> > > I would say the physical wire is probably bad. Seeing unidirectional
> > errors
> > > in this case wouldn't be uncommon; one of the pair of the receive
wires
> > may
> > > have issues. Have you swapped the cable? Most of the time you won't
see
> > > framing errors related to duplex mismatc
Current FreeBSD problem reports
Critical problems
Serious problems
Non-critical problems
S Submitted Tracker Resp. Description
---
o [2002/05/04] kern/37761 net process exits but socket is still ESTAB
Current FreeBSD problem reports
Critical problems
Serious problems
Non-critical problems
S Submitted Tracker Resp. Description
---
o [2002/05/04] kern/37761 net process exits but socket is still ESTAB
hi, there!
On Mon, Jul 21, 2003 at 08:27:15AM +0200, Roger Olofsson wrote:
> I have searched the machine for nwfs.ko and it doesn't exist. I have of
> course rebuilt kernel with options IPX and recompiled ncplib to make sure
> that it didn't 'get lost' during that process. I have also cvsupped
Hye !!!
Ok, yesterday, I posted a question, and someone answerd me, but, the solution
(or what I've done to install it) failed.
Does someone could say me why ?
The situation is described below:
Ethernet
ADSL
modem
o ---10.0.0.0/24--- A --- 10.1.0.0 / 24 ---
|
> since it is connected to a full-duplex switch.
Is the port set to full-duplex? Or to auto configuration?
If the last, the default is to fall in half duplex degradated mode.
Auto configuration will only work when both ends are set to auto.
Olivier
__
> xl0: flags=8943 mtu 1500
> options=3
> inet 10.1.2.15 netmask 0xff00 broadcast 10.1.2.255
> inet 10.1.2.126 netmask 0x broadcast 10.1.2.126
> ether 00:00:5e:00:01:02
> media: Ethernet 10baseT/UTP (10baseT/UTP )
>
> I tried:
>
> ifconfig xl0 10.1
On Mon, Jul 21, 2003 at 08:27:15AM +0200, Roger Olofsson wrote:
> Hello Kris and thank you for your swift reply,
>
> I have searched the machine for nwfs.ko and it doesn't exist. I have of
> course rebuilt kernel with options IPX and recompiled ncplib to make sure
> that it didn't 'get lost' dur
Hello.
I have a 3C905 PCI 10Mb/s Ethernet Card, which i configure with:
ifconfig_xl0="inet 10.1.2.15 netmask 255.255.255.0"
in /etc/rc.conf.
ifconfig shows:
xl0: flags=8943 mtu 1500
options=3
inet 10.1.2.15 netmask 0xff00 broadcast 10.1.2.255
inet 10.1.2.126 netmask
