** Reply to note from [EMAIL PROTECTED] (Bill Paul) Tue, 29 Jul 2003 12:18:33 -0700
(PDT)
> If your switch is not managed and doesn't allow you to manually
> configure the port settings, then you're out of luck. You'll just
> have to live with half duplex mode.
Sigh: this is the case. :(
Well
> ** Reply to note from "Sreekanth" <[EMAIL PROTECTED]> Tue, 29 Jul 2003 09:53:05 -0700
>
>
> > > Ok, so I tried:
> > >
> > > ifconfig xl0 mediaopt autoselect
> > >
> > > but I get:
> > >
> > > ifconfig: SIOCSIFMEDIA: Device not configured
>
> >Try
> >ifconfig xl0 media auto
>
> Ditto
** Reply to note from "Sreekanth" <[EMAIL PROTECTED]> Tue, 29 Jul 2003 09:53:05 -0700
> > Ok, so I tried:
> >
> > ifconfig xl0 mediaopt autoselect
> >
> > but I get:
> >
> > ifconfig: SIOCSIFMEDIA: Device not configured
>Try
>ifconfig xl0 media auto
Ditto. I get the same message.
by
Try
ifconfig xl0 media auto
Sreekanth
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Andrea Venturoli
> Sent: Tuesday, July 29, 2003 4:47 PM
> To: [EMAIL PROTECTED]
> Subject: Re: xl0 full duplex
>
>
> **
** Reply to note from Olivier Nicole <[EMAIL PROTECTED]> Mon, 21 Jul 2003 16:56:30
+0700 (ICT)
>> since it is connected to a full-duplex switch.
>Is the port set to full-duplex? Or to auto configuration?
There is no such options: it's always using Auto-Negotiation.
>If the last, the default
** Reply to note from "Kevin Stevens" <[EMAIL PROTECTED]> Mon, 21 Jul 2003 02:53:35
-0700 (PDT)
>Do you know that full-duplex is supported and enabled on the switch for
>10Mb operation? Some only support half-duplex for 10Mb, others have to be
>forced.
Quoting the manual:
This Switch supports
> since it is connected to a full-duplex switch.
Is the port set to full-duplex? Or to auto configuration?
If the last, the default is to fall in half duplex degradated mode.
Auto configuration will only work when both ends are set to auto.
Olivier
__
> xl0: flags=8943 mtu 1500
> options=3
> inet 10.1.2.15 netmask 0xff00 broadcast 10.1.2.255
> inet 10.1.2.126 netmask 0x broadcast 10.1.2.126
> ether 00:00:5e:00:01:02
> media: Ethernet 10baseT/UTP (10baseT/UTP )
>
> I tried:
>
> ifconfig xl0 10.1
