On Sep 11, Mike Smith wrote:
> > ok, once i compiled a kernel with options BOOTP things got better ;-)
> > it worked several times, but now it boots ok, (pxe->dhcp->tftpboot->nfs)
> > but after it re-configures the ethernet, the ethernet stops working!
> >
> > ponters anyone?
>
> You can't run d
> ok, once i compiled a kernel with options BOOTP things got better ;-)
> it worked several times, but now it boots ok, (pxe->dhcp->tftpboot->nfs)
> but after it re-configures the ethernet, the ethernet stops working!
>
> ponters anyone?
You can't run dhclient (DHCP in any of the ifconfig lines
On Sat, 9 Sep 2000, Greg Lehey wrote:
> Please don't use bonnie. It's not measuring what you think it is.
OK, I used rawio as you suggested.
> I don't know how you'd find anything at vinumvm.org which tells you
> what to expect from bonnie.
No I did not. I found that I should be expecting abo
Is it widely known and expected that the SIOCSIFADDR and companion commands
dont work in FreeBSD 4.1? I know that the preferred command is SIOCAIFADDR,
but shouldnt the standard calls also work for compatibility with portable
code?
dennis
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "uns
I see that, months after reporting the problem, the if_dc driver still
takes 3 underruns to get to where its usable on a 100Mb/s network.
Since i have no docs, can someone help with a hack that starts the device
in store-and-forward mode? Im sure im not the only one who needs this.
dennis
To
On Fri, Sep 08, 2000 at 02:04:52AM -0400, Mike Nowlin wrote:
>
> > I sent this to questions a couple of weeks ago, but didn't receive any
> > helpful replies. Anyone doing this - two machines connected by a null-modem
> > cable with the ability to create a serial terminal session from either
>
im getting better, answering my own requests :-)
long story, short message
/usr was not being mounted!
now why it worked and suddenly stopped, i don't have a clue.
next mile-stone:
how do i get hostname set? currently it's null/Amesiac.
In message <[EMAIL PROTECTED]>you write:
>
> I have had about 2MB/sec out of a Netgear FX410. This is a NE2000 clone
> that is supported by if_ed under 4-STABLE.
I use a linksys ect2 card and get about the same (it's also an ne2000
clone).
Fred
--
Fred Clift - [EMAIL PROTECTED] -- Remember: If brute
force doesn't work, you're just n
In message <[EMAIL PROTECTED]>you w
rite:
}Are you sure that it's listening on the right media (utp/bnc/aui)?
}
}There might be a problem where the machine downloads the kernel, boots the
}kernel, reprobing the NIC, setting it to a different media. What's the probe
}look like?
}
but it worked!!
a
ok, once i compiled a kernel with options BOOTP things got better ;-)
it worked several times, but now it boots ok, (pxe->dhcp->tftpboot->nfs)
but after it re-configures the ethernet, the ethernet stops working!
ponters anyone?
danny
To Unsubscribe: send mail to [EMAIL PROTECTED]
w
In message <[EMAIL PROTECTED]>, awr writ
es:
>
>Also, shouldn't /usr/src/sys/dev/vn/vn.c use make_dev() and destroy_dev()
>calls instead of cdevsw_add()??
Yes :-)
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
[EMAIL PROTECTED] | TCP/IP since RFC 956
FreeBSD coreteam member | BS
The following excerpt from isc-dhcp3-3.0.b1.17's dhcpd.conf works for me:
subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.193 192.168.1.208;
filename "/tftpboot/ringnet.kernel.fd0";
option root-path "192.168.1.2:/usr/n/ringrowl/root";
host ringrowl {
hardware ethernet 00:
12 matches
Mail list logo
