WaveLAN broken (repost)

this message may have been posted to hacks but I didnt see it come through. I greatly apreciate any help. I have a WaveLAN ISA adaptor. I am trying to run it in a machine equiped with an AMD K6-2 350 processor running at 66mhz bus speed. I am getting the following error while ifconfiging the card

WaveLAN broken (repost)

this message may have been posted to hacks but I didnt see it come through. I greatly apreciate any help. I have a WaveLAN ISA adaptor. I am trying to run it in a machine equiped with an AMD K6-2 350 processor running at 66mhz bus speed. I am getting the following error while ifconfiging the car

Intel 810/BookPC

Sorry if this is a repost but I didnt see it come throug yet and my mail was screwed up. I am working with a BookPC whith an intel 810 all in one chipset. I was wondering if there was planned support for the sound and if someone has heard anyting about the Xfree86 (linux) LKM being ported to Fre

4.0 using dd and cdroms

I have tried using dd on serveral 4.0 systems in order to capture an image off a cdrom. I tried dd if=/dev/acd0a of=file.img as well as on a scsi system (/dev/cd0a) and eovery other cd device (/dev/acd0c /cdv/racd0c /dev/cd0c ect) and I get dd: /dev/acd0a Bad address 0+0 records in 0+0 records

Davicam dc0 driver

I have a BookPC with a built in Davi Comm 10/100 ethernet card. I am always getting /kernel: dc0: watchdog timeout every few minutes.. Can thease errors be stopped? Thank you for any reply RP [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-hacke

ahc0: Signaled a Target Abort

I am trying to get a adaptec 3940 AUW controller to work with an Asus Athlon motherboard (newer AMD 751 chipset) and I have tried 3.3-R 3-4R and 4.0-R and all boot untill it says,... Waiting 15 Seconds for SCSI devices to settle ahc0: Signaled a Target Abort (this is after about 15 seconds)

wi0 ISA adaptor

I am using a WavLAN ISA adaptor.. it comes up as pcic0: at port 0x3e2 iomem 0xd irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 have it set in the kernel as. device pcic0 at isa? irq 10 port 0x3e2 iomem 0xd I have also tired device

xe driver

FYI I tried the xe driver in 4.0-Stable and could not get it to work. I have a 16bit Xircomn RE-10 ethernet adaptor. here is what I tried /etc/pccard.conf # Xircom CreditCard Ethernet 10/100 + modem (Ethernet part) card "Xircom" "Ethernet Adapter" config auto "xe1" 9 insert l

Re: Xircom cards

I cvsuped to 5.0-current and am trying the Xircom driver now. I want to provide as much information as needed. below is information on how I built my kernel and various configuration files. Upon insertion I get the below message. and although I can see the card with netstat -in as soon as I run

Xircom Card

I just cvsuped and built a kernel as of Sun Apr 30 03:20:08 HST 2000. Despite the probing which goes on when I insert the card and somtimes shortly after I ifconfig it, the Xircom 16bit card seems to work fine. I also have a Card Buss Xircom card which I could also test with. RP [EMAIL PROTECTED

BROKEN_KEYBOARD_RESET

Is this the kernel setting to dislable ctrl-alt-delete from resetting a systtem? If so it seems to be broken in 4.0-RELEASE. is there another way of doing this? remaping keyboard perhaps? # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is

Re:BROKEN_KEYBOARD_RESET

Sorry for the stupid quiestion. I figured it out from LINT that is the options SC_DISABLE_REBOOT # disable reboot key sequence Thanks Richard Puga [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-hackers" in the body of the message