On Wednesday, January 19, 2011 06:35:51 Alexander Zagrebin wrote:
> Hi!
>
> On 18.01.2011 12:31:20 +0100, Bernhard Schmidt wrote:
> > > I'm trying to use the RT2872-based USB adapter in the hostap mode
> > > on the latest RELENG_8 (8.2-PRERELEASE) for amd64.
> > > [..]
> >
> > Pull that
> > http:
> Message: 19
> Date: Tue, 18 Jan 2011 13:26:58 +0300
> From: Alexander Zagrebin
> Subject: if_run and wlan_amrr: kernel panics on 8.2-PRERELEASE amd64
> To: freebsd-net@freebsd.org
> Message-ID: <20110118102658.ga3...@gw.zagrebin.ru>
> Content-Type: text/plain; charset=us-ascii
> mostly wor
Hi!
On 19.01.2011 09:37:12 +0100, Bernhard Schmidt wrote:
> > Case 2: wlan_amrr.ko loaded manually _after_ if_run.ko but before
> > creation of the wlan interface
> >
> > stable/8: panic on rate control
> > rev217511: no panic, but rate control doesn't work; tx rate is
> > fixed on 1 Mbit/s
On Wednesday, January 19, 2011 12:23:30 Alexander Zagrebin wrote:
> Hi!
>
> On 19.01.2011 09:37:12 +0100, Bernhard Schmidt wrote:
> > > Case 2: wlan_amrr.ko loaded manually _after_ if_run.ko but before
> > > creation of the wlan interface
> > >
> > > stable/8: panic on rate control
> > > rev
Hi!
On 19.01.2011 01:23:18 -0800, PseudoCylon wrote:
> > mostly works (there is an issue with the devices with the 'power save mode'
> > enabled),
If device, connected to the freebsd based AP, is in 'power save mode',
then there are:
- very large dispersion of the ping time; like this
64 by
Hi,
I have this wifi card, and I have free time. I can help solve this
problem, but I am not developer or programmer. I can only "serve" as a
tester :)
kuba
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
On Wednesday 19 January 2011 12:40:15 Bernhard Schmidt wrote:
> On Wednesday, January 19, 2011 12:23:30 Alexander Zagrebin wrote:
> > Hi!
> >
> > On 19.01.2011 09:37:12 +0100, Bernhard Schmidt wrote:
> > > > Case 2: wlan_amrr.ko loaded manually _after_ if_run.ko but before
> > > > creation of the w
On Monday 17 January 2011 19:06:39 Monthadar Al Jaberi wrote:
> Hi,
>
> This line 1466 in ieee80211_mesh.c:
> frm += frm[2] + 2;
>
> When I look at the other modes it should be
> frm += frm[1] + 2;
>
> ??
Committed, thanks!
--
Bernhard
___
freebsd-n
On Jan 17, 2011, at 8:11 AM, Schoch Christian wrote:
> I did some test with multihoming and failover. My problem is that if one
> transport failes it never comes back to active (no heartbeats are sent any
> more).
>
> My setup:
>
> FreeBSD 8.1 Linux 2.6.36
> 172.16.1.4 - 172.1
Hi!
On 19.01.2011 17:57:00 +0100, Bernhard Schmidt wrote:
> > > So there is the one issue only: the panic if runfw.ko and
> > > wlan_amrr.ko both loaded via loader.conf.
> > > Have you any ideas?
> >
> > No yet, I'll dig around there later today.
>
> Hmm, I'm not able to reproduce this, works a
On Jan 19, 2011, at 11:02 PM, Schoch Christian wrote:
> Dear Michael,
>
> as I could figure out, the problem with UNCONFIRMED is solved. My test tools
> is based on lksctp-tools and written for linux testing. Now the problem here
> is that there is a inconsistency between linux and FreeBSD of t
Dear Michael,
as I could figure out, the problem with UNCONFIRMED is solved. My test
tools is based on lksctp-tools and written for linux testing. Now the
problem here is that there is a inconsistency between linux and
FreeBSD of the return value of spinfo_state. Perhaps these return
valu
On Tue, Jan 18, 2011 at 07:35:30PM +0100, sth...@nethelp.no wrote:
> > > I'm seeing the same problem with Broadcom NetXtreme (bce) cards:
> > >
> > > bce0@pci0:3:0:0:class=0x02 card=0x03421014 chip=0x164c14e4
> > > rev=0x12 hdr=0x00
> > > vendor = 'Broadcom Corporation'
> > >
- Original Message
> From: Alexander Zagrebin
> To: PseudoCylon
> Cc: freebsd-net@freebsd.org
> Sent: Wed, January 19, 2011 5:07:46 AM
> Subject: Re: if_run and wlan_amrr: kernel panics on 8.2-PRERELEASE amd64
>
> > Yes, there is.
> > Due to lack of documents, I haven't figured out how
Synopsis: [ath] Atheros ar9287 card does not get recognized.
Responsible-Changed-From-To: freebsd-net->adrian
Responsible-Changed-By: adrian
Responsible-Changed-When: Thu Jan 20 06:34:53 UTC 2011
Responsible-Changed-Why:
I'm acting as spear-head for atheros stuff for now.
http://www.freebsd.org
Hiya,
I'll take this over.
Making it recognised isn't going to be too difficult. Making it
stable, that's a whole other problem. I'm happy to commit the bare
minimum needed to make the AR9287 recognised but there's quite a bit
of further work needing to be done to the AR9280 support before I'm
co
16 matches
Mail list logo
