Most antennas are a compromise of sorts whether it's installation height,
length, material. .etc. If you actually understand the physics and associated
math in addition to propagation then you innately understand there's no one
perfect antenna for everyone in the real world. When you're startin
I've checked the connections and can't seem to find anything to explain why
the USB disconnects from my PC when transmitting. It's not consistent.
Ideas?
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loy
now use a 20m hamstick.
I only intermittently have the issue when sending CW in test OR transmitting.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
From
Seems to massive overkill if you're only casually needing ESD once in a while.
If you're going to go all the way then you need a temp/humidity controlled
clean room with full ESD. For 99% of us a matt/strap setup and basic precaution
is more than sufficient. It all comes down to risk management.
27;t go over the
air) and hear what I send via computer.
Is that possible? I've not found a setting for that.
Thanks in advance.
Jer
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly
is OFF indicating
that I'm not going over the AIR. I'll check with the other settings in DM.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Mess
Ok, I just had an AH HA! Moment when I figured out what KY mode is.
Works as intended and desired.
Thanks guys!!!
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic
mmediately viewable/hearable.
https://youtu.be/tIHDxkJxWQI
Thanks in advance.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Ham.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
__
Elecraft mailing list
Home: http
rator Error.
Thanks all!
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
ferent antennas (diversity mode) but not sure about different bands.
Thanks in advance.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced
So how does the audio separate on the computer?
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Jack Brindle [mailto:jackbrin
You may try simply grounding the switch. I've resolved much of my station
noise with grounding and some basic shielding. It's an ongoing process.
I started with no proper grounds and am slowly adding them. It's amazing to
see the differences.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
A
It uses the principal of Quantum Entanglement at its core.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft
munity and self help.
For me personally it's a pleasure to support Elecraft and their products
primarily because they are aggressive to engage me in resolving any issue I
may experience. I can't name any other company in my lifetime that's done
that.
Jerry Moore
CDXA, INDEXA, SKC
ard, mouse, I'm right at $100
without the DC-DC converter (running an AC linear converter aka Wall wart).
I need to think about it some more. The end goal is something around 30w
mobile without spending a fortune. The Raspberry Pi has been impressive so
far.
Jer
Jerry Moore
CDXA, INDEXA, SK
Yep, I'm saving up for the subRX and 2 filters (2.8 upgrade and the 400hz).
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Ele
tals if you think you
need them, if you catch the contesting bug the DVR is nice, I purchased it
but haven't even used it to date.
Remember if you can't hear it then you can't work it anyway. TX power has
limited value.. better to be the elephant with big ears than an
alligator...al
Is there a way for the K3s to
tell me or the software what it's decoding?
It's pretty humbling when the gear is smarter than the op..
Tnx in adv es AE4PB ..
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loy
I'm not sure what that means.
I'm in Data mode on the K3S, the display correctly shows the text,
FLDIGI is in RTTY 45 and the water fall is bracketed over the received
signals..
Apparently there's a contest underway.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S
ng a 7" touch screen but I've not found any good SHIELDED
water proof enclosures for the pi+Screen. I just ordered the Pi 2 and a metal
case. We'll see what develops.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Consider
Ditto, it's scary just how much you can hear using the technology
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Ele
later..
Xwin + FLDigi the CPU sits at 8%, 2 Instances of FLDigi CPU sits around 15%.
NIICE..
Fun fun J
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic
ually I want to add the SUB Rx and monitor two bands.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...
craft representative review my information and make a
determination as to its validity AND recommend an Elecraft acceptable
solution if they agree there's an issue.
Thanks in advance.
Jer
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
by Elecraft to secure the transformer cores to the circuit boards will
resolve the issue.
Request:
I'd like to have an Elecraft representative review my information and make a
determination as to its validity AND recommend an Elecraft acceptable
solution if they agree there's an issue.
Thank
level. The
harmonic distortion appears to be completely and easily resolvable but I
need an approved adhesive to use. I'm not messing up my nice radio without
support and approval from the manf.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amate
rmation and make a
determination as to its validity AND recommend an Elecraft acceptable
solution if they agree there's an issue.
Thanks in advance.
Jer Cell: 803-431-1870
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - C
ther folks there
to put a dab of silicon on the ferrites to stop the rattle.
Easy fix. The result seems to depend on where you like the monitor frequency
to be.
I like Howard's suggestion to go with an external speaker or use a headset.
At this point it's fixed for my use.
Thanks.
Jerr
bably still buy it again. I am
starting to question overall value to cost. To be fair I believe Howard has
done all that he can. I also believe Elecraft has either an image to uphold
or a K3s audio reputation to repair.
If Elecraft will be at the Charlotte, NC Hamfest I might just cart my rig up
and
ted me off list with suggestions and shared
frustration for this issue.
73 ..
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Clay
users can hear because they don't use the speaker even after
I've taken the time to logically and methodically spell out steps to
reproduce the issue and my findings.
I'm not answering email on this for a few days until my blood pressure comes
down.
Jerry Moore
CDXA, INDEXA, SKCC, Fis
ted AND is actually inline. It's possible the internal
cable is switched between ANT1 and ANT2.
Just ideas/suggestions.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Pat
ngs.
When an assembled system is new, always suspect connections/configuration.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
___
Any Of these run natively und r linux? I am setting up running raspberry pi
under noobs Linux with x11. So far fldigi is the best pgm but lacks a lot of
desired functionality. Wants: CAT, logging, digital, waterfall, bandscope thats
sdr driven.
On February 27, 2016 11:40:14 AM EST, Jim Brown
dates with the K3 Utility..etc..
It would be nice if we had a K3S Linux group web something to share
notes/installs so we don't have to individually re-invent the wheel.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Consider
ilter use the K3 Utility to set which modes in which it's
permitted to be used.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From
If I understand what you mean to ask the answer is yes.
You can do CAT control AND audio in/out via K3S USB at the same time.
Don't connect anything to the DB connector. It is NOT a standard serial
connection
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.c
Bear with me because this is from my memory. To the best of my knowledge you
have to use the up button and down button to change values and cannot directly
enter the value. As I recall Wayne stated it would be added to a future
revision but apparently isn't present in the firmware you have which
Mode? Is the TX light flashing? Which antenna is selected? Is SWR indicated?
Does the RED led light when you key down?
Try Cw MODE, ANT1, if you have the ATU installed bypass it for testing..
jer
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of chr
Press and release the pwr/mon button until pwr is lit, then rotate the dial
to the right.. read the power setting on the sub rx area.
-Original Message-
From: chris grier [mailto:chris@blueyonder.co.uk]
Sent: Tuesday, March 15, 2016 5:48 PM
To: Jerry Moore; elecraft@mailman.qth.net
Working on my windows 10 desktop, my windows 7 laptop, my Apple IPADMini,
and my Galaxy S6 Android phone.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill
Sent: Friday, March 18, 2016 2:27 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft]
Ugh missed it.. all tickets are sold..
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Alan
Sewell N5NA
Sent: Wednesday, March 16, 2016 10:41 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Last Call - K3S Raffle
The drawing for the K3S raffle
Change the audio equalizer settings for received audio. When using a headset
you can tune the audio to your ears pretty well.
If you don't know what I'm talking about check the owner's manual page 37,
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf O
a windows app. I no
longer want to use windows because of the hardware/power requirements.
Thanks in advance.
Jerry Moore, AE4PB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
I run a service that redirects the community to the network and on the windows
side network to virtual Com port. The elecraft utilities run without issue as
needed. I'm running raspberry pi with noobs debian.
Jer
On April 18, 2016 3:45:42 PM EDT, Matt Zilmer wrote:
>All the Windows-native Elec
Did this go out?
On April 18, 2016 1:04:42 PM EDT, Jerry Moore wrote:
>I'm looking at getting a Pan adapter of sorts in the near future. I
>like
>what I'm reading about SDRPlay but since I use a Raspberry Pi to
>interface
>my K3S I'm not sure on what software
Looking for peer review. The setup has changed a bit
First purchase:
K3S/100-K 100w Tranceiver Kit
P3-K Panadapter.
KFL3A-2.8K 8 pole filter
KFl3A-400 400 Hz 8 pole filter
Second purchase
KPA500-K or Sub Receiver.. or ?
I'm getting lots of advice and just trying to figure ou
When will the new K3S book be available?
Anyone know?
Tnx in Advance
Jer/AE4PB
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
>
>>>> And no, I don't live on a tropical island. The average RH here the
>>>> desert of Tucson is less than 20%.
>>>>
>>> __
>>> Elecraft mailing list
>>> Home: htt
Hi David,
I should have been more specific. I meant the books by Fred Kady
-Original Message-
From: David G4DMP [mailto:da...@g4dmp.fsnet.co.uk]
Sent: Monday, August 03, 2015 3:47 AM
To: Jerry Moore
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] When will the new K3S book be
Just asking. It's a lot of money but appears to be a lot of radio. It's not
as flashy as some.
Just a lot to think about as I save up.
Jer
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://m
I get the exact same thing. I ended up using the channel analogy and that
seemed to help. This radio does channels 2 and 70 (2m and 70cm for car)
which allows me to talk locally to my friends. The new radio does all of the
world wide channels and let's me make friends all over the world (show map
w
Hi Marc,
All speculation and conjecture on my part.
Looking at the block diagrams for the digital I/O boards looks like (a
total guess on my part) you are experiencing an issue related to the rig
design. My understanding is the MCU code runs in a big loop (likely with
many subloops).
I don't see LMS listed. Does it support that?
Thanks in advance.
jer
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I just had a thought. A Raspberry Pi could be used to interface the QRO
keyboard to the K3/K3S through whatever interface supports the high speed
keying. Of course we’d need an OS and program on the Raspberry PI but I’d
expect that already exists. We might have to homebrew a switch interface. Th
Hi folks,
As I save up for my radio I'm doing a lot of research and educational
reading about radios. This morning the lightbulb came on as to WHY the K3S
is the best choice. You see, I used to run my own computer company and OEM
my own computers. One of the largest frustrations for customers
My thoughts would be that all devices use the USB instead of RS232. By
design the USB is a BUS rather than a point to point protocol as is RS232.
Especially with USB3 throughputs this would make a better interconnect.
Another thought would be an Ethernet connection in addition to the USB3. I
can se
Anyone know the type of solder used in the K3S board manufacture? I've been
reading up on environmentally safer solder and all of the reliability issues
that result from the solder spidering over time. Anyone happen to know?
I'm sure it's not an issue but it came to mind. I tried to call Elecraft
Ok, so I guess running DX from the International space station is off... darn..
LOL..
Jer
-Original Message-
From: N2TK, Tony [mailto:tony@verizon.net]
Sent: Wednesday, August 05, 2015 7:19 PM
To: 'Jerry Moore'
Cc: elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3S s
s
wireless which Elecraft suspect of being incompatible with the USB library
currently used in the SVGA card.
-
Marc W8SDG
On Aug 5, 2015, at 2:49 PM, Jerry Moore wrote:
Yes, RS232, can you check and lower the port speed to see if
Hi Don,
Sounds like very good advice to me. I was very surprised when I heard
the pop. I'm newly getting back into the hobby and moved my shack from the
bedroom on one end of the house to my office on the opposite side. I have a
lot of wiring items on my list which includes a 240vac circuit and
Excellent!! :)
-Original Message-
From: Marc Veeneman [mailto:mhv...@gmail.com]
Sent: Friday, August 07, 2015 9:33 PM
To: Paul Saffren
Cc: Jerry Moore; elecraft Reflector
Subject: Re: Keyboard Issue - [Elecraft] I wonder how many folks have had
buyers
Hah! That did it, Paul. Now I&#
want to be bitten by this.
Thanks in advance.
Jerry Moore / AE4PB
-Original Message-
From: Marc Veeneman [mailto:mhv...@gmail.com]
Sent: Friday, August 07, 2015 9:33 PM
To: Paul Saffren
Cc: Jerry Moore; elecraft Reflector
Subject: Re: Keyboard Issue - [Elecraft] I wonder how many folk
Yes, do tell, I want one in the future.
On August 8, 2015 1:46:46 PM EDT, Lane
wrote:
>Joe - How did you get the 200Hz filters for the K3S? I didn't see those
>as
>options anymore, but wished they were.
>
>On Sat, Aug 8, 2015 at 7:51 AM, Joe Subich, W4TV
>wrote:
>
>>
>> When I assembled my K3
Get Elecraft blessing first, however, a quality electrical contact cleaner with
plastic safe contact lubricant will likely help. Check with Elecraft before
using anything.
Jerry Moore
K3S future owner
On August 11, 2015 8:44:05 PM EDT, Chris Hallinan wrote:
>Tonight I turned on my 8-month
With all of the fraud and theft that's common in our hobby these days. Does
anyone actually do cash/check/mo anymore? Just asking because I'm often
tempted by deals I see but based on my background (IT engineer specializing
in messaging/information security) I know the risks involved.
Not meaning
Fair enough sir, ty :)
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Monday, August 17, 2015 1:57 PM
To: Jerry Moore; 'Joe Word'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 CW Filters For Sale
Jer,
I understand that this is not directly i
I'm not finding my ESD setup. Do you ship to the US?
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ok1rp
Sent: Monday, August 17, 2015 11:48 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft kits assembly using ESD protected bench
Hi a
Sorry about that, I get a bit over excited.
It's odd that I've been in IT since the late 1980s, grew up with the
internet (used to be dialup to the college then use *nix search tools to
find content) and this is the first time with Reflectors. I'm on at least 3
now..
I'll cut the chattering :) ju
des and operations J
Jerry Moore
AE4PB , Future K3S owner, 19 days and a wakeup.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Sent you an email sir.
On August 17, 2015 7:10:30 PM EDT, Joe Word wrote:
>The KFL3A-400 is still available. The 250 and 1.0K are sold.
>
>Joe N9VX
>
>On Mon, Aug 17, 2015 at 12:39 PM, Joe Word wrote:
>
>> I have three 8 pole K3 CW filters for sale:
>>
>> KFL3A-250
>> KFL3A-400
>> KFL3A-1.0K
>>
Now I know what to ask the XYL for Christmas ;)
On August 17, 2015 7:33:34 PM EDT, Fred Jensen wrote:
>The K2 case Rose custom made for me [with space for batteries, paddle,
>log, audio amp, and headphones for field operation] is perfect, just
>what I wanted, and as Howie says, "tough as nails.
I sent you an email sir.. I need to find out why my emails aren't showing
up.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
Word
Sent: Monday, August 17, 2015 7:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 CW Filters For Sale
It may merit further research. The owner's manual block indicates the Rx DSP
as "DSP2" ? It may be doable with firmware IF the hardware path would allow
it. IF the hardware paths allow it then it's probably configured in firmware
to protect the DSP/circuits... no clue.. looking for the schematic no
73 Doug EI2CN
-----Original Message-
From: Jerry Moore [mailto:je...@carolinaheli.com] On Behalf Of
ae...@carolinaheli.com
Sent: 20 August 2015 18:57
To: 'Doug Turnbull'; 'bs usb'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3S OR K3
Doug,
I just went throug
The illuminating facts are that the K3/S is selected because multiple radios
operating in a close area don't interfere where other brands apparently do.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
If you google around you'll find the Astron VS-35M is known to have issues
with voltage sag under load.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Charles Yahrling
Sent: Friday, August 21, 2015 11:06 AM
To: elecraft@mailman.qth.net
Subject: [El
Mike, to get RMS just multiple by .707
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike
Weir
Sent: Friday, August 21, 2015 11:07 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] P3TXMON question?
Good morning to the group, my P3TXMON just ar
I respectfully disagree. A properly made crimp is superior to a soldered
connection. The key word being properly made. If you don't have the correct
tools to do a proper crimp then a good compromise is to solder the connection
after crimping, however, that's only to comply with connection best prac
ility potentially being more susceptible
to weakening/breaks due to vibration – conjecture on my part.
2-24 - Do not tin wires that are to be crimped to
solderless terminals or splices.
I found a source for the modules online - http://jacquesricher.com/NEETS/
Jerry Moore
AE4PB
st 21, 2015 11:01 PM
To: 'Jerry Moore'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] normal K3 voltage drop on TX
You should be sure to NEVER say that around a microwave person! As long as
you stay in HF, crimps may be OK. As a retired microwave circuit and systems
design engineer,
ave to.
73, Ed - KL7UW
--
From: Bob McGraw - K4TAX
To: Jerry Moore , elecraft@mailman.qth.net
Subject: Re: [Elecraft] normal K3 voltage drop on TX
Message-ID: <55d7d678.80...@blomand.net>
Content-Type: text/plain; charset=utf-8; format=flowed
Properly it must be crimped A N D
Pictures or website? Little r if more appropriate.
Jer
> On August 22, 2015 at 5:09 PM GRANT YOUNGMAN wrote:
>
>
> I know this is old news for a lot of you, but after a long time (ser 2090 -
> about) with a K3, I’m finally going to take my K3/P3 on the road. Just got a
> set of cases from Rose K
es more sense.
One thing that may help would be to label a warning on the connector if you
may tend to forget that it's not a modem connection, rather, it's a
multi-function DB9 connection.
Just my opinion.
Jerry Moore
I've read where it can be used for easy/quick band/mode shortcuts. Typically
you'd want to automate anything that requires multiple button presses and
you often use that setup.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James
Wilson
Sent: Monda
will back off
>> on power as SWR rises.
>> P3-K Panadapter Kit for the K3S, K3 and other rigs ** for the time
>> being I'll use an SDR to view the band Misc filters over time as
>> needed.
>>
>> LOL, I'll be broke for a while but on the air.
>
Have the units been moved? Updated? Disconnected/reconnected since working?
If so: Please power off the amp and rig. Pull the cable and check for
pushed/bent pins.
Just a shot in the dark.
Sent from Mail for Windows 10
From: Dick Dievendorff
Sent: Saturday, August 29, 2015 12:20 PM
To: 'jim
about this and if it’s
an issue. What the implications are of the increased IMD, and what if anything
I can do resolve it.
Thanks in advance.
Jerry Moore
AE4PB, Future K3S owner – 5 days and a wakeup.
http://www.eham.net/ehamforum/smf/index.php/topic,97093.0.html is the thread
s pointing out that the K3 has (perhaps had)
>IMD issues compared to some others. I’m not an expert but would like to
>know if this has been fixed? It seems there are less expensive radios
>with better IMD. I’m still pretty much sold on the K3S but would like
>to know more about this an
Thank you Jim,
I'd expect if my signal was being overdriven that someone would tell me so
I could fix it *shrug*.
Anyway... I think this has been covered pretty well.
Thanks for all the responses.
Jer
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Beha
Rick,
Check your compression and ALC settings. There's a specific
setup/configuration for proper use AND test. Based on my reading you can
cause a bad signal on ANY transmitter with the comp/alc settings
miss-adjusted.
I'm sure someone here can better address the setup/configuration.
jer
---
Since we're adding our $0.02 I'll add mine as a "soon to be K3S owner".
1. Simple and efficient interface was part of my decision.
2. Although the rig lacks band switches, it has function buttons that
support limited macro's to set band/mode/other which fits 99.99% needs for
anyone who will RTFM an
On my reading/research on the 991, It's a good radio but the display/band
doesn't update as quickly or work the same as the P3 BASED ON MY READING.
Jerry
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of bs usb
Sent: Thursday, September 03, 2015 11:25
WTB KFL3A-200
Thanks in advance.
Jerry Moore
AE4PB,
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by
If Elecraft starts offering high quality/weighted knobs I hope they continue
to offer the standard knobs as well. Maybe make that an option.. standard
knobs included or pay an extra $500 for the heavier ones. For me, I'll stick
with standard.
-Original Message-
From: Elecraft [mailto:elecr
+1
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Rogers
Sent: Friday, September 04, 2015 7:37 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Icom IC-7300
Can we be done with the IC-7300 stuff? After all, this is the Elecraft mail
lis
Or FL3a-250 8pole
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
ae...@carolinaheli.com
Sent: Friday, September 04, 2015 8:02 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] WTB KFL3A-200
WTB KFL3A-200
Thanks in advance.
Jerry Moore
AE4PB
Have you checked the owner's manual? Gain for the DVR can be set
differently. You didn't indicate which radio you have. But the K3S manual,
Page 30.
While speaking into the mic, adjust MON for
the desired level. (DVR playback level can be
set differently; see CONFIG:TX DVR).
-Original Message-
And a details on page 31
Digital Voice Recorder (DVR)
With the KDVR3 installed, you can record and play
voice messages as well as capture received audio.
Transmit Message Record and Playback
Tap REC to start recording, then tap any of M1 -
M4 . Remaining buffer time will be displayed as
you speak
1 - 100 of 193 matches
Mail list logo
