On 07/05/17 07:28, Oleg Lelchuk wrote:
Yes, I am having exactly the same problem that Shteryana described. I also
got messages about wrong ip length when I started dhclient for ue0. If I
plug my device into a usb 2.0 port and enable flow control, I get
networking speeds that are around 250 Mbit/s
Yes, I am having exactly the same problem that Shteryana described. I also
got messages about wrong ip length when I started dhclient for ue0. If I
plug my device into a usb 2.0 port and enable flow control, I get
networking speeds that are around 250 Mbit/sec. If flow control is disabled
and the d
On 06/15/17 20:29, Tom Huerlimann wrote:
Hello HPS
Thank you for your help and your investigation on this.
I start a couple of additional test in the next few days and let you know if I
can find additional details.
Just to be sure:
What was the FreeBSD version you have tested with?
Best re
Hi all,
I've experienced a similar problem but didn't get to analyzing it
deeper (or reporting) unfortunately ; the device is
ugen0.8: at usbus0, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=ON (124mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0300
bDeviceClass = 0x00ff
bDeviceS
On 05/25/17 20:37, Tom Huerlimann wrote:
Hi all,
I have the problem, that I cannot reach more than 20-40Mbit/s when using the
AX88179 chip (1Gbit/s NIC) on a USB 3.0 SuperSpeed Port (same on a 480Mbps
High Speed USB v2.0-Port).
# usbconfig dump_device_desc
(...)
ugen0.7: at usbus0, cfg=0 md=HO
