Hi Martin:
On Tue, 10 Sep 2002, Martin Blapp wrote:
> > and Martins patch:
> > This one works standalone and with 2 and 3 above. It seems to have
> > increase ftp transfer rates too from 8600Kbytes/sec to 10577Kbytes/sec.
>
> Cool.
Seems to depend on which notebook the card is in. Wit
On Tue, 10 Sep 2002, Martin Blapp wrote:
Hi,
> > 1) dc driver uses wrong case to read MAC from eeprom.
> >
> > http://www.FreeBSD.org/cgi/query-pr.cgi?pr=kern/35482
> >
> > This one seems to break data sending/receiving as the only thing that
> > works is pinging and that's only on the alias/sec
Hi,
> 1) dc driver uses wrong case to read MAC from eeprom.
>
> http://www.FreeBSD.org/cgi/query-pr.cgi?pr=kern/35482
>
> This one seems to break data sending/receiving as the only thing that
> works is pinging and that's only on the alias/secondary IP and not the
> primary IP network which is c
Hi,
> and Martins patch:
> This one works standalone and with 2 and 3 above. It seems to have
> increase ftp transfer rates too from 8600Kbytes/sec to 10577Kbytes/sec.
Cool.
> Ofcourse, for some odd reason, if the ftp was done from a Windows XP Pro
> machine, it's only 6722KBytes/sec.
Hmm. T
On Thu, 5 Sep 2002, Martin Blapp wrote:
> > When I tried these patches manually handpatching on 08182002 JP
> > SNAPSHOT, it took away the error messages like you had mentioned except
> > I can ping everything except for the gateway. Also, no other protocols
> > would work at all so it seems
On Mon, Sep 09, 2002 at 11:59:08PM +1000, Stephen McKay wrote:
> This driver represents a counterintuitive state of affairs. I was impressed
> when Bill Paul managed to support so many clone cards with one driver. But
> now nobody has enough hardware on hand to test any change properly. There's
On Wednesday, 4th September 2002, Martin Blapp wrote:
>And this patch here together with patch III made the annoying messages (dc0:
>failed to force tx and rx to idle mode) go away. And I can use now my card
>without to replug the cable over again)
I've been meaning to remove the annoying messag
On Thu, 5 Sep 2002, Martin Blapp wrote:
> Hi,
>
> > When I tried these patches manually handpatching on 08182002 JP
> > SNAPSHOT, it took away the error messages like you had mentioned except
> > I can ping everything except for the gateway. Also, no other protocols
> > would work at all so
Hi,
> When I tried these patches manually handpatching on 08182002 JP
> SNAPSHOT, it took away the error messages like you had mentioned except
> I can ping everything except for the gateway. Also, no other protocols
> would work at all so it seems like something else broke. I took out
>
On Wed, 4 Sep 2002, Martin Blapp wrote:
>
> Hi all,
>
> Anybody who can, please commit these PR's.
>
> 1) dc driver uses wrong case to read MAC from eeprom.
>
> http://www.FreeBSD.org/cgi/query-pr.cgi?pr=kern/35482
>
>
> 2) Tulip ether card EN2242 (if_dc.c) use wrong multicast table
>
> http://ww
OK, I've grabbed these...
M
>
> Ups, forgot to add here the PR number ...
>
> > 3) ADMtek AN98x, enable automatically TX underrun recovery
>
> http://www.FreeBSD.org/cgi/query-pr.cgi?pr=34236
>
> > Patch No3 fixes some part of link problem on EN2242 cards.
> > I've tested this patch and it m
Ups, forgot to add here the PR number ...
> 3) ADMtek AN98x, enable automatically TX underrun recovery
http://www.FreeBSD.org/cgi/query-pr.cgi?pr=34236
> Patch No3 fixes some part of link problem on EN2242 cards.
> I've tested this patch and it makes by laptop working again with
> cvsup.
Mart
Hi all,
Anybody who can, please commit these PR's.
1) dc driver uses wrong case to read MAC from eeprom.
http://www.FreeBSD.org/cgi/query-pr.cgi?pr=kern/35482
2) Tulip ether card EN2242 (if_dc.c) use wrong multicast table
http://www.FreeBSD.org/cgi/query-pr.cgi?pr=misc/32699
3) ADMtek AN9
13 matches
Mail list logo
