Hans Petter Selasky wrote:
> On 06/23/13 10:33, Ian FREISLICH wrote:
> > status 0xea1a1
> > 10:29:19.904434 usbus0.2 SUBM-BULK-EP=0002,SPD=FULL,NFR=1,SLEN=4,IVAL=0
> > frame[0] WRITE 1 bytes
> > 6F -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- |o
|
> > flags 0x9
On 06/23/13 10:33, Ian FREISLICH wrote:
status 0xea1a1
10:29:19.904434 usbus0.2 SUBM-BULK-EP=0002,SPD=FULL,NFR=1,SLEN=4,IVAL=0
frame[0] WRITE 1 bytes
6F -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- |o |
flags 0x9
status 0x4a023
If you don't get a DONE-BU
Hans Petter Selasky wrote:
> On 06/22/13 20:54, Ian FREISLICH wrote:
> > "Daniel O'Connor" wrote:
> >>
> >> On 22/06/2013, at 4:10, Ian FREISLICH wrote:
> >>> I bought a relay control board that has a USB interface. It presents
> >>> a serial port to Linux on /dev/ttyACMx. However when I plug it
On 06/22/13 20:54, Ian FREISLICH wrote:
"Daniel O'Connor" wrote:
On 22/06/2013, at 4:10, Ian FREISLICH wrote:
I bought a relay control board that has a USB interface. It presents
a serial port to Linux on /dev/ttyACMx. However when I plug it
into my FreeBSD host, it detects as follows:
uge
"Daniel O'Connor" wrote:
>
> On 22/06/2013, at 4:10, Ian FREISLICH wrote:
> > I bought a relay control board that has a USB interface. It presents
> > a serial port to Linux on /dev/ttyACMx. However when I plug it
> > into my FreeBSD host, it detects as follows:
> >
> > ugen0.2: at usbus0
> >
On 22/06/2013, at 4:10, Ian FREISLICH wrote:
> I bought a relay control board that has a USB interface. It presents
> a serial port to Linux on /dev/ttyACMx. However when I plug it
> into my FreeBSD host, it detects as follows:
>
> ugen0.2: at usbus0
> umodem0: on usbus0
> umodem0: data inte
Hi
I bought a relay control board that has a USB interface. It presents
a serial port to Linux on /dev/ttyACMx. However when I plug it
into my FreeBSD host, it detects as follows:
ugen0.2: at usbus0
umodem0: on usbus0
umodem0: data interface 1, has no CM over data, has no break
and I cannot
