On Apr 4, 2012 10:02 PM, "Matt Thyer" wrote:
>
> On 3 April 2012 23:12, Gary Palmer wrote:
>>
>> I think you should contact either SuperMicro or LSI and open a support
>> case as it looks like there could be a problem with either the controller
>> or the firmware when presented with mixed speed d
On 3 April 2012 23:12, Gary Palmer wrote:
> On Tue, Apr 03, 2012 at 10:52:25PM +0930, Matt Thyer wrote:
> > I forgot to mention that I'm still having problems after this phase 11
> > firmware upgrade with the 6 Gbps drive being kicked out of the raidz2
> with
> > write errors (even though a SMART
On Tue, Apr 03, 2012 at 10:52:25PM +0930, Matt Thyer wrote:
> On Mar 27, 2012 11:50 PM, "Matt Thyer" wrote:
> >
> > I was having problems with the WD20EARX-00P AB51 drive being faulted by
> ZFS until I updated the firmware to 11 and now ZFS is happy (I've also done
> a full extended drive SMART te
On Mar 27, 2012 11:50 PM, "Matt Thyer" wrote:
>
> I was having problems with the WD20EARX-00P AB51 drive being faulted by
ZFS until I updated the firmware to 11 and now ZFS is happy (I've also done
a full extended drive SMART test and the drive is fine).
>
I forgot to mention that I'm still having
On 28 March 2012 03:51, Kenneth D. Merry wrote:
> On Tue, Mar 27, 2012 at 23:50:31 +1030, Matt Thyer wrote:
> > On 26 March 2012 23:55, Gary Palmer wrote:
> >
> > > On Mon, Mar 26, 2012 at 08:05:59PM +1030, Matt Thyer wrote:
> > > > On Mar 26, 2012 3:43 AM, "Garrett Cooper"
> wrote:
> > > > >
>
On Tue, Mar 27, 2012 at 11:27 AM, Jason Wolfe wrote:
> On Tue, Mar 27, 2012 at 10:21 AM, Kenneth D. Merry wrote:
>> On Tue, Mar 27, 2012 at 23:50:31 +1030, Matt Thyer wrote:
>>> On 26 March 2012 23:55, Gary Palmer wrote:
>>>
>>> It's painful to take this system back to r230921 due to intolerance
On Tue, Mar 27, 2012 at 10:21 AM, Kenneth D. Merry wrote:
> On Tue, Mar 27, 2012 at 23:50:31 +1030, Matt Thyer wrote:
>> On 26 March 2012 23:55, Gary Palmer wrote:
>>
>> It's painful to take this system back to r230921 due to intolerance for
>> downtime from it's users so I'd like to investigate
On Tue, Mar 27, 2012 at 23:50:31 +1030, Matt Thyer wrote:
> On 26 March 2012 23:55, Gary Palmer wrote:
>
> > On Mon, Mar 26, 2012 at 08:05:59PM +1030, Matt Thyer wrote:
> > > On Mar 26, 2012 3:43 AM, "Garrett Cooper" wrote:
> > > >
> > > > On Sun, Mar 25, 2012 at 5:16 AM, Matt Thyer
> > wrote:
On 26 March 2012 23:55, Gary Palmer wrote:
> On Mon, Mar 26, 2012 at 08:05:59PM +1030, Matt Thyer wrote:
> > On Mar 26, 2012 3:43 AM, "Garrett Cooper" wrote:
> > >
> > > On Sun, Mar 25, 2012 at 5:16 AM, Matt Thyer
> wrote:
> > > > Has this driver been MFC to 8-STABLE yet ?
> > > >
> > > > I'm a
On Mon, Mar 26, 2012 at 08:05:59PM +1030, Matt Thyer wrote:
> On Mar 26, 2012 3:43 AM, "Garrett Cooper" wrote:
> >
> > On Sun, Mar 25, 2012 at 5:16 AM, Matt Thyer wrote:
> > > On 21 January 2012 09:58, Kenneth D. Merry wrote:
> > >
> > >> On Fri, Jan 20, 2012 at 23:14:20 -, Steven Hartland w
On Mar 26, 2012 3:43 AM, "Garrett Cooper" wrote:
>
> On Sun, Mar 25, 2012 at 5:16 AM, Matt Thyer wrote:
> > On 21 January 2012 09:58, Kenneth D. Merry wrote:
> >
> >> On Fri, Jan 20, 2012 at 23:14:20 -, Steven Hartland wrote:
> >> > - Original Message -
> >> > From: "Kenneth D. Merry
On Sun, Mar 25, 2012 at 5:16 AM, Matt Thyer wrote:
> On 21 January 2012 09:58, Kenneth D. Merry wrote:
>
>> On Fri, Jan 20, 2012 at 23:14:20 -, Steven Hartland wrote:
>> > - Original Message -
>> > From: "Kenneth D. Merry"
>> > To: ;
>> > Sent: Friday, January 20, 2012 8:44 PM
>> >
On 21 January 2012 09:58, Kenneth D. Merry wrote:
> On Fri, Jan 20, 2012 at 23:14:20 -, Steven Hartland wrote:
> > - Original Message -
> > From: "Kenneth D. Merry"
> > To: ;
> > Sent: Friday, January 20, 2012 8:44 PM
> > Subject: LSI supported mps(4) driver available
> >
> >
> > >
> Out of those six Drive, one drive is detected as "1.5Gbps" (see below part in
> dmesg log)
>
> PHY[8].AttachedDevHandle: 0x0009
> PHY[8].LinkRate: 1.5Gbps (0x80)
> PHY[8].PhyStatus: NewTargetAdde
>
> LSI IR does not support mix of mix of different link speed Drivers in a
>
> -Original Message-
> From: Stas Orlov [mailto:senn...@gmail.com]
> Sent: Sunday, February 12, 2012 11:01 PM
> To: Desai, Kashyap
> Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-
> curr...@freebsd.org; Dennis Glatting
> Subject: Re: LSI supported mps(4) dr
> -Original Message-
> From: Kenneth D. Merry [mailto:k...@freebsd.org]
> Sent: Tuesday, February 07, 2012 10:30 PM
> To: Desai, Kashyap
> Cc: Stas Orlov; freebsd-s...@freebsd.org; freebsd-current@freebsd.org;
> Dennis Glatting
> Subject: Re: LSI supported mps(4) dri
On Tue, Feb 07, 2012 at 21:00:28 +0530, Desai, Kashyap wrote:
> Can you to reproduce issue with below mentioned changes..
>
> In mps.c
>
> mps_get_tunables(struct mps_softc *sc)
> {
> char tmpstr[80];
>
> /* XXX default to some debugging for now */
> sc->mps_debug = MPS_FAULT;
>
>
bsd.org; freebsd-current@freebsd.org; Kenneth D.
> Merry; Dennis Glatting
> Subject: RE: LSI supported mps(4) driver available
>
>
>
> > -Original Message-
> > From: Stas Orlov [mailto:senn...@gmail.com]
> > Sent: Monday, February 06, 2012 11:54 PM
&
> -Original Message-
> From: Stas Orlov [mailto:senn...@gmail.com]
> Sent: Monday, February 06, 2012 11:54 PM
> To: Desai, Kashyap
> Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-
> curr...@freebsd.org; Dennis Glatting
> Subject: Re: LSI supported mp
il.com]
> Sent: Thursday, February 02, 2012 8:29 PM
> To: Desai, Kashyap
> Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-current@freebsd.org;
> Dennis Glatting
> Subject: Re: LSI supported mps(4) driver available
>
>>> (Again clarify which version of FreeBSD you a
From: Stas Orlov [mailto:senn...@gmail.com]
Sent: Thursday, February 02, 2012 8:29 PM
To: Desai, Kashyap
Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-current@freebsd.org;
Dennis Glatting
Subject: Re: LSI supported mps(4) driver available
>> (Again clarify which version of F
FYI.
I just booted off a RAID1 array using this driver under RELENG_9 (below)
on a Tyan 8812's on-board LSI 2008 chip. I have a second FreeBSD system
with a LSI 9211-8i (IR) but it has a few more days of work before it can
do the same.
mc> dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Co
From: Stas Orlov [mailto:senn...@gmail.com]
> Sent: Thursday, February 02, 2012 7:45 PM
> To: Desai, Kashyap
> Cc: Kenneth D. Merry; freebsd-s...@freebsd.org;
> freebsd-current@freebsd.org; Dennis Glatting
> Subject: Re: LSI supported mps(4) driver available
>
> Sure, I&#x
From: Stas Orlov [mailto:senn...@gmail.com]
Sent: Thursday, February 02, 2012 7:45 PM
To: Desai, Kashyap
Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-current@freebsd.org;
Dennis Glatting
Subject: Re: LSI supported mps(4) driver available
Sure, I've made two RAID (1 and 10 ) a
2012 6:48 PM
> > To: Kenneth D. Merry
> > Cc: freebsd-s...@freebsd.org; freebsd-current@freebsd.org; Dennis
> > Glatting
> > Subject: Re: LSI supported mps(4) driver available
> >
> > Hi,
> >
> > We have a pack of identical Dell R610 mahcines with H200 c
latting
> Subject: Re: LSI supported mps(4) driver available
>
> Hi,
>
> We have a pack of identical Dell R610 mahcines with H200 cards.
>
> pciconf from R610 with FreeBSD9 on ZFS, disks in JBOD mode.
>
> mps0@pci0:3:0:0:class=0x010700 card=0x1f1e1028 c
Hi,
We have a pack of identical Dell R610 mahcines with H200 cards.
pciconf from R610 with FreeBSD9 on ZFS, disks in JBOD mode.
mps0@pci0:3:0:0:class=0x010700 card=0x1f1e1028 chip=0x00721000
rev=0x02 hdr=0x00
vendor = 'LSI Logic / Symbios Logic'
device = 'SAS2008 PCI-Ex
Kenneth D. Merry schreef:
>
> On Tue, Jan 24, 2012 at 15:42:57 +0100, Johan Hendriks wrote:
>> Kenneth D. Merry schreef:
>>> The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
>>> HBAs as well as WarpDrive controllers, is available here:
>>>
>>> http://people.freebsd.org/~
Kenneth D. Merry schreef:
On Tue, Jan 24, 2012 at 15:42:57 +0100, Johan Hendriks wrote:
Kenneth D. Merry schreef:
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs as well as WarpDrive controllers, is available here:
http://people.freebsd.org/~ken/lsi/mps_lsi.2012
On Wed, Jan 25, 2012 at 20:47:37 -0800, Dennis Glatting wrote:
> On Fri, 2012-01-20 at 13:44 -0700, Kenneth D. Merry wrote:
> > The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
> > HBAs as well as WarpDrive controllers, is available here:
> >
> > http://people.freebsd.org
On Fri, 2012-01-20 at 13:44 -0700, Kenneth D. Merry wrote:
> The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
> HBAs as well as WarpDrive controllers, is available here:
>
> http://people.freebsd.org/~ken/lsi/mps_lsi.20120120.1.txt
>
> I plan to check it in to head next
On 21/01/2012, at 7:14, Kenneth D. Merry wrote:
> In addition to supporting WarpDrive, the driver also supports Integrated
> RAID.
>
> Thanks to LSI for doing the work on this driver!
This is great news (the RAID support) - thanks very much.
Is there a corresponding userland tool, or plans for
On Fri, Jan 20, 2012 at 23:14:20 -, Steven Hartland wrote:
> - Original Message -
> From: "Kenneth D. Merry"
> To: ;
> Sent: Friday, January 20, 2012 8:44 PM
> Subject: LSI supported mps(4) driver available
>
>
> >
> >The LSI-supported version of the mps(4) driver that supports the
- Original Message -
From: "Kenneth D. Merry"
To: ;
Sent: Friday, January 20, 2012 8:44 PM
Subject: LSI supported mps(4) driver available
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs as well as WarpDrive controllers, is available here:
http://peop
On Fri, Jan 20, 2012 at 12:53:04 -0800, Freddie Cash wrote:
> On Fri, Jan 20, 2012 at 12:44 PM, Kenneth D. Merry wrote:
> > The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
> > HBAs as well as WarpDrive controllers, is available here:
>
> Just to clarify, this will repla
On Fri, Jan 20, 2012 at 12:44 PM, Kenneth D. Merry wrote:
> The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
> HBAs as well as WarpDrive controllers, is available here:
Just to clarify, this will replace the existing mps(4) driver in
FreeBSD 10-CURRENT and 9-STABLE?
So
36 matches
Mail list logo
