On Sat, 2005-06-04 at 21:26, [EMAIL PROTECTED] wrote:
> First things first. What module did you load for the card. My guess (because
> I
> did this myself) was to use "ATI", but you need "RADEON". And, in the
> sysinstall setup for video, you most likely selected "vga", sometimes "vesa"
> works
Karan Gupta wrote:
> Hi
> I have a router setup with fBSD
> uname output
> FreeBSD aaa.xxx.com 5.4-RELEASE FreeBSD 5.4-RELEASE #0: Wed May 25
> 15:08:04 PDT 2005 root@:/usr/src/sys/i386/compile/EFKERNEL i386
>
> When i ping this machine from different networks i get the foll
Hi
I have a router setup with fBSD
uname output
FreeBSD aaa.xxx.com 5.4-RELEASE FreeBSD 5.4-RELEASE #0: Wed May 25
15:08:04 PDT 2005 root@:/usr/src/sys/i386/compile/EFKERNEL i386
When i ping this machine from different networks i get the following timings
Reply from xxx.aa
Hello all,
I wanted to start out by saying thank you to everyone who has given me
help and has contributed to making this a good OS and community. Down to
business... I just installed Gnumeric from Ports and when I invoke it,
it appears to work fine, but I do see warnings printed (see below).
On Fri, 3 Jun 2005, John Larson wrote:
I am trying to configure sendmail. I have a lan in my
room with a personal freebsd 4.11 apache2 web server
with one client machine connected directly to it. when
I use a form to send mail to the server it is marked
as undeliverable to the username and ends
On 06/04/05 10:01 PM, Louis LeBlanc sat at the `puter and typed:
> On 06/04/05 07:06 PM, Robert Slade sat at the `puter and typed:
> > Hiya,
> >
> > I've been trying to figure this out. I've tried googling for an answer
> > but only got confused.
> >
> > I have a P4 machine with an ATI Radeon 920
On 06/04/05 07:06 PM, Robert Slade sat at the `puter and typed:
> Hiya,
>
> I've been trying to figure this out. I've tried googling for an answer
> but only got confused.
>
> I have a P4 machine with an ATI Radeon 9200 with 128Mbyte of memory
> built into the motherboard. I have not been able t
On Saturday 04 June 2005 06:28 pm, Vizion wrote:
> On Saturday 04 June 2005 16:27, the author Mike Jeays contributed to the
> dialogue on-
>
> JDK 1.5 port fails to compile:
> >I downloaded the required sources for jdk15, but the port fails to
> >compile; here are the final messages. Did I fail
On Saturday 04 June 2005 17:30, the author Gerard Seibert contributed to the
dialogue on-
Unable to build PORT:
>I am attempting to update this port:
>
>apr-nothr-db4-1.0.1_1
>
>with this port:
>
>apr-nothr-gdbm-db4-1.0.1_1
>
>In the Makefile there is listed a 'CONFLICKS = apr-*'
>
>I have not
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Gerard Seibert wrote:
| I am attempting to update this port:
|
| apr-nothr-db4-1.0.1_1
|
| with this port:
|
| apr-nothr-gdbm-db4-1.0.1_1
|
| In the Makefile there is listed a 'CONFLICKS = apr-*'
|
| I have not been able to build this port, since it s
I am attempting to update this port:
apr-nothr-db4-1.0.1_1
with this port:
apr-nothr-gdbm-db4-1.0.1_1
In the Makefile there is listed a 'CONFLICKS = apr-*'
I have not been able to build this port, since it stops with an error
code. Should I delete the old port prior to attempting to build th
> > sshd is running on the affected machines
> >
> > no errors on console or logs, just times out waiting for
> > the password prompt. interestingly: when investigating this
> > at the console, attempting ssh sessions from the db server
> > and backup server to the file server (these two are 'deep
On Saturday 04 June 2005 16:27, the author Mike Jeays contributed to the
dialogue on-
JDK 1.5 port fails to compile:
>I downloaded the required sources for jdk15, but the port fails to
>compile; here are the final messages. Did I fail to do something
>important?
>
> FreeBSD 5.3, with an up to
I downloaded the required sources for jdk15, but the port fails to
compile; here are the final messages. Did I fail to do something
important?
FreeBSD 5.3, with an up to date ports tree.
../../../src/share/classes/com/sun/jmx/mbeanserver/MBeanInstantiatorImpl.java:162:
warning: non-varargs c
John Brooks wrote:
> sshd is running on the affected machines
>
> no errors on console or logs, just times out waiting for
> the password prompt. interestingly: when investigating this
> at the console, attempting ssh sessions from the db server
> and backup server to the file server (these two a
sshd is running on the affected machines
no errors on console or logs, just times out waiting for
the password prompt. interestingly: when investigating this
at the console, attempting ssh sessions from the db server
and backup server to the file server (these two are 'deeper'
in the network so th
Hi
During the past week I have posted a couple of reports about the bug referred
to below on the freebsd-java mailing list ([EMAIL PROTECTED] is also listed as
the maintainer for this port) but so far not received any acknowledgement or
response so I guess either the person who has previously m
First things first. What module did you load for the card. My guess (because I
did this myself) was to use "ATI", but you need "RADEON". And, in the
sysinstall setup for video, you most likely selected "vga", sometimes "vesa"
works better!
Now the fun part. If you look in Xorg.conf, you will se
At 09:05 AM 6/4/2005, you wrote:
Yesterday at about noon, all four freebsd servers on a clients lan
quit accepting ssh connections. All were running 4.11-release-p4,
and had been cvsup'd at the same time from cvs-10, cvs-11, or
cvs-12. Outbound ssh (from console of the affected boxes) works as
ex
#
rc.conf
#
linux_enable="YES"
moused_enable="YES"
moused_port="/dev/psm0"
moused_type="auto"
hostname="leopardo.regi.org"
nfs_server_enable="YES"
nfs_server_flags="-u -t -6"
rpcbind_enable="YES"
usbd_enable="YES"
ifconfig_em0=
On Sat, Jun 04, 2005 at 08:08:04PM +0200, Kövesdán Gábor wrote:
> Hello,
>
> I'm about to use ntpd to synchronise my server's clock to a time server
> and also provide time server, but I use securelevel 2 that denies to
> change the system time with a step greater than 1s. So, I'm afraid it
> c
Hello,
I'm about to use ntpd to synchronise my server's clock to a time server
and also provide time server, but I use securelevel 2 that denies to
change the system time with a step greater than 1s. So, I'm afraid it
could work with securelevel 2. Is there any method to get them work with
ea
tried to upgrade with cvsup and everything always giving me the same error ..
what should i do ?
cd /usr/src/etc; install -o root -g wheel -m 444 amd.map apmd.conf auth.conf
crontab csh.cshrc csh.login csh.logout dhclient.conf dm.conf fbtab ftpusers
gettytab group hosts hosts.allow host.co
Hiya,
I've been trying to figure this out. I've tried googling for an answer
but only got confused.
I have a P4 machine with an ATI Radeon 9200 with 128Mbyte of memory
built into the motherboard. I have not been able to get Xwindows to run
at any greater resolution than basic VGA. All I seam to
Hi,
I'm trying to setup my Card Dwl-G520 in FreeBSD 5.4 and not working.
I try:
kldload if_ath.ko
and dmesg output is:
ath0: mem 0xff7f-0xff7f irq 21 at device 0.0 on pci6
ath0: unable to attach hardware; HAL status 13
device_attach: ath0 attach returned 6
error:
HAL status 13=Hardwa
On Jun 4, 2005, at 12:42 AM, Supote Lee wrote:
What if I using both of them together ? I mean using both
DDR-266 and DDR-400 at the same time. Can I ?
Yes, if you make sure that both DIMMs accept the same voltage range.
The memory should work at DDR-266 speeds, but you may need to back
off
On Saturday 04 June 2005 12:16 pm, you wrote:
> On Jun 3, 2005, at 6:17 AM, Craig Kleski wrote:
> > On Friday 03 June 2005 11:46 am, Anthony M. Agelastos wrote:
> >> Hello all,
> >>
> >> I am experiencing some problems with Maxima, namely with the
> >> plotting and with some of the self tests. For
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Yesterday at about noon, all four freebsd servers on a clients lan
quit accepting ssh connections. All were running 4.11-release-p4,
and had been cvsup'd at the same time from cvs-10, cvs-11, or
cvs-12. Outbound ssh (from console of the affected boxes) works as
expected, both to local openbsd boxe
Raciel Perez Hernandez wrote:
Helo list I have postfix installed and working, it only have a problem, I
connect to internet trougth a leased line of 144Kbs but this line
sometimes gets unstable and goes down, so if the connection is down and
somebody try to send a message, postfix tells me (Serv
On Friday 03 June 2005 10:44 am, jose luis wrote:
> hi
> i need help.
> my english is little, then i hope that you understand me.
> well i use freebsd 5.3 i installed xorg and kde.
> i execute startkde and it appears this: kpersonalizer: can not
> connect Xserver i execute kdm or xdm and it appear
Hello,
I installed my FBSD 5.4. I have a DSL internet conection. It is configurated as
DHCP but it works slowly.
What could I do ??
Thanks,
Regi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-question
On Fri, 2005-06-03 at 10:03 -0400, fbsd_user wrote:
> The abuse-reporting-system scripts can be downloaded from
>
> http://www.unixguide.net/freebsd/fbsd_installguide/index.phpor
> http://freebsd.packards-home.net/index.php
>
> It was submitted to FreeBSD as a port but not accepted yet.
>
U
hi
i need help.
my english is little, then i hope that you understand me.
well i use freebsd 5.3 i installed xorg and kde.
i execute startkde and it appears this: kpersonalizer: can not connect Xserver
i execute kdm or xdm and it appear welcome freebsd later i have to log the
user, when i do th
On Jun 3, 2005, at 6:17 AM, Craig Kleski wrote:
On Friday 03 June 2005 11:46 am, Anthony M. Agelastos wrote:
Hello all,
I am experiencing some problems with Maxima, namely with the plotting
and with some of the self tests. For the former, it only creates the
plots in an external Gnuplot wind
Hi folks,
I have a 5200C scanner which is detected by FreeBSD.
uscanner0: Hewlett-Packard HP ScanJet 5200C, rev 1.00/1.00, addr 2
[EMAIL PROTECTED] usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x),
nVidia(0x), rev 1.00
port 1 powered
port
On Saturday 04 June 2005 05:56:05, dave wrote:
> Hello,
> Trying to set up a jail on 5.4-RELEASE. I've installed the
> 5_4_0_RELEASE source from cvsup and have successfully run:
> make buildworld DESTDIR=/usr/local/jails/jail1
The fine manual says "make world DESTDIR=$D". If you run buildworld
Does anyone know a place where i can download diablo-caffe-1.3.1-0.tar.bz2 ?
the main usual site is down/not working
--
Yours Sincerely
Shinjii
http://www.shinji.nq.nu
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/lis
38 matches
Mail list logo
