ports does I need for a cvs system (client and server)? I searched
> against "cvs" in ports but it gets a lot of links. Any hints are welcome.
You don't need any ports. CVS is part of the base system, and it can
On 30 Aug 2006, at 22:37, fbsd wrote:
Production server is running apache13/php4/mysql4.
Have fresh 6.1 install on workbench PC.
Workbench PC is being used to build apache13/php5/mysql51
environment
for working php web application writing and reading mysql database.
Installed mysql51-server the
Production server is running apache13/php4/mysql4.
Have fresh 6.1 install on workbench PC.
Workbench PC is being used to build apache13/php5/mysql51
environment
for working php web application writing and reading mysql database.
Installed mysql51-server then php5 and made sure make config had
apa
Jordi Carrillo wrote:
> Skylar,
> So, 50% is used for processes and the other 50% to handle hardware
> interrupts. Is that right?
>
I believe so, but the blurb that I read that in is from 2003. There's a
good chance someone will jump in to correct me. :)
It was in /usr/src/UPDATING:
20031022:
On Aug 30, 2006, at 12:12 PM, backyard wrote:
with HT disabling in FreeBSD is more for the security
issues about a potential exploit whereby one process
in one pipe can access the priveledged information of
a process in another pipe because the two cores share
one processor cache and thus one c
Production server is running apache13/php4/mysql4.
Have fresh 6.1 install on workbench PC.
Workbench PC is being used to build apache13/php5/mysql51
environment
for working php web application writing and reading mysql database.
Installed mysql51-server then php5 and made sure make config had
apac
Skylar,
So, 50% is used for processes and the other 50% to handle hardware
interrupts. Is that right?
2006/8/30, Skylar Thompson <[EMAIL PROTECTED]>:
Jordi Carrillo wrote:
> 2006/8/30, backyard <[EMAIL PROTECTED]>:
>>
>>
>>
>> --- Jordi Carrillo <[EMAIL PROTECTED]> wrote:
>>
>> > I've read that
Garrett Cooper wrote:
On Aug 30, 2006, at 1:28 PM, Xiao-Yong Jin wrote:
Hi, I wanna upgrade ghostscript to ghostscript-gpl-8.15 from
ghostscript-gnu-7.07. I've installed the gpl version via port. But
when I tried to pkg_delete the gnu version, it said
pkg_delete: package 'ghostscript-gnu-7.0
Jordi Carrillo wrote:
> 2006/8/30, backyard <[EMAIL PROTECTED]>:
>>
>>
>>
>> --- Jordi Carrillo <[EMAIL PROTECTED]> wrote:
>>
>> > I've read that SMP should be disabled for
>> > performance issues (I did not know
>> > that before installing freebsd). I have a P4 3GHz
>> > with hyperthreading
>> > t
I'm looking at trying to build my own customized FreeBSD install CD. The
purpose of this is to be able to install FreeBSD with customized kernel,
certain packages installed and some added scripts of my own. Being that I
have no idea how to do this I have two questions.
1. Is this feasible?
2. I
RW wrote:
> What's the canonical way of mounting the Linux procfs at boot-time?
>
> I've seen several recommendations to add the following to fstab:
>
> linproc/compat/linux/proc linprocfs rw 0 0
>
> But in a standard installation, this mount-point is really under /usr, which
>
On Aug 30, 2006, at 1:28 PM, Xiao-Yong Jin wrote:
Hi, I wanna upgrade ghostscript to ghostscript-gpl-8.15 from
ghostscript-gnu-7.07. I've installed the gpl version via port. But
when I tried to pkg_delete the gnu version, it said
pkg_delete: package 'ghostscript-gnu-7.07_15' is required by th
Ralph Ellis writes:
> Usually you have to upgrade from major release to major release
> i.e. 4.8 to 5.5, 5.5 to 6.1 etc. However, if you are only
> protecting data files then copy them to a cd, dvd or separate
> disk drive and do a clean install of 6.1. If you want to protect
> configuration
Hi, I wanna upgrade ghostscript to ghostscript-gpl-8.15 from
ghostscript-gnu-7.07. I've installed the gpl version via port. But
when I tried to pkg_delete the gnu version, it said
pkg_delete: package 'ghostscript-gnu-7.07_15' is required by these other
packages
and may not be deinstalled:
Imag
On 30 Aug 2006, at 21:15, Daniel Bitencourt Cadorin wrote:
I need to connect in a server of data base oracle 9i through the
FreeBSD.
Exists one client oracle for the FreeBSD? How I can make?
Thank you!
Daniel Bitencourt Cadorin
Hi
Theres some info here you might find useful:
http://tomclegg
What's the canonical way of mounting the Linux procfs at boot-time?
I've seen several recommendations to add the following to fstab:
linproc/compat/linux/proc linprocfs rw 0 0
But in a standard installation, this mount-point is really under /usr, which
isn't mounted until pass 2.
On Wednesday 30 August 2006 1:02 pm, Amita Bargal (ambargal) wrote:
> Hi,
>
> I have a machine which has BSD 4.8 on it. Is it possible to upgrade to
> version 6.0 without affecting/deleting/losing any files currently
> present on the machine.
>
> $ uname -a
> FreeBSD tcp-01-pc7 4.8-RELEASE FreeBSD
Hi, is there a port to only install the different font packs for
acroread7? Basically, I don't want the interface to be in other
language, but for some pdf files without embedded fonts these Asian or
European font packs provided in Acrobat's website are indeed needed.
If you are familiar with Gen
I need to connect in a server of data base oracle 9i through the FreeBSD.
Exists one client oracle for the FreeBSD? How I can make?
Thank you!
Daniel Bitencourt Cadorin
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
--- Viswas Nair <[EMAIL PROTECTED]> wrote:
> I am new to BSD and have mplayer installed
> (Gmplayer) and I do not see the
> option to play an Audio CD, only CDs, files and
> DVDs. How do I get Audio
> CD's to play? Can they be mounted, if so how? Is
> there any
> specific audio alone CD player (GUI
I want to cancel my membership as soon as possible.
Thank you, Jane
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hi,
I have a machine which has BSD 4.8 on it. Is it possible to upgrade to
version 6.0 without affecting/deleting/losing any files currently
present on the machine.
$ uname -a
FreeBSD tcp-01-pc7 4.8-RELEASE FreeBSD 4.8-RELEASE #1: Fri Jul 18
10:43:30 PDT 2003
[EMAIL PROTECTED]:/usr/devtest/kame
2006/8/30, backyard <[EMAIL PROTECTED]>:
--- Jordi Carrillo <[EMAIL PROTECTED]> wrote:
> I've read that SMP should be disabled for
> performance issues (I did not know
> that before installing freebsd). I have a P4 3GHz
> with hyperthreading
> technology. I have the SMP-GENERIC kernel and it
--- Jordi Carrillo <[EMAIL PROTECTED]> wrote:
> I've read that SMP should be disabled for
> performance issues (I did not know
> that before installing freebsd). I have a P4 3GHz
> with hyperthreading
> technology. I have the SMP-GENERIC kernel and it
> only launches one cpu. So,
> I've decided
On Wednesday 30 August 2006 20:20, Jordi Carrillo wrote:
> I've read that SMP should be disabled for performance issues (I did not
> know that before installing freebsd). I have a P4 3GHz with hyperthreading
> technology. I have the SMP-GENERIC kernel and it only launches one cpu. So,
> I've decide
Karol Kwiatkowski wrote:
On 30/08/2006 19:35, Philip Hallstrom wrote:
I've got a freebsd server in the garage that has a low end
soundblaster (I think) card in it that I've been using to play music.
Works just fine. We moved and now I'd like to be able to have
different music play in differen
Hi all,
I'm trying to write a DVD-RW with a directory created with
rsnapshot, but there are some problem with mkisofs: "Not enough memory"
# mkisofs -R -J -o /data/rsnap.iso /data/.snapshots
mkisofs: Cannot allocate memory. Not enough memory
The machine has more then 350MB of free memory an
I am trying to add my HP LaserJet 1020 printer via CUPS page at
http://localhost:631/admin.
CUPS will not accept my root username & password to install the driver.
Any ideas?
lptest > /dev/ulpt0 returns:
/dev/ulpt0: Device busy.
grep ulpt /var/run/dmesg.boot returns:
module_register: modu
[format recovered, please don't top post to the list]
On 30/08/2006 21:05, Jordi Carrillo wrote:
>> -- Forwarded message --
>> From: Jason Morgan <[EMAIL PROTECTED]>
>> Date: 30/08/2006 16:52
>> Subject: Re: Install then reboot
>> To: freebsd-questions@freebsd.org
>>
>> On Wed, Au
On 30/08/2006 19:35, Philip Hallstrom wrote:
>>> I've got a freebsd server in the garage that has a low end
>>> soundblaster (I think) card in it that I've been using to play music.
>>> Works just fine. We moved and now I'd like to be able to have
>>> different music play in different rooms (living
This message confirms your cancellation of the free weekly
"Surfing the Net with Kids" newsletter.
.
RSS EDITION
.
If you would prefer an RSS edition of the newsletter, you will find it
at http://www.surfnetkids.com/newsletter-rss.xm
In fact when compiling, freebsd uses lots of RAM, but then when finished, I
don't see it frees the memory used. I see the ram consumption from the gnome
system monitor. In any case, I have not payed a lot of attention since I
haven't reach the point where freebsd has the need to use swap.
Thanks a
On Wed, Aug 30, 2006 at 07:58:58PM +0200, Jordi Carrillo wrote:
> When I compile a new program from ports, freebsd takes quite a lot of RAM.
> Is that something right or it's a flaw? It does happen to you? The main
> problem is that not all memory used in compilation is freed, so it can be a
> prob
On 8/30/06, Lowell Gilbert <[EMAIL PROTECTED]> wrote:
"freebsd neophyte" <[EMAIL PROTECTED]> writes:
>
> ...snip...
>
> ---
> # make world DESTDIR=/usr/jail/bind9
>
> --
Building an up-to-date make(1)
> -
fbsd wrote:
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Bill Moran
> Sent: Wednesday, August 30, 2006 1:14 PM
> To: Daniel Gerzo
> Cc: fbsd; [EMAIL PROTECTED] ORG
> Subject: Re: problem with phpMyAdmin port
>
>
> In response to Daniel Gerzo <[EM
Hello Bill
Thank you for the hint.
Am Wed, Aug 30, 2006 at 10:35:28AM -0400 Bill Moran schrieb:
> In response to Martin Schweizer <[EMAIL PROTECTED]>:
>
> > Hello
> >
> > Which ports does I need for a cvs system (client and server)? I searched
> > against "cvs" in ports but it gets a lot of li
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bill Moran
Sent: Wednesday, August 30, 2006 1:14 PM
To: Daniel Gerzo
Cc: fbsd; [EMAIL PROTECTED] ORG
Subject: Re: problem with phpMyAdmin port
In response to Daniel Gerzo <[EMAIL PROTECTED]>:
> > When I try
When I compile a new program from ports, freebsd takes quite a lot of RAM.
Is that something right or it's a flaw? It does happen to you? The main
problem is that not all memory used in compilation is freed, so it can be a
problem (meaning rebooting) after compiling a very big software such as
ope
I have a Dell D810 Latitude.
I don't necessarilly want to get "multiple monitors" working, but I do
want to get an external monitor working.
I put my laptop in the docking station, and with Windows or almost any
version of Linux, I can do "Function F8" and it will go to the external
display. How
Jordi Carrillo wrote:
> I've read that SMP should be disabled for performance issues (I did
> not know
> that before installing freebsd). I have a P4 3GHz with hyperthreading
> technology. I have the SMP-GENERIC kernel and it only launches one
> cpu. So,
> I've decided to disable SMP from BIOS. Is
I've got a freebsd server in the garage that has a low end
soundblaster (I think) card in it that I've been using to play music.
Works just fine. We moved and now I'd like to be able to have
different music play in different rooms (living, family, and outside).
I can do all the other wiring for sp
I've read that SMP should be disabled for performance issues (I did not know
that before installing freebsd). I have a P4 3GHz with hyperthreading
technology. I have the SMP-GENERIC kernel and it only launches one cpu. So,
I've decided to disable SMP from BIOS. Is that ok?, knowing that I have a
S
In response to Daniel Gerzo <[EMAIL PROTECTED]>:
> > When I try to run phpMyAdmin I get this error
> > Fatal error: Call to undefined function preg_replace() in
> > /usr/local/www/phpMyAdmin/libraries/sanitizing.lib.php on line 37
>
> this is not error of the port. You are missing PCRE php extens
Just downloaded phpMyAdmin port make files on 6.1 system and ran
"make install clear".
Already had php5 and mysql5 previously installed and working.
The phpMyAdmin port installed fine.
Problem is the phpMyAdmin directory was installed as /www/phpMyAdmin
and it should have been /usr/local/www/php
Hello fbsd,
Wednesday, August 30, 2006, 6:18:05 PM, you wrote:
> Just downloaded phpMyAdmin port make files on 6.1 system and ran
> "make install clear".
> Already had php5 and mysql5 previously installed and working.
> The phpMyAdmin port installed fine.
> Problem is the phpMyAdmin directory
nevermind, my own dumb mistake with the connection string, first I
didn't have the right stuff for logging into a domain, second time
around when that was fixed, I had a "/" where there should have been
an "@".
Just point, laugh and make funny faces at me, I deserve it for the latter error.
Than
Hi.
I'm trying to install apache22 on a 6.1 machine.
Here what I get since days:
=> MD5 Checksum OK for apache22/httpd-2.2.3.tar.bz2.
=> SHA256 Checksum OK for apache22/httpd-2.2.3.tar.bz2.
=> MD5 Checksum mismatch for apache22/apr_dbd_mysql.rev-50.c.
=> SHA256 Checksum mismatch for apache22/apr
On Wed, Aug 30, 2006 at 11:06:39AM -0400, Ensel Sharon wrote:
> I want to delete some remote files with a wildcard, running 'rm' over ssh.
> [...]
> So what is the _right_ way to do this ?
ssh [EMAIL PROTECTED] 'sh -c "rm -rf "/some/testdir/*"'
As * has to be expanded before is sent to rm.
Bye.
On 8/30/06, Tom Grove <[EMAIL PROTECTED]> wrote:
I was reading http://www.bsdnews.com and ran across an article about a
memory leak in php and mysql on FreeBSD. This is fairly concerning
considering I run quite a few servers with this setup. I haven't been
able to find much documentation regard
--On Wednesday, August 30, 2006 11:06:39 -0400 Ensel Sharon <[EMAIL PROTECTED]>
wrote:
>
> I want to delete some remote files with a wildcard, running 'rm' over ssh.
>
> The obvious syntax doesn't work at all - it doesn't even make an ssh
> connection - I think it is interpreting the wildcard l
Philip Hallstrom <[EMAIL PROTECTED]> writes:
> Hi all -
>
> I've got a freebsd server in the garage that has a low end
> soundblaster (I think) card in it that I've been using to play music.
> Works just fine. We moved and now I'd like to be able to have
> different music play in different rooms (
In response to Ensel Sharon <[EMAIL PROTECTED]>:
>
> I want to delete some remote files with a wildcard, running 'rm' over ssh.
>
> The obvious syntax doesn't work at all - it doesn't even make an ssh
> connection - I think it is interpreting the wildcard locally:
>
> # ssh [EMAIL PROTECTED] rm
"freebsd neophyte" <[EMAIL PROTECTED]> writes:
> i'm following the following tutorial to create bind9 under a jail:
>
> http://www.onlamp.com/pub/a/bsd/2003/09/04/jails.html
>
> in doing so, i'm getting the following error:
>
> ---
> # make world DESTDIR=/usr/jail/bind9
>
> ---
I want to delete some remote files with a wildcard, running 'rm' over ssh.
The obvious syntax doesn't work at all - it doesn't even make an ssh
connection - I think it is interpreting the wildcard locally:
# ssh [EMAIL PROTECTED] rm -rf /some/testdir/*
ssh: No match.
Then, these combinations of
I'm trying to get a Kingston 1GB 50x 'elite pro' Compact Flash working
as ad1 initially, and then move it to ad0 to install FreeBSD-6.1 on it.
The hardware is an Soekris net4801 and it's known that CF cards usually
only work in PIO mode. A line in /boot/loader.conf saying:
hw.ata.ata_dma="0" is u
Martin Schweizer wrote:
Hello
Which ports does I need for a cvs system (client and server)? I searched
against "cvs" in ports but it gets a lot of links. Any hints are welcome.
cvs is already in the base system.
//Niclas
--
___
freebsd-questions@f
Martin Schweizer wrote:
Hello
Which ports does I need for a cvs system (client and server)? I searched
against "cvs" in ports but it gets a lot of links. Any hints are welcome.
Hi,
cvs is part of the base system. You can just start using it, no need to
install everything. See cvs(1) for
In response to Tom Grove <[EMAIL PROTECTED]>:
> I was reading http://www.bsdnews.com and ran across an article about a
> memory leak in php and mysql on FreeBSD. This is fairly concerning
> considering I run quite a few servers with this setup. I haven't been
> able to find much documentation
I'm trying to connect my FreeBSD notebook to some shares at work,
which are on an EMC Celerra box, which uses the windows SMB protocol,
but I keep getting an odd error, which right now I'm suspecting is an
incompatability between the two, and I was wondering if anyone here
has had previous experie
In response to Martin Schweizer <[EMAIL PROTECTED]>:
> Hello
>
> Which ports does I need for a cvs system (client and server)? I searched
> against "cvs" in ports but it gets a lot of links. Any hints are welcome.
CVS is included in the base FreeBSD system.
The ports you see are various addons
Hello
Which ports does I need for a cvs system (client and server)? I searched
against "cvs" in ports but it gets a lot of links. Any hints are welcome.
--
Regards
Martin Schweizer
<[EMAIL PROTECTED]>
PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon
Tel. +41 55 243 30 00; Fax
I was reading http://www.bsdnews.com and ran across an article about a
memory leak in php and mysql on FreeBSD. This is fairly concerning
considering I run quite a few servers with this setup. I haven't been
able to find much documentation regarding this subject.
It has been reported as a "p
I would check the errat on the S3 you are using. It sounds like there may
be some kernel/system changes you may need to make since your lockups are
from going back to text mode from graphics mode. It is likely some
conflict this is causing is hardware related.
-Derek
On Wed, 30 Aug
On Tue, 29 Aug 2006, Nazar wrote:
Alright guys. This is probably the complete newbie question, but I just cant
fight a straight answer on google. The questions usually I found, werent
answered. Anyways, to the point. I'm behind router. Cable modem -> Router ->
pc's. Basic home setup. I set up
You might want to look at /etc/rc.conf.local, though I would consider
just writing a script to handle what you want to do since rc.conf.local
isn't really the FreeBSD way, seems to be more of an OpenBSD approach.
See: 'man rc'
cheers,
Gabriel
--
Gabriel O'Brien
IT Analyst, MPS-EN-CBC.ca
w: 41
Mikhail,
> I suspect the problem does not lie in FreeBSD, but elsewhere. Have you
> tried using different floppy discs? Specially another brand? Maybe the
> cable connecting your floppy drive is playing on you or even the drive
> itself is faulty.
If this were the case, would I notice it with Lin
Dan Mahoney, System Admin wrote:
Hey all,
Are there any supported formats for INCLUDES in /etc/rc.conf such that
I can drop default configs into /etc/rc.conf and then have files in a
certain directory (ala includerc) override them? Basically, I'd like
to do mass-updates of several dozen mac
[EMAIL PROTECTED] wrote:
> If your DVD player can't play mp3s, then it can't play DVDs. ;)
> Remember, mp3s are the audio layer of mpegs. And DVD videos consist of
> mpegs.
For a DVD-Video disc, the audio formats are PCM (plain old wav,
effectively), AC-3 (dolby digital) and MPEG-1 Audio Layer II
--On onsdag, augusti 30, 2006 12.40.42 +0400 [EMAIL PROTECTED] wrote:
Hi!
I need to get a Helix server (hlx server, real media server) running on
FreeBSD @ amd64. Anyone tried this before? Seems there are no good
options, really, and I have had trouble running the linux version as
well. Jus
1 - 100 of 108 matches
Mail list logo
