https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238198
--- Comment #4 from Kyle Evans ---
(In reply to Rodney W. Grimes from comment #3)
There seems to be something else going on here- ix0.221 should've showed the
inbound traffic (with or without my fixes) since that gets tapped in
ether_input
[I cast level 3 necromancy and revive this thread from the dead]
On Tue, Mar 19, 2019 at 4:02 AM Eric Bautsch wrote:
>
> Hi Patrick.
>
>
> I get that point, but then I have two options only: I somehow convince the
> BIOS
> to do a network boot over a VLAN for installation - not a capability this
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238198
Eugene Grosbein changed:
What|Removed |Added
CC||eu...@freebsd.org
--- Comment #5
> [I cast level 3 necromancy and revive this thread from the dead]
But this is all layer 2 stuff :-)
>
> On Tue, Mar 19, 2019 at 4:02 AM Eric Bautsch wrote:
> >
> > Hi Patrick.
> >
> >
> > I get that point, but then I have two options only: I somehow convince the
> > BIOS
> > to do a network b
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238198
--- Comment #6 from Rodney W. Grimes ---
(In reply to Eugene Grosbein from comment #5)
How does one specify the vlan 221 on bridgeX for that IP address, and what
happens when I have 4 vlans with different IP addresses, do I stick them all o
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238198
--- Comment #7 from dgilb...@eicat.ca ---
(In reply to Rodney W. Grimes from comment #6)
What you're saying is "what if I have 3 ethernet cards, with different
addresses all plugged into the same switch" ... in effect. I suppose there's
no
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238198
--- Comment #8 from dgilb...@eicat.ca ---
Hrm. This is a case with different ethernets being different. Host also has
an re0. In rc.conf, I s1,$/ix0/re0/ and rebooted. With re0, dhcpd (locally)
doesn't give an IP to the VM where it did o
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238198
--- Comment #9 from Eugene Grosbein ---
(In reply to Rodney W. Grimes from comment #6)
Our if_bridge does not support tagged frames currently, so you'd need
bridge-per-vlan, so each bridge deals with frames already stripped.
--
You are r
On Wed, May 29, 2019 at 9:13 AM Rodney W. Grimes
wrote:
>
> > [I cast level 3 necromancy and revive this thread from the dead]
>
> But this is all layer 2 stuff :-)
>
> >
> > On Tue, Mar 19, 2019 at 4:02 AM Eric Bautsch wrote:
> > >
> > > Hi Patrick.
> > >
> > >
> > > I get that point, but then I
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238198
--- Comment #10 from dgilb...@eicat.ca ---
(In reply to dgilbert from comment #8)
OK. My last comment sounded far-out on a limb, even to me. But I re-verified
it. with isc-dhcpd and dhcpd_ifaces = either "ix0.221" or "re0.221" ... and
ix
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238216
Mark Linimon changed:
What|Removed |Added
Summary|Miscommunication when |Miscommunication when
11 matches
Mail list logo