At 03:22 PM 2/24/2000 -0800, Mike Smith wrote:
> > megaraid: v107 (December 22, 1999)
> > megaraid: found 0x8086:0x1960:idx 0:bus 0:slot 10:func 1
> > scsi1 : Found a MegaRAID controller at 0xd0002000, IRQ: 12
> > megaraid: [GH6D:1.43] detected 1 logical drives
> > scsi0 : Adaptec AHA274x/284x/294
> megaraid: v107 (December 22, 1999)
> megaraid: found 0x8086:0x1960:idx 0:bus 0:slot 10:func 1
> scsi1 : Found a MegaRAID controller at 0xd0002000, IRQ: 12
> megaraid: [GH6D:1.43] detected 1 logical drives
> scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.25/3.2.4
>
> scsi1
At 12:26 AM 2/24/00 -0800, Mike Smith wrote:
>> OK, on the PERC2/SC and LINUX with the firmware from Dell (3.00), it pukes
>> with Redhat LINUX. I am able to talk to the card, fdisk and newfs it, but
>> it crashes hard when you write to the partition. I am going to try and
>> reflash the card
At 12:26 AM 2/24/2000 -0800, Mike Smith wrote:
> > OK, on the PERC2/SC and LINUX with the firmware from Dell (3.00), it pukes
> > with Redhat LINUX. I am able to talk to the card, fdisk and newfs it, but
> > it crashes hard when you write to the partition. I am going to try and
> > reflash the c
> > > >Hmm. I did some testing, and I can lock both the G6HC and G6HD firmware
> > > >up within a few minutes. The Dell 3.00 firmware remains stable under the
> > > >same load (20 simultaneous 'bonnie -s 100's). I'm fairly sure it's a
> > > >firmware lockup - the SCSI bus is hung and usually th
At 09:19 PM 2/22/2000 -0800, Mike Smith wrote:
> > On 18 Feb 2000 17:39:19 -0500, in sentex.lists.freebsd.current you wrote:
> > >
> > >Hmm. I did some testing, and I can lock both the G6HC and G6HD firmware
> > >up within a few minutes. The Dell 3.00 firmware remains stable under the
> > >same
> On 18 Feb 2000 17:39:19 -0500, in sentex.lists.freebsd.current you wrote:
> >
> >Hmm. I did some testing, and I can lock both the G6HC and G6HD firmware
> >up within a few minutes. The Dell 3.00 firmware remains stable under the
> >same load (20 simultaneous 'bonnie -s 100's). I'm fairly su
On 18 Feb 2000 17:39:19 -0500, in sentex.lists.freebsd.current you wrote:
>
>Hmm. I did some testing, and I can lock both the G6HC and G6HD firmware
>up within a few minutes. The Dell 3.00 firmware remains stable under the
>same load (20 simultaneous 'bonnie -s 100's). I'm fairly sure it's a
> OK, I took a chance and flashed the card's BIOS to the latest from the AMI
> site I had been suspecting BIOS, as the readme.txt mentioned problems
> with newer motherboards. Lo and Behold, it seems to have done the trick
>
> amr0: mem 0xe900-0xe93f irq 11 at device 12.1 on pci0
>
At 07:04 PM 2/16/00 -0800, Mike Smith wrote:
>> At 05:15 PM 2/16/2000 -0800, Mike Smith wrote:
>> > > Hi,
>> > > I have been trying to get a PERC 2 (aka MegaRAID 466) working
with
>> > > Current. The box worked fine with the 428, but seems to barf with
only the
>> > > controller swapped.
>>
At 07:04 PM 2/16/2000 -0800, Mike Smith wrote:
> > newmail# dd if=/dev/zero of=/dev/amrd0 count=16
> > 16+0 records in
> > 16+0 records out
> > 8192 bytes transferred in 0.006427 secs (1274613 bytes/sec)
> > newmail# disklabel -Brw amrd0 auto
> > newmail# disklabel -e amrd0
> > disklabel: ioctl DI
> At 05:15 PM 2/16/2000 -0800, Mike Smith wrote:
> > > Hi,
> > > I have been trying to get a PERC 2 (aka MegaRAID 466) working with
> > > Current. The box worked fine with the 428, but seems to barf with only the
> > > controller swapped.
> >
> >I don't think the two controllers share on-di
At 05:15 PM 2/16/2000 -0800, Mike Smith wrote:
> > Hi,
> > I have been trying to get a PERC 2 (aka MegaRAID 466) working with
> > Current. The box worked fine with the 428, but seems to barf with only the
> > controller swapped.
>
>I don't think the two controllers share on-disk configurati
> Hi,
> I have been trying to get a PERC 2 (aka MegaRAID 466) working with
> Current. The box worked fine with the 428, but seems to barf with only the
> controller swapped.
I don't think the two controllers share on-disk configuration formats;
you'll probably need to re-initialise the ar
Hi,
I have been trying to get a PERC 2 (aka MegaRAID 466) working with
Current. The box worked fine with the 428, but seems to barf with only the
controller swapped.
newmail# dd if=/dev/zero of=/dev/ramrd0 bs=1k count=1
1+0 records in
1+0 records out
1024 bytes transferred in 0.000446 se
15 matches
Mail list logo
