yes,
you are right
regards,
misho
- Original Message -
From: "Luigi Rizzo" <[EMAIL PROTECTED]>
To: "misho" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, December 06, 2001 5:00 AM
Subject: Re: HEADS-UP: net polling code now in STABLE.
On Thu, Dec 06, 2001 at 04:50:46AM +0200, misho wrote:
> Hi Luigi,
>
> I found this bug several days ago, but I don;t have free time to send you
> simple patch.
> In my opinion it;s better to disable interrupts in xxx_intr() code when
> device is in polling mode.
> Something like this:
I have co
XP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE);
return;
}
if (ether_poll_register(fxp_poll, ifp)) {
...
regards,
misho
- Original Message -
From: "Luigi Rizzo" <[EMAIL PROTECTED]>
To: "Michael Nottebrock" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, Dec
On Wed, Dec 05, 2001 at 04:08:06PM +0100, Michael Nottebrock wrote:
> Luigi Rizzo wrote:
>
> >i just committed a patch to dev/fxp/if_fxp.c pci/if_dc.c and
> >pci/if_sis.c which should fix this. It's a very simple one so you
> >can just fetch the diff from the cvs repository and rebuild the
> >ker
Luigi Rizzo wrote:
> i just committed a patch to dev/fxp/if_fxp.c pci/if_dc.c and
> pci/if_sis.c which should fix this. It's a very simple one so you
> can just fetch the diff from the cvs repository and rebuild the
> kernel, without having to upgrade the whole system.
The system boots fine now,
[Bcc to -stable]
On Tue, Dec 04, 2001 at 01:14:37PM +0100, Michael Nottebrock wrote:
...
> > and enable it at runtime as follows (by default it is disabled):
> >
> > sysctl kern.polling.enable=1
>
> Putting that into /etc/sysctl.conf results in a solid hang on bootup
i just committ
Luigi Rizzo wrote:
> Could you try and insert an "ifconfig" (to see the status of the
> interface) before the point where it hangs ?
Done, output attached. I inserted the 'ifconfig' into /etc/rc.network,
just between the "#gifconfig"-section and the "# Set up all the network
interfaces..."-se
On 2001.12.03 22:17 Luigi Rizzo wrote:
> [Bcc to -stable because of relevance there]
>
> With the approval of the release engineer, a revised version of
> the network polling code is now in STABLE. It would be great if
> you could try it out and send feedback, so we con sort out issues
> (if an
> Putting that into /etc/sysctl.conf results in a solid hang on bootup
> here, right after IP Filter init and before the interfaces come up:
thanks, I am investigating this, it should be trivial to fix.
Could you try and insert an "ifconfig" (to see the status of the
interface) before the point
Luigi Rizzo wrote:
>
> options DEVICE_POLLING
> options HZ=1000 # not compulsory but strongly recommended
>
> and enable it at runtime as follows (by default it is disabled):
>
> sysctl kern.polling.enable=1
Putting that into /etc/sysctl.conf results in
could you patch rl driver, we have 100 RealTek 8139 cards here.
Regards,
--
David Xu
Luigi Rizzo wrote:
>[Bcc to -stable because of relevance there]
>
>With the approval of the release engineer, a revised version of
>the network polling code is now in STABLE. It would be great if
>you could t
Hi Luigi,
On Mon, 3 Dec 2001, Luigi Rizzo wrote:
> [Bcc to -stable because of relevance there]
>
> With the approval of the release engineer, a revised version of
> the network polling code is now in STABLE. It would be great if
> you could try it out and send feedback, so we con sort out issu
On Tue, Dec 04, 2001 at 07:37:31AM -, Lawrence Farr wrote:
> Have you any tests I could run to verify it's stability?
no, other than flood the interfaces with traffic and see the
difference when turning kern.polling.enable on and off...
cheers
luigi
> Lawrence Farr
> EPC Dir
Have you any tests I could run to verify it's stability?
Lawrence Farr
EPC Direct Limited
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of Luigi Rizzo
> Sent: 04 December 2001 06:18
> To: [EMAIL PROTECTED]
> Subject: HEA
[Bcc to -stable because of relevance there]
With the approval of the release engineer, a revised version of
the network polling code is now in STABLE. It would be great if
you could try it out and send feedback, so we con sort out issues
(if any) before the release of 4.5.
Do not be afraid to u
15 matches
Mail list logo
