I am seeing this all of a sudden (after a portupgrade -afRr):
> /usr/local/bin/perl5.8.2
/usr/libexec/ld-elf.so.1: /usr/local/bin/perl5.8.2: Undefined symbol
"PL_exit_flags"
>
Any ideas what is going on and how I can fix it?
a "make test" in the perl5.8 port/ area runs fine...
H
___
>
> > Gee, I have made a lot of bootable floppies - we used to distribute
> > our system on floppy+DAT tape - and had to format all of the floppies
> > in order to write boot images to them. Sometimes we even had to reformat
> > floppies that were preformatted from the vendor.
> If you choose to
Due to the large amount of spam I've been receiving to this e-mail address,
it is not being read anymore. If you want to reach Stan Grishin, please use
the online form at www.buddypeople.com/contactus.asp
___
[EMAIL PROTECTED] mailing list
http://lists.fr
I am currently upgrading a Sparc64 system from 5.1 to 5.2.1. buildworld was
successful, as well as the build and install of the kernel. After a
reboot, I ran installworld and received the following error message:
===> bin/csh
install -s -o root -g wheel -m 555 csh /bin
install -o root -g wheel
Hello,
Does anyone have a howto for getting the samba port configured for
jailed use? I've tried an install with the jail patch, but it blew out
stating that a jail had to be configured. Has anyone got samba working under
this configuration?
Thanks.
Dave.
__
From: "dave" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 01, 2004 3:11 PM
Subject: pkgtools.conf entry for samba
> Hello,
> Does anyone have a pkgtools.conf entry for samba? I'm trying to update
> mine, but i can not figure out how to make it stop giving me the dialog
>
I'm considering using HP Proliant DL360 and 380 G3 servers for an
high-reliability server project. As such I want to monitor at least two main
failure conditions: hard disk and power supply. The Smart Array driver
(ciss) works great in logging a drive failure. But I have found no kernel or
port too
On Sat, Apr 03, 2004 at 12:13:30PM +0930, Brian Astill wrote:
> On Fri, 2 Apr 2004 02:14 pm, Kris Kennaway wrote:
>
> > There are two errors there. Probably what you intended was for
> > MASTER_SITE_BACKUP to be set to ftp://ftp.filearena.net/..., but
> > comments are not ignored when doing line
On Fri, 2 Apr 2004 02:14 pm, Kris Kennaway wrote:
> There are two errors there. Probably what you intended was for
> MASTER_SITE_BACKUP to be set to ftp://ftp.filearena.net/..., but
> comments are not ignored when doing line continuations, so the
> variable is set to the literal next line, and th
At 11:12 AM 4/2/2004, meimi wrote:
Actually, what I want to know is the general steps for finding the problems.
Step #1 - Look in the message log (/var/log/messages), and ideally a copy
of the console output, to see why you server stopped running. (or if your
server stopped running)
The latter
Malcolm Kay wrote:
Maybe it is OK but to me the -static option at the end of the command looks
strange. And I know the documentation says that mostly the command line order
doesn't matter; but try it near the beginning.
Several of us tried and failed to get it to link statically in various
ways
On Friday 02 April 2004 07:32 pm, Kris Kennaway wrote:
> > Reading from the FreeBSD handbook on "Using the Ports Collection" leaves
> > me a bit confused wrt CVSup and portupgrade... do these utilities
> > accomplish the same thing?
>
> No, cvsup updates the files that make up the ports collection
On Fri, Apr 02, 2004 at 07:27:31PM -0600, Jay Moore wrote:
> Reading from the FreeBSD handbook on "Using the Ports Collection" leaves me a
> bit confused wrt CVSup and portupgrade... do these utilities accomplish the
> same thing?
>
> Thanks,
> Jay
> _
On Fri, Apr 02, 2004 at 07:27:31PM -0600, Jay Moore wrote:
> Reading from the FreeBSD handbook on "Using the Ports Collection" leaves me a
> bit confused wrt CVSup and portupgrade... do these utilities accomplish the
> same thing?
No, cvsup updates the files that make up the ports collection,
po
Reading from the FreeBSD handbook on "Using the Ports Collection" leaves me a
bit confused wrt CVSup and portupgrade... do these utilities accomplish the
same thing?
Thanks,
Jay
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listin
On Friday 02 April 2004 16:42, Shaun T. Erickson wrote:
> I can't get the program to link. In the output below, the things that
> c-client4.a is complaining about are found in the pam and ssl libs
> earlier in the line (I grep'd for a number of them, in /usr/lib/*.a, and
> they were found in those
> Gee, I have made a lot of bootable floppies - we used to distribute
> our system on floppy+DAT tape - and had to format all of the floppies
> in order to write boot images to them. Sometimes we even had to reformat
> floppies that were preformatted from the vendor.
If you choose to waste your t
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception. Inev
How to get the best results from FreeBSD questions.
===
Last update $Date: 2003/03/09 22:09:31 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that at
[EMAIL PROTECTED] writes:
> It has a 'RPX' module installed which enables RAID on my 8 4.3GB SCSI
> drives, apparently via an AMI MegaRAID controller. I've been able to get
> into the MegaRAID bios setup and configure an initialize a RAID volume,
> but FBSD can't find it.
>
> I've installed FBSD
On Thu, Apr 01, 2004 at 10:20:16PM -0500, Shawn Guillemette wrote:
>
>
>
> installing ImageMagick
>
> cd to /usr/ports/graphics/ImageMagick
> ran make
> ran make install and get this ...
> /usr/ports/graphics/ImageMagick# make install
> ===> Patching for ImageMagick-5.5.7.16
> ===> Applying
On Thu, Apr 01, 2004 at 10:44:12PM -0800, Paul G. LeDuc wrote:
> Is there a way to restore the make binary from the install CD without having
> to re-install the whole OS? I have had a problem with qnu make and want to
> restore the base binary if possible. Thank you for your assistance.
The ba
>
> On Fri, 2 Apr 2004 16:20:41 -0500 (EST), you wrote:
>
> >> I just purchased 5.2 FreeBSD. And with my system i can not boot from
> >> the CD. So i tried to make the floppy image and when i formatted the
> >> floppy it is only 1.38MB and i can not place the image on the disk.
> >> What should
I've run into the following problem with my ports collection. Whatever
port I'm trying to install the process stops returning this:
cd /path/to/some/port
make install
... skipped ...
make all-recursive
Making all in lib
cd: can't cd to lib
*** Error code 1
Stop in /usr/ports/g
>
> No this happens when i format the disk on Microsoft and nothing else all
> the disks are only 1.38mb. Is there another way to do it without
> formatting the disk through windows before adding the image. I have tried
> multiple disks and they all format with only 1.38mb left.
I usually forma
Hello,
This is an automated reply message. If you received email, bulk email or SPAM from
[EMAIL PROTECTED], please rest assured that it was not sent from us as we've never
created or used that email address. Most likely it was sent from someone who is using
the address illegally or fraudulent
If it's a zero channel RAID controller, it's probably not supported. I know
the Mylex Zero channel ones were very popular in this generation of machine
so that's the first thing I'd check. If the SCSI cable to your array hooks
up to the onboard controller, its zero channel (or something equally
uns
Hello,
> What is the output of uname -a?
FreeBSD cp.laws.ms 4.8-RELEASE FreeBSD 4.8-RELEASE #0: Fri May 23 11:13:23
CDT 2003
> Are you patched to the latest security release for 4.8 (p.16 or so)? PHP
has been causing people problems lately (see the archives for this list back
30-60 days), could i
On Fri, 2 Apr 2004 16:20:41 -0500 (EST), you wrote:
>> I just purchased 5.2 FreeBSD. And with my system i can not boot from
>> the CD. So i tried to make the floppy image and when i formatted the
>> floppy it is only 1.38MB and i can not place the image on the disk.
>> What should i do. Is ther
>
> I just purchased 5.2 FreeBSD. And with my system i can not boot from
> the CD. So i tried to make the floppy image and when i formatted the
> floppy it is only 1.38MB and i can not place the image on the disk.
> What should i do. Is there another way to do this.
On what system did you do t
On Fri, Apr 02, 2004 at 12:51:23PM -0500, Jesse Sheidlower wrote:
>
> I'm running FreeBSD 5.2.1 on a ThinkPad T41p. I'm using XFree86
> 4.4.0, installed from the binaries on the XFree site (the video
> card, an ATI Radeon FireGL T2, was apparently not supported with
> the radeon driver shipped wit
On Sat, Apr 3, 2004, meimi clacked the keyboard to produce:
> Hello,
> From the "messages" log, the error I found:
> /kernel: arplookup xx.xx.xx.xx failed: host is not on local network
> And warning I got
> /kernel: WARNING: / was not properly dismounted
>
> The first is I have got the wrong ne
On Fri, Apr 02, 2004 at 10:15:45PM +0200, Dag-Erling Smørgrav wrote:
: Daren Desjardins <[EMAIL PROTECTED]> writes:
: > The server is 4.9release, client is 4.9 stable. I have both base ssh and
: > openssh 3.8p1 installed, both of which have the same error connecting to
: > hosts.
:
: OK, so 4.9-RE
Hello,
From the "messages" log, the error I found:
/kernel: arplookup xx.xx.xx.xx failed: host is not on local network
And warning I got
/kernel: WARNING: / was not properly dismounted
The first is I have got the wrong netmask, but the error is always in the
log and i don't think it is the probl
I just purchased 5.2 FreeBSD. And with my system i can not boot from
the CD. So i tried to make the floppy image and when i formatted the
floppy it is only 1.38MB and i can not place the image on the disk.
What should i do. Is there another way to do this.
- Greg
---
[This E-mail scanned for vi
I wrote:
I can't get the program to link. In the output below, the things that
c-client4.a is complaining about are found in the pam and ssl libs
earlier in the line (I grep'd for a number of them, in /usr/lib/*.a, and
they were found in those two libs). I have tried many different ways of
orde
Greetings,
I have Samba installed on a Freebsd 5.1 server.
I am trying to map a share from a windows machine
so that I can copy the data. I can not change the
windows share name. It has a space in it. How
do I specify the share name in fstab.
share name: PSR COMPLETE
//[EMAIL PROTECTED]/PSR C
--- Feczak Szabolcs <[EMAIL PROTECTED]> wrote:
> On Fri, Apr 02, 2004 at 09:50:00AM -0800, Dave
> McCammon wrote:
> > I haven't seen anything back on this yet.
> > I upgraded to current after posting the dumps
> > (see
> >
>
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&selm=2004021
meimi wrote:
Hello,
Thanks everyone.
Here is the information
FreeBSD 4.8
Server specification:
PIII1.7GHz
512MB ram
80GB harddisk
The server is used for web, mail, dns and databases (mysql and postgresql).
Recently, I have recompiled PHP with option curl and openssl added.
The server is in Equini
Daren Desjardins <[EMAIL PROTECTED]> writes:
> The server is 4.9release, client is 4.9 stable. I have both base ssh and
> openssh 3.8p1 installed, both of which have the same error connecting to
> hosts.
OK, so 4.9-RELEASE can talk to 4.9-RELEASE and 4.9-STABLE can talk to
4.9-STABLE, but 4.9-STAB
Greetings:
I have been trying to get vmware3 to run in full-screen mode under
FreeBSD 5.2.x for some time now. I have searched around for people who
are having similar issues and have had no luck with the information that
I have found.
I have done enough testing to know that the issue is not rel
Howdy all,
I just inherited a Micron NetFrame MV5000 (Intel 440LX, Dual PII-300; full
specs: http://support.buympc.com/apps/complist.asp?SerialNo=1300458-0001).
It has a 'RPX' module installed which enables RAID on my 8 4.3GB SCSI
drives, apparently via an AMI MegaRAID controller. I've been able
I have just copy my files from a bootable FreeBSD3.5 CD to a dos partition. Which
bootloader should I choose to make sure my system boots to FreeBSD?
DS
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
I tried this myself and it did not work.
The server is 4.9release, client is 4.9 stable. I have both base ssh and
openssh 3.8p1 installed, both of which have the same error connecting to
hosts.
--
Server config
# HostKey for protocol version 1
HostKey /etc/ssh/ssh_host_key
# HostKeys for
Hello,
Thanks everyone.
Here is the information
FreeBSD 4.8
Server specification:
PIII1.7GHz
512MB ram
80GB harddisk
The server is used for web, mail, dns and databases (mysql and postgresql).
Recently, I have recompiled PHP with option curl and openssl added.
The server is in Equinix datacente
On Thu, Apr 01, 2004 at 08:32:25PM +0200, Peter Ulrich Kruppa wrote:
> Hi!
>
> When I click on a web radio streaming source in mozilla,
> realplayer will start but complain:
> "Some components are not availabel to provide playback of this
> presentation on your system
>
> file:///45F5C592d01"
Hello,
Thanks everyone.
Here is the information
FreeBSD 4.8
Server specification:
PIII1.7GHz
512MB ram
80GB harddisk
The server is used for web, mail, dns and databases (mysql and postgresql).
Recently, I have recompiled PHP with option curl and openssl added.
The server is in Equinix datacente
meimi <[EMAIL PROTECTED]> wrote:
Hello,
My server is down regularly. Could anyone tell what thing I should check?
Thanks
Does your system crash or shutdowns by itself.
Naveen.
Meimi
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman
on or about 04/01/04-19:28 f.johan.beisser wrote:
anyone actually have sound?
Sort of, if i turn the volume all the way up i can here
the shutter clicks on canon's web site. It is definatly worse than it
used to be, but not by much. It seems like this has always been a bit of
a problem; i just don
I have a Dell PowerEdge 400SC and am running 5.1. I am unable to get the the
integrated audio card to work. I have added "device pcm" to my kernconf and
"snd_ich_load="YES" and "snd_driver_load="YES" to loader.conf. I still have no audio.
Here is what dmesg says:
pci0: at device 31.3 (no dri
Ive been having the exact same issue, even started a thread on it with
no resolution yet.
Some findings I have made recently included taking a working ssh from a
bsd4.9 release box, copying it to the one that wasnt working, including
the config. That ssh also had the problem after copying. This se
On Apr 2, 2004, at 6:30 AM, Ivailo Bonev wrote:
How can i route packets from Internet to my private network without
exposed Internet address?
People cannot route traffic to your network unless you've got a
publicly routable IP address available for them to talk to. Talk to
your ISP, that is who
On Apr 2, 2004, at 4:23 AM, Panna wrote:
Until now I used a windows laptop with xp and the files where shared
with samba. So I thought that using an unixoid os would bring some
advantages :-)
I think that I'll use hfs+ on the emac.
[ ... ]
The freebsd server should act as mail and news-server an
On Fri, 2 Apr 2004, Panna wrote:
> I've purchased a new emac with OSX 10.3.
> It's soon to arrive and so I'm thinking about a good way of interacting
> the emac - which will be my main desktop - with my 5.2.1 server.
> Until now I used a windows laptop with xp and the files where shared
> with sa
On Friday 02 April 2004 06:43 am, Leo De Geer wrote:
> I made make buildworld and make buildkernel make installkernel with
> no errors but then I did make installworld it stopped after around 1
> min with error that file dos not exist. Now I manage to do a cvsup
> back to releng5_1 but I cannot do
On Thu, Apr 01, 2004 at 05:40:37PM -0500, [EMAIL PROTECTED] wrote:
> I'm trying to install FreeBSD on a Sun Ultra 5, but I'm pretty new at this
> stuff. I've managed to get the fbsd_bootonly CD to be the startup CD, and
> it gives me 5 display options, like VT100, xterm emulator, FreeBSD
> console,
Jonathon McKitrick <[EMAIL PROTECTED]> writes:
> Workaround?
Possibly. On the server, try adding the following two lines to
/etc/ssh/sshd_config:
HostKey /etc/ssh/ssh_host_dsa_key
HostKey /etc/ssh/ssh_host_rsa_key
then HUP or restart sshd, and try to connect. Let me know how it
works out.
I'd
I'm running FreeBSD 5.2.1 on a ThinkPad T41p. I'm using XFree86
4.4.0, installed from the binaries on the XFree site (the video
card, an ATI Radeon FireGL T2, was apparently not supported with
the radeon driver shipped with 4.3).
Initially, X was working fine, with no config file at all, yet
I've
--- Feczak Szabolcs <[EMAIL PROTECTED]> wrote:
>
http://www.mail-archive.com/[EMAIL PROTECTED]/msg60154.html
>
> Im having nearly the same thing as the above thread
> ...
> Though I have RELEASE not rc,
> any solution for this yet ?
>
> I would like to use samba and ncpfs on the machine
> and lo
I am setting up a firewall with freebsd ver. 5.2.1. In the installation guide I am
using requires 4.0 Snap Server to be installed. was unable to find it in the packages
options for ftp download.
Is Snap Serve installed by default? If not where can I find it and how do I go about
installing it
Is anyone else having the same issues that I am that are listed below? I
know that qt-x11-free-3.3.1 is looking for some sort of sound device,
and I have in my kernel file:
Device pcm0
If I run "grep pcm /var/run/dmesg.boot" I get
pcm0: port 0xdc80-0xdcbf,0xd800-0xd8ff irq 10 at
device 31.5 on
Panna wrote:
I've purchased a new emac with OSX 10.3.
...snip...
The freebsd server should act as mail and news-server and also as file
server.
Do I have to put the data on a fat32-slice?
no, use nfs
If I setup a nfs-mount on the freebsd server and copy data from OSX to
it, is the data readable
On Apr 1, 2004, at 8:40 PM, Drew Tomlinson wrote:
I haven't received any mail from any of the several FBSD lists to
which I subscribe since this morning, April 1 at around 06:00 PST. I
am receiving mail from other sources so I don't suspect my system. If
others are receiving mail, please resp
Panna wrote:
I've purchased a new emac with OSX 10.3.
It's soon to arrive and so I'm thinking about a good way of
interacting the emac - which will be my main desktop - with my 5.2.1
server.
Until now I used a windows laptop with xp and the files where shared
with samba.
So I thought that using
Sven,
I have PowerBook G4 running OS X 10.3.3 and a dual AMD Athlon system
running FBSD 4.9-STABLE. I regularly mount partitions via NFS between
these machines without a problem. With permissions set properly
drag-n-drop works great.
Alex
On Apr 2, 2004, at 4:23 AM, Panna wrote:
I've purchas
On Fri, Apr 02, 2004 at 06:13:50PM +0200, Dag-Erling Smørgrav wrote:
: Jonathon McKitrick <[EMAIL PROTECTED]> writes:
: > This might be a silly question, but is it possible that a problem with my
: > local hostname could cause the key to somehow fail validation?
:
: I don't think so.
:
: I think
So, meimi wrote:
> Hello,
> My server is down regularly. Could anyone tell what thing I should
> check?
you might start by giving us some technical details.
platform version
server and version
any modules you're running?
etc.
mario;>
- - - - - - House Of Sites - - - - - - - + - - - Do you schmu
What version and what does the log say?
Gene
-Original Message-
From: meimi [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 01, 2004 11:11 PM
To: [EMAIL PROTECTED]
Subject: Server down regularly
Hello,
My server is down regularly. Could anyone tell what thing I should
check?
Thanks
Me
On 4/2/2004 6:29 AM Stephen Hilton wrote:
On Thu, 01 Apr 2004 15:12:35 -0800
Drew Tomlinson <[EMAIL PROTECTED]> wrote:
I'm using 4.9-RELEASE-p4 and have an 80 GB IDE hard drive in a firewire
enclosure. When I reboot my system, the drive is not recognized.
However if I unplug/plug the firewi
Jonathon McKitrick <[EMAIL PROTECTED]> writes:
> This might be a silly question, but is it possible that a problem with my
> local hostname could cause the key to somehow fail validation?
I don't think so.
I think I have managed to reproduce the problem, but I don't really
have a clear idea of wh
On Fri, Apr 2, 2004, meimi clacked the keyboard to produce:
> Hello,
> My server is down regularly. Could anyone tell what thing I should check?
> Thanks
> Meimi
We could use a little more information. Not to be rude, but are you
using FreeBSD as an OS? If so, what version? Describe the hardwar
> I'm hoping someone can help me, I've just upgraded a server to
> mod_php4-4.3.5_7,1, running with abcache-0.14 and over
> apache+mod_ssl-1.3.29+2.8.16_1.
>
> The problem is that it crashes with signal 11, I found this on the server's
> dmesg output:
> pid 1263 (httpd), uid 80: exited on signal 11
In the last episode (Apr 01), Irwan Hadi said:
> When I tested this web server on my FreeBSD 5.2.1 box, on a P IV 3
> Ghz Processor and 1 GB memory, I'm getting an enormous number of
> context switches, as you can see below:
>
> # vmstat 1
> procs memory pagedisks
On Fri, Mar 26, 2004 at 09:46:44AM +0100, Dag-Erling Smørgrav wrote:
: Jonathon McKitrick <[EMAIL PROTECTED]> writes:
: > Interestingly, my laptop (running 4.8R) is working now. No password needed
: > for any rsh operation to this site. But the same procedure on a 4.8-stable
: > box (this one, no
I have experienced same thing. It's now 10:30 April 2 and finally
there is some traffic.
Maybe the mailman list server was down or hung-up.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Drew
Tomlinson
Sent: Thursday, April 01, 2004 8:40 PM
To: FreeBSD Quest
Hello,
I need to use vmware under FreeBSD. Since vmware4 isn't ported yet (although
I own I license for that version...), I need to use vmware3. I can't buy any
license for that version, so I have to use evaluation licenses. The problem
is that I don't think it's possible anymore to request suc
On Thursday 01 April 2004 07:05 am, Jesse Sheidlower wrote:
> I'm sure this is a silly question, but. I know about use.perl and
> so forth for the 4.x series.
>
> Yesterday I installed FreeBSD 5.2.1, and the active Perl port
> is /usr/ports/lang/perl, which is v. 5.6.1. I'd like to upgrade
> to 5.8
On 4/2/2004 6:34 AM Andre Post wrote:
On Fri, 2004-04-02 at 01:12, Drew Tomlinson wrote:
I'm using 4.9-RELEASE-p4 and have an 80 GB IDE hard drive in a firewire
enclosure. When I reboot my system, the drive is not recognized.
However if I unplug/plug the firewire cable, then the drive is
r
I made make buildworld and make buildkernel make installkernel with no
errors but then I did make installworld it stopped after around 1 min with
error that file dos not exist. Now I manage to do a cvsup back to releng5_1
but I cannot do the buildworld kernel any suggestions to how to get it up
and
Either had I, buts its coming through now (although it seems some are dupes)
Nick Radonicich
[EMAIL PROTECTED]
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:owner-freebsd-
> [EMAIL PROTECTED] On Behalf Of Mark
> Sent: Thursday, April 01, 2004 3:55 PM
> To: [EMAIL PROTECTED]
> Subj
[EMAIL PROTECTED] wrote:
I'm trying to install FreeBSD on a Sun Ultra 5, but I'm pretty new at this
stuff. I've managed to get the fbsd_bootonly CD to be the startup CD, and
it gives me 5 display options, like VT100, xterm emulator, FreeBSD
console, etc. However, every single one of these results i
On Thursday 01 April 2004 12:58 pm, Robert Golovniov wrote:
> Hello freebsd-questions,
>
> I am trying to install 5.2 on an older Deskpro 575 machine. I've
> changed the BIOS configuration so that it allows me to use a 80GB
> disk. Fine. Installation complains a bit about the w
Hello,
we've a FreeBSD 5.1 box at a hosting company. As we need a lot more
maxsockets and resources, I added the following lines to /boot/loader.conf:
kern.ipc.maxsockets="64"
kern.maxusers="4096"
kern.ipc.nmbclusters="12"
Some would say, these are somewhat crazy values for this options,
On Fri, Apr 02, 2004 at 04:06:41PM +0200, Nico Erfurth wrote:
> Ceri Davies wrote:
>
> >>I am trying to install the latest exim, but I can't find
> >>exiscan-acl-4.31-16.patch.bz2 on any of the mirrors, anyone know where I
> >>can download it from?
> >
> >http://submonkey.net/files/ for a limited
Ceri Davies wrote:
I am trying to install the latest exim, but I can't find
exiscan-acl-4.31-16.patch.bz2 on any of the mirrors, anyone know where I
can download it from?
http://submonkey.net/files/ for a limited time (a week or so).
Why not from http://duncanthrax.net/exiscan-acl/?
Nico
On Thu, Apr 01, 2004 at 05:40:37PM -0500, [EMAIL PROTECTED] wrote:
> I'm trying to install FreeBSD on a Sun Ultra 5, but I'm pretty new at this
> stuff. I've managed to get the fbsd_bootonly CD to be the startup CD, and
> it gives me 5 display options, like VT100, xterm emulator, FreeBSD
> console,
On Thu, Apr 01, 2004 at 12:44:42PM -0800, paul beard wrote:
> In the course of cleaning up this b*rked port installed, I found that
> popt wouldn't install properly. It would report no errors but ports
> that depended on it would bail out, unable to find shlibs.
Yes, that's the same problem we'v
I have FreeBSD 5.2.1-RELEASE-p3 installed on my system. For testing
purposes, I have been temporarily suspending my ipfw firewall, then
reenabling it when I take a break from testing. I have enabled ftp (IPV4
only) in inetd.conf.
FTP connections and authentication from the localhost to itself al
On Thu, Apr 01, 2004 at 09:38:57PM +0200, Wayne Swart wrote:
> Helo guys
>
> I am trying to install the latest exim, but I can't find
> exiscan-acl-4.31-16.patch.bz2 on any of the mirrors, anyone know where I
> can download it from?
http://submonkey.net/files/ for a limited time (a week or so).
On Thu, Apr 01, 2004 at 09:17:42AM -0500, Jonathan Arnold wrote:
> Igor Skalski wrote:
> >I would like to try to install FreeBSD on my home computer wchich is not
> >connected to the Internet. In my opinion the most important aspect of
> >using free software in such a conditions is possessing whole
installing ImageMagick
cd to /usr/ports/graphics/ImageMagick
ran make
ran make install and get this ...
/usr/ports/graphics/ImageMagick# make install
===> Patching for ImageMagick-5.5.7.16
===> Applying FreeBSD patches for ImageMagick-5.5.7.16
Ignoring previously applied (or reversed) patch.
On Thu, 2004-04-01 at 17:05, Jesse Sheidlower wrote:
> I'm sure this is a silly question, but. I know about use.perl and
> so forth for the 4.x series.
>
> Yesterday I installed FreeBSD 5.2.1, and the active Perl port
> is /usr/ports/lang/perl, which is v. 5.6.1. I'd like to upgrade
> to 5.8.2, wh
Hello!
I am trying to run 5.2-CURRENT (cvsupped and rebuild apr 1) on the following
server:
Supermicro DPE-G2 motherboard
DUAL XEON 2.66Ghz (HT enabled)
2GB RAM
4 SATA SEAGTE 120GB DRIVES
3WARE 8506-4LP SATA RAID5 CONTROLLER
SATA drivers are joint into a single RAID5 array which is seens
as twe0
On Thu, Apr 01, 2004 at 10:05:35AM -0500, Jesse Sheidlower wrote:
> Yesterday I installed FreeBSD 5.2.1, and the active Perl port
> is /usr/ports/lang/perl, which is v. 5.6.1. I'd like to upgrade
> to 5.8.2, which is in /usr/ports/lang/perl5.8 and thus I can't
> just do "portupgrade perl".
You ca
In doing a make buildworld from 5.1 RELEASE to RELENG_5_2 it crapped out
with this:
===> lib/libpam/modules/pam_echo
cc -O2 -pipe -ffast-math -march=pentiumpro
-I/usr/src/lib/libpam/modules/pam_echo/../../../../contrib/openpam/include
-I/usr/src/lib/libpam/modules/pam_echo/../../libpam -Wsystem-he
How can i route packets from Internet to my private network without exposed Internet
address?
Inet
|
NAT - ISP - 192.168/16 with Gateway 192.168.0.1
|
My FreeBSD Router on ISP Net 192.168.6.18
My FreeBSD Router on Private Net - 10.0.0.1
|
My private network - 10.0.0/24
Pls reply to me pr
Hi :)
I'm having a problem with mplayer when compiled with RTC.
When I want to view a video, it just hangs mplayer for ever until I "CTRL-C"
which gives me:
MPlayer interrupted by signal 2 in module: sleep_rtc
I try launching mplayer as root --> same problem; I chmod /dev/rtc to 777 -->
same pro
I've purchased a new emac with OSX 10.3.
It's soon to arrive and so I'm thinking about a good way of interacting
the emac - which will be my main desktop - with my 5.2.1 server.
Until now I used a windows laptop with xp and the files where shared
with samba.
So I thought that using an unixoid os
Hello,
My server is down regularly. Could anyone tell what thing I should check?
Thanks
Meimi
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I've a couple of systems running FreeBSD 4.9; they all share /usr and
anything below by nfs. There are (at less) two applications that do not
run or do not run correctly on one distinguished system, but correctly on
each other machine.
One application is mozilla; it stops shortly after invocation
1 - 100 of 165 matches
Mail list logo
