Joshua Tinnin wrote:
On Saturday 27 November 2004 11:27 pm, Rem Roberti [1]<[EMAIL PROTECTED]>
wrote:
I sent this message to Joshua back channel, and realized that I should
have also sent it to the group.
Rem
Thanks,
On Saturday 27 November 2004 11:27 pm, Rem Roberti <[EMAIL PROTECTED]>
wrote:
> I sent this message to Joshua back channel, and realized that I should
> have also sent it to the group.
>
> Rem
>
>
>
> Thanks, Joshua. Here's t
See
http://www.freebsd.org/cgi/man.cgi?query=acpi&sektion=4&manpath=FreeBSD+5.3-
RELEASE
particularly the section:
To disable the acpi driver completely, set the kernel environment vari-
able hint.acpi.0.disabled to 1.
This should be done in the loader prompt. When you get the message
I sent this message to Joshua back channel, and realized that I should
have also sent it to the group.
Rem
Thanks, Joshua. Here's the requested stuff, starting with the output of
uname -a:
FreeBSD x1-6-00-0c-76-90-8a-cd.at
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of J W
> Sent: Saturday, November 27, 2004 5:36 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Kevin Kinsey's RE:FreeBSD and NetZero
>
>
> >>I have NetZero as my Dial-Up ISP. I would love to use freebsd as my
I'm bit of a newbe myself and had the same problems. Finally I decided NOT to
comment out those options in my copy of the GENERIC file which related to
hardware options I don't have.
So if you have been commenting out all those hardware options in the kernel
configuration file for hardware you
On Saturday 27 November 2004 10:29 pm, Rem Roberti <[EMAIL PROTECTED]>
wrote:
>Hi Everyone,
>As a rank newbie I have been trying to install a custom kernel, and
>have attempted to follow the directions in the handbook. But I just
>can't get the thing to "make". The handbook also
Hi Everyone,
As a rank newbie I have been trying to install a custom kernel, and
have attempted to follow the directions in the handbook. But I just
can't get the thing to "make". The handbook also says that it is okay
to send the configuration file to this list for analysis.
N
On Sun, Nov 28, 2004 at 03:31:35AM +0200, Giorgos Keramidas wrote:
: AFAIK, rule 00300 will never be hit by packets going out tun0 as long as
: you also have rule 00200 in there.
Hmmm here's a run after having the laptop running for a bit. I don't
see why 200 doesn't cover the case either.
[
On 2004-11-27 22:48, RL <[EMAIL PROTECTED]> wrote:
> This is my fist time building a kernel. I CVSUP'ed to the latest
> source (on RELENG_5_3) on my FDBSD 5.3 system. I edited some things in
> the config file and I did a make buildkernel KERNCONF=MYKERNEL. It
> compiles for a while, but errors; I
This is my fist time building a kernel. I CVSUP'ed to the latest
source (on RELENG_5_3) on my FDBSD 5.3 system. I edited some things in
the config file and I did a make buildkernel KERNCONF=MYKERNEL. It
compiles for a while, but errors; I get this (a snippet):
: undefined reference to `xpt_done'
On Saturday 27 November 2004 02:12 pm, gabriel wrote:
> Nice, thanks for the replies guys. I was looking into this printer.
>
> http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/18972-238444-410635-120
>85-f57-90805-90810-90811.html
>
> HP PSC 2175 All-in-One (Q3068A)
>
>
I don't remember the source;
>>I have NetZero as my Dial-Up ISP. I would love to use freebsd as my
>>gateway, ratehr than use windows with ICS enabled. Is there a way to
>>work around the proprietary software used by NetZero, or has any one
>>seen a way to make freebsd work with netzero?
>>Thank You,
>>IDESpinner
>>
>
>I
On 2004-11-27 21:56, Jonathon McKitrick <[EMAIL PROTECTED]> wrote:
> [EMAIL PROTECTED]:~# ipfw show
> 00100 0 0 check-state
> 00200 2 144 allow ip from me to any keep-state out xmit tun0
> 00300 0 0 allow ip from any to any keep-state out xmit tun0
> 00400 0 0 deny tcp from any to any in recv
Here is the situation, I run bind as a root nameserver and all appears to be
operating normally (no apparent problems). But, log_in_vain is reporting to
messages a few times per second that port 53 is being queried and nothing
"appears" to be listing on it. I monitored my forwarders ip addresses a
Jonathon McKitrick wrote:
Here are my rules:
[EMAIL PROTECTED]:~# ipfw show
00100 0 0 check-state
00200 2 144 allow ip from me to any keep-state out xmit tun0
00300 0 0 allow ip from any to any keep-state out xmit tun0
00400 0 0 deny tcp from any to any in recv tun0 established
00500 0 0 al
I have a recently purchased Toshiba laptop with FreeBSD 5.3x on it.
It works well, but neither my usb ports nor pc-card slot seem to
work. Both seem to be recognized, but neither are available.
In the case of the usb, I can load usbd. However, when I plug or
unplug usb devices in, neither happe
On Sun, 28 Nov 2004 09:25, Adam Fabian wrote:
> I've been sticking options like WITHOUT_TTF_BYTECODE_ENABLED=yes (for
> freetype2) in /etc/make.conf. It's been working, for the actual
> building of the port. The downshot is that it seems to drive the
> package tools nuts. (portupgrade makes stran
I've been sticking options like WITHOUT_TTF_BYTECODE_ENABLED=yes (for
freetype2) in /etc/make.conf. It's been working, for the actual
building of the port. The downshot is that it seems to drive the
package tools nuts. (portupgrade makes strange errors, make index
fails). Is there any other/bett
On Saturday, 27 November 2004 at 23:53:06 +0100, Kees Plonsz wrote:
> Greg 'groggy' Lehey wrote:
>
> A keyboard type was not specified, and the vendor ID string,
> "The X.Org Foundation" is not recognized.
>
> You got scared off by that warning message.
> The programs works fine, I just prog
Greg 'groggy' Lehey wrote:
A keyboard type was not specified, and the vendor ID string,
"The X.Org Foundation" is not recognized.
You got scared off by that warning message.
The programs works fine, I just programmed
control-return into a "+" sign.
On Saturday, 27 November 2004 at 20:08:39 +0100, Kees Plonsz wrote:
> Josh Paetzel wrote:
>
>> I'm trying to set up a keybinding in X. I would like Right Shift +
>> Enter to be treated the same way that Enter is when pressed alone.
>> Right now pressing Right Shift + Enter doesn't appear to do any
Adam Stroud wrote:
> I did not try that. When I booted into single user more again and tried
> the tunefs -a enable / I get a messaged saying that acl was already
> enabled. Strange.
>
The only hope for you is that the enable bit for acl was set, but
not yet read by the system. I think you have
Mark Ovens wrote:
Trey Sizemore wrote:
I've just installed FreeBSD 5.3 on my desktop machine (P4 2.8GHz with
512MB RAM) and cannot get my mouse pointer to move in KDE. It is a
Microsoft Wireless Optical 2.0 mouse (USB) and I have the following
section in my /etc/X11/xorg.conf file:
Driver "mou
I did not try that. When I booted into single user more again and tried
the tunefs -a enable / I get a messaged saying that acl was already
enabled. Strange.
A
Kees Plonsz wrote:
On Saturday 27 November 2004 22:58, Adam Stroud wrote:
I dont think the acl got enabled, here is my output from
Daan Vreeken [PA4DAN] wrote:
On Saturday 27 November 2004 21:28, Trey Sizemore wrote:
I've just installed FreeBSD 5.3 on my desktop machine (P4 2.8GHz with
512MB RAM) and cannot get my mouse pointer to move in KDE. It is a
Microsoft Wireless Optical 2.0 mouse (USB) and I have the following
sect
I dont think the acl got enabled, here is my output from mount:
/dev/ad0s1a on / (ufs, NFS exported, local)
Kees Plonsz wrote:
Adam Stroud wrote:
Kees:
You were right, I did not umount the filesystem first, I dropped into
single user mode and I thought that did unmount the filesystem. When I
bo
Here are my rules:
[EMAIL PROTECTED]:~# ipfw show
00100 0 0 check-state
00200 2 144 allow ip from me to any keep-state out xmit tun0
00300 0 0 allow ip from any to any keep-state out xmit tun0
00400 0 0 deny tcp from any to any in recv tun0 established
00500 0 0 allow ip from any to any v
isn't that DNS?
On Sat, 27 Nov 2004 16:44:24 -0500, Thomas S. Crum - AAA Web Solution,
Inc. <[EMAIL PROTECTED]> wrote:
> Here is the situation, I run bind as a root nameserver and all appears to be
> operating normally (no apparent problems). But, log_in_vain is reporting to
> messages a few tim
Here is the situation, I run bind as a root nameserver and all appears to be
operating normally (no apparent problems). But, log_in_vain is reporting to
messages a few times per second that port 53 is being queried and nothing
"appears" to be listing on it. I monitored my forwarders ip addresses a
Trey Sizemore wrote:
I've just installed FreeBSD 5.3 on my desktop machine (P4 2.8GHz with
512MB RAM) and cannot get my mouse pointer to move in KDE. It is a
Microsoft Wireless Optical 2.0 mouse (USB) and I have the following
section in my /etc/X11/xorg.conf file:
Driver "mouse"
Option "Protoc
On Sat, 27 Nov 2004, John Mills wrote:
> Freebies -
>
> On Sat, 27 Nov 2004, Conrad J. Sabatier wrote:
>
> > On Sat, 27 Nov 2004 09:43:17 +0100, Gert Cuykens
> > <[EMAIL PROTECTED]> wrote:
> >
> > > "A Makefile rule that typically scans all C/C++ source files in a
> > > directory, and generates
Hello,
Using a FreeBSD 4.6 CD I have, I'd like to install on an
older system (P200). The machine has a 4 GB IDE drive and
another 4 Gb attached via SCSI. These seem to be recognised
as da0 and ad0. The SCSI adapter has no ROM, and is not
directly bootable. I thus suppose FreeBSD - and any OS under
On Saturday 27 November 2004 21:28, Trey Sizemore wrote:
> I've just installed FreeBSD 5.3 on my desktop machine (P4 2.8GHz with
> 512MB RAM) and cannot get my mouse pointer to move in KDE. It is a
> Microsoft Wireless Optical 2.0 mouse (USB) and I have the following
> section in my /etc/X11/xorg.
Freebies -
On Sat, 27 Nov 2004, Conrad J. Sabatier wrote:
> On Sat, 27 Nov 2004 09:43:17 +0100, Gert Cuykens
> <[EMAIL PROTECTED]> wrote:
>
> > "A Makefile rule that typically scans all C/C++ source files in a
> > directory, and generates rules that indicate that an object file
> > depends on ce
Lowell Gilbert <[EMAIL PROTECTED]> wrote:
> Bill Moran <[EMAIL PROTECTED]> writes:
>
> > Edit /etc/ttys and mark the console "insecure" and try it again.
> >
> > You'll find you can't get in without the password when that change has
> > been made. That configuration is the correct thing to do w
Bill Moran <[EMAIL PROTECTED]> writes:
> Edit /etc/ttys and mark the console "insecure" and try it again.
>
> You'll find you can't get in without the password when that change has
> been made. That configuration is the correct thing to do when you can't
> guarantee the physical security of the
I've just installed FreeBSD 5.3 on my desktop machine (P4 2.8GHz with
512MB RAM) and cannot get my mouse pointer to move in KDE. It is a
Microsoft Wireless Optical 2.0 mouse (USB) and I have the following
section in my /etc/X11/xorg.conf file:
Driver "mouse"
Option "Protocol" "Auto"
Option "De
I noticed that when named starts during boot up, I dont seem to be able to
'send' notifies to my slave machines:
notify to x.y.71.63#53: retries exceeded
notify to x.y.71.63#53: retries exceeded
notify to x.y.71.63#53: retries exceeded
However, if I pkill named and start it manually from the comm
after thinking about the question a bit, i realized its a little vage.
i mean i have been asked to upgrade a server from 4.10 to 5.2.1 and all
i have is remote access via ssh. can it be done remotely?
Steel City Phantom wrote:
can it be done? how?
_
Nice, thanks for the replies guys. I was looking into this printer.
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/18972-238444-410635-12085-f57-90805-90810-90811.html
HP PSC 2175 All-in-One (Q3068A)
On Sat, 27 Nov 2004 20:03:39 +, Mike Woods
<[EMAIL PROTECTED]> wrote:
> gabriel wrote:
>
>
arden wrote:
hi folks
Im setting up an extra box on my home dchp network to use as an internet
station it just will not pick up an ip address by dchp even when nothing
else is on the network i can manually assign an ip with ifconfig so
pretty sure its detected ok also tried 3 different linux di
On Sat, 2004-11-27 at 11:55 -0800, gabriel wrote:
> On Sat, 27 Nov 2004 11:52:10 -0800, gabriel <[EMAIL PROTECTED]> wrote:
> > It is said that HP has good support for nix on its printers. I'm about
> > to purchase a printer thats listed on linuxprinting dot org but it
> > utilizes usb. I'll be set
gabriel wrote:
It is said that HP has good support for nix on its printers. I'm about
to purchase a printer thats listed on linuxprinting dot org but it
utilizes usb. I'll be setting it up with cups, how smart is this? I'm
gonna set it up in a network environment.
Odds are it'll show as a usb paral
Sending again as I got a response from spamcop about it not being sent.
On Sat, 27 Nov 2004 11:52:10 -0800, gabriel <[EMAIL PROTECTED]> wrote:
> It is said that HP has good support for nix on its printers. I'm about
> to purchase a printer thats listed on linuxprinting dot org but it
> utilizes us
Jeremy Faulkner wrote:
'fdisk -B' didn't work?
Nope :-( I have installed gpart, it complians*
* Warning: partition(FreeBSD/NetBSD/386BSD) starts beyond disk end.
Partition(FreeBSD/NetBSD/386BSD): invalid primary
OK.
and then guessed an empty partition table...
?
Thanks, Erik
--
Ph: +34.666334818
Erik Norgaard wrote:
Hi,
It appears that I have screwed my disk (60GB) thoroughly. I had used the
sample install.cfg for sysinstall but it has "partition=exclusive" and
not "all". I did
dd if=/dev/zero of=/dev/ad0 count=1k
as explained in the faq, and the exclusive partioning was gone.
I can r
On Sat, 27 Nov 2004 09:43:17 +0100, Gert Cuykens
<[EMAIL PROTECTED]> wrote:
> "A Makefile rule that typically scans all C/C++ source files in a
> directory, and generates rules that indicate that an object file
> depends on certain header files, and must be recompiled if they are
> recompiled."
>
Yes, you must enable the device "bpf" in the kernel before using nmap.
This also goes for things such as tcpdump, DHCPd, etc...
Matt Lager
> did i get this right: in order to use nmap i need to enable
> packet filtering because otherwise i would not have any device
> node for nmap to use?
>
> any
Hi All,
I am getting following error message while accessing mysql.
ERROR 1135: Can't create a new thread (errno 35). If you are not out of
available memory, you can consult the manual for a possible OS-dependent bug
What could be the problem? I know that the problem is due to resources are
tem
Hi,
It appears that I have screwed my disk (60GB) thoroughly. I had used the
sample install.cfg for sysinstall but it has "partition=exclusive" and
not "all". I did
dd if=/dev/zero of=/dev/ad0 count=1k
as explained in the faq, and the exclusive partioning was gone.
I can run sysinstall, slice
Josh Paetzel wrote:
> I'm trying to set up a keybinding in X. I would like Right Shift +
> Enter to be treated the same way that Enter is when pressed alone.
> Right now pressing Right Shift + Enter doesn't appear to do anything
> at all.
>
> I've read through the xset and stty man pages and did
"Vijay Anand" <[EMAIL PROTECTED]> writes:
> Hi
>
> When i try to download from cvsweb i get the following error.I checked for
> folders and permission.
>
> please help me in this regard.
>
> Error Error: Unexpected output from cvs co: cvs [checkout aborted]: Absolute
> module reference inval
I'm trying to set up a keybinding in X. I would like Right Shift +
Enter to be treated the same way that Enter is when pressed alone.
Right now pressing Right Shift + Enter doesn't appear to do anything
at all.
I've read through the xset and stty man pages and didn't spot what I
need.
A
hi folks
Im setting up an extra box on my home dchp network to use as an internet
station it just will not pick up an ip address by dchp even when nothing
else is on the network i can manually assign an ip with ifconfig so
pretty sure its detected ok also tried 3 different linux distros and get
May be, you can use some small shell script to run as getty replacement ?
It must open tty and start the clocks on it. It even will be
automatically restarted if needed by init process.
Best regards,
Alexander Derevianko
Mark Jayson Alvarez wrote:
Good day!
I'm just wondrin if its possible for me
Nikolas Britton <[EMAIL PROTECTED]> wrote:
> Andrew Lewis wrote:
>
> >Hi list,
> >
> >We have a client running a fBSD 5.2.1 box that needed its root password
> >hacked.
> >
> >I couldn't boot into single user mode w/o the root password, so I
> >installed fBSD 5.3 on another machine, and slaved the
Hello guys!
I'm trying to install galeon (the lastes port version) for like the
tenth time and as always I haven't been successfull at all. When I try
to install galeon it goes through its motions of installing
dependencies and such until it reaches libgnome-2.8.0 and well, thats
where all hell br
On Saturday 27 November 2004 17:38, Perttu Laine wrote:
> Hello!
>
> I've never used audio on freebsd and I need to know how to get
> AC'97 to work with my 5.2.1 freebsd. And with it's mplayer. So...
> where to start from? :)
>
> --
> kpn @ IRCnet
Check out:
http://www.freebsd.org/doc/en_US.ISO88
Hello!
I've never used audio on freebsd and I need to know how to get AC'97
to work with my 5.2.1 freebsd. And with it's mplayer. So... where to
start from? :)
--
kpn @ IRCnet
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo
did i get this right: in order to use nmap i need to enable
packet filtering because otherwise i would not have any device
node for nmap to use?
any hints appreciated, thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/
i learned from the 5.3 errata that raid functionality for the
above mentioned chipset was broken:
"...ata raid support is non-functional ... raid config
stored under 5.2 or prior may be corrupted"
since i had severe problems getting 5.2.1 to work reliably
(the machine would just reboot un
On Sat, 27 November, 2004 14:46, Adrian Portsmouth said:
> Dear List,
>
> I am experiencing a problem with my web site and I am not 100% sure
> whether
> it is Apache or FreeBSD related.
>
> I asked a forum to comment on my web site and one of the users there
> reported that his Norton Firewall (Us
Andrew Lewis wrote:
Hi list,
We have a client running a fBSD 5.2.1 box that needed its root password
hacked.
I couldn't boot into single user mode w/o the root password, so I
installed fBSD 5.3 on another machine, and slaved the drive from the
5.2.1 box in mine.
What?
Step 1: Boot the computer.
Dear List,
I am experiencing a problem with my web site and I am not 100% sure whether
it is Apache or FreeBSD related.
I asked a forum to comment on my web site and one of the users there
reported that his Norton Firewall (Using Firefox 1.0) blocked access to my
web site stating "Raq_Apache_dot_
Adam Stroud wrote:
> Kees:
>
> You were right, I did not umount the filesystem first, I dropped into
> single user mode and I thought that did unmount the filesystem. When I
> booted the machine into single the tunefs command seemed to work OK.
>
> However, I still dont get a "+" when I do a lo
Greetings, list!
I'm asking this question with the (very faint) hope that someone knows
of any way to help me recover my drive. Allow me to explain:
I'm dual booting Windows XP and FreeBSD/amd64 on two different physical
drives. I installed boot0 to the disk that had Windows XP on it (all on
a
Kees:
You were right, I did not umount the filesystem first, I dropped into
single user mode and I thought that did unmount the filesystem. When I
booted the machine into single the tunefs command seemed to work OK.
However, I still dont get a "+" when I do a long listing of a file and
the han
You could always insert a 5.2.1 CD, do a 'Configure' (menu) on
/stand/sysinstall, select change root passwd from the menu.
> Hi list,
>
> We have a client running a fBSD 5.2.1 box that needed its root password
> hacked.
>
> I couldn't boot into single user mode w/o the root password, so I
> instal
Adam Stroud wrote:
> All:
>
> I am trying to enable ACL support of my FreeBSD 5.3 box. I drop into
> single user mode and run the tunefs -a enable command on my partition
> and get the following:
>
> tuenfs: ACLs set
> tunefs: /dev/ad0s1a: failed to write superblock
>
> When I reboot it see
Adam Stroud wrote:
> All:
>
> I am trying to enable ACL support of my FreeBSD 5.3 box. I drop into
> single user mode and run the tunefs -a enable command on my partition
> and get the following:
>
> tuenfs: ACLs set
> tunefs: /dev/ad0s1a: failed to write superblock
>
> When I reboot it see
dear list,
i own a Netgear MA111 wireless adapter which has a Prism III chip.
FreeBSD's wi(4) driver does not support it, as it is a USB device, but
OpenBSD has support for it.
my quetion is, if there are any ongoing activities to get support for USB
based wi(4) devices into FreeBSD. if yes ...
Kent Stewart wrote:
On Friday 26 November 2004 03:16 pm, Mardoc Inc wrote:
I run a FreeBSD system at a remote site. It costs me over $4000 to
visit the site (northern arctic).
It, along with some other equipment, runs off 2 x 50 kW diesel
generators which are swapped by a mechanic once per week. T
On Fri, 26 Nov 2004 23:10:28 +0200, Giorgos Keramidas
<[EMAIL PROTECTED]> wrote:
> On 2004-11-25 20:08, Matthias Buelow <[EMAIL PROTECTED]> wrote:
> > Richard Williamson wrote:
> > > Ok, I'll recreate the original flash image to ensure it is -O 1, and
> > > then try again.
> >
> > in order to mount
Hello dear FreeBSD friends.
I am Ramiro from Spain.This is my first post to the list. I am a regular
Debian GNU/Linux user, but I have been tempted to try FreeBSD. I have
installed it successfully on my 1200 MHz Athlon computer booting from
the CDROM drive and I like it, but I can not install it
On Thursday 25 November 2004 15:22, Andrew Lewis wrote:
> Hi list,
>
> We have a client running a fBSD 5.2.1 box that needed its root password
> hacked.
>
> I couldn't boot into single user mode w/o the root password, so I
> installed fBSD 5.3 on another machine, and slaved the drive from the
> 5.2
Hi list,
We have a client running a fBSD 5.2.1 box that needed its root password
hacked.
I couldn't boot into single user mode w/o the root password, so I
installed fBSD 5.3 on another machine, and slaved the drive from the
5.2.1 box in mine.
Then I tried editting its master.passwd file and remo
"A Makefile rule that typically scans all C/C++ source files in a
directory, and generates rules that indicate that an object file
depends on certain header files, and must be recompiled if they are
recompiled."
i dont understand this. how can a object depend on something that is
not compiled yet?
Hi there
after using emule for a like 30mins
I start getting that message
I used netstat -m to track the mbuf clusters but when
I start getting the message there is only like 356
used out of 32768
- I'm using the NDIS module to load my wifi card
- I can send and recive all the info I want via http,
79 matches
Mail list logo
