Hi.
You're right, net.link.bridge.ipfw must be set to 1 to enable layer2
filtering. Anyway, divert still doesn't work.
Thanks!
Carlos
Andrew Thompson wrote:
On Tue, May 09, 2006 at 05:45:02PM -0300, Carlos E Gaspar wrote:
Hi.
I have the following setup:
FreeBSD abc5.5-PRERELEASE FreeBS
hi,
i have a question about these similar problems with bridging.
i use if_bridge on a FreeBSD 6.1 Box.
ipfw doesn't support fwd rules via bridge. So that i had to use pf for
transparent proxying.
but pf doesnt work like fwd. pf makes nat (rdr) on packets, so that
proxy software can't find the o
On Wed, May 10, 2006 at 10:07:10AM +0400, Andrey V. Elsukov wrote:
> Julian Elischer wrote:
> > I have changes that make it work in 4.x but they will not apply to 5.x
> > or later..
> > Luigi also has some changes that allow it..
>
> I can try porting an older patches which allow this.
> Is there
Julian Elischer wrote:
I have changes that make it work in 4.x but they will not apply to 5.x
or later..
Luigi also has some changes that allow it..
I can try porting an older patches which allow this.
Is there a chance for including this feature into base system?
--
WBR, Andrey V. Elsukov
_
On Tue, May 09, 2006 at 05:45:02PM -0300, Carlos E Gaspar wrote:
> Hi.
>
> I have the following setup:
>
> FreeBSD abc5.5-PRERELEASE FreeBSD 5.5-PRERELEASE #0: Wed Apr 26 14:58:22
> BRT 2006 [EMAIL PROTECTED]:/usr/src/sys/alpha/compile/ABC alpha
>
> bridge0: flags=8043 mtu 1500
>eth
Carlos E Gaspar wrote:
Hi.
I have the following setup:
FreeBSD abc5.5-PRERELEASE FreeBSD 5.5-PRERELEASE #0: Wed Apr 26
14:58:22 BRT 2006 [EMAIL PROTECTED]:/usr/src/sys/alpha/compile/ABC alpha
bridge0: flags=8043 mtu 1500
ether xx:xx:xx:xx:xx:xx
priority 32768 hellotime 2 f
Hi.
I have the following setup:
FreeBSD abc5.5-PRERELEASE FreeBSD 5.5-PRERELEASE #0: Wed Apr 26 14:58:22
BRT 2006 [EMAIL PROTECTED]:/usr/src/sys/alpha/compile/ABC alpha
bridge0: flags=8043 mtu 1500
ether xx:xx:xx:xx:xx:xx
priority 32768 hellotime 2 fwddelay 15 maxage 20
