Re: [Elecraft] LOW RESALE VALUE OF LOW SERIAL NUMBERS

Something else to ponderwould you pay as much for K2 #50 as you would for K2 #5000 ? I wouldn't. 73 Larry WA2DGD Doug Faunt N6TQS +1-510-655-8604 wrote: I prefer to think that my low serial number K3 will increase in value and add to my estate, as a collectors item. Rega

Re: [Elecraft] K1 Dumb Question

Description Max Input Voltage ZR78L06 6v regulator 20vdc LM29308v regulator 26vdc LM380 Audio Amp 22vdc LT1252 Audio Amp28vdc I looks like the 6v regulator is the limiting component at 20vdc max input. 73 Larry kb5dxy ___ Elecraft

Re: [Elecraft] K1 -- orientation of C13 and C20?

ou can see that both caps have the flat side facing to the rear of the board. I downloaded the manual as a PDF and this allows me to zoom in on these pages if the illustrations are a little small. You can also use the search function to locate parts on both the schematics and parts placement d

Re: [Elecraft] K2 regulator part no.

The 78L05 is a quad 8 bit DAC and the 77L06 is a 6 volt regulator. Not the same at all. The 77L06 is used in the KX1, not he K1 or K2. Contact Elecraft to get the correct part. 73 Larry kb5dxy Tom Zeltwanger wrote: In my RF board parts I can not find U8 (78L05) I have a 77L06 regulator in

Re: [Elecraft] Planning kit purchase

eliminate it, absolutely quiet. Bottom line, the NB does work on certain types of noise, but not on all. I found the same to be true of the Kenwood TS-940 NB also. Have a great weekend. Larry WA2DGD Fred (FL) wrote: I didn't have good luck with Elecraft's K2 NOISE BLANKER. I know its adv

[Elecraft] K2 and TS-940s -

lot easier to service the K2, easier to work on, and the support from this reflector is unmatched anywhere else. Larry WA2DGD K2 #1672 -- 73 Larry WA2DGD ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to

Re: [Elecraft] magnifying Lamp

solder and see the smallest of solder "bridges". Its also fairly comfortable. Just google optivisor, they have some off brand copies for about $20. 73 Larry WA2DGD I have learned that the "helping hands" I got from Radio Shack do not provide nearly enough Magnificati

Re: [Elecraft] K2 and Feedback

question, but I think you're on the right track using a separate supply. 73 Larry WA2DGD David Fleming wrote: I have a significant feedback problem with my K2/KPA100. When transmitting there feedback (sounds as clear and as loud as a PA system) through an attached external speaker. The onl

Re: [Elecraft] Keyboard question

Maybe something like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16823166018 73 Larry WA2DGD Ken Kopp wrote: Can someone aim me at a "small" keyboard? I realize that "small" is relative, so let's say something that's "appropiate"

[Elecraft] OT - need QEX July 2004

Hello all and an early July 4th Greetings, I'm in need of an article...Help for Amplifier Failure in the HP8640B. I believe it is in QEX July 2004 page 18. Any help would be greatly appreciated. Thanks, Happy 4th -- 73 Larry WA2DGD ___ Ele

Re: [Elecraft] OT - need QEX July 2004

Thanks to all, I've already received a copy of the article. 73 Larry WA2DGD ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

[Elecraft] K2 is still a good choice

else had built a kit. I know that Elecraft will get at least 2 orders from that group. 73 Larry KB5DXY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc

Re: [Elecraft] Proper K2 power cord?

fine. If it were me, I would buy the connector from Elecraft. 73 Larry KB5DXY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net

Re: [Elecraft] Proper K2 power cord?

I got this information from http://www.powerstream.com/Wire_Size.htm. 73 Larry KB5DXY Here is a chart of wire gage versus current capacity for power transmission. Gage Amps 12 9.3 14 5.9 16 3.7 18 2.3 20 1.5 Where does this chart come from? In

[Elecraft] Need help with K2 #6196

8v on all bands, across all bands at R30. Is this related to missing RFC15? If not, what should he look at next. Thanks -- 73 Larry WA2DGD ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subsc

Re: [Elecraft] W1 as field strength meter?

I had the WM1 and don't think thats possible. It is possible with the LP-100 digital vector rf wattmeter by N8LP. http://www.telepostinc.com/lp100.html I'm very pleased with LP-100. 73 Larry WA2DGD Kurt Loken wrote: Hello All, Is is possible to use the W1 Computing Wattmeter

Re: [Elecraft] USB to Serial Stick

adapter available. I purchased the adapter for about $35 directly from www.keyspan.com. This adapter has worked flawlessly for every application I have tried it with on both Windows and Mac platforms. 73 Larry KB5DXY ___ Elecraft mailing list Post to

Re: RE: [Elecraft] Re: CW recognition

g a good approach to learning code. FISTS also has a Code Buddy program (www.qsl.net/w9em) that matches you up with a on-the-air buddy to help you with your code. I am currently using the G4FON software to learn code and plan on using the Code Buddy program when I get my K1 buil

[Elecraft] K1 VFO range

e the choice they did. I have tried searching the archives but for some reason I am not getting any hits. Thanks for your replies, Larry KB5DXY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the

Re: [Elecraft] K1 VFO range

Mike Morrow wrote: Larry wrote I am building the K1 with the 4 band filter board. I am at the step where I must decide which VFO range to choose, 150 kHz or 80 kHz. I would like to hear from those who have built this receiver and why they made the choice they did. Larry, I've

[Fwd: Re: [Elecraft] KX-1 dead :(]

Tod, I am assuming that you are the builder of your KX-1. Go through the troubleshooting and testing sections in the manual. Post what you find. 73 Larry KB5DXY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber

Re: [Elecraft] KX-1 dead :(

een ground and the input of either voltage regulator. If you have a short then C7 is probably shorted. Replace the bad component and repeat these measurements before turning power back on. Larry KB5DXY ___ Elecraft mailing list Post to: Elecraft@mailm

Re: [Elecraft] 50 vs 75 ohm N-connectors

tronics.us/typencableconnectors.htm. This might help you match your connectors to their appropriate cables. 73 Larry KB5DXY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Ad

Re: [Elecraft] Long Island QRP Club

the Las Vegas, NV area? Either QRP or Elecrafters or both. Thanks, Larry, KB5DXY K1 #2269 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

Re: [Elecraft] OT: Looking for some foam.

A quick google search got http://www.foambymail.com. Click on Packaging Foam on the left and I think you will find exactly what you are looking for. Larry, KB5DXY K1 #2269 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a

[Elecraft] Attic Antenna

setup? Thanks, Larry, KB5DXY K1 #2269 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] Attic Antenna

also be adding a KAT1. I will report back with results when I get the whole thing working. Larry, KB5DXY K1 #2269 (in progress) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr

Re: [Elecraft] Attic Ant.-Closed Loop vs. Open Ends?

til I went to the HELP menu. Under HELP there are three tutorials. If you go through each one then you get a good feel on how the program works. 73, Larry, KB5DXY K1 #2269 (in progress) ___ Elecraft mailing list Post to: Ele

Re: [Elecraft] K2 assembly question

Doug Person wrote: Everybody needs one of these little dodads with the two alligator clips mounted on ball joints. Radio Shack used to have them. Radio Shack still carry this item. Kronus Helping Hands , Cat# 0-87259-879-9. I have seen them in the stores locally. Larry KB5DXY

Re: [Elecraft] Hakko 808 tip?

Don Wilhelm wrote: Doug, Well, I just checked and they do not list it on their website. This tip is available at http://shop.kiesub.com/Categories.bok?category=Solder+Equipment 73 Larry KB5DXY ___ Elecraft mailing list Post to: Elecraft

[Elecraft] OT: Ham radio promotional video

Noticed the following on eham: http://www.youtube.com/watch?v=fAOOd48j6WA Its a very well done video showing ham radio and contesting. Worth a look. -- 73 Larry WA2DGD ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a

[Elecraft] Crystal source

I need to build a crystal oscillator to signal trace my K1. Does anyone know of a good source for crystals? 73 Larry KB5DXY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr

[Elecraft] Wrong freq. output, K1

4, CC, and CD which all adjust OK during the band alignments. I am suspicious that X2 is off frequency but I want to go through the receiver and VFO signal tracing (come on XG2!) and transmitter tracing before I start replacing anything. Any ideas would be greatly appreciated. 73 Larry K

[Elecraft] K1, wrong transmit freq

ransmitter tracing before I start replacing anything. Any ideas would be greatly appreciated. 73 Larry KB5DXY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub,

Re: [Elecraft] K1, wrong transmit freq

Thanks Don, That was the problem. All bands are now working correctly. 73 Larry kb5dxy Don Wilhelm wrote: Larry, I assume a 4 band filter board. Are the trimmers on the filter board set near the center point? If not, realign the 15 and 20 meter filters. It is possible to

[Elecraft] KAT1 fails calibration

s. I have inspected and reinspected all solder joints several times and can find no cold joints or shorts. D1, D2 and D3 all have good front to back ratios. Can someone point me in the right direction to troubleshoot this problem? 73 Larry k

Re: [Elecraft] KAT1 fails calibration

Well, this is a testament to not working while your tired. I have leads 1 and 2 swapped on T1. This is why I like this forum so much. You made me go back and check something I had already checked three times. Now I get to remove and re-do T1! Thanks Don, 73 Larry kb5dxy Be certain the

[Elecraft] Thanks to all

on my code and haven't had my first HF QSO yet. So, great things to come. Thanks again, 73 Larry kb5dxy ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, su

[Elecraft] KPA1500

before I call support? Larry, WA9MAG Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

Re: [Elecraft] Radio Packing for Shipping

Thanks to all that replied to my packaging question. I'm off this AM for suitable boxes and await the RSA number from Dale. 73 Larry K1ZW -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Gregory Sent: S

[Elecraft] question

do I have to resend my original request? best, k4mwe __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://

[Elecraft] (no subject)

do I have to resend my original request? best, k4mwe __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://

[Elecraft] question-equivalence of systems

I am now using an Icom756proII and an electracraft 500 watt power amplifier. If I replace my Icom with the electracraft receiver-100 watt, what else will I need to have an equivalent system? thanks. k4mwe. __ Elecraft mailing list Home:

[Elecraft] (no subject)

Electrify Digest, Vol 92, Issue 47, please remove 6,7 and 9,they had nothing to do with my original question. thanks __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Po

[Elecraft] QUESTION- EQUIVALEBCE OF SYSTENS

I am now using an Icom756proII and an electracraft 500 watt power amplifier. If I replace my Icom with the electracraft receiver-100 watt, what else will I need to have an equivalent system? thanks. k4mwe. __ Elecraft mailing list Home:

[Elecraft] planning to buy what should i get

I am planning to buy a K3 soon. What should it include if I am predominantly a phone operator in as many bans as possible. I may in the future also do cw. Thanks in advance, k4mwe __ Elecraft mailing list Home: http://mailman.qth.net/mai

[Elecraft] Alaska

What bands, times, settings, etc. would be best to make a contact with a ham in Alaska using a K3? Thanks, k4mwe __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] No Response From Elecraft

I HAVE BEEN HEARING ABOUT THE GREAT SERVICE THAT ELECTRIFY GIVES. WELL WE BOUGHT A KPA-500 AMPLIFIER THAT HAS GONE BAD. WE SENT AN EMAIL YESTERDAY AND TRIED TO CALL THEM TODAY. SO FAR NO RESPONSE. MAN WHAT SERVICE! K4MWE __ Elecraft

[Elecraft] TX Gain

report says 10.8 w 1.8 w 1.1 w 10 w Elapse time: 13 sec Tx Gain calibration failed because power reading did not converge to a consistent value. 73 Larry K1ZW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

[Elecraft] Heil Goldline

Is anybody using a Heil Goldline with the HC-4 and 5 elements with their K3. If so is it working well? 73 Larry K1ZW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] KX3 Info Sign-up Form

I'm having a problem with the sign-up form!!! Where is it???? Larry K1ZW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qt

[Elecraft] BUTTON ON K3 TOO TURN ON KPA500 POWER

What would be nice for a person with limited mobility, like myself, would be the option for the K3 software to turn the KPA500 amplifier from yellow to green when the tuning is finished and the tune bitten is released. If such is now possible, please let me know, thanks Larry Royster

[Elecraft] 100 watt amplifier

Does anyone have a recommendation for a 100 watt amplifier for 2 meters for the k3? Thanks in advance. k4mwe __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Po

[Elecraft] Problems with receiving and tranmitted signals on 2 meters

We gave a new k3 with the 2 meter module built in. When listening and transmitting on 2 meters, our signal is not clear. We have tried several things to correct the problem, but it is still present. We gave removed and checked for bad cables, etc. but to no avail. The problem seems to now be in

[Elecraft] K3 Birdies

ot;problem" was identifed/defined. He even made a house call to demonstrate its effectiveness on Wedensday. While it is still in Beta test it appears to provide a reasonable fix. Elecraft will likely release more soon. Thanks Wayne for the prompt response and personal help. Larry w6od --

Re: [Elecraft] K3 Birdies

ould guess with time I will understand that. So help is on th way!!! Larry moore w6od Robert Dorchuck wrote: > > I recently installed the KRX3 and seem to have some of the birdie problems > others have noted, the loudest on 14.186.7 (S3). The others are masked > when connected to an

[Elecraft] Example of great Elecraft service

n and works great. I ask myself, what kind of service would I have gotten from some of the other radio suppliers out there? Most likely nowhere close to Elecraft. I just wanted to thank the staff at Elecraft and especially Scott for service above and beyond what is normally expected from a comp

[Elecraft] K3 and CW problem

ps to nothing. Anyone have any ideas? What am I missing? Larry Naumann N0SA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/ma

[Elecraft] K3 and CW problem

about it this explains some things I noticed with my K2 but never figured out. I'll post to the list tomorrow as this might be interesting to others to know that some headphones output really drops at the lower frequencies. Larry Naumann N0SA I'm going to make a guess that the filte

[Elecraft] Elecraft K2

HI group I've been thinking about purchasing a nice used K2 but I've noticed Elecraft doesn't have the KAT100 tuner anymore. Has there been any talk to discontinuing the K2? Thoughts? Larry, KN8N Kalamazoo Michigan

[Elecraft] K2

before I attempt this minor project. Thanks. Larry, KN8N Kalamazoo Michigan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This

[Elecraft] NJQRP Skeeter Hunt in two weeks!

eters signed up so far - c'mon in and join the fun! Summer's not over yet - not by a long shot! 72 de Larry W2LJ Skeeter # 13 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailm

[Elecraft] Skeeter Hun Log Summaries due

d did NOT send in your summary, now is a good time! The official 2024 Skeeter Hunt Scoreboard will be posted on Monday, 9/2. Don't miss out on being included if you participated! 72 de Larry W2LJ __ Elecraft mailing list

[Elecraft] Elecraft K2

Hi Everyone I'm curious what others are using to protect their K2 when you take it out in the field? Anything in particular that works well for its size? Thanks Larry, KN8N Kalamazoo Michigan __ Elecraft mailing list Home:

[Elecraft] ssb on k3

d 1.0 roofing filters to have at least some "peace" when operating 75 meters at night? Many thanks and 73's Larry WD4MBE ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscribe

[Elecraft] Call for Winter QRP Foxes

So far we have only a small number of folks who have volunteered to be foxes for the upcoming winter foxhunts which start on Tuesday, Oct. 30th...Yes that's only about 2 weeks away. If you participate in the foxhunts PLEASE consider applying to be a fox ASAP via. For 40 meters...

[Elecraft] October RFTB

ss given on the Autolog page. The deadline for logs is October 28th at 2400 UTC. Hope to catch you on the air Sunday evening! -- 73 de Larry W2LJ QRP - When you care to send the very least! http://www.w2lj.qrpradio.com http://w2lj.blogspot.com/ ___ E

[Elecraft] K2 Tuning Knob

Some time ago I purchased a Yaseu FT100 Tuning Knob for my K2, and a friend wants one, but I cannot remember where I got it. I know it was a phone number given on the reflector and wondered if anyone can help me. Thanks - Larry (G0IKE) k2 # 2424

[Elecraft_K3] Re: Re K3 delays

look at the launch of the Orion... a radio almost entirely built in-house by people with lots of manufacturing expertise and experience... and it was delayed over 1 year from introduction ;-) 73, Larry N8LP --- In [EMAIL PROTECTED], "lesesq" <[EMAIL PROTECTED]> wrote: > &g

[Elecraft] NAQCC Sprint Announcement

ecially regular mail entries. For further information, please visit: http://www.arm-tek.net/~yoel//sprintrules.html To join the NAQCC, please visit: http://www.arm-tek.net/~yoel//joinup.html -- 73 de Larry W2LJ - NAQCC #35 QRP - When you care to use the very least! _

[Elecraft] Re: K3 question re dual receive

or well done. This seems like a perfect fit for DSP, and the hardware is there already. I am posting this to both lists, since my emails to the regular reflector periodically get blocked by the SPAM filter. 73, Larry N8LP Brett gazdzinski wrote: I hope Elecraft eventually looks into

Re: [Elecraft] Ham software

some free programs of use for remote control, www.telepostinc.com. 73, Larry N8LP Julian G4ILO wrote: > I don't have any axe to grind for any of the programs mentioned, and > in fact use none of them, but I have to take issue with the notion > that HRD is great just because it's f

[Elecraft] K3 roofing filters

ot be ordering the sub-receiver. For what it's worth, I wish I could get a power supply/speaker combo as an option from Elecraft. Larry WD4MBE ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post t

[Elecraft] (no subject)

Is there any word on the availability of the "External Reference Option" and the cost?? Larry Putman WB3ANQ Pasadena, Maryland FM19rc K3 on Order Be a better pen pal. Te

[Elecraft] External Ref opt K3

Is there any word on the availability of the "External Reference Option" and the cost?? Larry Putman WB3ANQ Pasadena, Maryland FM19rc K3 on Order Never miss a thing.

[Elecraft] External Reference Option K3

Sorry for the missing subject in my first message Is there any word on the availability of the "External Reference Option" and the cost?? Larry Putman WB3ANQ Pasadena, Maryl

[Elecraft] November NAQCC Sprint

This Wednesday evening, the North American QRP CW Club will be holding its monthly sprint. Here are the particulars: Date and time: Thursday November 22nd, 0030-0230 UTC (Remember that's Wednesday evening here in the USA) That's 8:30 - 10:30 EDT, 7:30 - 9:30 CDT, 6:30 - 8:30 MDT and 5:30 -

[Elecraft] KX-1 Stopped working - Help Needed

. As background, I have built half a dozen Heathkits including a SB-100, and in the last two years have built the SST, and MMR-40, transceivers and the KD1JV Stand Alone Transmitter. All worked well. Thanks in advance for any help you can provide. Larry N4QY

[Elecraft] k3- external speakers

Does anyone know the impedance range of the external speakers for the K3? I have looked and can't find it in the specs...no doubt I've overlooked something that is obvious. Larry wd4mbe ___ Elecraft mailing list Post to: Elecraft@mailman.q

RE: [Elecraft] k3- external speakers

Lyle Johnson [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 27, 2007 9:12 PM To: Larry Maguire Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] k3- external speakers > Does anyone know the impedance range of the external speakers for the K3? 4 ohms to 16 ohms ought to work fine. 4 o

Re: [Elecraft] Online Orders: both international USPS options, were not valid

options unless you live near a major city. Express Mail is generally a good bet. Express Mail Guaranteed is actually handled by Fedex and is much more expensive. FWIW, I send lots of packages to Europe and have never had to file a claim... but I always buy insurance ;-) 73, Larry N8LP Date: Wed

[Elecraft] Config storage (was K3 Curious behavio)

e updating directly from the rig if it had internet access. Could the KIO3 be reworked to add a couple ports like these? 73, Larry N8LP Date: Wed, 28 Nov 2007 19:10:03 -0800 From: "Carl Clawson" <[EMAIL PROTECTED]> Subject: Re: [Elecraft] K3 Curious behavio To: Message-ID: &

Re: [Elecraft] K3 ..what production run is currently being shipped?

ake a deposit, I would have had mine long ago ;-( I'm eager to get mine hooked to my panadapter prototype ;-) 73, Larry N8LP Date: Sat, 01 Dec 2007 23:53:23 -0500 From: Jerry Flanders <[EMAIL PROTECTED]> Subject: Re: [Elecraft] K3 ..what production run is currently being shi

[Elecraft] Neat K3 Video!

uilt-in fast acting attenuator to obviate the need for external power control if they want a broader audience than K3 owners ;-) 73, Larry N8LP KK7P re W4TV: >Please be assured that we appreciate your thoughtful and constructive comments on the K3. I strongly second that Lyle...I o

[Elecraft] K3 Options now to 1/30 availability

The K3 2nd receiver, DVR and FM options have been updated to show a 1/30 availability date. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

[Elecraft] K3 - Substitution of stock 2.7 for the 2.8

Seems like the simplest solution would be to buy the 2.8 for cleaner xmit audio and shift the 2.7 to the 2nd rcvr to enhance its receive audio. Larry KW4A ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to

[Elecraft] K3- 2nd Rcvr

What about it Wayne? Does the 2nd rcvr come with any filters installed? Larry KW4A ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

[Elecraft] 2nd Rcvr

Well, lazy me! Consider that question answered and closed. Tnx fer setting me striaght guys! Larry ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc

[Elecraft] Temperature Senors K3

I have seen mention that the K3 has two Temperature Senors. Can the temperature reading be shown on the display? Larry Putman WB3ANQ Pasadena, Maryland FM19rc www.wb3anq.com K3 On Order Never miss a

[Elecraft] Which element in Proset sold by Elecraft

I've read the product description for this Headset on the Elecraft site but still don't know which element is in the Heil Proset K2is it the HC4 or HC5? -- View this message in context: http://www.nabble.com/Which-element-in-Proset-sold-by-Elecraft-tp14224186p14224186.html Sent from the Ele

[Elecraft] December NAQCC Sprint

This Tuesday evening, the North American QRP CW Club will be holding its monthly sprint. Here are the particulars: Date and time: Wednesday December 13th, 0130-0330 UTC (Remember that's Tuesday evening here in the USA) That's 8:30 - 10:30 EST, 7:30 - 9:30 CST, 6:30 - 8:30 MST and 5:30 - 7:3

Re: [Elecraft] K3 Positions - Warranty

Maybe Thom will be happy now and craw back into a Crab Trap! Larry Putman - Original Message From: Don Rasmussen <[EMAIL PROTECTED]> To: elecraft@mailman.qth.net Sent: Tuesday, December 11, 2007 9:24:07 PM Subject: [Elecraft] K3 Positions - Warranty This is a "stand up&q

[Elecraft] OT: Source for fiberglass bulkhead cabinet

Can someone tell me where to get a 12X12 X5" fiberglass bulkhead cabinet for mounting to the outside wall for bringing in coax, cables etc and possibly has a copper or aluminum plate for mounting lightening protection devices just before entering the shack wall? Apparently I'm not using the corr

Re: [Elecraft] OT: Source for fiberglass bulkhead cabinet

Thanks all who responded...I now have about 4 good sources to check out their product... If anyone else needs a little prod in the right direction as I did, please e-mail me direct. 73, Larry K1UO -- View this message in context: http://www.nabble.com/OT%3A-Source-for-fiberglass-bulkhead

[Elecraft] K3 dust cover

Got the cover...now need the radio!! http://www.nabble.com/file/p14363190/Elecraft%2BK3%2BCover.jpeg -- View this message in context: http://www.nabble.com/K3-dust-cover-tp14363190p14363190.html Sent from the Elecraft mailing list archive at Nabble.com.

RE: [Elecraft] CB band TX? - I'm shocked!

Richard Kent wrote: > > > > Maybe there was another > answer all along we did not know it. Maybe the popularity of the CB band > has > dwindled to the point that it is not the hot spot we remember. > or maybe the FCC will give us back the 11 meter band that used to be a Ham band! yeahr

RE: [Elecraft] K3 - A CW rig?

believe I will be satisfied with the rig. As time passes, I predict there will be more ssb activity, including driving linear amps, with the rig than cw. Eric and/or Wayne if you read this post, I hope you will come to the Charlotte, NC Hamfest in March(?) 2008 with the K3 or send Lisa. Larry WD4MBE

RE: [Elecraft] Which Heil Prosets should we carry?

hope you can come to the Charlotte, NC Hamfest with the K3 on March 8 & 9! 73, Larry WD4MBE -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Swartz - WA6HHQ, Elecraft Sent: Thursday, December 27, 2007 8:49 PM To: Elecraft List Subject: [Elec

RE: [Elecraft] Which Heil Prosets should we carry?

-Original Message- From: Larry Maguire [mailto:[EMAIL PROTECTED] Sent: Thursday, December 27, 2007 9:43 PM To: 'Eric Swartz - WA6HHQ, Elecraft'; 'Elecraft List' Subject: RE: [Elecraft] Which Heil Prosets should we carry? Eric, I'm going to pass on the Heil Pr

Re: [Elecraft] Which Heil Prosets should we carry?

My vote would be for the Proset with H4 element for Contesting/DXing use. Second would be the Proset Plus what contains both the HC4/HC5 elements but is a bit heavier and more tiring to wear for long periods. (consider the Heil footswitch also!) Most of all thanks for asking. 73, Larry K1UO

  1   2   3   4   5   6   7   8   9   10   >