2017-10-04 14:04 GMT+02:00 wm4 :
> if you care about what gets merged, discuss it with the
> original author on the libav-devel mailing list before it
> gets committed.
You do realize that you are asking for something that
is not possible - did you forget?
Carl Eugen
2017-10-04 10:54 GMT+02:00 Tobias Rapp :
> On 27.09.2017 17:20, Carl Eugen Hoyos wrote:
>>
>> 2017-09-27 15:30 GMT+02:00 Tobias Rapp :
>>>
>>> Metadata filter output is passed through an Awk script comparing floats
>>
>>
>> Is awk needed on the host or the target system?
>
>
> Awk is started by fat
On 10/5/17, Lukas Stabe wrote:
> These changes store id3 chapter data in ID3v2ExtraMeta and introduce
> ff_id3v2_parse_chapters to parse them into the format context if needed.
>
> Encoders using ff_id3v2_read, which previously parsed chapters into the
> format context automatically, were adjusted
2017-09-28 11:14 GMT+02:00 Tom Butterworth :
> On Wed, 27 Sep 2017 at 16:52 Carl Eugen Hoyos wrote:
>> As long as FFmpeg does not have a native alpha-only
>> pix_fmt (I am not sure this would have any user-visible
>> advantage), single-layer 8bit formats should be decoded
>> as gray8.
>
> This wo
2017-09-29 11:03 GMT+02:00 Martin Vignali :
> 2017-09-28 23:24 GMT+02:00 Carl Eugen Hoyos :
>
>> 2017-09-28 21:50 GMT+02:00 Martin Vignali :
>>
>> > After comments about the previous patchs
>>
>> Please explain how this encoder and decoder can be used
>> from the FFmpeg cli: What kind of input coul
From: Kaustubh Raste
Signed-off-by: Kaustubh Raste
---
libavcodec/mips/h264qpel_msa.c | 746
libavcodec/mips/hevc_mc_uniw_msa.c | 67
libavcodec/mips/hevcdsp_msa.c | 50 ---
3 files changed, 863 deletions(-)
diff --git a/libavcodec/mips/h
On 05.10.2017 00:05, Michael Niedermayer wrote:
On Wed, Oct 04, 2017 at 10:33:11AM +0200, Tobias Rapp wrote:
On 30.09.2017 02:48, Michael Niedermayer wrote:
On Fri, Sep 29, 2017 at 05:08:16PM +0200, Tobias Rapp wrote:
Signed-off-by: Tobias Rapp
---
libavformat/wavenc.c | 5 -
t
> On 5. Oct 2017, at 09:08, Paul B Mahol wrote:
>
> On 10/5/17, Lukas Stabe wrote:
>> These changes store id3 chapter data in ID3v2ExtraMeta and introduce
>> ff_id3v2_parse_chapters to parse them into the format context if needed.
>>
>> Encoders using ff_id3v2_read, which previously parsed cha
On 30.09.2017 02:44, Michael Niedermayer wrote:
On Fri, Sep 29, 2017 at 05:08:15PM +0200, Tobias Rapp wrote:
Signed-off-by: Tobias Rapp
---
libavformat/wavenc.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
LGTM
Pushed, thanks for review.
Regards,
Tobias
___
On Thu, 5 Oct 2017 09:02:10 +0200
Carl Eugen Hoyos wrote:
> 2017-10-04 14:04 GMT+02:00 wm4 :
>
> > if you care about what gets merged, discuss it with the
> > original author on the libav-devel mailing list before it
> > gets committed.
>
> You do realize that you are asking for something tha
protocol requires libsrt (https://github.com/Haivision/srt) to be
installed
Signed-off-by: Nablet Developer
---
configure |5 +
libavformat/Makefile|1 +
libavformat/protocols.c |1 +
libavformat/srt.c | 1105 +++
li
LGTM
-Original Message-
From: ffmpeg-devel [mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of
kaustubh.ra...@imgtec.com
Sent: Thursday, October 5, 2017 1:15 PM
To: ffmpeg-devel@ffmpeg.org
Cc: Kaustubh Raste
Subject: [FFmpeg-devel] [PATCH] avcodec/mips: Cleanup unused functions
From: K
2017-10-05 10:25 GMT+02:00 Nablet Developer :
> protocol requires libsrt (https://github.com/Haivision/srt) to be
> installed
> + --enable-libsrt enable libsrt [autodetect]
Given that there is a libsrt that you don't meant, I don't
think this is the right name for the option:
I suggest
On 04.10.2017 23:27, Michael Niedermayer wrote:
On Mon, Sep 25, 2017 at 01:31:18PM +0200, Tobias Rapp wrote:
Align order of "start_time" option within filter documentation to actual
implementation and add missing AV_OPT_FLAG_FILTERING_PARAM flag. Fix
indent of "round" named constants and clear u
On Thu, 5 Oct 2017 03:34:19 +0200
Lukas Stabe wrote:
> These changes store id3 chapter data in ID3v2ExtraMeta and introduce
> ff_id3v2_parse_chapters to parse them into the format context if needed.
>
> Encoders using ff_id3v2_read, which previously parsed chapters into the
> format context a
> On 5. Oct 2017, at 10:51, wm4 wrote:
>
> On Thu, 5 Oct 2017 03:34:19 +0200
> Lukas Stabe wrote:
>
>> These changes store id3 chapter data in ID3v2ExtraMeta and introduce
>> ff_id3v2_parse_chapters to parse them into the format context if needed.
>>
>> Encoders using ff_id3v2_read, which pr
Le quartidi 14 vendémiaire, an CCXXVI, Nablet Developer a écrit :
> protocol requires libsrt (https://github.com/Haivision/srt) to be
> installed
>
> Signed-off-by: Nablet Developer
> ---
> configure |5 +
> libavformat/Makefile|1 +
> libavformat/protocols.c |1 +
> SRT is a subtitle format: a more specific name would be better.
for example? haivision_srt?
___
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
Am 02.10.2017 um 18:34 schrieb Marton Balint:
> Yeah, you can capture both at the same time, and one signal might be
> key, other might be fill, but as far as I know the driver will not
> merge these two signals behind the scenes to one single input with an
> alpha channel.
Is there a video filt
There is still a StartCom certificate in place, which is refused from
Chrome and soon other browsers.
Any help appreciated to also move that machine to Let's Encrypt?
Matthias
___
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
http://ffmpeg.org/mail
On Wed, 4 Oct 2017 15:03:34 -0700
Aman Gupta wrote:
> From: Aman Gupta
>
> This teaches the HLS demuxer to use the HTTP protocols
> multiple_requests=1 option, to take advantage of "Connection:
> Keep-Alive" when downloading playlists and segments from the HLS server.
>
> With the new option,
From: Michael Bradshaw
Signed-off-by: Michael Bradshaw
---
configure | 5 -
libavcodec/libopenjpegdec.c | 8 +---
libavcodec/libopenjpegenc.c | 10 ++
3 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/configure b/configure
index 391c141e7a..77c9
From: Michael Bradshaw
This adds support for OpenJPEG 2.3.0, which was just released and contains many
security-related fixes.
Michael Bradshaw (1):
lavc: add support for OpenJPEG 2.3.0
configure | 5 -
libavcodec/libopenjpegdec.c | 8 +---
libavcodec/libopenjpeg
On Wed, Oct 04, 2017 at 15:03:34 -0700, Aman Gupta wrote:
> From: Aman Gupta
>
> This teaches the HLS demuxer to use the HTTP protocols
> multiple_requests=1 option, to take advantage of "Connection:
> Keep-Alive" when downloading playlists and segments from the HLS server.
Nice.
Quick test: A
Time to time some devices send UDP packets without payload.
ffmpeg previously exited on receiving such packet, this patch
adds an option to ignore such packets.
Signed-off-by: Daniel Kucera
---
libavformat/udp.c | 12 +++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/lib
On 10/5/2017 3:10 AM, Clément Bœsch wrote:
> On Thu, Oct 05, 2017 at 12:55:19AM -0300, James Almer wrote:
>> Split it off from install-data.
>>
>> Among other things, this prevents spamming triplicate log lines during
>> install.
>>
>> Signed-off-by: James Almer
>> ---
>> Updated to apply after a
On Thu, Oct 05, 2017 at 13:41:07 +0200, wm4 wrote:
> I don't really see where this patch checks whether the host changes?
> The minimal requirements for reusing the connection would be using
> the same protocol and the same host.
I *believe* it just tries to reuse the connection and falls back to
On Thu, 5 Oct 2017 16:39:25 +0200
Moritz Barsnick wrote:
> On Thu, Oct 05, 2017 at 13:41:07 +0200, wm4 wrote:
> > I don't really see where this patch checks whether the host changes?
> > The minimal requirements for reusing the connection would be using
> > the same protocol and the same host.
On Tue, Oct 3, 2017 at 4:02 AM, Carl Eugen Hoyos wrote:
> 2017-10-03 1:52 GMT+02:00 Bjorn Roche :
>
> > Attached is a patch for paletteuse only.
>
> I tested the following with and without your patch:
> $ ffmpeg -i fate-suite/lena.pnm -vf palettegen pal.png
> $ ffmpeg -i fate-suite/lena.pnm -i pa
Hello,
In attach patchs to add a dedicated func for clear_block inside
prores decoding (proresdec2)
currently slice decode func use a loop and call the blockdsp.clear_block
func
After some test, it seems to be slower, than memset (for me)
I check using this "fake" func in the blockdsp
static voi
On Thu, 5 Oct 2017 03:34:19 +0200
Lukas Stabe wrote:
> These changes store id3 chapter data in ID3v2ExtraMeta and introduce
> ff_id3v2_parse_chapters to parse them into the format context if needed.
>
> Encoders using ff_id3v2_read, which previously parsed chapters into the
> format context a
On Wed, Oct 4, 2017 at 2:50 AM, Clément Bœsch wrote:
> On Mon, Oct 02, 2017 at 01:24:32PM -0400, Bjorn Roche wrote:
> [...]
> > Bjorn Roche (7):
> > First pass at fixing paletteuse
> > Fix for dithering.
> > Removing some debugging
> > First pass at making the gif support transparency wit
On Thu, Oct 5, 2017 at 4:58 PM, Martin Vignali wrote:
> Hello,
>
> In attach patchs to add a dedicated func for clear_block inside
> prores decoding (proresdec2)
>
> currently slice decode func use a loop and call the blockdsp.clear_block
> func
>
> After some test, it seems to be slower, than mem
I have attempted to post my first patch suggestion per
https://trac.ffmpeg.org/ticket/6719#comment:1
If I have done something wrong, please feel free to say so (and how to fix it,
if possible).
Openjpeg git at https://github.com/uclouvain/openjpeg is up from v2.2 to v2.3,
which means that ffm
On 10/04/2017 03:21 PM, Michael Niedermayer wrote:
> On Wed, Oct 04, 2017 at 10:58:19AM -0700, John Stebbins wrote:
>> On 10/04/2017 10:13 AM, Michael Niedermayer wrote:
>>> On Wed, Oct 04, 2017 at 08:18:59AM -0700, John Stebbins wrote:
On 10/04/2017 03:50 AM, Michael Niedermayer wrote:
>
On Wed, Oct 04, 2017 at 02:04:54PM +0200, wm4 wrote:
> On Wed, 4 Oct 2017 13:37:31 +0200
> Tobias Rapp wrote:
>
> > On 04.10.2017 11:34, wm4 wrote:
> > > On Wed, 4 Oct 2017 11:22:37 +0200
> > > Michael Niedermayer wrote:
> > >
> > >> On Wed, Oct 04, 2017 at 09:12:29AM +0200, wm4 wrote:
> >
2017-10-05 18:04 GMT+02:00 Hendrik Leppkes :
> On Thu, Oct 5, 2017 at 4:58 PM, Martin Vignali
> wrote:
> > Hello,
> >
> > In attach patchs to add a dedicated func for clear_block inside
> > prores decoding (proresdec2)
> >
> > currently slice decode func use a loop and call the blockdsp.clear_blo
On 10/5/2017 10:45 AM, Michael Bradshaw wrote:
> From: Michael Bradshaw
>
> Signed-off-by: Michael Bradshaw
> ---
> configure | 5 -
> libavcodec/libopenjpegdec.c | 8 +---
> libavcodec/libopenjpegenc.c | 10 ++
> 3 files changed, 15 insertions(+), 8 deletion
29.09.2017 0:20, Carl Eugen Hoyos пише:
Hi!
I don't have decklink hardware but I assume it never outputs actual
transparency.
Or does it?
it outputs or use internal keyer to put it over passthrow SDI signal.
in external keyer mode it accept BGRA frame and output two SDI signals:
one for *fil
On Thu, Oct 05, 2017 at 10:43:04AM -0400, Bjorn Roche wrote:
> On Tue, Oct 3, 2017 at 4:02 AM, Carl Eugen Hoyos wrote:
>
> > 2017-10-03 1:52 GMT+02:00 Bjorn Roche :
> >
> > > Attached is a patch for paletteuse only.
> >
> > I tested the following with and without your patch:
> > $ ffmpeg -i fate-
Hello Marton,
Thanks for taking the time to provide feedback.
>> + } else {
>> +*buffer = (void *)(_avpacket->data);
>
> The DeckLink SDK requires a 128 byte alignment for data. I am thinking
> AVPacket does not always provides that. Maybe we should simply ignore the SDK
> req
On Thu, 5 Oct 2017 18:47:01 +0200
Michael Niedermayer wrote:
> On Wed, Oct 04, 2017 at 02:04:54PM +0200, wm4 wrote:
> > On Wed, 4 Oct 2017 13:37:31 +0200
> > Tobias Rapp wrote:
> >
> > > On 04.10.2017 11:34, wm4 wrote:
> > > > On Wed, 4 Oct 2017 11:22:37 +0200
> > > > Michael Niedermayer w
Add support for enumerating the sources/sinks via the ffmpeg
command line options, as opposed to having to create a real pipeline
and use the "-list_devices" option which does exit() after dumping
out the options.
Note that this patch preserves the existing "-list_devices" option,
but now shares c
Can be tested via the following command:
./ffmpeg -i foo.ts -f decklink -vcodec v210 'DeckLink Duo (1)'
Note that the 8-bit support works as it did before, and setting
the pix_fmt isn't required for 10-bit mode. The code defaults to
operating in 8-bit mode when no vcodec is specified, for backwa
Hello all,
Below please find several patches which adds support for 10-bit video
on output and the "-sources" and"-sinks" argument when specified by ffmpeg.c.
This patch series incorporates feedback provided from Marton Balint.
Note that patch 4 in the previous patch series was consolidated into
2017-10-05 16:43 GMT+02:00 Bjorn Roche :
> On Tue, Oct 3, 2017 at 4:02 AM, Carl Eugen Hoyos wrote:
>
>> 2017-10-03 1:52 GMT+02:00 Bjorn Roche :
>>
>> > Attached is a patch for paletteuse only.
>>
>> I tested the following with and without your patch:
>> $ ffmpeg -i fate-suite/lena.pnm -vf paletteg
2017-10-05 21:22 GMT+02:00 wm4 :
>> And this is just one example ...
>
> Your one example was invalid, next one please.
One example is more than enough, we can all see that this
is not clean new code.
What is wrong about adding a new field if you really need it?
Carl Eugen
_
On 05/10/17 17:47, Michael Niedermayer wrote:
> On Wed, Oct 04, 2017 at 02:04:54PM +0200, wm4 wrote:
>> On Wed, 4 Oct 2017 13:37:31 +0200
>> Tobias Rapp wrote:
>>
>>> On 04.10.2017 11:34, wm4 wrote:
On Wed, 4 Oct 2017 11:22:37 +0200
Michael Niedermayer wrote:
> On Wed, Oct 0
2017-10-05 16:26 GMT+02:00 Daniel Kucera :
> Time to time some devices send UDP packets without payload.
> ffmpeg previously exited on receiving such packet
Just curious: Is it useful at all to exit on an empty packet?
Carl Eugen
___
ffmpeg-devel mailin
2017-10-05 16:32 GMT+02:00 Moritz Barsnick :
> Issue: The hls demuxer now inconsistently no longer reports
> each opened URL, only the first one. (Reporting of these at
> default log-level was only recently added though.)
Could you remind me why this was useful?
I was about to start a patch to st
2017-10-05 17:13 GMT+02:00 wm4 :
> Pushed, with commit message adjusted to 72 columns limit.
You forgot to add the ticket number.
Carl Eugen
___
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
On Thu, 5 Oct 2017 22:01:56 +0200
Carl Eugen Hoyos wrote:
> 2017-10-05 21:22 GMT+02:00 wm4 :
>
> >> And this is just one example ...
> >
> > Your one example was invalid, next one please.
>
> One example is more than enough, we can all see that this
> is not clean new code.
But I showed th
On 10/05/2017 09:45 AM, John Stebbins wrote:
> On 10/04/2017 03:21 PM, Michael Niedermayer wrote:
>> On Wed, Oct 04, 2017 at 10:58:19AM -0700, John Stebbins wrote:
>>> On 10/04/2017 10:13 AM, Michael Niedermayer wrote:
On Wed, Oct 04, 2017 at 08:18:59AM -0700, John Stebbins wrote:
> On 10/
On Thu, Oct 05, 2017 at 09:03:40PM +0100, Mark Thompson wrote:
> On 05/10/17 17:47, Michael Niedermayer wrote:
> > On Wed, Oct 04, 2017 at 02:04:54PM +0200, wm4 wrote:
> >> On Wed, 4 Oct 2017 13:37:31 +0200
> >> Tobias Rapp wrote:
> >>
> >>> On 04.10.2017 11:34, wm4 wrote:
> On Wed, 4 Oct 201
Dňa 5. 10. 2017 10:19 odpoludnia používateľ "Carl Eugen Hoyos" <
ceffm...@gmail.com> napísal:
2017-10-05 16:26 GMT+02:00 Daniel Kucera :
> Time to time some devices send UDP packets without payload.
> ffmpeg previously exited on receiving such packet
Just curious: Is it useful at all to exit on a
On Thu, Oct 5, 2017 at 10:21 PM, Carl Eugen Hoyos wrote:
> 2017-10-05 16:32 GMT+02:00 Moritz Barsnick :
>
>> Issue: The hls demuxer now inconsistently no longer reports
>> each opened URL, only the first one. (Reporting of these at
>> default log-level was only recently added though.)
>
> Could yo
2017-10-06 0:19 GMT+02:00 Hendrik Leppkes :
> On Thu, Oct 5, 2017 at 10:21 PM, Carl Eugen Hoyos wrote:
>> 2017-10-05 16:32 GMT+02:00 Moritz Barsnick :
>>
>>> Issue: The hls demuxer now inconsistently no longer reports
>>> each opened URL, only the first one. (Reporting of these at
>>> default log-
Here are samples of many stream configurations, generated with Microsoft's
encoder:
https://mega.nz/#!aQRUnTIT!gWUAfGNLIP62VKV2JEOGoyQ1jbVc3M7_qu7ChXQwb7w
For real XMA used in games, I've only seen 2ch+..+2ch+1/2ch (usual, what
FFmpeg supported before) and 1ch+..+1ch (rare, what motivates this pat
On 05/10/17 23:01, Michael Niedermayer wrote:
> On Thu, Oct 05, 2017 at 09:03:40PM +0100, Mark Thompson wrote:
>> On 05/10/17 17:47, Michael Niedermayer wrote:
>>> On Wed, Oct 04, 2017 at 02:04:54PM +0200, wm4 wrote:
On Wed, 4 Oct 2017 13:37:31 +0200
Tobias Rapp wrote:
> On 04.1
On Wed, Oct 04, 2017 at 02:20:07AM +, James Almer wrote:
> ffmpeg | branch: master | James Almer | Tue Oct 3
> 23:08:06 2017 -0300| [1e7b6e47d2752a91bcd6d0c91ed2aaf118eaeee9] | committer:
> James Almer
>
> Merge commit '79331df362fb05a0d04ca9489c87e5b80077a3f4'
>
> * commit '79331df362fb0
2017-10-05 21:44 GMT+02:00 Carl Eugen Hoyos :
> I tested the following with the sample from ticket #503:
> $ ffmpeg -i rgba64le-lzw.tif -vf palettegen pal.png
> $ ffmpeg -i rgba64le-lzw.tif -i pal.png -lavfi paletteuse out.gif
>
> The output file has its background (that is supposed to be
> transp
On Thu, Oct 05, 2017 at 22:21:09 +0200, Carl Eugen Hoyos wrote:
> Could you remind me why this was useful?
It never was to me. (Except at loglevel debug and above.)
Moritz
___
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
http://ffmpeg.org/mailman/l
On 05/10/17 23:59, Mark Thompson wrote:
> On 05/10/17 23:01, Michael Niedermayer wrote:
>> On Thu, Oct 05, 2017 at 09:03:40PM +0100, Mark Thompson wrote:
>>> On 05/10/17 17:47, Michael Niedermayer wrote:
On Wed, Oct 04, 2017 at 02:04:54PM +0200, wm4 wrote:
> On Wed, 4 Oct 2017 13:37:31 +02
On Fri, 6 Oct 2017 00:01:30 +0200
Michael Niedermayer wrote:
> The opaque_ref wraping is a really bad design. Iam not sure why
> people defend it.
FFmpeg is full of this design. There are plenty of structs with
opaque/priv fields that change meaning depending on the context
(basically how the st
On Fri, 6 Oct 2017 00:19:33 +0200
Hendrik Leppkes wrote:
> On Thu, Oct 5, 2017 at 10:21 PM, Carl Eugen Hoyos wrote:
> > 2017-10-05 16:32 GMT+02:00 Moritz Barsnick :
> >
> >> Issue: The hls demuxer now inconsistently no longer reports
> >> each opened URL, only the first one. (Reporting of thes
On Sat, Sep 30, 2017 at 03:51:41PM +, Ashish Singh wrote:
> ffmpeg | branch: master | Ashish Singh | Sat Sep 16
> 02:35:58 2017 +0530| [148c8e88c43cfbabd6aee9f01ef30942cee9d359] | committer:
> Ronald S. Bultje
>
> avfilter: add vmafmotion filter
>
> Signed-off-by: Ashish Singh
> Signed-of
On Wed, Oct 04, 2017 at 03:03:33PM -0700, Aman Gupta wrote:
> From: Aman Gupta
>
> ---
> libavformat/http.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/libavformat/http.c b/libavformat/http.c
> index 6af3259a43..f76a71fbb7 100644
> --- a/libavformat/http.c
> +++ b/l
On 10/5/2017 8:10 PM, Michael Niedermayer wrote:
> On Wed, Oct 04, 2017 at 02:20:07AM +, James Almer wrote:
>> ffmpeg | branch: master | James Almer | Tue Oct 3
>> 23:08:06 2017 -0300| [1e7b6e47d2752a91bcd6d0c91ed2aaf118eaeee9] | committer:
>> James Almer
>>
>> Merge commit '79331df362fb05a
On Thu, Oct 05, 2017 at 08:31:39AM +0200, Carl Eugen Hoyos wrote:
> Hi!
>
> Attached patch fixes ticket #6717.
>
> Please comment, Carl Eugen
> h264_cabac.c |2 +-
> h264_mb.c|2 +-
> h264_slice.c |2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
> 9e712a4dbc032aa844d869
On Thu, Oct 05, 2017 at 08:34:00AM +, Manojkumar Bhosale wrote:
> LGTM
applied
thx
[...]
--
Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB
Frequently ignored answer#1 FFmpeg bugs should be sent to our bugtracker. User
questions about the command line tools should b
Signed-off-by: Sasi Inguva
---
libavfilter/avfilter.c | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/libavfilter/avfilter.c b/libavfilter/avfilter.c
index 58917ed445..ec7dfc0bd3 100644
--- a/libavfilter/avfilter.c
+++ b/libavfilter/avfilter.c
@@ -427,19 +427,
On Thu, Oct 05, 2017 at 09:15:13PM -0300, James Almer wrote:
> On 10/5/2017 8:10 PM, Michael Niedermayer wrote:
> > On Wed, Oct 04, 2017 at 02:20:07AM +, James Almer wrote:
> >> ffmpeg | branch: master | James Almer | Tue Oct 3
> >> 23:08:06 2017 -0300| [1e7b6e47d2752a91bcd6d0c91ed2aaf118eae
I've encountered the same problem, and tracked it to guess_status_pts
function which tries to take the end timestamp from the input links
however without converting it to correct time base. Sent a patch, PTAL.
On Tue, Oct 3, 2017 at 5:36 PM, Thomas Mundt wrote:
> Hi Nicolas,
>
> 2017-09-07 10:59
On 10/5/2017 11:59 PM, Michael Niedermayer wrote:
> On Thu, Oct 05, 2017 at 09:15:13PM -0300, James Almer wrote:
>> On 10/5/2017 8:10 PM, Michael Niedermayer wrote:
>>> On Wed, Oct 04, 2017 at 02:20:07AM +, James Almer wrote:
ffmpeg | branch: master | James Almer | Tue Oct 3
23:08:
> SRT is a subtitle format: a more specific name would be better.
Haivision suggested name "opensrt" - is it acceptable to distinguish
with SRT subtitile format?
if yes, I'll go ahead and submit new patch with name changed.
___
ffmpeg-devel mailing lis
75 matches
Mail list logo
