Ken -
I can duplicate your problem on my Win10 Pro setup. Elecraft support is
supp...@elecraft.com.
73, Mike NF4L
> On Dec 7, 2015, at 9:05 AM, Kenneth Christiansen wrote:
>
> Hi to the group
>
> I was helping a friend get on PSK31 and discovered I have a problem with the
> Elecraft K3 Ut
OK, it's way too early to be at work.
73, Mike NF4L
> On Dec 7, 2015, at 10:11 AM, Dick Dievendorff wrote:
>
> I'm looking into it now.
>
> Dick, K6KR
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf
>> days.
>>
>> Not to toot our own horn, but outstanding job, sir!
>>
>> Jack, W6FB
>>
>>
>>> On Dec 7, 2015, at 7:33 AM, Mike Reublin NF4L wrote:
>>>
>>> OK, it's way too early to be at work.
>>>
>>>
Hi Juliean -
Welcome to the hobby. You're starting off with the best. Yes, you can use your
computer headset. The K3s has an 8-band equalizer for both receive and
transmit, so with a bit of tinkering, you can get excellent sound.
My headset came with 1/8 plugs for both mic and phones. I plug th
es. Using
> it makes it easy to switch to the internal speaker when you want to. (Just
> unplug the 1/4 inch adapter.)
>
> 73 Bill AE6JV
>
> On 12/18/15 at 1:02 PM, n...@comcast.net (Mike Reublin NF4L) wrote:
>
>> Hi Juliean -
>>
>> Welcome to the hobb
I got a new K3 feature for Christmas. Today just sitting here with the K3 on, I
heard some relay chatter and the rig turned off. I turned it back on, and after
about an hour, a repeat performance. I wasn't doing any transmitting.
73, Mike NF4L
__
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the Cal QSO Party 1-2 Oct 2016
> - www.cqp.org
>
> On 12/21/2015 10:48 AM, Mike Reublin NF4L wrote:
>> I got a new K3 feature for Christmas. Today just sitting here with
>> the K3 on, I heard some relay chatter an
tor, solar-powered receiver.
>
> You've been warned that the biggest threat to this country is global
> warm...sorry...climate change and you must do your part. So NSA and it's
> Chinese partners saw that you were only listening and shut you down.
>
>
> On 12/21/201
Maybe.
73, Mike NF4L
> On Dec 21, 2015, at 9:29 PM, Harry Yingst wrote:
>
> Did the power supply hiccup?
>
>
>
>
>
> From: Don Wilhelm
> To: Mike Reublin NF4L ; Elecraft List
>
> Sent: Monday, December 21, 2015 9:23 PM
> Subject: Re: [Elecraft
ear
73, Mike NF4L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support t
Eric.
73, Mike NF4L
> On Jan 4, 2016, at 4:47 PM, Barry N1EU wrote:
>
> Yes, but who ever said it was a DNS issue?
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.h
I'm using a Mac, iMic and fldigi V3.23.00. It appears everything is set
correctly, but I'm not making RF.
I can't set the ALC to 4 solid with the 5th bar flickering. The minimum number
of bars is a solid 5, the line in at that point is 4. It makes no difference if
the iMic is set to Line or Mic
Fred,
Give the techs at Elecraft a call. They're REAL good at diagnosing problems,
and suggesting fixes. If you don't feel comfortable doing the work, send it in.
73, Mike NF4L
> On Apr 8, 2016, at 6:44 PM, Fred Jensen wrote:
>
> My K3, S/N 642, has been slowly developing "front panel dementia"
I've written a settings saver for the K3. It should work on the K3S, but I
don't have one to test it on. The program reads every Menu and Config setting
that's readable, and stores it in a file. You can read a second radio and
compare the settings side-by-side. The program puts the radio into Te
Ron -
I don't use a desk mic, I prefer a headset, but pretty much any mic will sound
great because the K3 offers a lot of versatility in the TX equalizer and other
settings. I've seen posts about guys using $4.99 computer mics.
Spend your bux on antennas.
73, Mike NF4L
> On Apr 20, 2016, at
Andrew,
Are the settings in MENU:MIC SEL correct? To use the rear plug I have rP.L
biAS. That means rear panel, low gain and bias on. The bias setting will depend
on what type mic you're using, on for electrets.
How about mic gain?
73, Mike NF4L
> On Apr 30, 2016, at 6:09 PM, Andrew Hebden
Been chasing the same enhancement for a long time. I don't think it's gonna
happen. The workaround is that fldigi and Cocoamodem can key the rig. Dunno
about Win programs.
73, Mike NF4L
> On Aug 2, 2015, at 2:41 PM, Dan Atchison via Elecraft
> wrote:
>
> I'd like to use VOX on digital modes
ARRL affiliated insurance. Wouldn't be without it.
73, Mike NF4L
> On Aug 7, 2015, at 11:13 AM,
> wrote:
>
> I'm wondering with such a large investment in gear if anyone has special
> insurance just for their station? I'm pretty OCD about disconnecting my
> station when not in use (major pain
Well said!
73, Mike NF4L
> On Sep 9, 2015, at 5:32 PM, Guy Olinger K2AV wrote:
>
> On Wed, Sep 9, 2015 at 11:29 AM, K8TE wrote:
>>
>> In my case, the Mic gain is normally set to 8-9 (CM500 headset). The
>> anomaly decreases the Mic Gain to zero. I manually reset it to 8-9 which
>> restor
Bill -
There's always that really good version of Linux that makes it easier. OS X on
a Mac. . . . and run RUMLogNG.
73, Mike NF4L
> On Sep 11, 2015, at 3:36 PM, Bill wrote:
>
> I have gotten most everything moved from Windows over to Linux (Mint 17) -
> even a very good clone of Quicken. N
I can't imagine what makes it cost that much. Too rich for my anemic blood.
73, Mike NF4L
> On Sep 14, 2015, at 4:24 PM, Cliff Frescura wrote:
>
> Didn't ask. But the web site lists the SP3 at $179
__
Elecraft mailing list
Home: http
Not even at half that. Maybe it's a misplaced decimal punkt. . . . . .
73, Mike NF4L
> On Sep 14, 2015, at 7:24 PM, mfsj wrote:
>
> OMG OM cheap at twice the price 8>)
>
> Fred/N0AZZ
__
Elecraft mailing list
Home: http://mailman.qth
Unless there's a real space issue, forego the wheels ans just put the desk a
couple of feet from the wall. KISS
8-{o}.
73, Mike NF4L
> On Sep 16, 2015, at 1:15 PM, Jim Brown wrote:
>
> On Wed,9/16/2015 7:50 AM, Dennis wrote:
>> This desk will go in a room corner tight against the walls w
Ah yes. The lemming washers.
73, Mike NF4L
> On Sep 17, 2015, at 8:42 AM, Rick Robinson wrote:
>
> Also using a bath towel under your work helps grab those little parts that
> amazingly grow legs and wander or jump off.
__
Elecraft m
The filters you guys are discussing are roofing filters. The filtering you're
thinking about is done digitally, and is continuously variable. The K3s isn't
your Dad's analog rig.
Here's an Elecraft article explaining roofing filters.
http://www.elecraft.com/K3/Roofing_Filters.htm
73, Mike N
Jim -
The discussions are not a burden at all. I enjoy them immensely, and consider
them a valuable resource for my education. Please dont be annoyed.
73, Mike NF4L
> On Sep 28, 2015, at 12:37 PM, Jim Brown wrote:
>
> And this question remains. When I spend MONTHS writing a tutorial on stuff
Would anyone using a Mac, iMic and fldigi contact me off list?
73, Mike NF4L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
T
Do you have MENU:MIC+Lin ON?
73, Mike NF4L
> On Oct 20, 2015, at 4:20 PM, NE9U - Jasper wrote:
>
> i am trying to get sound card audio to feed my k3 for the ssb contest this
> weekend and also use my Heil headset.
>
> if i feed the line out from the computer to line in of k3, neither the fron
Please be aware that Murphy's Law was NOT written by Murphy, but by another guy
with the same name.
73, Mike NF4L
> On Nov 7, 2015, at 12:09 PM, Dauer, Edward wrote:
>
> Is it a necessary corollary of Murphy’s Law that a multi-band Vee that has
> been flying just fine for nearly three years
Span is set at 10. When chasing DX split, is it possible to position the VFO A
cursor at the left edge of the display and have the right 5 kHz expanded over
the (almost) full screen?
In trying to achieve this, I got it so that when in tracking mode the A VFO
moves the magenta cursor as well as
I can't think of a transceiver that doesn't have a grounding lug.
73, Mike NF4L
> On Nov 18, 2015, at 3:45 PM, Frank wrote:
>
> I am a firm believer in a good ground for ANY transceiver, but need advice:
> Where would be the best location (internal OR external ) to install a small
> bolt fo
rtion of the VFO A window puts
> the cursor where you want it.
>
> I have come to really miss that control screen if I happen to be using
> another Logging/Control program.
>
> Rick
> K6LE
>
> On Wed, Nov 18, 2015 at 12:36 PM, Mike Reublin NF4L
> wrote:
>
>&g
ontinue to do so.
>
> Alan
>
>
> On 11/18/2015 12:36 PM, Mike Reublin NF4L wrote:
>> Span is set at 10. When chasing DX split, is it possible to position
>> the VFO A cursor at the left edge of the display and have the right 5
>> kHz expanded over the (almost) ful
will stay put as long as you don't move VFO-A on the K3. The VFO-B (magenta)
> cursor (and the split red cursor) will move as you tune the VFO-B knob on
> the K3. If you also want to use the A and B markers they will follow the
> select knob on the P3.
>
> 73,
> Mike K2MK
&g
the A & B cursor and the marker and
changes the center freq. displayed on the screen. That isn't desirable.
I don't want to change the span, just the amount of real estate it covers.
73, Mike NF4L
> On Nov 19, 2015, at 2:00 PM, Alan wrote:
>
> Hi Mike,
>
> On
Over
73, Mike NF4L
> On Nov 20, 2015, at 7:35 AM, Mike Reublin NF4L wrote:
>
> I'm not doing a a good job of explaining I think.
>
> The rig is at 3.524. I double-tap the Split button to equalize the VFOs, then
> hold Split.
> The P3 is set to a span of 10, i
> On Nov 21, 2015, at 11:12 PM, Alan wrote:
>
>> What I'm looking for is that when I tune either the B VFO or the B
>> marker up band, it reaches the far right edge of the screen when I
>> get to 3.529, instead of reaching 3.529 when it gets just to the
>> right of the screen center.
>
> To d
I have WMR amplified speakers, and I get really bad sound if the volume is up
too far.
73, Mike NF4L
> On Nov 23, 2015, at 11:15 AM, Steve Ellington wrote:
>
> Am I missing something? Why would one want to use an amplified speaker on a
> K3 since the radio already has an amplifier? Doing so w
I'm writing a Windows program for the K3. It connects at 38400 only. In trying
to figure out what's wrong, I set my P3 and K3 to 9600 and used the K3 Utility.
It will not connect.
If I set the K3 to 38400 and leave the P3 at 9600, the utility connects, but
reports it's connected at 9600.
Puzzl
> LA7NO
>
>
> On 24 November 2015 at 13:54, Mike Reublin NF4L <mailto:n...@comcast.net>> wrote:
> I'm writing a Windows program for the K3. It connects at 38400 only. In
> trying to figure out what's wrong, I set my P3 and K3 to 9600 and used the K3
> U
3 at 9600.
> Cheers and 73,
> Fred KE7X
>
> For all KE7X Elecraft books see www.ke7x.com
>
>
> From: Elecraft on behalf of Per-Tore
> Aasestrand
> Sent: Tuesday, November 24, 2015 5:59 AM
> To: Mike Reublin NF4L
> Cc:
Has anyone contacted Elecraft support? This one seems to sorta fall into the
same category as the harsh/noisy receiver issue a few years back. AFAIR, that
one never was solved officially.
73, Mike NF4L
> On Dec 1, 2015, at 9:44 AM, j...@kk9a.com wrote:
>
> My AGC is on fast and I have also he
I asked a long time ago for separating SSB VOX from everything else. I found a
workaround for my needs, but I;d still like it. It's supposedly on the list.
73, Mike NF4L
> On Jan 20, 2015, at 1:36 PM, Brian Hunt wrote:
>
> Further the VOX GAIN setting is the same for DATA and SSB. I find I ha
For those of you with a Mac, there is now a working version of WSJT-X, thanks
to John G4KLA and some unknown behind-the-scenes elves. Their dedication and
determination to resolve the problems is... well..Elecraft like!
https://dl.dropboxusercontent.com/u/4192709/wsjtx-1.4.0-rc3-Dar
Don -
There are instructions in the K3Utility help file.Make sure you have the latest
version.
73, Mike NF4L
> On Jan 29, 2015, at 9:34 AM, haircut...@verizon.net wrote:
>
> Hello Folks,
> trying to load software to my K3. port ok and downloaded latest version. but
> keep getting a message that
This morning I noticed something strange with #3539. On 80 & 160, tune only put
out 10W. The level is set for 44W. Full output is 44W, power set to 100W. SWR
with the AT in bypass is 1.3 on 80M, 1.2 on 160M. All this on ANT1. Power out
on 40M & up is as expected.
I connected a dummy load to ANT
I did a poor job on describing the noise level jump. If I switch to ANT2, the
2nd rec. level goes WAAAY up.
73, Mike NF4L
> On Feb 2, 2015, at 7:38 AM, Mike Reublin NF4L wrote:
>
> This morning I noticed something strange with #3539. On 80 & 160, tune only
> put out 10W. The
A TX cal seems to have taken care of the power issue.
Mike NF4L
> On Feb 2, 2015, at 8:09 AM, Mike Reublin NF4L wrote:
>
> I did a poor job on describing the noise level jump. If I switch to ANT2, the
> 2nd rec. level goes WAAAY up.
>
> 73, Mike NF4L
>
>> On Fe
Barry -
>From Wayne's post...
See feature list below. Ordering and installation instructions can be found
here:
http://www.elecraft.com/order_form_parts.htm#K3%20Parts
773, Mike NF4L
> On Feb 13, 2015, at 7:52 AM, Barry wrote:
>
> Wat is involved, technically in performing the upgrade - is
I really do.
73, Mike NF4L
> On Feb 15, 2015, at 9:55 AM, brian wrote:
>
> Question: does anybody really use XFIL?
> Perhaps relocation of diversity there makes more sense.
>
> 73 de Brian/K3KO
> On 2/15/2015 14:48 PM, Arie Kleingeld PA3A wrote:
>> Wayne,
>>
>> Please do not take out LINK. I'
I tried the cat method. He objected to the ground probe. When my arms heal,
I'll try with a clip lead.
73, Mike NF4L
> On Feb 15, 2015, at 6:04 PM, Walter Underwood wrote:
>
> With no cat, I would recommend Sleater-Kinney.
>
> wunder
> K6WRU
> CM87wj
> http://observer.wunderwood.org/
>
> On
I'm still puzzled as to why there's a clock at all. Everything I do that
requires time is picked up from the computer.
73, Mike NF4L
> On Feb 15, 2015, at 6:28 PM, Rick WA6NHC wrote:
>
> I don't care about seeing the clock and also reset it when I think of it.
> All required timely functions
I'm curious. Why?
73, Mike NF4L
> On Feb 16, 2015, at 10:48 AM, Joshua Gould wrote:
>
> Any one know of a way to do it? I would like to be able to share the
> serial port among at least the KX3 utility and RUMLog (Which after reading
> the manual I have a much better understanding of) More sof
G! No!
If someone, looking at the display, doesn't notice the SPLT, or the down arrow,
then I don't think another indicator is gonna do any good. I think the problem
lies in NOT looking at the radio in the passion of the chase.
If the radio is in split, and the VFO's are equal, then pu
If it's an option, OK, but I am convinced that if an op misses the existing two
indicators on the LCD display, and the Δf yellow LED, then more indicators
aren't gonna help. And I am unanimous in my opinion.
I'd much rather see the effort go into separating VOX for data from VOX for SSB.
73, Mi
y, and your decision. I'm not going to stop
vigorously supporting Elecraft.
> On Feb 18, 2015, at 11:26 AM, Wayne Burdick wrote:
>
>
> On Feb 18, 2015, at 8:18 AM, Mike Reublin NF4L wrote:
>
>> If it's an option, OK, but I am convinced that if an op misses the
YES! Now that's something to work on
73, Mike NF4L
> On Feb 18, 2015, at 2:35 PM, Doug Welborn wrote:
>
> Why is it necessary to have split "off" when changing modes to digital from
> CW/SSB or in digital
> going to CW or SSB? I guess there is some reason for this, but it is
> aggravati
Someone made what I thought was a really good suggestion. I think it got lost
in the noise. I wish I could remember who made it.
Fix not being able to change modes while in split. How about it Wayne?
73, Mike NF4L
__
Elecraft mailing l
I'm trying to help a friend get his new K3/0 mini and RR box connected.
He's using Win8 and Xfinity. The RR box isn't talking to the Xfinity
modem/router. The LED on the RR box is solid green, the LED on the modem is
blinking amber.
Looking in the modem settings, the RR box doesn't show up in t
I've been using CocoaModem, but since Chen isn't supporting it anymore, I feel
the need to move on.
I'm trying to get fldigi working, hopefully with RUMLogNG.
It decodes CW but not RTTY, and doesn't transmit either. I suspect off-line
would be best.
73, Mike NF4L
__
Fred
http://www.elecraft.com/order_form_parts.htm#K3%20Parts
73, Mike NF4L
> On Feb 24, 2015, at 1:28 PM, Fred Jensen wrote:
>
> Can someone point me to the new K3 synthesizer option on the order page on
> the web site? I can't find it.
>
> 73,
>
> Fred K6DGW
> - Northern California Contest
should end
> up in the archives.
>
> DavidK0LUM
>
>
> On Feb 24, 2015, at 12:09 PM, Mike Reublin NF4L wrote:
>
>> I've been using CocoaModem, but since Chen isn't supporting it anymore, I
>> feel the need to move on.
>>
>> I'm trying to
There is a box and down arrow just under the frequency display. Set that and it
changes the mode on the K3, so I choose RTTY. The DATA sub-mode on the K3 is
AFSK A.
Any further info welcome!
73, Mike NF4L
> On Feb 24, 2015, at 13:09, Mike Reublin NF4L wrote:
>
> I've been usi
My favorite logger (for Mac) has a new version, RUMLogNG. It has a control
screen for the K3/KX3 and one for the P3/PX3. Tom DL2RUM is still working on
it, but it's very nice.
It uses Fldigi for digital modes, and transfers data using an Applescript.
With a lot of help, I put together a web pag
I have a friend (a new Elecrafter) who has a K3/0 Mini, and is connected to the
RemoteHamRadio service.
How is the connection to his logging program done? A USB to serial cable to
the COM1 connector on the RemoteRig box doesn't do it.
73, Mike NF4L
I bought the CD and went to Orifice Depot and had it printed, spiral bound. If
you get the CD, you can load the .pdf and search it.
73, Mike NF4L
> On Mar 2, 2015, at 15:44, Fred Jensen wrote:
>
> I have Fred's K3 book which also includes information on the P3. I bought
> the printed spiral-
I agree Bill, it's a real nuisance. Maybe Wayne can tack this onto his main
bill as a rider. It's a real life, almost-every-day irritant. No amount of
additional split warning will help, it's still too many button pushes, and
inconsistent behavior by mode.
73, Mike NF4L
> On Mar 3, 2015, at 22
Ted -
unless Tech Mode is łON˛ in Config. Since it is recommended that Tech Md
> be normally off
When I first discovered TechMode, I turned it on and it's been on for years
now. Who recommended it be off and why?
73, Mike NF4L
__
Elec
I seem to remember an Intel processor where they were
73, Mike NF4L
> On Mar 8, 2015, at 12:56, David Gilbert wrote:
>
>
> Because numbers are so subjective?
>
>
> On 3/8/2015 6:23 AM, Barry wrote:
>> All this talk about better numbers is great, but has anyone done a side by
>> side compa
I was helping a friend with his remote setup. We were on 20M CW, and I copied
him about an S5. He couldn't hear me at all (both 100W).
Later I realized I was on ANT 2. Why was I able to hear him so well? Do I have
a problem?
73, Mike NF4L
___
There is nothing connected to ANT 2.
> On Mar 13, 2015, at 09:17, Mike Reublin NF4L wrote:
>
> I was helping a friend with his remote setup. We were on 20M CW, and I copied
> him about an S5. He couldn't hear me at all (both 100W).
>
> Later I realized I was on ANT 2.
Per page 31 of the K3 owners manual sez
DATA A can be used for all audio-shift transmission modes, including AFSK and
PSK-31. VFO A shows the transmit suppressed carrier frequency and USB is normal
for DATA A. Compression is automatically set to 0 to reduce transmitted signal
distortion.
A
I just loaded 5.14 firmware, and ran the 50W TX gain calibration. It fails, the
K3 displays ERR TXG. The book says band-pass or low-pass filters out of whack.
What's my remedy?
73, Mike NF4L
__
Elecraft mailing list
Home: http://mailma
The 5W TX cal fails also, but no error message on the K3.
> On Mar 24, 2015, at 11:41, Mike Reublin NF4L wrote:
>
> I just loaded 5.14 firmware, and ran the 50W TX gain calibration. It fails,
> the K3 displays ERR TXG. The book says band-pass or low-pass filters out of
> whack.
That will cause the owl to blink, thus losing orientation to True North.
Mike NF4L
> On Mar 25, 2015, at 14:25, Bob Gibson via Elecraft
> wrote:
>
> HOW ABOUT A LAMP WITH 100 WATT BLUB, THATS ALL US OLD GUYS HAD! 73s Bob W5RG
>
__
My K3 puts out no power in any mode, either on the SteppIR or into a dummy
load. It's not in test or split. TX INH is off. Holding tune results in the LCD
displaying 0 W, and the VFO A area changes to 2 dashes on the right, no digits.
Tune power is set to 50W, Power to 100W.
A 50W TX Gain calib
move the TMP cables around to improve on the birdie
> problem.
>
> 73
> Arie PA3A
>
> Mike Reublin NF4L schreef op 3-5-2015 om 20:03:
>> What could I expect to actually hear differently (not lab measurements)
>> after the installation of the new synths? I have no in
Ken -
I agree that you'll most likely relegate the Eagle to second status. If you
hook the K3 up to the Centurion, be sure to follow the instructions for the K3.
It's different.
Fred Cady's (KE7X) book on the K3 is well worth having also. I bought it on CD
so I can search it, and I took the CD
Yes! And the two fingers I use are fully extended thumb and pinky.
73, Mike NF4L
> On May 20, 2015, at 1:53 PM, GRANT YOUNGMAN wrote:
>
>
>> On May 20, 2015, at 12:46 PM, Mike Reublin NF4L wrote:
>>
>> Is it just me, or has it been a tad testy here since the
My Ameritron RCS-12 automagic antenna switch is sulking, and not switching the
remote RCS-10.
I'm thinking of replacing it with a KRC2 pre-built. Is anyone using it with a
K3 and the Ameritron remote box? How difficult to configure it to work from the
K3 ACC with the RCS-10?
The manual has the
s be used for? Perhaps alternate antennas for a band,
> or other things.
>
> It really is pretty simple. The large majority of users don’t even need to
> use the KRC2 utility to remap the output pins. Just hook things up and
> operate.
>
> 73!
>
> - Jack B, W6FB
>
>
rent purpose than for the standard version.
> If you happen to have the KRC2ACC hardware, you can negate the changes for
> the announciator functions by loading the non-ACC version of the KRC2
> firmware and it will function as the standard one.
>
> 73,
> Don W3FPR
>
>
On my K3/P3, I get a rise when the cursor crosses a screen boundary. Lasts a
second or so.
73, Mike NF4L
> On Jun 16, 2015, at 11:54 AM, GDR wrote:
>
> While tuning the KX3 I've noticed the noise floor jump up on the PX3. Seems
> to do it on all bands. Is this normal? Anyone have any idea abo
Not a lot of info..
http://www.elecraft.com/elecraft_prod_list.htm#k3
73, Mike NF4L
> On Jun 20, 2015, at 9:11 AM, Mike Sanders wrote:
>
> So where does one find the KXV3B info/pricing etc. on the Elecraft web site?
> I have looked by no luck so far. 73, Mike
_
I'm confused. I was with Harlan, that a config file from another serial number
wouldn't load. Has something changed with the K3S? How about K3 to K3?
73, Mike NF4L
> On Jun 21, 2015, at 2:56 PM, Wayne Burdick wrote:
>
> Yes. However, on restore of the configuration file to the K3S, K3 Utility
Over
> On Jun 22, 2015, at 3:01 PM, Mike Reublin NF4L wrote:
>
> I'm confused. I was with Harlan, that a config file from another serial
> number wouldn't load. Has something changed with the K3S? How about K3 to K3?
>
> 73, Mike NF4L
>
>
>> On
I found this on Nabble. Wayne?
No. Some of what is saved is rig-specific VCO calibration data
Dick, K6KR
73, Mike NF4L
> On Jun 22, 2015, at 3:01 PM, Mike Reublin NF4L wrote:
>
> I'm confused. I was with Harlan, that a config file from another serial
> number wouldn'
raft.com
>
>> On Jun 23, 2015, at 4:31 PM, Mike Reublin NF4L wrote:
>>
>> I found this on Nabble. Wayne?
>>
>> No. Some of what is saved is rig-specific VCO calibration data
>>
>> Dick, K6KR
>>
>> 73, Mike NF4L
>>
>>
>&g
The dab of beeswax on a toothpick that someone else posted looked good to me.
73, Mike NF4L
> On Jun 26, 2015, at 11:48 AM, George via Elecraft
> wrote:
>
> Wow, are they available anywhere in the USA? 72 George/W2BPI
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2
The K3S has so much audio tailoring built in, pretty much any mic, when
properly set up, will garner good audio reports. There's no need to spend cubic
dollars on microphones.
73, Mike NF4L
> On Jul 5, 2015, at 7:59 AM, Bob McGraw - K4TAX wrote:
>
> New to the Reflector and new to Elecraft wi
After trying several Mac logging programs when switching from Windoze, RUMLog
is the clear winner for me. Focus on what meets your logging needs, they all
support Th K-series as far as control goes.
RUMLog ties in well with fldigi for digital modes, has a really good interface
to LoTW and clust
Yes the SteppIR will follow the radio. I don't have a KPA500 so cannot answer
that one.
73, Mike NF4L
> On Nov 22, 2014, at 5:58 AM, Anton Koval, MW0EDX via Elecraft
> wrote:
>
> GM/GA/GE,
> The K3 question in connection with Steppir yagi(s).
> Will Steppir yagi follow K3 in the same manner a
Well, the K3 IS a very sensitive rig.
73, Mike NF4L
> On Nov 24, 2014, at 3:37 AM, Eric Norris wrote:
>
> I have run KX3-KXPA100-KPA500-KAT500 and it was seamless QSK on CW. A
> beautiful thing to behold--until I saw what looked like a tear forming on the
> lower right side of the K3 disp
I tend to try to save a few bux by buying used older gear. My XYL always tells
me that's false economy because at some point I'll want newer/better and won't
get much out of the dented scratched boat-anchors.
She's SO wise.
73, Mike NF4L
> On Dec 6, 2014, at 10:08 AM, Al Gulseth wrote:
>
>
If that is Toyota's business model, the yes, of course. It is Elecraft's model,
so it's not unreasonable to expect it. It was a big part of my buying decision.
73, Mike NF4L
> On Dec 7, 2014, at 9:04 AM, W2BLC wrote:
>
> I have a three year old Toyota RAV - it is a reasonably good car. However
Joe -
My ACCY plug (which I'm almost sure came from Elecraft) has two Phillips head
screws on one side for taking the shell apart. They're black, and easily
overlooked.
GL & 73, Mike NF4L
> On Dec 26, 2014, at 8:34 PM, Joseph Carter wrote:
>
> My wonderful XYL gave me the PR6 for Christmas - t
When I power up the K3, it shows ERR BPF2. Pushing any button causes the
message to go away.
The manual says to *De Install the KBPF3.
I don't want to get rid of my KBPF3. What does the asterisk refer to?
73, Mike NF4L
__
Elecraft mail
Nobody knows the cure for ERR BPF2?
Mike NF4L
> On Dec 29, 2014, at 3:57 PM, Mike Reublin NF4L wrote:
>
> When I power up the K3, it shows ERR BPF2. Pushing any button causes the
> message to go away.
>
> The manual says to *De Install the KBPF3.
>
> I don'
OK, so how about ERR BP2?
Mike
> On Dec 30, 2014, at 10:38 AM, Mike Reublin NF4L wrote:
>
> Nobody knows the cure for ERR BPF2?
>
> Mike NF4L
>
>> On Dec 29, 2014, at 3:57 PM, Mike Reublin NF4L wrote:
>>
>> When I power up the K3, it shows ERR
It cost $63.34 to ship my K3 from Florida to California and $56.00 to ship it
back. UPS + insurance.
73, Mike NF4L
> On Jan 1, 2015, at 7:44 AM, Poul Erik Karlshøj (PKA) wrote:
>
> For a Danish ham warranty repair shipping would be
> repair in Italy
> 5kg parcel (K3) 2*46 = 92 USD
> repair in
1 - 100 of 111 matches
Mail list logo
