Thanks for all answers. That space problem was bothering me all the times
and I have learnt the reason for space loss. By the way I admit that I have
to make more search on google before sending that to here.
But it can be very nice that this information to be added on handbook. Or is
it in ha
On Fri, Nov 21, 2003, Lefteris Tsintjelis wrote:
>Hi,
>
>Would anyone know how can I set or change a password from STDIN? Neither
>passwd or pw seem to accept STDIN.
The ``expect'' program is designed to handle this problem.
Bill
--
INTERNET: [EMAIL PROTECTED] Bill Campbell; Celestial Software
On Thu, 20 Nov 2003 20:42:33 -0500
Marty Landman <[EMAIL PROTECTED]> granted us these pearls of wisdom:
> At 08:17 PM 11/20/2003, paul van den bergen wrote:
>
> >to expand on this, there is a potential many to many relationship here
> >between
> >host names and IP addresses (strickly speaking th
Jason...
Thanks for the tip. I ran memtest86 all day today (about 4/5 cycles)
and it didn't come up with any errors.
I'm going to try the installer on another motherboard to see if it's
some odd motherboard/processor combo.
Thanks again.
Todd
On Nov 20, 2003, at 8:35 AM, Jason Stewart wrote
Are the binary ports obtained via pkg_add -r for 5.1 ever updated on the sever or is
the contents static?
Thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PRO
Hi,
Would anyone know how can I set or change a password from STDIN? Neither
passwd or pw seem to accept STDIN.
Thank you,
Lefteris Tsintjelis
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
Hi,
I just bought a Radeon 9000 and it works fine under X except when
rendering through Xvideo. In this case the output is covered in small
green or red squares. The mouse cursor also carries a square of black
stripes, unless I use SWcursor. I can't work out whether this is a
problem with the X
After spending all afternoon struggling with google, usbdevs, usbd, and a
palm zire I've got to ask: Has anyone got a palm syncing over USB?
I was ready to buy a new palm that synced over a serial port, but it
doesn't appear they make them.
Google led me to lots of people having problems, and som
On Fri, 21 Nov 2003 08:49:49 +0800, <[EMAIL PROTECTED]> wrote:
Thanks for all the replies. And yes, that's what my FAT32 is for... sort
of
a mediator for the different OSes which also contains important files
but no
directories for working applications.
Ok, let me get this in short. You basic
On Nov 20, 2003, at 5:06 PM, Rahul Fernandez wrote:
Hi, I'm am running 4.9 release. A package called hpijs1.4.1 is
installed. I now would like to upgrade to hpijs-1.5. However, this
package is only available in 4.9-stable. Can I install the package
from 4.9-stable or is it advisable to stick to th
On Thursday 20 November 2003 04:49 pm, [EMAIL PROTECTED] wrote:
> Thanks for all the replies. And yes, that's what my FAT32 is for... sort of
> a mediator for the different OSes which also contains important files but
> no directories for working applications.
>
> Ok, let me get this in short. You
At 08:17 PM 11/20/2003, paul van den bergen wrote:
to expand on this, there is a potential many to many relationship here
between
host names and IP addresses (strickly speaking that is what dns etc sees?)
how dose BSD define this? how does one define this using BSD?
Hey, sounds like you understa
On Thursday 20 November 2003 05:06 pm, Rahul Fernandez wrote:
> Hi, I'm am running 4.9 release. A package called hpijs1.4.1 is
> installed. I now would like to upgrade to hpijs-1.5. However, this
> package is only available in 4.9-stable. Can I install the package
> from 4.9-stable or is it advisab
hey all,
I first encountered networking in CISCO land... where IP addresses and host
names seem to be associated...
what is the freeBSD way? AFAICS, a machine has a defined name regardless of
howmany interfaces it has. if one splits the world up into hosts (one
interface) and routers (multipl
Hi, I'm am running 4.9 release. A package called hpijs1.4.1 is
installed. I now would like to upgrade to hpijs-1.5. However, this
package is only available in 4.9-stable. Can I install the package
from 4.9-stable or is it advisable to stick to the packages in my
release? Thanks, Rahul
Is there a command to list all windows shared resources. I want to have
a list of nodes to come up to make it easy to choose with to mount.
Thanks,
Jason
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Thanks for all the replies. And yes, that's what my FAT32 is for... sort of
a mediator for the different OSes which also contains important files but no
directories for working applications.
Ok, let me get this in short. You basically recommend me to follow this
http://www.freebsd.org/doc/en_US.IS
email 1
On Fri, 21 Nov 2003 05:22 am, Francisco Reyes wrote:
> On Thu, 20 Nov 2003, paul van den bergen wrote:
> > You can also get CF and similar solid stat memory chips to IDE connection
> > adaptors for around AU$30...
>
> URL?
> Sounds like an interesting option for a Firewall I need to do myse
Alex de Kruijff wrote:
On Wed, Nov 19, 2003 at 09:38:34PM -0800, Chip wrote:
I noticed my firewall rules are not being read. I have rc.conf set to
read the file rc.firewall. In rc.firewall the first line is add divert
natd etc etc. that is followed by pass all from any to any etc etc. Then
n
Hi, I'm am running 4.9 release. A package called hpijs1.4.1 is
installed. I now would like to upgrade to hpijs-1.5. However, this
package is only available in 4.9-stable. Can I install the package
from 4.9-stable or is it advisable to stick to the packages in my
release?
Thanks,
Rahul
___
On Thu, 2003-11-20 at 14:56, Derrick Ryalls wrote:
> When manufacturers talk about drive size, they use base 10. When computer
> report drive size, they use base 2. So, if you divide 200,000,000 bytes by
> ( 1024 * 1024 ), you get roughly 190gig in binary, so off the bat you lose
> 10gigs of spac
[EMAIL PROTECTED] wrote:
> Hello,
>
> I read somewhere before that there were partition or boot problems after
> installing 5.1 beside winXP. Has anyone been able to do this successfully?
> Is there something not obvious that I need to set/tweak while during
> sysinstall? This partition has seen
> It's spam, ignore it.
>
Well after I do this I can ignore it :)
Edit mailer /etc/postfix/access file
*.TemplateMonster.com REJECT
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscri
On Thu, Nov 20, 2003 at 11:15:30AM -0600, Chris Meyers wrote:
> So I'm trying to burn daily data backups to a dvd+rw in FreeBSD 5.1 and
> I'm having no end of problems. The dvd drive is a Memorex IDE internal
> which is brand new. I've googled until my fingers were cramped and
> everyone seems to s
Hello!
Do you know what's the reason of it? My machine is rebooting few times a day.
If answer is YES, what should I do?
savecore: reboot after panic: page fault
<118>savecore: reboot after panic: sbflush: cc 0 || mb 0xc1818500 || mbcnt 2304
<118>Nov 20 17:21:10 gateway savecore: reboot after p
> I want to know what the FBSD operating
> system does with it.
FBSD uses the name for network related functions, such as using it in mail
related functions when communicating with foreign mail servers, offering
the name to services your computer offers, and listening on certain
network sockets fo
On Nov 20, 2003, at 5:34 PM, fbsd_user wrote:
Thanks for your reply, but you missed the meaning of my question. I
am not interested in how hostname is used on the public internet and
DNS stuff, I know that stuff. I want to know what the FBSD operating
system does with it.
Nothing, particularly.
Th
In the last episode (Nov 20), [EMAIL PROTECTED] said:
> Has anybody out there had success in getting Ethereal-0.9.16
> up&running?
>
> The ports collection for 4.9 still lists 0.9.14. Any clean way to
> upgrade this to 0.9.16?
Try just editing the version number in the Makefile, run "make
makesum
Thanks for your reply, but you missed the meaning of my question. I
am not interested in how hostname is used on the public internet and
DNS stuff, I know that stuff. I want to know what the FBSD operating
system does with it. More explicatively during the install of FBSD
when asked to fill in th
On Thursday 20 November 2003 05:14 am, [EMAIL PROTECTED] wrote:
> As far as I am concerned, I tend to have 1 partition for the system and a
> separate one for user data - this way, you don't wipe everything out if
> your system crashes. This saved my life a couple of times.
>
> What do you need the
On Nov 20, 2003, at 3:52 PM, Chris Meyers wrote:
On Thu, 2003-11-20 at 14:35, Charles Swiger wrote:
Double-check what's going on with your devices, what does "camcontrol
devlist" give you? Maybe try using "/dev/cd0c" rather than
"/dev/acd0c"?
Here's what camcontrol had to say:
# camcontrol devlist
>
> Omer, this is because a percentage of your disk space is reserved
> automatically by FreeBSD. I believe that it automatically reserves 8% of
> your disk space. You can adjust this by using 'tunefs'. Try 'man tunefs' to
> find out how to use tunefs.
Partly true for the second part of the quest
On Thu, Nov 20, 2003 at 02:52:22PM -0600, Chris Meyers wrote:
> On Thu, 2003-11-20 at 14:35, Charles Swiger wrote:
> > On Nov 20, 2003, at 3:18 PM, Chris Meyers wrote:
> > > I did check out the docs at
> > > /usr/local/share/doc/dvd+rw-tools/index.html
> > > and they pretty much re-enforce what yo
> I have installed a new hard drive to my FreeBSD system. Hard
> drive is 200gb
> but
> when I fdisk and disklabel the output of "df -h" is something
> like that:
>
> /dev/ad1s1e 183G 2.0K 169G 0%/disk2
>
> Here as you can see I can only use 169GB of it. Bios has seen
> my har
Greetings,
I compiled a kernel from a standard 5.1-RELEASE installation yestreen to
include support for ext2fs, but couldn't find any documentation about what
option to set to include support for ext2fs. Grepping the handbook and all
files in the .../i386/conf directory did not reveal any referen
On Thu, 2003-11-20 at 14:35, Charles Swiger wrote:
> On Nov 20, 2003, at 3:18 PM, Chris Meyers wrote:
> > I did check out the docs at
> > /usr/local/share/doc/dvd+rw-tools/index.html
> > and they pretty much re-enforce what you said.
> >
> > Any other ideas??
>
> Double-check what's going on with
Omer Faruk Sen wrote:
Hi
I have installed a new hard drive to my FreeBSD system. Hard drive is
200gb but
when I fdisk and disklabel the output of "df -h" is something like that:
/dev/ad1s1e 183G 2.0K 169G 0%/disk2
Here as you can see I can only use 169GB of it. Bios has seen my
har
Omer, this is because a percentage of your disk space is reserved
automatically by FreeBSD. I believe that it automatically reserves 8% of
your disk space. You can adjust this by using 'tunefs'. Try 'man tunefs' to
find out how to use tunefs.
David van Geyn
- Original Message -
From: "Ome
Hello ...
The other day I rebooted my FreeBSD machine. Ever since then, messages to
hotmail.com and yahoogroups.com are not going through - the mail logs
report that there is a 'host name lookup failure' to the specific MX
hosts (eg 'mx1.hotmail.com'). The thing is though, I can run dig/nslookup
On Nov 20, 2003, at 3:18 PM, Chris Meyers wrote:
I did check out the docs at
/usr/local/share/doc/dvd+rw-tools/index.html
and they pretty much re-enforce what you said.
Any other ideas??
Double-check what's going on with your devices, what does "camcontrol
devlist" give you? Maybe try using "/d
Hi , Everybody
I'm looking for How can I create boot disk in FreeBSD . I'm not
talking about installation FreeBSD ... I mean When some problems occur I
want to boot FreeBSD from floppy disk ... like Linux mkbootdisk ...
At this moment I checked kernel file it's too big ( GENERIC
On Thu, 2003-11-20 at 13:40, Charles Swiger wrote:
> Hi, Chris--
>
> On Nov 20, 2003, at 12:15 PM, Chris Meyers wrote:
> > I am at a loss. Does anybody have any suggestions about what I need to
> > do to make this work? Is there some other way to burn dvds? Do I need
> > to
> > do some kernel rec
Hi
I have installed a new hard drive to my FreeBSD system. Hard drive is 200gb
but
when I fdisk and disklabel the output of "df -h" is something like that:
/dev/ad1s1e 183G 2.0K 169G 0%/disk2
Here as you can see I can only use 169GB of it. Bios has seen my harddrive
as 190GB a
On Thursday 20 November 2003 01:56 pm, Barry Skidmore wrote:
> I have both Gnome and KDE installed on my 4.9-RELEASE system, and would
> like to be able to choose between them at X startup.
>
> I found a port called 'wmanager' that sounds like it will do what I
> need. However, there is no man pag
Howdy list,
How does dmesg.today get rotated to dmesg.yesterday?
I suspect my dmesg.today of being corrupted by old info.
I have gotten the following message in my security output
for the last four days:
pid 4062 (clamd), uid 3848: exited on signal 11
It appears in different places, but what ar
Quid pro quo:
I'm not an expert, and don't play one on TV.
fbsd_user wrote:
During the install you are asked for the host name which adds the
following line to rc.conf.
hostname="gateway.homepc.com"
What does FBSD use this for?
DNS? Same stuff as any other system, with the
possible exception
I have both Gnome and KDE installed on my 4.9-RELEASE system, and would
like to be able to choose between them at X startup.
I found a port called 'wmanager' that sounds like it will do what I
need. However, there is no man page or other documentation available on
the web, so I have not been able
On 20/11/03 18:32 +, Chris Howells wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hi,
>
> On Thursday 20 November 2003 18:25, Jerry McAllister wrote:
> > Don't know anything about this shop, but I don't see the need either.
>
> It's spam, ignore it.
>
Yup, the first thing I no
Hi, Chris--
On Nov 20, 2003, at 12:15 PM, Chris Meyers wrote:
I am at a loss. Does anybody have any suggestions about what I need to
do to make this work? Is there some other way to burn dvds? Do I need
to
do some kernel recompilation? I have installed dvd+rw-tools but haven't
found any good docs
Hi all,
I have a server that I am restoring and it seems to be going really
slow. Backup performance...I was able to backup the server in under 15
minutesthe restore has been going for over an hour nowand it isn't
even halfway done.
Basically what I am doingInstalled F
Hello peoples,
Question: Should I be able to open /dev/ugen0 more than once?
I am using FreeBSD 4.9-Stable, libusb-0.1.7.
>From reading the libusb docs, you must open the device for each
interface you want to acquire. However, once it is opened once, it can't
be opened again.
Furthermore, calls
Hi,
I get a lot of entries like those below on a 5.1R-p10 machine with a
fat32 mounted. I rember seeing something like this a log time ago
2.something but I haven't seen them since. Any hints ?
Nov 20 19:06:59 it kernel: deget(): . entry at clust 1365522 != 1869768035
Nov 20 19:06:59 it kernel:
Hi,
I installed a new FreeBSD 4.9 box and is running as a Firewall/NAT device
for a small network.
I am getting this error twice per day :
"/kernel: arplookup 100.93.140.1 failed: host is not on local network"
Everything works ok without any problems for all our workstations behind
this Firewall/NA
On Thu, Nov 20, 2003 at 01:34:10PM -0500, Yann-Ga?l Gu?h?neuc wrote:
[...]
> So, I would like to know more about the processus to contribute to
> FreeBSD code? Let assume I downloaded source from CVS, and I wrote a
> patch for some part of the system, how do I submit my patch, to whom
> s
> During the install you are asked for the host name which adds the
> following line to rc.conf.
> hostname="gateway.homepc.com"
This is a Fully Qualified Domain Name (FQDN) of the computer following the
standards of the DNS system.
> What does FBSD use this for?
Locating your computer by it's n
The C137 (in my case, black with a 90W PSU). It wil accomodate a flex ATX
board, as well as the smaller Mini ITX board. If you order the dual riser
card, they will throw in an extra extender with it (since they assume you
will be running an ITX board in it)
Case Outlet doesn't appear to carry t
On Wed, Nov 19, 2003 at 06:08:55PM -0700, mike bueide wrote:
> On Wed, Nov 19, 2003 at 03:26:02PM -0600, Peter Elsner wrote:
> > Thanks, that's my next attempt. I don't have NAT running right now,
> > but didn't think it was required unless I have the firewall enabled.
> > I usually enable that af
Hello,
First, I apologize if my question is directed to the inappropriate
mailing list or has already been answered (in this case, could someone
redirect me with the answer).
I am giving a lecture about software project management and I thought
it would be interesting for my student to know
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
On Thursday 20 November 2003 18:25, Jerry McAllister wrote:
> Don't know anything about this shop, but I don't see the need either.
It's spam, ignore it.
- --
Cheers, Chris Howells -- [EMAIL PROTECTED], [EMAIL PROTECTED]
Web: http://chrishowell
On Thu, 20 Nov 2003, paul van den bergen wrote:
> I have a bunch of these (8000s actually) for a testbed network. work like a
> treat... go fanless if you can...
Where did you get them from?
How much?
> I did have some hassles with the onboard via network connection not coping
> with long vlan
>
> Dear FreeBSD Team,
>
> I represent Artvertex, Inc.
>
> We are well known in the web design industry.
>
> We direct and manage several successful Internet web design projects
> including:
> http://www.TemplateMonster.com
> http://www.Site2You.com
> http://www.TemplateTuning.com and several
On Thu, 20 Nov 2003, J. Seth Henry wrote:
> Guys,
> Case Outlet*, and perhaps others by now, have the Travla Flex ATX / mini ITX
> case that will accomodate two PCI cards. I have an 933MHz EPIA board with two
> 3c905TX-C NICs, and have seen a substantial improvement in performance over
> my old Ne
On Thu, 20 Nov 2003, paul van den bergen wrote:
> You can also get CF and similar solid stat memory chips to IDE connection
> adaptors for around AU$30...
URL?
Sounds like an interesting option for a Firewall I need to do myself very
soon.
___
[EMAIL PR
So I'm trying to burn daily data backups to a dvd+rw in FreeBSD 5.1 and
I'm having no end of problems. The dvd drive is a Memorex IDE internal
which is brand new. I've googled until my fingers were cramped and
everyone seems to say "Here's a bunch of extra stuff you have to do for
4.x . For 5.x you
Hi,
I need a way to store different directory trees and files with different
encryption keys, i.e..
/data/mars /data/mars/one /data/mars/two etc all are encrypted with one
key and
/data/venus /data/venus/one /data/venus/two etc, would have a different
key.
Ideally, the directory structur
On Thu, 20 Nov 2003 23:33:39 +0600 Sergey Sysoev <[EMAIL PROTECTED]> wrote:
> Hello Anthony,
>
> AC> Been getting "Connection refused" for the last couple of days when
> AC> trying to use anoncvs. Anyone know why?
>
> I don't know why but you may use any mirror, for example
> anoncvs
On Wed, 19 Nov 2003 22:58:43 +0200
"EF EMBEEN - The Business Network" <[EMAIL PROTECTED]> wrote:
> To whom it may concern,
>
> We own a FreeBSD (version 4.4, Apache) dedicated server with 40GB capacity. We
> want to know which is the appropriate software for media server for it. We'd
> like to st
Hello Anthony,
AC> Been getting "Connection refused" for the last couple of days when
AC> trying to use anoncvs. Anyone know why?
I don't know why but you may use any mirror, for example
anoncvs.de.freebsd.org if it is acceptable to you. You may change Root
files using following sc
During the install you are asked for the host name which adds the
following line to rc.conf.
hostname="gateway.homepc.com"
What does FBSD use this for?
Did I use the correct format for the host name?
What are the rules for creating the hostname name?
Are the rules published anywhere?
_
On Wed, 19 Nov 2003 23:33:08 -0800 (PST)
Mark Terribile <[EMAIL PROTECTED]> wrote:
>
> [This reply is tardy, I know; please accept my apologies]
>
> >>> Next is ... a mother board. I am wanting a ASUS just because I hear
> >>> alot of people talking about it on the forums, ...
> >> ...
> >> Take
On Thu, Nov 20, 2003, Terry Lambert wrote:
>Gregory Sutter wrote:
>> Content-Type: text/plain; charset=iso-8859-1
>> Content-Disposition: inline
>>
>> These headers show that the part is not an attachment but should be
>> displayed inline, and that it contains pure text that doesn't need a
>>
EF EMBEEN - The Business Network wrote:
To whom it may concern,
We own a FreeBSD (version 4.4, Apache) dedicated server with 40GB capacity. We want to know which is the appropriate software for media server for it. We'd like to streaming audio & video so we need a media server for FreeBSD platfor
I had the same problem before on a 5.1 version and wiped of the src tree and downloded
the sources from scratch. Made the kernel compiling according to the instructions
regarding the "new way" ( see the handbook ) and it worked out perfectly.
Ps check as well if you are using a rw cdrom and esp
Been getting "Connection refused" for the last couple of days when
trying to use anoncvs. Anyone know why?
--
Anthony Chavez http://www.anthonychavez.org/
mailto:[EMAIL PROTECTED]jabber:[EMAIL PROTECTED]
pgp0.pgp
Description: PGP signature
On Nov 20, 2003, at 1:26 AM, Frederick Bowes wrote:
At work there are some unused ip addresses but we dont know which ones
they are (because there are alot of computers) is there a port which
could
be used to ping the subnet over a few days to work out which ip
addresses
are actually coming onlin
Hi,
Has anybody out there had success in getting Ethereal-0.9.16 up&running?
The ports collection for 4.9 still lists 0.9.14. Any clean way to
upgrade this to 0.9.16?
TIA for your help,
-ewald
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org
Dear FreeBSD Team,
I represent Artvertex, Inc.
We are well known in the web design industry.
We direct and manage several successful Internet web design projects
including:
http://www.TemplateMonster.com
http://www.Site2You.com
http://www.TemplateTuning.com and several others.
Our company woul
>Here's the current setup that I have came up with. I think I would
>be pretty happy with it as long as I don't have any problems in
>FreeBSD. If I have problems I want them to beable to be fixed ya know?
Looks good to me, quick look in google didn't find any major problems.
S
_
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Here's the current setup that I have came up with. I think I would be pretty happy
with it as long as I don't have any problems in FreeBSD. If I have problems I want
them to beable to be fixed ya know?
Antec PLUSVIEW1000AMG Chassis
AMD Tyan S2466 (
Jesse Guardiani wrote:
> Howdy list,
>
> I'm running FreeBSD 5.1-RELEASE. I just bought a generic
> USB 1.1/2.0/firewire external drive enclosure for my 32gb
> Travelstar 12.5mm hard drive.
>
> The device shows up like this:
>
> Nov 18 14:06:16 trevarthan kernel: umass0: Acer Labs USB 2.0 Stora
On Thu, 2003-11-20 at 07:25, Roman Neuhauser wrote:
> which of my servers is primary and which secondary if I can edit the
> data on either and have it synchronized to the other?
The one you list as primary in the Start Of Authority :P
Frank
signature.asc
Description: This is a digital
Guys,
Case Outlet*, and perhaps others by now, have the Travla Flex ATX / mini ITX
case that will accomodate two PCI cards. I have an 933MHz EPIA board with two
3c905TX-C NICs, and have seen a substantial improvement in performance over
my old Netgear router.
Trust me, the onboard NIC's are cr
As I understand it, proxy ARP answers ARP requests on behalf of the
connected parties - Thus ensuring the PPPoE box collates all traffic from
foreign hosts? I have already implemented proxyarp option in ppp, assuming
that it would be necessary for all traffic to be directed to the PPPoE
server, whe
Hello!
I'm running FreeBSD 4.8 on a PC with ASUS P4B533-E motherboard, which
includes the NEC PD72874GC FireWire controller. As I'm looking for a
not-too-expensive backup solution for this machine, I was thinking of
external HDD. Since FreeBSD 4.8 supports only USB 1.0, USB HDDs are too
slow f
Hi all
System: FreeBSD 5.1 Release
Arch: 386 laptop (Compaq Presario 1200)
WNIC: ZyAir B-100 (from Zyxel)
Once my friend had a ZyAir B-100 and I tested it on my FreeBSD laptop. I
was able to get a sniffer going and see some traffic. Now I have a ZyAir
B-100 myself and I'm trying to get it to
On Wed, Nov 19, 2003 at 09:38:34PM -0800, Chip wrote:
> I noticed my firewall rules are not being read. I have rc.conf set to
> read the file rc.firewall. In rc.firewall the first line is add divert
> natd etc etc. that is followed by pass all from any to any etc etc. Then
> nothing after that i
Keith Spencer <[EMAIL PROTECTED]> writes:
> I just spent many hours finding out my bakup strategy
> was useless (didn't know what I was doing I guess)
You don't really have a backup strategy unless you have tested
it. I just finished building myself a new backup system, and I
had to run it throu
On Thu, Nov 20, 2003 at 12:00:06PM +0100, Martin V??a typed:
> Hi,
> I would like to format my disk with 5.1 and install 4.9. I don't care about system
> wide settings, installed
> appz and so on. All I want is to save mail and X/fluxbox settings. Do you think that
> If I just copy home dir this
On Wed, Nov 19, 2003 at 09:38:34PM -0800, Chip typed:
> I noticed my firewall rules are not being read. I have rc.conf set to
> read the file rc.firewall. In rc.firewall the first line is add divert
> natd etc etc. that is followed by pass all from any to any etc etc. Then
> nothing after that i
Hi, all. FreeBSD 4.2. Can't delete rrdtool-1.0.45
after installation. Get: "pkg_delete: rrdtool-1.0.45
doesn't have a prefix". What should I do? That is a
question.
Thanks,
Olga
__
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
_
Hi :)
I get a lot of those warning messages in my logs.
Is there any way I could tell inetd / tcp wrappers to turn those off ?
inetd[93598]: warning: /etc/hosts.allow, line 23: can't verify hostname:
getaddrinfo(.imaginet.fr, AF_INET) failed
I know what it means, the only thing I don't
# [EMAIL PROTECTED] / 2003-11-14 16:43:54 -0600:
> On Fri, 2003-11-14 at 15:23, Darryl Hoar wrote:
> > What tools exist in Freebsd to determine the primary dsn server for
> > a domain
>
> Heh.. . everyone seems to be responding with 'nslookup -type=ns foo.com'
> or 'host -t ns foo.com', but those
Kris Kennaway wrote:
> On Wed, Nov 19, 2003 at 10:28:04PM -0600, Minnesota Slinky wrote:
>
> > I talked to a couple of people who do beta testing for Microsoft and
> > they said the issue came up a few years ago. According to them (one
> > being my father), it has to do with security and virus pr
Gregory Sutter wrote:
> Content-Type: text/plain; charset=iso-8859-1
> Content-Disposition: inline
>
> These headers show that the part is not an attachment but should be
> displayed inline, and that it contains pure text that doesn't need a
> special handler to be displayed. Why Outlook Expr
Can anyone tell me the application being used by Yahoo! to manager their
groups?
Campbell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
To whom it may concern,
We own a FreeBSD (version 4.4, Apache) dedicated server with 40GB capacity. We want to
know which is the appropriate software for media server for it. We'd like to streaming
audio & video so we need a media server for FreeBSD platform.
We looking forward to hearing to yo
As far as I am concerned, I tend to have 1 partition for the system and a
separate one for user data - this way, you don't wipe everything out if
your system crashes. This saved my life a couple of times.
What do you need the 10GB FAT32 partition for? (I suspect the same purpose
but with respect
"Kevin McKay" <[EMAIL PROTECTED]> writes:
You normally need to run the sysinstall from the version you're
updating to. You could configure your system's sysinstall to
load in the later version, and it should be compatible, but I
don't know the syntax for that offhand...
For reference,
On Thu, 20 Nov 2003 14:59:29 +0800, <[EMAIL PROTECTED]> wrote:
Hello,
I read somewhere before that there were partition or boot problems after
installing 5.1 beside winXP. Has anyone been able to do this
successfully? Is there something not obvious that I need to set/tweak
while during sysi
Hi,
I would like to format my disk with 5.1 and install 4.9. I don't care about system
wide settings, installed
appz and so on. All I want is to save mail and X/fluxbox settings. Do you think that
If I just copy home dir this will do?
thank you
Martin
1 - 100 of 110 matches
Mail list logo
