Great !
Many thanks to everybody, there is a lot of great ideas I will explore soon !
(I have to finish the hardware first... Just operating the steppers with no
machine to move is not really useful :/ )
- "Matthew Ireland" a écrit :
> >
> > As the moves I need to do are very simples,
>
> As the moves I need to do are very simples, (just drawing a square with the
> glue, in fact), I think learning moves like this will be far more easy than
> creating Gcode.
Dude, as a person who spent years writing gcode in a text editor, all I can
say is your program will be literally four g1
On Fri, 2009-09-04 at 11:45 -0700, Youda He wrote:
> I have hear but never really edit gcode, I noticed there are capital case
> and lower case letters, are they case sensitive?
>
> -- Youda
No
--
Let Crystal Reports
Letters in gcode are not case sensitive. When the standard was written,
lower case letters had not yet been invented. :-)
Ken
Youda He wrote:
> I have hear but never really edit gcode, I noticed there are capital case
> and lower case letters, are they case sensitive?
>
> -- Youda
>
> On Fri,
I have hear but never really edit gcode, I noticed there are capital case
and lower case letters, are they case sensitive?
-- Youda
On Fri, Sep 4, 2009 at 10:34 AM, Claude Froidevaux wrote:
> Le 04.09.2009 10:43, Yann Jautard a écrit :
> > Hi all,
> >
> > (sorry for my poor english, I'm from fra
Le 04.09.2009 10:43, Yann Jautard a écrit :
> Hi all,
>
> (sorry for my poor english, I'm from france)
>
> I'm doing a machine to apply glue for photovoltaics modules assembly.
>
> The goal is to apply a line of silicon glue around a metal frame, before
> assembly of the frame with the laminated p
Yann,
In addition to what Ray said, if you are up to writing a simple interface
you can use emcrsh described here:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Emcrsh
This is a simple telnet like text interface which can be used to query
machine information and issue commands. It can be run either
Hello Yann
Interesting project. I saw an early EMC powered pick-and-place machine
in Belgium back in the 1990s. No reason that EMC2 can't handle the
project easily.
I believe that the Axis interface may be overkill. It would be a fairly
easy write to create a frame in the Mini interface that
the machine will move in a straight line between the coordinates on one line
and the coordinates on the next line
for example:
if the program looks like this
X0 Y0 Z0
X1 Y1 Z1
the machine will move
from
X0 Y0 Z0
to
X1 Y1 Z1
in a straight line.
all you need to do is collect the end p
Hi all,
(sorry for my poor english, I'm from france)
I'm doing a machine to apply glue for photovoltaics modules assembly.
The goal is to apply a line of silicon glue around a metal frame, before
assembly of the frame with the laminated photovoltaic module, and then to make
a second pass to
10 matches
Mail list logo
