SNIP
> > Perhaps a bit off-topic, but I'm looking for a cheap vlan switch.
> > Anyone with a suggestion?
>
> the Netgear GS724T is a 'web smart' ( :D ) 24 port gigabit
> switch. about 600
> AUD from memory. you can find cheaper ones if you dont want gigE.
If your ok with 100/Full, I recomend the
I much of this is from http://www.irbs.net/FreeBSD/FAQ/networking.html .
> > I am wondering how to implement a freebsd router without NAT enbaled?
> > There are 3 subnets connected to this freebsd router. all of
> them need to
> > access the Internet.
Due to the lack of NAT, I assume that they al
p.
Intel 550T Layer 3 managed 10/100 switch: dirt cheap.
According to ebay, the 550 can be had for about $30.00 USD.
In my opinion, thats a killer deal for a 24 port managed
ethernet switch. If I didnt allready have too many switches,
I would buy s
SNIP
> In a FreeBSD router (5.4-stable), there are currently 50 IPSEC VPN
> connections running with 50 remote sites, now I need to add one more (new)
> vpn to it without resetting the existing VPN connection. Therefore I have
> created a script (new-vpn.sh):
>
> #!/bin/sh
>
> # Tunnel to kgportsmi
> > rl0: flags=8802 mtu 1500
> > inet 10.0.0.1 netmask 0xafc broadcast 255.255.255.3
> This netmask looks very odd...
Did you set the netmask to 0xafc? This netmask will not work
period. (supprised FreeBSD lets you set it this way)
Can you set the netmask to 255.255.255.0 (0xff0
email.
>
> Thanks,
And for the sake of everyone else, this question really should be directed
to -net. So I request that further discussion on the matter be moved
there. This list is for people that wish to discuss comments and report
bugs etc about freebsd-stable.
>
> Jake
Aaron Bu
Hello,
This problem likely requires a command that I am not aware of
but let me describe my problem.
I have a host with both Cable and DSL links. MPD works on either
link just fine. But mpd only listens to a connection on the first unused
link.
Is there a way to get mpd to listen
> -Original Message-
> From: Joost Bekkers [mailto:[EMAIL PROTECTED]
> Sent: Sunday, November 02, 2003 6:24 AM
> To: Aaron Burke
> Cc: [EMAIL PROTECTED]
> Subject: Re: how to run mpd for pptp on Cable and DSL links at the same
> time?
>
>
> On Sun, Nov 02, 2
> Subject: Re: Routing With Two ISPs?
>
>
> [ Charset windows-1252 unsupported, converting... ]
> > I have a 4.8 box serving as a gateway with two connections to the
> > Internet. Is there some way to set the box up so that packets are
> > routed out through the same interface from which they arri
> I have 3 Nics lets name them NIC1-NIC2-NIC3
> NIC1 --> Internal Network /24
> NIC2 --> OutSide World (A)
> NIC2 --> OutSide World (B)
I have a similar situation (I think). I also have two seperate
connections to the internet.
fxp0: 11.22.33.44 gateway 11.22.33.1
fxp1: 66.77.88.99 gateway 66.77.88
I am looking for a way of configuring the mpd.
The problem is that the sample configs of mpd dont seem to describe
this situation. Can anyone direct me to a site with a similar setup?
Am I mistaken about mpd?
Thanks for your time
Aaron Burke
11 matches
Mail list logo
