On Monday, February 07, 2011 07:10:01 Alexander Zagrebin wrote:
> Hi!
>
> On 06.02.2011 11:32:40 +0100, Bernhard Schmidt wrote:
> > > I had the doubts about ability to change or hide/unhide the SSID,
> > > but it works too. It seems that after `ifconfig wlan0 ssid ...`
> > > or `ifconfig wlan0 (hi
Hello!
On a multihomed FreeBSD 8.1-RELEASE, in a multihomed jail, source IP
selection suddenly refused to work.
ifconfig on a box:
bce0: flags=8943 metric
0 mtu 1500
options=c01bb
ether 00:1a:64:c5:d0:c8
inet 192.168.80.40 netmask 0xff00 broadcast 192.168.80.255
media:
Old Synopsis: ath(4) lot of bad series(0)
New Synopsis: [ath] ath(4) lot of bad series(0)
Responsible-Changed-From-To: freebsd-bugs->freebsd-net
Responsible-Changed-By: linimon
Responsible-Changed-When: Mon Feb 7 09:00:56 UTC 2011
Responsible-Changed-Why:
Over to maintainer(s).
http://www.freebs
Hello, Eugene.
You wrote 7 февраля 2011 г., 10:14:22:
> Have you read thread "em driver, 82574L chip, and possibly ASPM" in net@ ?
Partially. Now I return to it and found some patch to if_em.c, I'll
give it a try.
--
// Black Lion AKA Lev Serebryakov
___
On 05.02.2011 19:48, Eugene Grosbein wrote:
> Same box, more panics with KDB_TRACE, NETGRAPGH_DEBUG and your patch and
> Julian's.
I've built new SuperMicro server (same hardware platform with ECC memory, same
NanoBSD image
and configuration but no lagg interfaces and only one uplink em0 and an
Note: to view an individual PR, use:
http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).
The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.
S Tracker
On 02.02.2011 00:50, Gleb Smirnoff wrote:
> On Wed, Feb 02, 2011 at 12:30:20AM +0600, Eugene Grosbein wrote:
> E> On 31.01.2011 14:20, Julian Elischer wrote:
> E>
> E> > replace with:
> E> >
> E> > 3504if ((hook == NULL) ||
> E> > 3505NG_HOOK_NOT_VALID(hook) ||
> E> >
On 2/6/2011 4:40 PM, Lev Serebryakov wrote:
> Hello, Freebsd-stable.
> It hangs under load without any output. When it works with POLLING, it
> prints "Watchdog timeout" and reset automatically several times a day,
> but without POLLING it simply hangs with same frequency. It is
> 8.2-PRERELEASE
Hello, Mike.
You wrote 7 февраля 2011 г., 15:22:11:
>> It hangs under load without any output. When it works with POLLING, it
>> prints "Watchdog timeout" and reset automatically several times a day,
>> but without POLLING it simply hangs with same frequency. It is
>> 8.2-PRERELEASE (from RELENG
>
> /boot/loader.conf:
> hw.em.rxd=4096
> hw.em.txd=4096
> net.link.ifqmaxlen=16384
>
> /etc/sysctl.conf:
> dev.em.0.rx_int_delay=200
> dev.em.0.tx_int_delay=200
> dev.em.0.rx_abs_int_delay=4000
> dev.em.0.tx_abs_int_delay=4000
> dev.em.0.rx_processing_limit=4096
>
>
>I'm trying to run with
Synopsis: [ixgbe] Intel 10GBase-LR Ethernet card detected as 10GBase-SR
State-Changed-From-To: open->closed
State-Changed-By: jhb
State-Changed-When: Mon Feb 7 15:13:30 UTC 2011
State-Changed-Why:
Submitter reports issue resolved.
http://www.freebsd.org/cgi/query-pr.cgi?pr=153951
___
06.02.2011 4:42, Julian Elischer wrote:
On 2/5/11 4:09 PM, Ivo Vachkov wrote:
Hello,
How can I help?
if you have ipv6 connectivity and experience, I have no experience or
connectivity, with it so
I'll be coding blind and will need a tester.
If you have an application for IPV6 testing that wou
Hi List,
The issue is with the igb driver from 7.4 RC3 r218406. If the driver runs
out of mbuf clusters it simply stops receiving even after the clusters have
been freed.
igb0@pci0:7:0:0:class=0x02 card=0x8086 chip=0x10a78086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
On Feb 5, 2011, at 8:42 PM, Julian Elischer wrote:
> if you have ipv6 connectivity and experience, I have no experience or
> connectivity, with it so
> I'll be coding blind and will need a tester.
> If you have an application for IPV6 testing that would be even better.
> Divert is often used for
Hello, Karim.
You wrote 7 февраля 2011 г., 19:58:04:
> The issue is with the igb driver from 7.4 RC3 r218406. If the driver runs
> out of mbuf clusters it simply stops receiving even after the clusters have
> been freed.
It looks like my problems with em0 (see thread "em0 hangs without
any mes
The following reply was made to PR kern/154557; it has been noted by GNATS.
From: "Vladislav V. Prodan"
To: bug-follo...@freebsd.org
Cc:
Subject: Re: kern/154557: [tcp] Freeze tcp-session of the clients, if in the
gateway is used quagga
Date: Mon, 07 Feb 2011 22:13:58 +0200
#cat /etc/rc.conf
apologies if this gets in twice.
-- Forwarded message --
From: Karim Fodil-Lemelin
Date: 2011/2/7
Subject: Re: igb driver tx hangs when out of mbuf clusters
To: Lev Serebryakov
Cc: freebsd-net@freebsd.org
2011/2/7 Lev Serebryakov
Hello, Karim.
> You wrote 7 февраля 2011 г., 1
Subject: Re: igb driver tx hangs when out of mbuf clusters
> To: Lev Serebryakov
> Cc: freebsd-net@freebsd.org
>
>
> 2011/2/7 Lev Serebryakov
>
> Hello, Karim.
>> You wrote 7 февраля 2011 г., 19:58:04:
>>
>>
>> > The issue is with the igb driver from 7.4 RC3 r218406. If the driver
>> runs
>> > o
On Mon, Feb 07, 2011 at 05:33:47PM -0500, Karim Fodil-Lemelin wrote:
> Subject: Re: igb driver tx hangs when out of mbuf clusters
>
> > To: Lev Serebryakov
> > Cc: freebsd-net@freebsd.org
> >
> >
> > 2011/2/7 Lev Serebryakov
> >
> > Hello, Karim.
> >> You wrote 7 февраля 2011 г., 19:58:04:
> >>
Hello
I've got a new Dell Precision workstation here with a BCM5761 on intel
mobo for westmere xeons that is wedging with interrupt storm and will
lockup the system randomly. I have turned HTT and auto powermanagement
off in bios (system cannot sleep), lowest cpu acpi state is C1.
Here is dmesg:
- Original Message
> From: Bernhard Schmidt
> To: PseudoCylon
> Cc: Alexander Zagrebin ; freebsd-net@freebsd.org
> Sent: Sun, February 6, 2011 3:42:43 AM
> Subject: Re: if_run in hostap mode: issue with stations in the power save mode
Afaik iwn(4) doesn't use PS, never got around im
On Mon, Feb 07, 2011 at 06:09:16PM -0600, Peter Lai wrote:
> Hello
>
> I've got a new Dell Precision workstation here with a BCM5761 on intel
> mobo for westmere xeons that is wedging with interrupt storm and will
> lockup the system randomly. I have turned HTT and auto powermanagement
> off in bi
2011/2/7 Pyun YongHyeon
> On Mon, Feb 07, 2011 at 05:33:47PM -0500, Karim Fodil-Lemelin wrote:
> > Subject: Re: igb driver tx hangs when out of mbuf clusters
> >
> > > To: Lev Serebryakov
> > > Cc: freebsd-net@freebsd.org
> > >
> > >
> > > 2011/2/7 Lev Serebryakov
> > >
> > > Hello, Karim.
> >
On Feb 7, 2011 7:38 PM, "Pyun YongHyeon" wrote:
>
> On Mon, Feb 07, 2011 at 06:09:16PM -0600, Peter Lai wrote:
> > Hello
> >
> > I've got a new Dell Precision workstation here with a BCM5761 on intel
> > mobo for westmere xeons that is wedging with interrupt storm and will
> > lockup the system ra
Peter Lai wrote:
> Hello
>
> I've got a new Dell Precision workstation here with a BCM5761 on intel
> mobo for westmere xeons that is wedging with interrupt storm and will
> lockup the system randomly. I have turned HTT and auto powermanagement
> off in bios (system cannot sleep), lowest cpu acpi
On Mon, Feb 07, 2011 at 09:21:45PM -0500, Karim Fodil-Lemelin wrote:
> 2011/2/7 Pyun YongHyeon
>
> > On Mon, Feb 07, 2011 at 05:33:47PM -0500, Karim Fodil-Lemelin wrote:
> > > Subject: Re: igb driver tx hangs when out of mbuf clusters
> > >
> > > > To: Lev Serebryakov
> > > > Cc: freebsd-net@fre
2011/2/7 Pyun YongHyeon
> On Mon, Feb 07, 2011 at 09:21:45PM -0500, Karim Fodil-Lemelin wrote:
> > 2011/2/7 Pyun YongHyeon
> >
> > > On Mon, Feb 07, 2011 at 05:33:47PM -0500, Karim Fodil-Lemelin wrote:
> > > > Subject: Re: igb driver tx hangs when out of mbuf clusters
> > > >
> > > > > To: Lev S
27 matches
Mail list logo
