I use a spray bottle for
the alchol, actually.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
My vote is for the Bencher ... I've owned several and have one now.
I also have a Elecraft/Bencher HexKey ... very fine, too
And, there's also a Begali . my next one.
73 Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
__
I have all but about the 1st 20 QST's, so can supply a
quality copy if that will help.
Will need the issue to locate the article.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qt
shock-absorber. Sending with only wrist up-and
-down action will result in the dreaded "glass fist".
Transcribe any copy in longhand. Most people can write much
faster than they can print. This is self-evident but it seems few
do so.
73! Ken Kopp - K0PP
[EMAIL PROTE
are going through
a learning process, too.
Just an observation ...
73! Ken Kopp - K0PP
K2 S/N 5665, K3
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
QST de W1AW
ARRL Bulletin 24 ARLB024
From ARRL Headquarters
Newington CT October 30, 2007
To all radio amateurs
Riley Hollingsworth, K4ZDH, Special Counsel for the FCC's
Enforcement Bureau, has decided not to retire. He had announced
last week that he would leave the FCC in January 2008.
o go into here.
Sending "N" instead of "9" is an example ... 5NN. Portions
of seconds add up to minutes and more Q's.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@ma
o go into here.
Sending "N" instead of "9" is an example ... 5NN. Portions
of seconds add up to minutes and more Q's.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@ma
I apologize for the duplicate posting ... (:-((
Doddering ole poop ...
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
Would this be the first case of "K3 scalping"? (:-))
K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
I assume the microphone connector can be configured
to suit different microphones, just like the K2
73! Ken Kopp - K0PP
K2 #5665, K3
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
er.
Thanks all, and ...
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.
he Aptos folks being
able to meet (almost) everyone's wish-list items, regardless
of how obscure. Perhaps I can build an adapter box and
"sticky-tape" it to the rear of my K3, and a "Y" phono cable
will solve the CW foot switch / SSB PTT matter.
73! Ken Kopp
My order #47389 dated 29 April was shipped 08 NOV.
UPS tracking says delivery will be on the 13th
73! Ken Kopp - K0PP
K2 # 5665
K3 #
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
m with this ... it's just an observation.
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.n
My error ... I think it is SN 66, NOT 666.
Ken Kopp - K0PP
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Mine came today, too!
Invoice #47389, entered on 4/29 via FAX
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
K3 #56 is on the air ... made one 40M CW QSO
last night. Now I need to learn to operate it! (:-))
Ken Kopp - K0PP
K2 # 5665
K3 # 56
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
? Bet it won't
be a very long wait. Perhaps I've already missed out (:-))
73! Ken Kopp - K0PP
K2 #5665
K3 #56
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subsc
". The 8-pole (Inrad)
filters don't require this step.
I have 6 kHz, 2.8 kHz, 1.8 kHz, 1 kHz and 400 Hz filters,
all 8-pole units and I'm really glad I made the extra investment.
Even with my limited experience with the K3, it's SMOOTH!
A wonderful radio!
73! Ken Kopp - K
Well, I did say it's a "minor" item ... (:-))
Perhaps "chore" or "avoidable step" would have been
a better choice.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Ele
ing the holes and cutting
the "V" slot.
73! Ken Kopp - K0PP
K2 #5665
K3 #56
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
Did you do the "TRANSMITTER TEST" steps on page 52?
They're a "must".
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to pos
Says something about the popularity of eHam, doesn't it
73! Ken Kopp - K0PP
K2 #5665
K3 #56
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the
No problem here with Norton, Ad-Aware or Spybot
Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
x adapters, mobile mounts, pre-made coax
jumpers, etc.
And of course, there's always Radio Scrap, but their
product lines are rapidly diminishing.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Po
I could exchange it for a K3 cable and offered to pay
a restocking fee, but have not even received a "no thank
you" reply. (:-((
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft
The $153.25 cost I noted was for the ENTIRE USB Interface II
package which included the cable.
The cable's still avaailable, though ... (:-))
Ken Kopp - K0PP
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
of the desk with 1/4" brass bolts with wing-nuts
for each piece of equipment.
I'm retired from an electric utility.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qt
In Canada it's not unusual to see rural distribution lines
that have only one conductor on the poles. They use
"earth" for the other half of the circuit, as in old US rural
phone lines.
Ken K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qt
can confirm
my suspicion?
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.
I'm one of those who is VERY glad we can keep
our call when moving! (:-))
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subsc
On the other hand ...
I always sign /7 in contests because "7's"
are usually more "needed" than "0's".
Ken K0PP/7
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
I'll wager rumor control is virtually a full time job in Aptos ...
Ken Kopp - K0PP
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
Scalping a K3 ? (:-))
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.
Would have been better if we'd been alerted of the
"removal" of the DSP NR ...
I spent a number of hours of my time and that of
others pushing on that rope. (:-((
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecra
FWIW, mine (S/N 56) ordered as a K3/100
came with a jumper board.
And no protective film on the display.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
Hello Brett,
"... and I can get one real time" ... I suspect you'll be waiting
quite a long while
I knew there were things about the radio waiting in the wings.
It's of little matter ... to most of us. As someone else has
said ... it's likely not to ever be "finished". Hey, getting "
Could this account for the "Intel Hex file ran out of bytes before Intel
End file record was read" -and- "Intel Hex Read error: Expected start
characher ":" not found" messages when attempting (unsuccessfully)
to load the new upgrade into my K3?
73! Ke
Ed,
Of course you're gonna limit yourself to the same price range
as the K3 you had ordered in your shopping . a classic
"shoot yourself in the foot" move ... sad.
Regardless of the money you spend you still won't own the
unquestioned best.
I had an FT-1000D, an FT-990 and an IC-756 PR
While not a "Phillips" screwdriver, those made
for "Posidriv" screws are better for "Phillips" screws.
Yes, I'm well-aware of the difference in the two ...
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
__
It's actually "Pozidriv" ...
Ken - K0PP
- Original Message -----
From: Ken Kopp
To: elecraft@mailman.qth.net
Sent: Sunday, 09 December, 2007 21:49
Subject: Better drivers for "Phillips" screws
While not a "Phillips" screwdriver, those made
f
ually, the radio) has switched through five filters.
There is -NO- ringing. Impressive!
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
It's probably just my Old Poop's ears, Bill.
The point is that the transition through the
filters ... and the DSP ... from 6 kHz to 50 Hz
is seamless and smooth.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft ma
Maybe this is the first after market mod to a K3. (:-))
Ken Kopp - K0PP
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
ht
Craig,
The Oak Hills part number is OP-SB2 and there
are two sets in the pack for $7.50. The metal work
is very good, and the pins are gold plated.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to
the caps, but a plumbing supply house
will have them.
Cut a suitable hole in the surface of the cap with scissors
and mount the fan with screws, lockwashers and nuts, just
as you would on a metal surface.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[
nge or red paper about the potential for scratching atop
the key in every box they package.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the
John,
Now there's an item I haven't heard in decades!
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub e
As did I ... Sold my FT-1000D, FT-990 and IC-756 Pro II
wituin a few days of each other.
I have no regrets! (:-))
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or [EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
ay last summer. One straight
key brought $1301 !!
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, su
don't know of a
legitimate reason for a K3 to transmit on 27 Mhz anywhere
in the world.
Say it isn't so, please
Ken Kopp - K0PP
[EMAIL PROTECTED]
- Original Message -
From: Eric Swartz - WA6HHQ, Elecraft
To: David Ferrington, M0XDF
Cc: Elecraft Reflector
Sent: Wednesd
cates that it only blocks "high power TX
in the CB band".
I'm guilty of taking your posting literally, and from reading the reply
postings I'm not the only one who assumes the K3 will transmit on
27 mHz.
After the fact, I -DID- check mine ... it doesn't. (:-))
73
Don't forget the hundreds (thousands?) of "loose
cannon" ionospheric sounders ... (;-))
73! Ken Kopp -K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to p
best of
both worlds.
I also have a ProSet with an HC-5 cartridge.
73! Ken Kopp - K0PP
K2 #5665
K3 #56
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
S
"One stop shopping", as in WalMart.
All your needs (wants?) under one roof.
One phone call.
One credit card bill.
Elecraft "logo'ed" items, as with the HexKey.
Known to "work" with Elecraft products, W/O "adaptations".
Support f
An alternate stand is available for the K2, so perhaps
the same will be true for the K3 ... after the dust settles.
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
no problems ... she forgets
she's wearing them ... but she's back to her normal voice
level. (:-))
They use DSP, a programmable 5-band equalizer, auto
adjust levels, etc. They "remember" a number of days of
levels in the event an adjustment is needed. Really neat
technology
Something must be wrong ...
Mine are ... for all practical purposes ... silent.
The only way I can tell they're operating is to
reach behind and feel moving air.
Ended with a couple of extra screws and washers.
Ken Kopp - K0PP
K3 #56
___
Ele
It's apparently made by Brian Wood, W0DZ in
Loveland, CO. Looked up info in Buckmaster.
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
It's apparently made by Brian Wood, W0DZ in
Loveland, CO. Looked up info in Buckmaster.
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
DZKit About Us
To: Ken Kopp
Sent: Sunday, 30 December, 2007 18:04
Subject: Re: Emailing: DZKit About Us
Hi Ken,
This is Brian Wood's company. His call is W0DZ and he has been working
on
this kit for several years. He is a one person operation. You may recall
Brian
was on the front cov
But, not everyone uses a logging program ...
Or ..., if they do ... use it to key their radio.
I have a logging program, but I don't use it
to key my radio(s).
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.ne
Displayed OK here
HAPPY NEW YEAR, one and all
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
feature. Enter
the make/model of what you want to check on. You
can look at currently active offerings or at sales history
for the past 90 days.
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
on the
metal-to-metal contact areas inside the cabinet.
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth
ire feeder portion of the antenna and a balun at/in
the (required) tuner.
Some years ago the "Carolina Windom" had the same
sort of following
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecra
A K2
K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/sub
I believe there used to be a source of radio covers shown on the
Elecraft site, but I don't see it now. Can anyone shed light on this?
My Lady ... Rose, N7HKW ... has made several covers for my
K2 and K3 and we wonder if there's a market for them? She
already has orders from local friends. I
I believe there used to be a source of radio covers shown on the
Elecraft site, but I don't see it now. Can anyone shed light on this?
My Lady ... Rose, N7HKW ... has made several covers for my
K2 and K3 and we wonder if there's a market for them? She
already has several orderes from local fr
Nothing from the reflector for several hours ... unusual.
Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
Bill,
My Lady and I are serious half-time RV'ers and I've had
very good results with my K2 into a modified High Sierra
screwdriver on a 5th-wheel Holiday Rambler.
I'll send you photos. It's also pictured on K0BG's mobile
site.
73! Ken Kopp - K0PP
[EMAIL PROTE
Does anyone recognize the small keyboard shown
in the recent Yaesu ads?
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
was the level lowered? Had it
been left alone, more users could find "just right" level.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
K3
covers. Some have already inquired, and should have
received a reply. If you want more info please send a
note to [EMAIL PROTECTED] .
We'll keep such "commercial" traffic like this to a minimum,
BTW.
73!
Ken Kopp - K0PP
[EMAIL PROTECTED]
Rose Kopp
Autocheck? There ARE still some who are "dial-up" only. (:-))
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
quency is. (:-))
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
Ron D'Eau Claire wrote:
For me it's not like doing "sort of" RIT with the big knob, it makes
RIT
unnecessary.
Same here. Now if Elecraft would just assign the RIT knob to the Main
knob,
when both Lock and RIT are enab
Great to be the first QSO for K3 #195 a few minutes ago!
Enjoy, Don!
73! Ken Kopp - K0PP
K3 #56
K2 #5665
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
n CW.
If you're considering an SGC look carefully at the ratings,
regardless of model. Their ratings are for SSB.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Bill,
I've replied to your messages, but my messages
are being rejected by yahoo.
Do you have another address I can use?
Rose Kopp - N7HKW
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must b
If you have requested information on my K1, K2 and K3
covers and -NOT- received a reply, please let me know.
There may be a problem with my incoming server related
to the address [EMAIL PROTECTED] , as I've attached
read receipt requests and not received any.
Rose Kopp - N7HKW
[EMAIL PROTECTED
For us stuck with dial-up service the -IS- no answer. (:-(
15 Meg would take hours
73! Ken - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
paper, unlike the sturdy brown wrapping paper that protected the
rest of the metal parts. I wonder if this was the case with your
screen/shield?
A 'phone call brought me a quick replacement. (:-))
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL
Ah Ha! This explains the "sloppy" fit ....
73! Ken Kopp - K0PP
Alan -
I have used PSK31, MFSK16 and RTTY using Hamscope with no problems.
However, the rear panel LINE IN (mono) and LINE OUT (stereo) jacks are
3.5mm, NOT the old trusty 1/8 inch (they are slightly larger). I
init
avoid
exceeding their antenna's bandwidth.
Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinf
I apologize for the bandwidth, Elecrafters ...
Larry, e-mail to your embarqmail.com address is being refused.
I've tried multiple times to respond to your inquiry about my
Elecraft covers.
Do you have another address? Or, my phone number is 406.560.3738
73! Rose Kopp - N7HKW
[EMAIL PROTE
Nicely said, Tom.
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
My apology for the bandwidth, but ...
We've just discovered (tonight, Friday) that there were
52 (!) messages waiting on our ISP that were addressed to
[EMAIL PROTECTED] . Some were over a week old!
All have now been received and responded to. If you still
haven't received a reply to an ea
Pete, my replies to you are bouncing. Please call me
@ 406.560.3738 or send me another e-mail address.
73! Rose Kopp - N7HKW
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
Hi "DW",
I have the KDSP USB cable that Elecraft sells for
use with the K3, and it works well.
Like you, I have nothing with a serial port.....
73! Ken Kopp
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing li
Julian,
I have a Heil TB-1 for my Goldline. I -think- it
meets your needs if I read you correctly.
The K3 is configured for Kenwood mics, so a
Heil "Kenwood" cable should do the trick.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
___
Elecraft ma
Nice posting, Don! (:-))
Lisa in an Elecraft sweatshirt oh my!
Isn't she a joy!
Take note, guys ... Lisa called him on a SUNDAY!
This alone says volumes about the folks in Aptos ...
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROT
h an "issue".
She did. She would have helped anyway, but sent her a BIG Hershey's
chocolate kiss "thank you" ... bought by my wife. (:-))
Humor is good for the soul ...
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to:
Hello Al,
Mine works well on the BC band ...
Remember, a KBPF3 general coverage filter
is needed for out-of-hamband coverage.
73! Ken Kopp - K0PP
K3 #56
K2 #5665
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
AES stocks the Kent Paddles, but dunno if they also
stock the kit.
Nice paddles.
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
I'm reviewing my soon-to-be-shipped K3 order and want to be
sure I understand the KUSB line item correctly.
Is the KUSB a USB cable to go from the K3 to my computer's
USB port or is it an internal module for which I will need to supply
cable for the K3 to computer conection?
Ken K
There is/was one in central Puerto Rico ... flew over it on
way to DX-pedition on Desecheo Island (KP5) a few years ago.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
This from career AF pilot friend ... with a touch of tongue-in-cheek
humor
73! Ken Kopp - K0PP
From: Harold E. Johnson
To: Ken Kopp
Sent: Sunday, December 03, 2006 12:22 AM
Subject: Re: TACAN
Is it true that 0 degrees in TACAN is east, rather than north? If so,
is there a simple
Many small rice-box rigs have carry handles on one end/side.
Buy one as a replacement part ... and don't forget the mounting
hardware.
Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Ele
nomy installation in the mountains
west of Boulder, where we operated the western hemisphere's largest
solar interfermeter, with antennas a mile apart.
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
1 - 100 of 840 matches
Mail list logo
