Spanning Tree is disabled on the ports.
Best Regards
On 08/01/2015 16:45, Sascha wrote:
Le Mon, 05 Jan 2015 07:57:33 +0100,
Sascha a écrit :
Hello,
you made my day! It's working again. But I continue my research.
Rebooting takes the Port-Channel on the switch down. When the machine
explains what parameters
you can set. But without understanding whats going on it gets some trial
and error. Maybe there is still a description and I didn't find it until
now.
Thanks for the help!
Best regards
Sascha
On 02/01/2015 16:14, Steven Hartland wrote:
Since 10 we're had
Hi and a happy new year to everyone!
I have problems with my carp setup between two Routers/Firewalls after
upgrade from 10.0 RELEASE to 10.1 RELEASE.
Before the upgrade my setup worked without any problems!
After the upgrade I checked the carp status. Machine 2 (Backup machine)
is in Master
0 pass mypass 192.168.0.100/24"
defaultrouter="192.168.0.10"
Did you check if advertisements are sent from the interface after booting
tcpdump -npi em0 -T carp
Regards
Sascha
HI Sascha,
This example is wrong:
ifconfig_em0="inet vhid 10 pass mypass alias 192.168.0.100/32"
confused about setting up a default route
Details can be found here:
https://forums.freebsd.org/viewtopic.php?f=7&t=48443
But it seems that you configured your interface different like described
in the manual. I'm a bit surprised that this configuration is working.
regards
Sascha
Am 1
n
scripts, only with /etc/rc.conf?
Hi Lev,
just use another static route instead of the ipv6_defaultroute entry:
ipv6_static_routes="ipv6defgw ipv6defgwroute"
ipv6_route_ipv6defgw="2a01:4f8:131:60a0:: -prefixlen 59 -iface re0"
ipv6_route_ipv6defgwroute="defa
(RTL8168/8111/8111c)'
class = network
subclass = ethernet
Is there anything i can do to force the full-duplex setting for good?
Regards,
Sascha
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
be some kind of buffer issue.
I already raised kern.ipc.maxsockbuf to 16777216 and the nmbclusters is
still at 25600 which seems fine according to the mbuf statistic above.
This is on a GENERIC FreeBSD 6.2 system with an em network card at
100mbit.
Gree
On Mon, Apr 18, 2005 at 10:47:06PM +0200, [EMAIL PROTECTED] wrote:
> The vlan(4) device is not yet officially supported for carp(4). It works for
> NICs which talks to mii, but cards such as em(4) could get problems.
is this still the current status for 5.4 and CURRENT and if yes, is a patch
ava
after 65k on either client
machine. Downloads on the gateway box are normal.
Anything < 65k is normal as well.
The MTU of the tunnel is 1280.(I've tried reducing the MTU on the wireless interfaces,
makes no difference)
Has anybody else come across this issue?
Cheers
Hello,
is the Linksys 54MBit WLAN Adapters supportet ?
Model WMP54G for PCI Variante and Model WPC54G for the PCMCIA.
Both Card's i need under FreeBSD 4.x or 5.x
Thanks for help
Sascha
___
[EMAIL PROTECTED] mailing list
http://lists.freebs
11 matches
Mail list logo
