Without I3.00 make no difference.
Then there is G33.1 in the file error message "parse_file interp_error"
is shown and display is not updated.
Looking more closely at the bottom G-code is however actually loaded and
seems to execute correct including the G33.1 rigid tapping cycle even
though
The video says 1200 kg. So about 2600 lbs.
On 6/14/23 6:05 AM, Todd Zuercher wrote:
Think that is a solid chunk of steel mounted on that? If so about what would
it probably weigh?
Todd Zuerc
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original
Think that is a solid chunk of steel mounted on that? If so about what would
it probably weigh?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Thomas J Powderly
Sent: Wednesday, June 14, 2023 5:39 AM
To: emc
Could you try it without I3.000?
On Wed, Jun 14, 2023 at 2:31 PM John Dammeyer
wrote:
> Does your spindle have an encoder and the spindle at speed?
>
>
> https://forum.linuxcnc.org/38-general-linuxcnc-questions/43124-g33-1-rigid-tapping
>
>
> -Original Message-
> From: Nicklas SB Karlsso
Does your spindle have an encoder and the spindle at speed?
https://forum.linuxcnc.org/38-general-linuxcnc-questions/43124-g33-1-rigid-tapping
-Original Message-
From: Nicklas SB Karlsson [mailto:n...@nksb.eu]
Sent: June 14, 2023 12:14 PM
To: emc-users@lists.sourceforge.net
Subject: [Em
I put the lines below into a file:
M3 S100
G33.1 Z-30.474 K0.8 I3.000
M5
M2
Then I read into Linuxcnc I get error message:
parse_file interp_error
Removing the line with G33.1 then no error message so it is something
with this row. Program do however execute as expected with G33.1 l
OT but certainly an achievement
https://www.youtube.com/watch?v=4x1900_T4-M
they must have had the concrete barbers in to anchor it down
tomp
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/em
