fre 2023-04-14 klockan 06:34 -0500 skrev Stuart Stevenson:
> I use 3 degrees when I ramp even when spiral plunging.
Tried 5 degrees and now it works well.
>
> On Fri, Apr 14, 2023 at 6:12 AM andy pugh wrote:
>
> > On Fri, 14 Apr 2023 at 10:29, Nicklas SB Karlsson
> > wrote:
> >
> > >
> > >
mdunn.com]
> Sent: April 14, 2023 6:52 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Mill ramp angle
>
> I've had great success with 1/4" O-flutes in aluminum. But I spiral those
> in pretty much exclusively and use HSM style tool paths where
What is an O-Flutes cutter?
-Original Message-
From: Todd Zuercher [mailto:to...@pgrahamdunn.com]
Sent: April 14, 2023 6:52 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Mill ramp angle
I've had great success with 1/4" O-flutes in aluminum. But I spira
fre 2023-04-14 klockan 14:03 +0100 skrev Rob C:
> what is the material?
Some kind of ordinary steel.
> what is the endmill material?
HSS
> how many flutes?
4 flutes.
> is it centre cutting tool or non-center cutting end mill?
It is not center cutting flute os it might happen angle is to steep
ev
eaking.)
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Rob C
Sent: Friday, April 14, 2023 9:04 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Mill ramp angle
[EXTERNAL EMAIL] Be sure links are sa
Subject: Re: [Emc-users] Mill ramp angle
[EXTERNAL EMAIL] Be sure links are safe.
fre 2023-04-14 klockan 12:07 +0100 skrev andy pugh:
> On Fri, 14 Apr 2023 at 10:29, Nicklas SB Karlsson wrote:
>
> >
> > Anyone have any suggestion about this? Decrease ramp angle?
> >
>
&g
what is the material?
what is the endmill material?
how many flutes?
is it centre cutting tool or non-center cutting end mill?
I have always struggled on o-flute endmills and ramp or plunge (breaking
the tip :(
https://zero-divide.net/?&article_id=4307_plunging-and-ramping-recomendations-and-tech
fre 2023-04-14 klockan 12:07 +0100 skrev andy pugh:
> On Fri, 14 Apr 2023 at 10:29, Nicklas SB Karlsson wrote:
>
> >
> > Anyone have any suggestion about this? Decrease ramp angle?
> >
>
> Can you spiral down, making a hole slightly less than twice the tool
> diameter, so that only one side of
I use 3 degrees when I ramp even when spiral plunging.
On Fri, Apr 14, 2023 at 6:12 AM andy pugh wrote:
> On Fri, 14 Apr 2023 at 10:29, Nicklas SB Karlsson wrote:
>
> >
> > Anyone have any suggestion about this? Decrease ramp angle?
> >
>
> Can you spiral down, making a hole slightly less than
On Fri, 14 Apr 2023 at 10:29, Nicklas SB Karlsson wrote:
>
> Anyone have any suggestion about this? Decrease ramp angle?
>
Can you spiral down, making a hole slightly less than twice the tool
diameter, so that only one side of the tool is engaged?
--
atp
"A motorcycle is a bicycle with a pande
Have some problem then mill enter material ramping down it wobble and
torque increase. Diameter is 12mm and ramp angle is 10 degree.
Anyone have any suggestion about this? Decrease ramp angle?
Decrease feed during ramping?
Nicklas Karlsson
___
Emc-u
11 matches
Mail list logo
