FreeBSD 10.3-RELEASE
The fine man page promises:
netstat -i | -I interface -s [-46] [-f protocol_family | -p protocol]
[-M core] [-N system]
Display per-interface statistics for each network protocol, for a
particular protocol_family, or for a single pro
> 10.3-RELEASE
> amd64 with ECC memory
> VIA VL805 USB 3.0 controller
> ue0 is Siig USB-to-Ethernet Chipset: AX88179
>
> ugen0.7: at usbus0, cfg=0 md=HOST
>spd=SUPER (5.0Gbps) pwr=ON (124mA)
>
> ue0: flags=8c43 metric 0
> mtu 1500
> options=8000b
> inet 10.0.210.66 netmas
10.3-RELEASE
amd64 with ECC memory
VIA VL805 USB 3.0 controller
ue0 is Siig USB-to-Ethernet Chipset: AX88179
ugen0.7: at usbus0, cfg=0 md=HOST
spd=SUPER (5.0Gbps) pwr=ON (124mA)
ue0: flags=8c43 metric 0
mtu 1500
options=8000b
inet 10.0.210.66 netmask 0xff00 broadcast
Multiple people have found that FreeBSD's re(4) driver for Realtek
Ethernet chips has problems. Something like a rcp(1) with another
FreeBSD box merely runs slower due to the stalls, but if the other end
has buggy network code and/or if the transfer is forced to use UDP
(Unreliable Data Protocol)
I'm sorry that I'm unable to test iwi firmware v3.1 with FBSD 7.2 on my
WLAN laptop, but at the moment I need the installed FBSD 6.4 on this PC.
Anybody of you who can test iwi v3.1?
Regards
Dieter
___
freebsd-net@freebsd.org mailing list
h
> I'm investigating an issue we are seeing with 6.1-RELEASE and the bge
> driver dropping packets sporadically at 100MBps speed.
> Its get mainly aggravated when heavy disk I/O occurs
> Has anyone seen this problem before with bge? Am I barking up the
> wrong tree with my initial investigation?
> > Hopefully there will be direct memory bus connected nic's in future.
> > (HyperTransport connected nic's)
>
> Well that is going to be an AMD only solution, and I'm not even shure
> that AMD would like to have other things than CPU's on that bus.
There are FPGAs that plug into a CPU socket (
> I'm looking into the syslogd capabilities at the moment, it might be
> enough.
> I've tried following the serial console setup you've pointed, but when I
> added the 'console=3D"comconsole"' to loader.conf the OS hanged during
> boot time, had to re-install the system.
I assume the info you need
