A complete manual comes with the K3.
After orientation and familiarization
with the rig, it seems to me only a few
pages would be needed for reference,
like pages 49-53 and maybe 5-6. No big
deal to print 7 pages.
GL to all.
de Joe, aa4nn (2nd run factory asmby
The K3 Manual has been flogged.
The RS232 cable has been whipped.
What's next, fellers?
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsu
I have used the K2 PA Key Out to key the THP HFK1.5, no problem at all and
expect the K3 to have a similar key out feature
de Joe, aa4nn
: [Elecraft] Re: K3 - keying an amp
>
>"Still wondering about the TXInhibit feature though and whether (A) it's
>a normal feature of most
Are you psyche, Ed? Did you confirm
with Lisa she was holding K3 #66?
de Joe, aa4nn
-Original Message-
>From: Ed K1EP <[EMAIL PROTECTED]>
>I guess many of you were wondering, where in the world did that box end up
>that Lisa was holding last Tuesday. I am really surpr
Go to http://www.eham.net/reviews/detail/6673
for K3 reviews.
de Joe, aa4nn
-Original Message-
>From: KU4YP <[EMAIL PROTECTED]>
>I have recently finished my K2 and was wanting to hear from the K3 three
> owners, prospective and actual, of how th
for the way Winkey detected a
paddle closure. This is not a problem with the WinkeyUSB keyer.
Begali offers a kit, I think, that will fix the contact problem.
de Joe, aa4nn
From: "Vic K2VCO" <[EMAIL PROTECTED]>>
If the 'regular' contacts are the same as what was
No one disagrees with Elecraft priorities and the want for a quality product.
The issue was
and remains to be the want for more information about what's happening at Aptos
and the
seemingly unpredictable delivery schedules.
de Joe,
minute. Does the act of putting in a specific filter tell DSP
what compensation to do OR must we dumb operators try to
guess at what compensation number to enter? And how would
that number be entered?
de Joe , aa4nn
___
Elecraft mailing list
Post to
u and a quite difficult
one at that.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/ele
n't a whole lot of difference
between them.
** unless you are comparing a Heath AR-2 or 3 to a K2! **
I can tell you after 8 DXpeditions using the K2 and then going
to Scarborough Reef with IC7000s, there really is a difference.
de Joe, aa4nn
__
internals of any radio. It could be crystal filters
versus
DSP filters, single conversion versus n conversions. I like 500Hz filters
in pileups where the K2 gives clean signals and IC7000 gives not so clean.
de Joe, aa4nn
On Mon, 2007-11-05 at 12:57 -0500, Joe-aa4nn wrote:
> David Pr
Yeah, Dave, you have too much time on your hands.
de Joe, aa4nn
- Original Message -
From: "David Yarnes" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, November 13, 2007 5:58 PM
Subject: [Elecraft] Ode To My Phantom K3
I'm awfully wound up and in deepest distress
feedline and
give it another go.
You don't want to connect balanced line directly to KAT2.
73 & gl,
de Joe, aa4nn
- Original Message -
From: "Peter Wollan" <[EMAIL PROTECTED]>
To:
Sent: Friday, November 16, 2007 9:50 AM
Subject: [Elecraft] Re: KAT100 with Ladder Lin
u are in business.
With the phased verticals you can selectively switch for end fire
in either direction in line with the verticals, plus you can switch
select to transmit broadside to the two elements. Amazing results.
Excellent front-to-back as well.
de Joe, aa4nn
- Original Message -
t #12 wire. Use a band saw, scroll
saw or hand held saber saw. After inserting the wire in the PVC,
put a dab of Marine Glue and Sealant on there, or other quick drying
adhesive.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.ne
Their statment should steer you clear away from
considering the Plantronics Gamecon headset.
de Joe, aa4nn
SNIP
"The .Audio 350 is a modern equivalent to the old GameCom 1; the two
headsets have comparable specifications however neither of these products
are radio headsets. We do not rat
keying line to the K2 is activated.
I have also used the PA Key out from K2 to a PTT
input on some amps, like Tokyo Hi-Power. Works
de Joe, aa4nn
-Tec Centurion and Ten-Tec Centaur have two options for
inter-connection first is the single control T/R line but that won't
support QSK (at
thout bending or otherwise making
a mess of things. But there will be some tuning and aligning to
keep it all interesting. You'll be proud you did!
de Joe, aa4nn
I'm curious, I've never had to deal with moduler kits before. waht's
involved in putting them together? the most I
tor anyway.
de Joe, aa4nn
- Original Message -
From: "Dave Martin" <[EMAIL PROTECTED]>
To: "Chuck Catledge" <[EMAIL PROTECTED]>
Cc:
Sent: Tuesday, November 27, 2007 3:35 PM
Subject: Re: [Elecraft] K3: Firmware Utility Errors
On Nov 27, 2007 3:23 PM, Chuck
anyway.
de Joe, aa4nn
I understand your point, Joe. OTOH, as a reflector subscriber, I am happy
to see posts, and answers, to questions such as this. They are often of
use
to other subscribers which wouldn't happen with a direct Elecraft support
email. Also, other users may have the ans
>Does that requirement exist for home built equipment? Surely you could
>argue that the K3 is something you built yourself.
>
As pretty and sophisticated as the K3 is...I rather doubt
the slickest car salesman could convince an authority that
the radio was a home built on
Right on, Don.
The amp must protect itself by itself and for itself.
Like Overdrive, High SWR, Hi drain current, ad infinitum.
Modern SS amplifiers all have this built in protection.
Like many, I have never used ALC, being CW only, but I
take care of drive power to protect the amplifier.
de Joe
You will need a separate cable between LPT port
and Key-in to the K2. Set INP to Hand. Wire
your favorite keyer output in parallel with the line
into the K2 Key-in.
de Joe, aa4nn
- Original Message -
From: "David Wilburn" <[EMAIL PROTECTED]>
To: "elecraft"
John,
Have you tried the following?
Go into Primary Menu and select Set (tone) Level, ST L
Tap the display...your tone should come back.
73, Joe, aa4nn
- Original Message -
From: "John" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, December 05, 2007 12:55 PM
Subject: [E
good looking package.
You can sell off the KIO2 and KAT2, they are excess now.
de Joe, aa4nn
- Original Message -
From: "n0jrn" <[EMAIL PROTECTED]>
> OK gang:
I've about finished the build on my K2. As I look forward and
consider
the options I'v
OH if you have the bux, go for it all.
de Joe, aa4nn
- Original Message -
From: "Mike Geddes" <[EMAIL PROTECTED]>
To: "Elecraft"
Sent: Monday, December 10, 2007 12:13 PM
Subject: [Elecraft] Recommended K3/100 filters
My K3/100 has been on order for a couple of w
Not me, I am CW only and never get above 28.050mHz.
de Joe, aa4nn
!
> Whatever happened to minding your own business. If Joe wants to open his
> radio to all freqs so be it. Maybe he has a good reason. Does it affect
> anyone
If you have DSP enabled for SSB,
you might turn it off. DSP can often
make your radio dead as a doornail.
de Joe, aa4nn
I am trying to receive on an early K2, and it has been several years since
I
have used one. For some reason, I can only copy ssb when c mode is
displayed?? When displayed
der joints showing up later and especially
after being bumped and smacked around in the luggage.
Plus, at the zero hour we ordered a bunch of upgraded
chips which were to be installed while convening in Fiji
Islands. Lots of new things from Elecraft yet the K2s
performed perfectly and it was all just amazi
Benny, it's just the turn of a pot!
How difficult or inconvenient could that be. hi
de Joe, aa4nn
- Original Message -
From: "Benny Aumala" <[EMAIL PROTECTED]>
Maybe my interest to QRP is partially because K2.
I want to use my K3/100 still quite a lot in QRP an
I have a May 22nd order with deposit. I must be about 40db down.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Or the faster you spin the knob the larger the stepping increment.
de Joe, aa4nn
- Original Message -
From: "David Ferrington, M0XDF" <[EMAIL PROTECTED]>
I's been suggested to me by someone not on this reflector (shame), that
the
power control should perhaps be
aaah yes, AFX, Audio Factitious Extraordinaire
de Joe, aa4nn
---
Yes, I just leave AFX on all the time - in fact, I guess that's one
function
that could be put int the MAIN menu and the button freed up for something
else.
when I hit the AFX button just to see
I revised my order to eliminate the KRX3.
Added an additional filter to the order.
de Joe,. aa4nn
should cancel their orders forthwith. I know I
would.
Good try Garry buddy - if nnnyyy it was that
easy. !!!
___
Elecraft mailing list
Post
Over the phone a gentleman should never ask a lady what she was wearing.
de Joe, aa4nn
- Original Message -
From: <[EMAIL PROTECTED]>
I have received an eMails from Lisa a few Sundays ago regaridng my order.
It was a pleasent surprise. Of course I never asked her what she was
w
Well, David, I'm sure you can get it all figured out in due time.
de Joe, aa4nn
- Original Message -
From: "David Ferrington, M0XDF" <[EMAIL PROTECTED]>
I think I'd like the option of being able to tune VFO B (sub-Rx when I get
it) on VFO A, but still stay i
I suppose, but would appreciate some tips here.
de Joe, aa4nn
__,_._,___
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.n
ee if you will. I'll be running
some tests with my buddies soon.
Thanks for all the help from a terrific group.
73, Joe, aa4nn
See page 18 of
<http://www.elecraft.com/manual/KSB2%20manual%20rev%20E.pdf>.
vy 73 de toby
___
Elecraft mail
Go to: http://n1mm.com/
and download the full version 7.0 and with it you
get a really good standalone grayline program.
While you are at it, n1mm is an excellent contest
logger. Give it a go.
de Joe, aa4nn
- Original Message -
From: "Robert 'RC' Conley" <
How soon we forget! All the crying and moaning about
the screws in the K2 and why in the world didn't Elecraft
countersink those screws. You guys are just too much!
de Joe, aa4nn
---
In a recent message, Brett Howard &l
than individual letters. I
recognize syllables in long words and fit them together much like in early
learning where I would fit individual letters into a word. My scrolling
window somewhere along the way simply disappeared.
73, Joe, aa4nn
>However, the real question is should I
>"visuali
Hi Bob,
Most CW keying lines from PC to rig use LPT1 but COM port also works. Here
are two examples for keying lines.
http://www.n3fjp.com/when there, click on CW-PC Interface
http://k1ea.com/hints/lpt.htm
73, Joe, aa4nn
- Original Message -
From: Robert McGwier
To: Elecraft Mail
The AF pot from Elecraft parts department costs $1.00. Jump on it.
de Joe, aa4nn
--
K2 #2636 has finally developed enough irregular operation of the audio gain
pot that I'll be doing the AF gain pot mod soon. It's become so erratic
that I'm wondering if I
What's wrong with simply holding the diode body
between thumb and forefinger and bending the lead
against your thumbnail?
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subsc
support an antenna, so
you carry your own fiberglass poles. I worked many, many stateside and EU
stations with this portable antenna.
73, de Joe, aa4nn
I recently built an 80/40 meter half-wave dipole using
itself.
73,
Joe, aa4nn
Question. Do you use a BALUN before the tuner? or does the K2 'float'
between the two antenna halves - connecting one side to the K2 antenna hot
lead and
through my
checked baggage where among other radio things I had 9 single band filters.
After checking 7 of them he gave up. For checked baggage I use a hard sided
golf bag for antennas and all manner of paraphernalia. Except for my K2
which I carry-on in a back pack.
de Joe, aa4nn
Please let's not let this become an off-topic thread.
de Joe, aa4nn
--
- Original Message -
From: Brent Sutphin WB4X
To: elecraft@mailman.qth.net ; [EMAIL PROTECTED]
Sent: Sunday, July 11, 2004 10:54 AM
Subject: [Elecraft] Log Book o
Pink Floyd, "A Momentary Lapse of Reason" also CCR
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.n
Hi Doug & all,
I used a doublet (center fed zepp) with 22 feet on each horizontal side then
a 44 foot piece of 300 ohm TV lead back to the tuner. In my case the tuner
was the KAT100 which tuned this doublet 1.1 to 1, 40m to 10m. Good luck &
73.
de Jo
Hi Lynn,
Stateside QSL cards from T33C are beginning to hit the mail over past few
weeks.
73, Joe, aa4nn
T33C team member, aka T33NN
- Original Message -
From: "Cherie and Lynn Hammond" <[EMAIL PROTECTED]>
To:
Sent: Sunday, August 22, 2004 11:26 AM
Subject: [Elecraft] T3
. While these poles will hold up a wire it's
too bad they aren't strong enough for surf fishing during a time when the
bands might be closed.
73, Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
You can order from Elecraft. 78M05, part number E600024
de Joe, aa4nn
> But, I need to find an LM7805 in the small wee package the comes
> with the K2s. I have been to Mouse and all they have
> is the TO-220 at 1A. Don't need that...just the small we packaged one.
> Wher
OOPS Correction.
E600024 is a TO-220
78L05 is like a TO-92, number E600029 5-volt, 100ma
---
> You can order from Elecraft. 78M05, part number E600024
> de Joe, aa4nn
>
> > But, I need to find an LM7805 in the small wee pa
Before you do anything drastic,
make sure your DSP unit is bypassed.
Inadvertent DSP triggering can make you
think the receiver is dead.
de Joe, aa4nn
- Original Message -
From: "john" <[EMAIL PROTECTED]>
To:
Sent: Saturday, December 16, 2006 9:13 AM
Subject: [Elecra
If I say Shurr Profi II like new for $275.00 is that big bux?
Plus $10 shipping to lower 48. Sorry, no original box.
Pix on request.
de Joe, aa4nn
1.. Happy Holidays to all.. Been thinking about purchasing a new paddle.
think I
You'll need the K2/100, of course.
Then you key the amp with the PA Key out (RCA Jack)
connection on the rear panel of the KPA100. Easy.
de Joe, aa4nn
- Original Message -
From: "William Langford" <[EMAIL PROTECTED]>
If I build the K2, how could I key my Amer
I suppose when I had the Ngen connected to the QRP K2
and accidentally pushed the MSG button causing some CW
to be sent means I fried the Ngen circuit. no?
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
While I like my Edsyn 951SX bought on special sale, now a bit pricey,
I think most Weller or Hakko are excellent.
Eg., Hakko model 936-11 is $89.98 at Tequipment
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
Fred, you're gonna need the KPA100 to drive the Elecraft amplifier(s).
de Joe, aa4nn
- Original Message -
From: "Fred (FL)" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, February 27, 2007 5:40 PM
Subject: [Elecraft] New Elecraft Amp(s) - with bare K2?
Will th
So you put 10 watts in and get ~400 watts out!
You put in 50 watts and get 2000 watts out
Where's the rub?
de Joe, aa4nn
--
- SNIP -
My barefoot K2 can drive both my ICPW-1 and Quadra System to 350-400
watts. Therefore, the forthc
No less than three Ops on Pratas Island, BQ9P, where we used
paper logging, turned my paddle around as you mentioned. At
the time I thought there should be a better way.
de Joe, aa4nn
A related item ... in the pre-computer logging days of contesting one
could quickly learn left-hand sending by
Put the RANT ON function
under one of the PF keys to
quickly switch it on and off.
de Joe, aa4nn
- Original Message -
From: "Jim Miller" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc:
Sent: Sunday, April 08, 2007 11:32 PM
Subject: Re: [Elecraft] RxAnt?
excelle
Not insane maybe, but 30 years tending a lighthouse, the light
and intermittent fog horn never bothered the old man keeper,
until early one morning the fog horn failed to sound off... the old
man woke up with a start and wondered "What was that?"
de Joe, aa4nn
awareness of lighthou
I've found it at Lowe's
de Joe, aa4nn
- Original Message -
From: "Jesse & Nicky" <[EMAIL PROTECTED]>
To:
Sent: Saturday, April 14, 2007 6:58 PM
Subject: [Elecraft] 3m or scotch 70 tape
Hi guys/gals -I am bldg away at my k2-100. I am doing align and tes
Could this be they?
de Joe, aa4nn
Blue:.022ufd 1ea.
Yellow: .1ufd 1ea. (Ct)
Pink:.1ufd 3ea.
Green: .33ufd1ea.
Resistors are marked as:
0= 0 * K2 Install only
332 = 3.3k * K1 & KX1 select
682 = 6.8k * K1 & KX1 select
113 = 11k * PLL
I wrapped my fingers around the Elecraft BL1 balun to see if it
was getting warm while transmitting... duh... 100+ RF Watts.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
Have you tried the PA Key Out line to your amp??
Or maybe the PA Key Out is only on the KPA100 module
and not on the basic K2.
de Joe, aa4nn
- Original Message -
From: <[EMAIL PROTECTED]>
To:
Sent: Monday, January 09, 2006 12:24 PM
Subject: [Elecraft] K2 relay circuit?
Does an
>> The "shave and a haircut" business started in the 1950's, and generally
>> indicated that the user was a lid.
>How things changenow it's a contest or something like that.
--
More about the Barbershop Contest at:
http://www.io.com/~n5fc/barbershop_contest.htm
Lots of K2s and K1s
Considering the superb mechanical engineering of the K2,
one has to wonder why chassis screws aren't countersunk.
de Joe, aa4nn
---
I may have to order up a bag or two
of the flat-head screws, and countersink all the holes on the to
Hi Jonathan,
I had pretty much the same problem with 20 and 30.
While I pride myself on good soldering techniques, it
was a poor solder job in the band pass filter for 20m/30m.
Pay close attention to those components.
73, Joe, aa4nn
--
I have just finished my
Check out the BK 2707A which has exceptional
features/capabilities; too many to mention here,
for around $80USD. Used here for 3+ years.
de Joe, aa4nn
-
Have been lurking here for a while soaking up some wisdom in anticipation of
receipt of my K2
Unless you listen pretty far down, someone's broadbanded signal
is going to cover up your transmit frequency.
de Joe, aa4nn
2. I moved my RIT control around some. I liked to listen below my
sending frequency as most listen
Both stereo plugs are 3.5mm. If it were me I would make
a keying lead from my keyer to the 3.5 plug rather than use
a Shadiorack adapter... You don't want too much weight
and tension hanging off the back of the K2's keyer jack.
If your Sennheiser has 3.5mm plug, plug it in.
de
.
Also very effective is a single wire dipole, 33 ft on a side,
fed with 300ohm tv lead via Elecraft BL1 4:1 150w balun.
Good luck,
73 de Joe, aa4nn
>Gents,
>I have a KX1 which I want to take with me on a trip to Phoenix, AZ in early
>March. I wonder if there is anyone out there
allow audio to the speaker with the plug removed.
Well, durn, my speaker doesn't play when I unplug the headsets.
I have been putting off debugging the problem, so now I may have
the answer.
73, Joe, aa4nn
___
Elecraft mailing list
Post to: El
Or fold the ends back toward the feedpoint. Make yourself
a linear loaded dipole that way. Feed in center with 450 ohm
twin lead. A starting point for length of wire, including the folded
back part, around 66 feet (33 ft each side).
de Joe, aa4nn
If you include the extremities plus finger dimple,
it is more like 10 inches front to back.
Do the K2 dimensions (7.8 x 8.2 x 2.9) include the knobs, rear BNC
connectors,
and rubber feet?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
I have used the Astron SS-25 for several years,
K2 panel says voltage 13.8, close enough.
Is there an issue with this ??
de Joe, aa4nn
---
I recently purchased an Astron SS-30 power supply for use with my K2 &
internal battery and/or K2/100 configuration. I need to know if there
ain't that much.
de Joe, aa4nn
-
Hi All,
I am considering using my T1 to tune a couple of attic antennas, a 40 mtr
dipole with drooping ends, and a horizontal loop of about 130 feet total
length, as close to the feed point of each antenna as possible to r
In a significant way, Elecraft sponsored all K2/100s
for the Banaba DXpedition, XY3C in 2004, of which
I was a part.
de Joe, aa4nn
I'm not sure how many here have noticed
but Elecraft will be a corporate sponsor of the upcoming
VP6DX operation in February 2008, including seven K3
No problems with Astron SS-25M used with K2/100 months and months.
de Joe, aa4nn
- Original Message -
From: "Solosko, Robert B (Bob)" <[EMAIL PROTECTED]>
To:
Sent: Friday, May 25, 2007 10:04 AM
Subject: [Elecraft] Switching Power Supply Recommendations Wanted
Hi Elec
amp;P,
well, what's QSK got to do with all that?
de Joe, aa4nn
I can't imagine the nerve-
wracking, mind-numbing use of full break-in for a contest!
I can - I've done it. I'm not a big-gun contester by any means, and do a
lot
more H&P than running a freq.
I found it g
ng it possible to hear a
movie sound track without cranking up excessive volume.
At BS7H we also had some Bose noise cancelling headsets.
I thought the Bose was a bit better at eliminating generator
noise. Sony NC50 ~$100, Bose ~$300.
de Joe, aa4nn
___
This is not even funny!
de Joe, aa4nn
- Original Message -
From: "Darwin, Keith" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, June 05, 2007 10:35 AM
Subject: RE: [Elecraft] popular rig WOW
Here's a thought. Elecraft scores a hit with the K3, appealing to the
general
It is a simple answer, really. A factory built K3 and you're all set.
de Joe, aa4nn
- Original Message -
From: "John Tobias Croteau" <[EMAIL PROTECTED]>
To:
Sent: Saturday, June 30, 2007 8:23 PM
Subject: [Elecraft] K2 or K3
As some of you know, I'
Drive power for the Expert 1K-FA amplifier
is "Typically 20W" for full output. Typically.
I would think it ambitious to expect full output
with just 20 watts drive. Just my opinion.
de Joe, aa4nn
.
- Original Message -
From: "Dale Parfitt" <[EMAIL PROTECTED]>
If they don't want us to drive us fast, why do they make such cars? And why
do the speedometers go up so high?<<
Maybe the high numbers are to accomodate conversion to Kilometers/hour
de Joe, aa4nn
___
Elecraft mailing list
Post t
I have put 300 watts from a single 813
grounded grid amp into a doublet made
using 300 ohm twin lead. No problem.
de Joe, aa4nn
- Original Message -
From: "Thom LaCosta" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, August 14, 2007 7:26 AM
Subject: [Elecraft] Twin Lead feedl
Egg cartons for trays
de Joe, aa4nn
You can get ice cube trays at the Dollar General Storeor other small
plastic containers as well.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
Hello All de Joe, AA4NN, in SC near Charlotte, NC.
I will be one of the foxes Aug 16th along with Dale, WC7S,
calling CQ FOX between 14050 and 14070 from 0100 to
0230 UTC. My listening offset will be 1khz, UP or DN,
from my transmit frequency as I will indicate (UP or DN.)
During the last 30
The IC7000 display would pretty much blank out due
to the sun at Scarborough Reef. The display itself
was not all that attractive to me. I longed for my K2
and wished the K3 could have been there.
de Joe, aa4nn
Not all displays are created equal
You've gotta pay attention. hahahaha
The field checkers have the low serial
numbers, at least up to serial #008.
de Joe, aa4nn
By any chance may I request the first one off the
line, serial number 01?
___
Elecraft mailing list
Po
I asked a wisened ham about voice guys striving for that perfect mic
for the perfect sound and then you see CW guys with a shelf filled
with keys, each key used at different times and why is that, to which
he replied, 'quite simple, one voice, ten fingers.'
de Joe, aa4nn
You guys c
Hello QRPers,
Tonight I am your Crewcut Barber in the contest, running 1 watt from a K2.
from 0100Z to 0130Z I will be around 14.060, SteppIR 4-element lowered to 40ft
from 0130Z to 0230z I will be around 7.030, Force12 2-element lowered to 50ft
from 0230Z to 0229Z I will be around 3.560, folde
Hello QRPers,
Here is the results of the crew cuts from your QRPp barber running with a
1 watt K2 from Lake Wylie, SC, as K5ESE (aka Joe, aa4nn)
I had my doubts about spending 30 minutes on 20m due to my experience of
late working the 20m Fox Hunts on Thursday evenings. Anyway, there I was
Maybe a room on the south side.
The biferglass crappie pole is a good idea.
de Joe, aa4nn
My wife is attending a conference in Chicago in
a couple of weeks and I'm going with. When she booked the hotel, I just
asked that we get a room as high as possible. I'm not sure what w
Yeah, and the IC7000 is hardly any better.
de Joe, aa4nn
Gee, I pray it's -NOT- the IC-706 of the 21st century.
The '706 is an ho-hum radio for the casual operator ... maybe. (;-(
73! Ken Kopp - K0PP
___
Elecraft mailing list
Post to
Well, now, when is a door not a door?
Of course, when it is a jar.
de Joe, aa4nn
-
The SCG tuner will tune balanced aerial systems but is not AFAIK a
balanced tuner.
___
Elecraft mailing list
Post to
It's not the reduction in finger movement that is at stake here,
rather what the "keying mode" does when you let up on a
closure.
de Joe, aa4nn
For the life of me, I can't see the practical difference. I
understand the difference, but comparing iambic to utlimatic, I see
1 - 100 of 180 matches
Mail list logo
