:~# /usr/local/sbin/flashrom -p ch341a_spi -w
/home//SMT_X10IPMI_400_REDFISH.bin
flashrom 1.4.0-devel (git:v1.2-1414-g2a5d2920) on Linux 5.15.0-102-generic
(x86_64)
flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, reso
On Sat, 02 Mar 2013 03:58:14 +0400
Александр Владимирович wrote:
> Reading firmware is successful, but writing is failed. Dual BIOS save
> motherboard in working state.
Writing the backup image back would have solved the problem too.
The problem is that Macronix shipped chips with the same ID bu
Reading firmware is successful, but writing is failed. Dual BIOS save
motherboard in working state.
flashrom v0.9.6.1-r1564 on Linux 3.4.24-std320-amd64 (x86_64)
flashrom was built with libpci 3.1.10, GCC 4.4.7, little endian
Command line (7 args): flashrom --verbose --programmer internal --read /m
On Thu, 14 Feb 2013 21:26:47 +0400
Александр Владимирович wrote:
> Logs for ASRock G31M-S rev 2.0, Gigabyte GA-H77M-D3H rev. 1.1
Hello Владимирович,
thanks for your report!
I have added the boards to our list of supported hardware and will
commit that later together with other small changes.
-
On Fri, 18 Jan 2013 13:32:46 +0400
user wrote:
>
> Logs for Asus P5KPL-AM IN/GB.
Hello,
thanks for your report!
I have added your board to our list of supported hardware and will
commit that later together with other small changes.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
Logs for Asus P5KPL-AM IN/GB.
flashrom v0.9.6.1-r1564 on Linux 3.6.6-alt311-amd64 (x86_64)
flashrom was built with libpci 3.1.10, GCC 4.4.7, little endian
Command line (7 args): flashrom --verbose --programmer internal --write /mnt/backup/sys/tmp/P5KPL-AM-IN-0507.ROM -o /mnt/backup/sys/tmp/asus-p5
On Mon, 31 Dec 2012 04:40:08 +0400
user wrote:
> Logs for Asus P5B-VM.
Hello,
thanks for your report!
I have added your board to our list of supported hardware and will
commit that later together with other small changes.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
___
[Forwarding answer to mailing list]
> Hi,
>
> xvilka had asked me to provide these logs, I believe they were all done
> in
> identify and read.
>
> Mike
OK, thanks. If you want to try a write operation on this board (and if
you have a way to recover in case it goes wrong) please let us know if