Just in case you guys wonder where this stuff came from, it was used to
hold up military camouflage netting. Those paddle base plates really aren't
base plates, they were used at the top of the mast sections to keep it from
tearing through the netting.
This stuff takes a little getting used to a
supply worked nicely for running the K2 and keeping
it's internal battery charged by setting the voltage to 14.5 (well within
it's range).
Both supplies have external terminal strips for AC in and DC out.
Anyone interested, contact me off list - [EMAIL PROTECTED]
Jim Sheldon, W0EB
to the bench.
73 all,
Jim Sheldon, W0EB
Wichita, KS
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/elecraft
You must subscribe to post.
Subscriber Info (Addr. Change, Unsub etc):
http
K2 #4338 coming to life nicely. Just finished the initial alignment and it's
hearing all sorts of stuff on 40 meters right now.
Back to the bench for final assembly.
Jim, W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
http://mailman.
80 meters was a
different story, and with the K2, I worked everyone I
called, using the same inverted L. Had about a page (30) 80 meter contacts.
Jim Sheldon, W0EB
K2# 4338
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Robert McGwier
>
on the AMQRP website www.amqrp.org
under the "Projects" tab and listed as the KA5DVS PAC-12 antenna.
Jim Sheldon, W0EB
K2 #4338
> Bob Nielsen wrote:
>
> >On Fri, Jul 02, 2004 at 08:30:15PM -0400, Jimmy Lee wrote:
> >
> >
> >>What antenna do you use f
Don't forget that the monthly FPQRP "Run For The Bacon" sprint is
tonight! It runs from 0100 to 0300 UTC, which for the UTC Challenged
among us, is: 6pm Pacific time, 7pm Mountain time, 8pm Central time and
9pm Eastern time. It runs for 2 hours. See the FP website at
www.fpqrp.com and click on
there. It would be nice to have examples of the K2/100, K1 and KX1
there if at all possible.
Jim Sheldon, W0EB
K2 #4338
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. C
s except for the BNC input connector and the 3 pin output header
(user supplied). I'll build it for you for an additional $5.00 The NorCal
dummy load is still available from them. See www.norcalqrp.org for those
details.
Interested parties email me off list please.
I'll take cash, c
The N-Gen & dummy load have been spoken for,
Thanks to all that inquired.
73, Happy Holidays
Jim - W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
yone interested reply off list to [EMAIL PROTECTED]
Jim Sheldon, W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/m
I'm asking $700 shipped anywhere in the US (can't export it), but the price
is somewhat negotiable.
Anyone seriously interested please contact me off the reflector.
Jim Sheldon, W0EB
Wichita, KS
[EMAIL PROTECTED]
316-744-3022
___
Elecraft
For sale: Vibroplex model "Original Deluxe" with serial # in the 200,000's
that dates it to 1962. It is in very good condition and a well constructed
homebrew felt lined wooden carrying case is included. Asking $125.00
shipped to anywhere in the US. Outside the US will require extra postage
and
The key has been sold. - Going to KH6 land.
W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
Y
sking $230 shipped anywhere in the US.
Interested parties please contact me off the reflector.
Jim Sheldon - W0EB
[EMAIL PROTECTED]
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have cata
Unit is Sold
W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post t
ed, please reply off the reflector. I take checks, money orders
and Pay Pal. (add 3% for PayPal).
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
The RLC AS-120B has been sold
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: ht
Both attenuators have now been sold
W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
have for sale 3 Parallax BASIC Stamp-1 modules, 3 carrier boards and 2
serial display boards (1 used, 1 brand new), 1 25 pin serial programming
cable. The documentation can be downloaded from Parallax's website. (Doc's
included in the new BPI-216 serial display package) some application notes
a
BASIC Stamp modules have been sold.
W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
/mobile radio, and mounting
brackets/power cords can easily be found at hamfests.
Asking $90.00 plus $10 shipping anywhere in the US. Check, Money Order or
Pay Pal, with PayPal preferred.
Anyone interested, email me off the list
Jim Sheldon, W0EB
[EMAIL PROTECTED
IC-3220 is sold, pending funds.
W0EB
> -Original Message-
> On Behalf Of Jim Sheldon
> Sent: Tuesday, April 17, 2007 3:54 PM
> To: 'Elecraft Mailing List'
> Subject: [Elecraft] OT: FS - Icom IC-3220 Dual Band FM rig
>
> For sale (from an estate) Icom
KX1 #1268 arrived yesterday. Completed construction and alingnment 15
minutes ago - #1268 is alive and well.
Thanks Elecraft, for producing such a fine little "almost" pocket radio.
Jim - W0EB
K2#4338, KX1#1268
___
Elecraft mailing list
Post to: Elecr
oned in the book,
and I HAD read it. Just forgot it in my excitement to get my KX1 on the
air.
Oh yeah, first contact with the KX1 was a DX station (PA600GOES - yeah I
know it's a weird call that's pa six hundred goes) in the Netherlands. Got
a 539 on 20 meters - KX1 and a CushCraft
doing a couple, you'll wonder
what all the fuss was about anyway.
Anyone having further questions, feel free to email me off list.
73,
Jim Sheldon, W0EB
Wichita, KS
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.n
Hello Simon,
I just built my KX1 and like you thought the paddles wouldn't be good for
me. Wayne, N6KR convinced me to try them, and I must admit as he said, they
grow on you, and they are really convenient. When constructed properly
according to the instructions, they actually have a nice feel,
Hi Kevin,
Thanks for the heads-up on Tom and W0O. Managed to catch him on 14.027.5
and he says there is another one on 7.029 or thereabouts as well.
Jim - W0EB
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Rock
> Sent: Monday, October 31,
Still debating about buying a K1, K2, K2/100 or KX1? For a firsthand look
at them, come join W0EB (Jim), WG5F (Ed), KL7Y (Sam) and N3ARU (Dwight), at
the Enid, Oklahoma hamfest this coming Saturday, November 05, 2005. Ed,
Sam, Dwight and I will be manning a table resplendant with the Elecraft
ban
them somewhere
so everyone can see them.
72 & enjoy --
Jim Sheldon, W0EB
K2 #4338 & KX1 #1268
>
> On 11/15/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > I have a question for the collective out there. What is
&
Hi Mark,
I have to echo W3FPR's advice. I had a Viewsonic monitor myself, and I DID
shield the inside, put ferrites on the VGA input cable, put chokes, ferrites
& capacitors on the AC input as well, and didn't even manage to reduce the
radiated noise. I suspect it's coming from the CRT itself.
Another's experience.
I haven't tried the LiPoly batteries yet, but I did find a fairly decent
bargain on NiMH batteries & charger at one place. They are made in China,
but the quality seems okay. Got 20 (count 'em) 20 2300 MaH AA batteries and
a charger that holds 10 at a time for about 50 bucks
Addition -- I had the battery vendor wrong - batteryspace.com not
batteryspot -- usual disclaimer, not connected to them in any way, just
reasonably satisified with their product. They have a bunch of different
battery/charger combo's.
W0EB
Another's experience.
I haven't tried the LiPoly batt
Tom,
I've been working hamfests around here, showing off my K2 and having lots of
fun. I asked the guys at Elecraft to find me someone with a KX1 to help me
out as I was getting a lot of questions about it. Wayne talked me into
getting one myself, and when I ordered it, I said I wasn't going to g
Paul and others,
Don't give up on the bug just yet hi. It usually takes a year or more to
develop a "clean" fist with a bug. Set the dot arm stop for a gap of
slightly less than 1/8 inch. Set the dot contact so that when the dot
paddle is pressed, you get evenly spaced dots for 3 to 4 seconds, a
>From Dwight, N3ARU in Wichita, KS -=- Well, we now have snow. K2 is on the
bench.
He has had his K2 kit for some time, but had decided to wait until there was
snow on the ground to start construction. There is now snow (about an inch)
so construction has begun. About time!
Jim - W0EB
__
First off, let me wish a very Merry Christmas to all at Elecraft and on this
reflector.
Yesterday, I was gifted with an older Fluke Model 92B Series 2, 60 MHz
ScopeMeter. Battery pack was shot, but it runs just fine on the wall-wart.
The guy that gave it to me and I have worked together on vari
160 is starting to quiet down - have 35 worked in an hour - started at 21:30
and it's now 22:46Z. Have to leave for my wife's office Christmas Party,
but we won't stay too late and will probably get a bunch more in later
tonight. Wish the KX1 had 160 on it, but the K2 is doing well - power set
to
Just worked FK8GJ in Noumea, New Caledonia on 40 CW with the K2 @ 5 watts.
He had a real nice signal into Kansas this morning 569 and no QRN. The
surprise was catching him before the pack jumped on him, and he had already
been spotted on the net. He was also wanting to rag-chew a bit which was a
exposed parts are firmly at ground potential and check all newly purchased
things of that nature to insure that the plugs are indeed polarized, and
that the wide blade of the plug is connected to the shell side of all lamp
sockets. Eliminates a whole lot of grief.
Jim Sheldon, W0EB
K2#4338
For the first time in my ham career, I will be able to make FDIM and the
Dayton Hamvention. Hope to see a lot of you there. I have volunteered to
help at the Elecraft booth on Friday & Saturday but haven't heard back yet.
See Y'all there.
73,
Jim
You forgot to mention to watch out for following pedestrians. They tend to
step on the drag wire and this gets interesting when it comes up short.
Tends to yank the KX1 out of your hand, or in my case, bust the BNC to
binding post adapter off. Also taught me to buy a Pomona BNC to BP adapter.
The
Happy Birthday Spence,
I got mine (#4338) for a 32nd Wedding Anniversary present from my wife 2
years ago. She gave it to me early, just in time to get it built for field
day.
The KX1 came this year.
Jim, W0EB
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] O
On that page that Bekir Kemal lists also is a link to the ARRL's PDF file of
the original construction article. It's accessable and can be saved to your
hard drive. URL for the QST article is:
http://www.arrl.org/tis/info/pdf/0109031.pdf
Jim - W0EB
Wichita, KS
K2#4338 KX1 #1268
> -Original
u'll have nearly the same results
I did. At least, you'll have sufficient audio to drive the KSB2 and not
have to modify the radio to beef up the circuitry.
Jim Sheldon
W0EB
K2 #4338
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf O
mounted. It was shipped to me with the tubes in place, and they survived.
I can either leave them in, or remove them - your choice.
Jim Sheldon - W0EB
Wichita, KS
Serious inquiries only and please off the reflector.
___
Elecraft mailing list
Post to:
For Sale, homebrew crystal radio with 1N34A detector (Salt Box coil form)
works really well and will pick up close stations with 20 foot wire antenna.
Needs high impedance headphones, either crystal or magnetic (2K impedance or
higher)
Also have a set of genuine antique Trimm "Featherweight" high
p of that.
The mag mount was an additional $50
Asking $185 plus shipping for all of it. UPS shipping will probably be
around $20 due to the packaging.
Anyone interested contact me off the list please. I'll take USPS money
order or PayPal.
Jim Sheldon, W0EB
[E
Antenna package has been sold pending funds.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecra
I have one IC-2100H, 2 meter FM rig for sale. Rig is minus microphone (got
run over by wife's car) and power cord (standard T type connector). Would
make a good dedicated APRS radio for someone, or you could replace the
microphone and use it as is. Rig is working and puts out 58 watts on high,
1
Radio has been SOLD,
Jim - W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subsc
FS: PIC Programmer that has both a 9 pin serial port and USB port on board.
Will program all the current MicroChip PIC's and is upgradable to add new
PIC's as they are brought out.
Original cost in kit form was $49.95 plus $17.95 for the programmer and 40
pin ZIF (zero insertion force) socket and
Programmer is sold pending funds.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help
d, contact Jim Sheldon, W0EB off list please.
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinf
IC-207 has been sold. Thanks to all that responded.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
0C(50 watts, 100-250 MHz), 50D(50 watts, 200-500 MHz), 100C (100
watts, 100-250 MHz) and 100E (100 Watts, 400-1000 MHz).
I'll take certified check, money order or Pay Pal
Interested? please reply off the reflector to:
Jim Sheldon, W0EB
[EMAIL
Sorry guys, Wattmeter sold within 5 minutes.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecr
off the reflector please to minimise bandwidth. I'll take
certified check, money order or Pay Pal. (Pay Pal add 3 percent as that's
what they charge me).
Jim Sheldon - W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to
The MBT-100 has been sold - Thanks to all who inquired.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listi
Canada and overseas will need to
negotiate postage. I'll take money order or PayPal.
Inquiries off list please to keep reflector bandwidth to a minimum, thanks.
Jim Sheldon, W0EB
K2 #4338
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecr
Paddles have been sold, thanks to all that enquired.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
ll cause
distortion in the received audio of the station you are listening to if
there is a reasonably strong signal within 5 to 10 KHz of the signal you are
trying to receive. This occurs with ANY noise blanker, not just the KNB2.
Jim Sheldon, W0EB
K2 #4338
> -Original Message-
>
llars.
Interested parties contact me off list please.
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
K2 #4338 has been sold - thanks to all that enquired.
Jim - W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/l
tained from
OHR. It can be powered from a 9-12 volt wall wart or an internal 9 volt
battery (included).
Asking $85.00 shipped anywhere in the US Please reply off the reflector to
save bandwidth.
I'll accept check/money order or Pay Pal. If PayPal, will ship same day
funds are received (USPS
WM-2 has been spoken for.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http:/
you want the
button for. Instructions are on the order page for check, money order or
PayPal.
I can also make custom buttons with your club's logo (you supply the logo)
and individual callsigns, membership numbers and other things. Contact me
by email or phone for further inform
than the low resolution images shown on the webpage. This is a
shameless plug for my product which will only show up on the reflector
approximately once a month unless Eric or Wayne tell me not to.
www.members.cox.net/w0eb
Jim Sheldon - W0EB
fied check or money
order.
Anyone interested, please contact me off list.
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, un
1 and has room for connectors/adapters.
The input connector is an SO-239 and I'll include an adapter to BNC as well.
I'll accept cash, check, money order or PayPal
Anyone interested please contact me off list.
Jim Sheldon, W0EB
[EMAIL PROTECTED]
__
y interested, please contact me off list. I'll take cash,
check, money order or PayPal.
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Add
VA-1 has been sold and shipped. Thanks to all those who inquired.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mai
Don't forget tonight's the April RFTB - starts at 8:00 Central, 0100Z
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
le on the subject.
Jim Sheldon, W0EB
Wichita, KS
K2 #4338
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/lis
nd recall my earlier post.
Jim - W0EB
> -Original Message-
> From: Tom Hammond [mailto:[EMAIL PROTECTED]
> Sent: Monday, May 09, 2005 8:37 AM
> To: Jim Sheldon
> Subject: Re: [Elecraft] K2: Erratic action of the Hand Key
> "Autodetect" function
>
>
>
ay, May 09, 2005 4:15 PM
> To: [EMAIL PROTECTED]; 'Jim Sheldon'; elecraft@mailman.qth.net
> Subject: RE: [Elecraft] K2: Erratic action of the Hand Key
> "Autodetect" function
>
>
> If Sverre's solution to the problem (Schottky diodes) is the
> answer, t
I too, have the K2 as my only rig in the home shack and I plan to keep it
that way. Antenna system at home consists of a B & W BWD-90 broadband folded
dipole for 80-40-30 and the rest of the WARC bands. 20-15-10 is a Cushcraft
A3S on a 10' tripod mounted on the roof of my garage which puts it abou
Ken, KG0WX now has his new K2 #4913 on the air -- worked him on 7.040 just a
few minutes ago for his first K2 to K2 contact. I'm sure he is really
appreciative of all the help the elecrafters gave him in getting it going.
He bought his after seeing mine at a local hamfest, and he commented to me
t
K2 doesn't need a
fancy, expensive microphone to sound good on the air. Pick up a $2.00 CB
hand mic at a hamfest, wire it to fit and operate. Quit arguing over which
microphone sounds better, you are losing valuable operating time!
Jim Sheldon, W0EB
> -Original Message
Anyone having an Icom FL-100 (500 Hz) or FL-101 (250 Hz) CW filter for the
IC-706 MKIIG (fits others too), that would like to sell it, please email me
direct with the details. All reasonable prices considered.
Jim - W0EB
[EMAIL PROTECTED]
___
Elecraft
Don's Buttons. This is a bit
cheaper than you can get them from Badge-A-Minit.
Entire system, shipped anywhere in the U.S. $285.00 (I'm going to put the
money toward a new KX-1).
Serious inquiries only, please reply off list.
Jim Sheldon, W
condition. Button parts go for about $25 per hundred, and buttons can be
sold for anywhere from $2 to $5 depending on what you put on them.
Jim Sheldon - W0EB
Wichita, KS
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
Anyone on this list have a manual for a Ten-Tec Centaur 411 amplifier that
they don't need anymore or would be willing to either copy it for me, or let
me borrow it long enough to copy it?
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing
pping it out of the States.
I will also trade even for an MFJ-989D or an MFJ-986 Tuner. Either tuner
would be okay. I'll pay shipping on the standard, you pay shipping on the
tuner.
Please, reply off list if you are interested - an older Dentron MT-3000
tuner would also be considered for
Standard has been spoken for -
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
First, I just tried this (never used it before) and have the same
problem here under Windows 7 Professional 32 bit on an HP 6300 running
an Intel Core i5 quad core processor, 16 gig of ram. It came loaded
with the 32 bit version of Win7 Pro and I made the mistake of loading
all my programs on
Unfortunately, my experience with Bioenno's chargers is that they are EXTREMELY
RFI noisy. In the same house with my KX3 the noise was over S9!
Sent from my iPad
> On Dec 21, 2015, at 2:37 PM, Juliean Galak wrote:
>
> Can one keep the battery on the charger and run the radio off the battery
t the problem hams have with noise and we might
> convince them to sell quieter LiFePO4 chargers.
> --
> Marc. SDG
>
>> On Dec 21, 2015, at 3:51 PM, Jim Sheldon wrote:
>>
>> Unfortunately, my experience with Bioenno's chargers is that they are
>> EXTRE
Funny, but until this thread I'd never noticed it. Mine does the same
thing, but since I have my P3 set to power up when I turn the power
supply on and before the K3, I'm looking at the power supply when it
turns on so I never saw it before today. It's part of the power on
sequence. I don't
the off topic traffic
to a minimum. Reply to this email, but please do not "reply all",
leave the Elecraft reflector address off the reply.
Jim Sheldon, W0EB
---
This email has been checked for viruses by Avast antivi
higher postage rates and the receiving party
having to deal with customs charges and possibly VAT as well.
If interested, please reply off the list to keep the off topic traffic
to a minimum. Reply to this email, but please do not "reply all",
leave the Elecraft reflector address off
The KXPD3 has been sold -- thanks for the replies.
Jim - W0EB
-- Original Message --
From: "Jim Sheldon"
To: "Elecraft Mailing List"
Sent: 12/28/2015 7:56:15 AM
Subject: [Elecraft] KX3 - KXPD3 Paddles For Sale
No longer need this as I mainly use a bug or external
Don's right, a hub will not work. It is a very minimum implementation
of a USB port and not expandable due to hardware limitations in the way
they originally did things. My work around was to find a multi-port,
mechanical USB switch. That way all you have to do is switch to
whichever device
Oh yes,
The synthesizer upgrade isn't cheap, especially if you have two
receivers (you have to upgrade the synth for each receiver, as one new
one can't coexist with one old one, but from experience, I've found the
keying sounds much cleaner with the new synthesizer, even at slower
speeds and
Anybody need a 250 gigabyte IDE (not ATA) hard drive? I have an essentially
new Western Digital WD2500JB "Caviar", IDE, 3.5" hard drive. This has never
been installed or partitioned.
It was sent to me by mistake and I was told to keep it when they replaced it
with an eSATA drive of the same s
The hard drive has been sold.
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.
I don't usually chime in on these threads, but not all LED's are
culprits. I had originally replaced all the incandescent bulbs in my
house with the compact fluorescent (CFL) type. My noise floor went up a
couple of dB when any of them were on, so after a couple of those so
called "5000 hour
st in will get right of first refusal. If after a week
the package hasn't sold, I reserve the right to either sell the items
individually or keep the package.
Payment by Certified Check or U.S. Postal money order, no PayPal (unless
you are willing to pay their charges).
Jim Sheldon, W0E
The KX3/PX3/KXPA100 station has been spoken for as a package. Thanks to
all those that wanted (and almost fought) over the PX3, but it is part
of the complete package and that has been sold pending funds.
Jim Sheldon - W0EB
---
This email has been checked for viruses by Avast antivirus
K3S Kit build Serial# 10641 arrived Monday about 9:00 a.m. Started the
build around 10:30 and continued through yesterday with a few breaks.
The build was complete except for the P/A and Sub Receiver at about 9:45
last night. I completed the 5 watt power calibration, REF CAL and
receiver RF
1 - 100 of 510 matches
Mail list logo
