itself.
73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700
> On 28 Aug 2024, at 03:30, Glenn Thorne wrote:
>
> Just tonight my K3 with KPA3 running 100 watts shuts down during digital
> transmissions. It appears that it happens after the PA temp is 47 C.
>
You can buy me a coffee sometime. đ¤Łđ¤Ł
Glad you found the issue. Itâs always comforting when it turns out not be the
rig.
73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700
> On 28 Aug 2024, at 22:15, Glenn Thorne wrote:
>
> Problem solved. It was the po
insist on bastardising the
English language.
Whose idea was it to shorten words such as âvictimâ and âperpetratorâ to âvicâ
and âperpâ?
73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700
> On 1 Sep 2024, at 18:55, David Cutter wrote:
>
> Wilson
>
> &q
Jim.
I presume that you have set the CONFIG:RS232 parameter to USB ?
Page 18 of the K3S User Manual.
Thereâs nothing in the replies (below) that seems to suggest doing this.
73,
Alan. G4GNX
From: KE8G
Sent: Saturday, March 23, 2019 5:45 PM
To: tony@verizon.net
Cc: elecraft
interface with my Icom IC700 and is
there a specific setting that would allow me to use the IC7100 âTuneâ button,
which allows tuning at reduced power (ISTR itâs set at 10watts)?
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http
eone
else (who usually doesn't own a K3) complains that it doesn't look like a
'real' radio. Do I care? Do I . :-)
73,
Alan. G4GNX
-Original Message-
From: Doug Person via Elecraft
Sent: Thursday, August 06, 2015 8:44 PM
To: elecraft@mailman.qth.net
Subject: Re:
of 7 Watts, so I would hope that the
IC7100 would work OK as it outputs 10W in tune mode.
It's more important to me that the K3 and KPA500 interfaces with the KAT500,
the Icom interface would be a secondary useful bonus.
73,
Alan. G4GNX
-Original Message-
From: Vic Rosen
27;t understand our "special needs" and will
attempt to wriggle out of a payout on very flimsy grounds.
73,
Alan. G4GNX
-Original Message-
From: ae...@carolinaheli.com
Sent: Friday, August 07, 2015 4:13 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Rig Insurance
I'
- 1) You can read and follow instructions.
2) You are not the average appliance operator.
As Radio Hams who have been to "Radio Ham School", I really hope that the
above two qualities truly apply.
73,
Alan. G4GNX
-Original Message-
From: Dauer, Edward
Sent: Sunday, August 23,
the
connectors.
Well, I didn't see that one coming!
73,
Alan. G4GNX
-Original Message-
From: Tony Estep
Sent: Monday, August 24, 2015 12:42 AM
To: Elecraft
Subject: Re: [Elecraft] If it plugs in, then it should work
The local Micro-Center store sells T-shirts that say &quo
conditions. The vertical in particular is better for DX,
with itâs high angle of radiation. I often swap the antennas on the same
band/frequency, so would not want auto-recognition.
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http
FWIW you don't het the Lulu discount on the pdf, only on hard copy.
73,
Alan. G4GNX
-Original Message-
From: j...@kk9a.com
Sent: Saturday, April 7, 2018 2:30 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] 15% discount KE7X book Code is FWD15
I looked for the K3S b
42
73,
Alan. G4GNX
-Original Message-
From: Mike Flowers
Sent: Sunday, April 8, 2018 6:33 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Fred's HHG vs Elecraft manuals de KE7X
And don't forget your towel ...
- 73 and good DX de Mike, K6MKF, Past Preside
riend.
:-)
73,
Alan. G4GNX
-Original Message-
From: Mark Wheeler
Sent: Sunday, May 27, 2018 3:29 PM
To: elecraft@mailman.qth.net
Cc: Mark Wheeler
Subject: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities
With the latest Windows 10 update earlier this week, my K3S a
nuals mention calibration being automatic, so I can't find any
reference to adjustment where the frequency is incorrect.
Anyone any ideas how I can get the transverter on frequency across the band?
73,
Alan. G4GNX
__
Elecraft mailing
n. Is this not the case?
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Friday, June 22, 2018 3:32 PM
To: G4GNX ; Elecraft Reflector
Subject: Re: [Elecraft] Transverter calibration
Alan,
Did you check the Frequency Calibration section of the K144XV option manual?
Look on
ck on, the discrepancy is back to around 200 Hz
and there's no way to manually adjust that in software.
I wonder if the K144XV itself is a tad off? I bought it from another amateur
so I don't know its 'tweak' history, other than I have never adjusted any of
it internally.
7
https://www.sotabeams.co.uk/
73,
Alan. G4GNX
-Original Message-
From: Dave Cole (NK7Z)
Sent: Sunday, July 1, 2018 5:07 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Proposed: more 6 meter CW beacons
That is a good suggestion, someone in EU has something like that for
RTFM. :-D
73,
Alan. G4GNX
-Original Message-
From: J Chester
Sent: Sunday, July 1, 2018 7:41 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Any advice, please?
Hello list,
I am reliably informed, by USPS, that a new KX3 has made it across the
Atlantic to beautiful Wales, via
ed his own initials (ELC) but
the callsign had been issued, so he decided to 'defect' and chose the call
G4FBI. :-)
73,
Alan. G4GNX
-Original Message-
From: elecraft-boun...@mailman.qth.net
On Behalf Of ANDY DURBIN
Sent: Friday, July 13, 2018 10:28 AM
To: elecraft@mailman.qth.ne
and the owners of ELECRAFT have just posted in this thread!
73,
Alan. G4GNX
-Original Message-
From: Mike Morrow
Sent: Friday, July 13, 2018 10:21 PM
To: ANDY DURBIN ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT OT OT OT Vanity call question OT OT OT OT
I want to learn
Oh please. Politics on THIS forum? No, no, no.
73,
Alan. G4GNX
-Original Message-
From: Doug Person
Sent: Wednesday, August 15, 2018 10:54 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3
You do realize that Japan is a serious economic and military ally... and
has been
is how good the NR is on them, particularly Hack Green. There may
not be nearly as much noise as I hear on the K3S, but there must always be some
and with very little âfiddlingâ it will sound like a quality FM broadcast (as
long as the audio itself is clean.
73,
Alan - G4GNX
> On 15 Dec 2
I too am looking for different logging software. I want to control a K3S,
IC9700 and IC7100 plus one other.
DXLab Suite sounds like it could work for me, but I need to know if it also has
a good Net Control facility. Do you happen to know?
73,
Alan - G4GNX
> On 22 Dec 2021, at 23:25,
?
73,
Alan - G4GNX
> On 2 Jan 2022, at 17:46, Bart Campbell wrote:
>
> I upgraded one of my KAT500 tuners to firmware version 2.05. I had already
> upgraded the KAT500 utility to the current version, so no issues there.
> After the upgrade, the KAT500 is unable to find a tuning
A bit of a long shot - I presume youâve checked the cover interlock switch?
73,
Alan - G4GNX
> On 17 Jan 2022, at 19:57, Sam Sargent via Elecraft
> wrote:
>
>
> Elecraft KPA500 sn 1910 dead.
>
> UPDATE 12/17/21
>
> First. Thanks to everyone who has responded
100W.
I hope that gives you some clues.
73,
Alan - G4GNX
> On 25 Jan 2022, at 22:21, ncela...@scicable.com wrote:
>
>
>
> I have a K3,KAT500 and KPA500. I had a station on 10 Meters this afternoon
> that I wanted to reach.
>
> The KPA500 did not work on 10M as if it
- G4GNX
> On 14 Mar 2022, at 05:06, Tony <73gu...@gmail.com> wrote:
>
> All:
>
> Can anyone recommend a budget de-soldering iron that can be used in tight
> places? I need to remove a small component that has a few surface mount
> devices close by so the iron wou
how to
clean it.
I can\t remember who made that tool, but I do remember a badge on it with the
word âSwaplaterâ.
I canât say whether the cheap device I bought from Banged has as much suction
as the âSwaplaterâ but I find it adequate for my needs as a hobbyist.
73,
Alan - G4GNX
> On 14
,
Alan - G4GNX
> On 29 Mar 2022, at 18:02, Mike Flowers wrote:
>
> Some years ago, Elecraft offered some hats on their website. Part number
> was KHAT, of course. I bought mine then.
>
> I run a K3, P3, KAT500 and KPA500 and occasionally a KX3 ... while wearing
> my ha
the
port to show, ensure that the baud rate is set to 34800, just to be on the safe
side.
You may need to force a re-load by applying 13.8V power, then press and hold
the power button for at least 10 seconds. I forget the exact indicators, but
you will see the backlight go off.
73,
Alan - G4GNX
addle
and made it operate too.
AFAIK there's nothing in software/firmware to allow that behavior to be set.
73,
Alan. G4GNX
-Original Message-
From: MaverickNH
Sent: Friday, September 22, 2017 1:37 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KXPD2 - Iambic B
Just sta
seller for a K3, which
I've since upgraded to almost K3S standard. There are a couple of UK
Facebook groups for buying and selling rigs and of course there's always
eBay.
Another place to advertise it would be RadCom.
73,
Alan. G4GNX
-Original Message-
From: Tony G6GLP
Se
(outboard) pre-amp which needs 12V power (very low
current). As the K3 12V output is via an RCA (Phono) socket, has anyone used an
RCA splitter to supply two devices?
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net
only be intended to
carry milliamps.
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Sunday, November 19, 2017 12:04 PM
To: G4GNX ; Elecraft Reflector
Subject: Re: [Elecraft] P3 with SVGA
Alan,
Look at the label on your K3 12 volt output jack. Does it say 0.5 amp
or
e difference in price?
I realise that the Casual User Package is Factory Built, so that would
account for part of the difference, but not all.
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
l help you with your P3 issue.
73,
Alan. G4GNX
-Original Message-
From: ANDY NEHAN
Sent: Friday, November 24, 2017 8:34 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] RF feedback problems with P3 and external keyboard
After LOTS of experimentation I think I have found that just recen
e BNC connector for
the K144XV transverter, so I presume that I can move all of the filters and
the K144XV from my current K3 to the new K3S without needing to swap any
rear panel hardware, just the modified K144XV strengthener bar?
73,
Alan. G4GNX
-Original Message-
From: Don Wilhel
Thanks Howard and Don.
That's all the info I need to make an immediate order.
73,
Alan. G4GNX
-Original Message-
From: Howard Stephenson
Sent: Friday, November 24, 2017 10:49 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Info on K3S packages
Hi Alan,
The K3S an
items were held for nearly 3 weeks because a holiday got in the
way. Not any fault of Elecraft of course.
73,
Alan. G4GNX
-Original Message-
From: Eric Swartz
Sent: Monday, November 27, 2017 1:53 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft Black Fri sale good through end
refunds on ebooks" policy. The other book I already have as
a download. I've submitted a ticket to Lulu, but they've not responded after
3 days, apart from an automated acknowledgement. I hope this is as one-off
and they will put things right.
73,
Alan. G4GNX
-Original Messa
position and this may be the cause of my issues??
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
like a dream and the ATU is now responding
correctly.
I am now a happy bunny and am happy to have learned something.
Now to fit the KPA3A...
I hope your issues are as easy to fix.
73,
Alan. G4GNX
-Original Message-
From: TKNorris
Sent: Sunday, December 17, 2017 4:58 AM
To: elec
Elecraft as downloads, so you can check before you order parts.
SMD capability is useful but not essential, although you will need an ESD
safe soldering iron with a fine tip and probably a good magnifying glass.
I can send you a list of all the mods and upgrades I performed, if you care
nform
those who insist on not taking adequate precautions, at least make an
attempt to discharge themselves.
73,
Alan. G4GNX
-Original Message-
From: rkr...@johngalt.biz
Sent: Friday, December 22, 2017 7:08 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Upgrading a K3?
On 12
Good points Don.
Why gamble?
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Friday, December 22, 2017 8:06 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Upgrading a K3?
Dale and all,
I would add to that --
When working without an antistatic mat, how much
hat you pay for!
73,
Alan. G4GNX
-Original Message-
From: Jim - N4ST
Sent: Friday, January 12, 2018 2:28 PM
To: 'F5vjc' ; 'Elecraft Reflector'
Subject: Re: [Elecraft] Antistatic Silicon Mat?
I don't believe the mat is anti-static any more than my wife's sil
ughts on how to connect it would also be appreciated, bearing in mind
that AFAICR the Wouxun only has a low impedance speaker outlet and all
others must be stereo.
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/m
I can thoroughly recommend these kits. I do all my ESD work on one.
73,
Alan. G4GNX
-Original Message-
From: Petr, OK1RP/M0SIS
Sent: Monday, January 15, 2018 9:15 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Antistatic Silicon Mat?
Just FYI,
https://www.ebay.com/itm
Couldn't agree more, Don.
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Wednesday, January 17, 2018 5:25 PM
To: Petr, OK1RP/M0SIS ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K1-2-Band-Module for sale on eBay...
Petr,
I don't understand why so
Straightforward answer:
Use a simple mixer with L/R audio gain controls.
73,
Alan. G4GNX
-Original Message-
From: Carl Clawson
Sent: Sunday, January 21, 2018 11:32 PM
To: elecraft
Subject: Re: [Elecraft] AF Balance
...if I could just make my
ou use a
particular frequency, the KAT500 will tune to the nearest segment and settle
down within milliseconds.
73,
Alan. G4GNX
-Original Message-
From: Steve Wilson via Elecraft
Sent: Saturday, February 10, 2018 1:26 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] New KAT500/KPA5
https://nk7z.net/rfi-site-survey-part-ii-interpretation/
There ya go.
73,
Alan. G4GNX
-Original Message-
From: Jim Rogers
Sent: Monday, February 12, 2018 4:03 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Link for the treatise on RFdi
Got carried away with the delete key
Does it have any upgrades, such as the new Synth and DSP module?
I've just seen a K3 + P3 go for $2670 on eBay UK.
73,
Alan. G4GNX
-Original Message-
From: John Fritze
Sent: Tuesday, February 13, 2018 1:42 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Used K3 price?
doesn't strain his back.
Perhaps special arrangements can be made for Bill? My other suggestion would
be to have the package delivered to the front door, then remove each box
individually and carry them separately indoors.
73,
Alan. G4GNX
-Original Message-
From: Wayne Burdick
C7300 needs an extra gismo, or you have to
switch to FM to tune. OK, the gizmo's are available but they're not built
in. K3 - press the TUNE button.
You pays your money and takes your choice!
73,
Alan. G4GNX
-Original Message-
From: Bill
Sent: Saturday, March 3, 2018 1:11 P
the use of ALC in this way seem feasible for use with the K144XV
transverter?
Has anybody done this?
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
ewing.
73,
Alan. G4GNX
-Original Message-
From: Al Lorona
Sent: Sunday, March 4, 2018 10:06 PM
To: Elecraft Reflector
Subject: [Elecraft] [OT] The Ultimate List of Hobbies for Men
I found it mildly gratifying that our hobby is listed at #2 of these 75:
https://www.artofmanliness.com/
Thanks Don.
The amp ALC line uses an audio oscillator and diode to generate the negative
voltage, so I can leave it out or add an extra gate for 5V or GND.
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Sunday, March 4, 2018 9:34 PM
To: G4GNX ; elecraft@mailman.qth.net
73,
Alan. G4GNX
-Original Message-
From: Peter Torry via Elecraft
Sent: Sunday, March 4, 2018 11:22 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 2 meter Linear and ALC with K3
Hi Alan,
I would strongly recommend that you do NOT use ALC for any form of
control signal or
Yeah, but where do you put the stopwatch to measure the RF? :-D
73,
Alan. G4GNX
-Original Message-
From: EricJ
Sent: Friday, March 9, 2018 1:58 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] IFR1500 Service Monitor For Sale
Usain Bolt ran 100 yards in slightly less than
Why not have a case made. I'm having one made for a 2M linear, so that it
matches the K-Line. I can send you a name and phone number of a facility in
Hove, if it helps.
73,
Alan. G4GNX
-Original Message-
From: Paul Wilton
Sent: Saturday, March 10, 2018 4:28 PM
To: Ele
with nothing.
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Perhaps the incorrect wording is being assumed.
3D is 3 Dimensional to most folks.
2D in this particular case is probably better described as 2 Directional (as
in fixing item 1 to item 2).
73,
Alan. G4GNX
-Original Message-
From: Wayne Burdick
Sent: Friday, March 16, 2018 7:36 PM
Thanks Don and everyone else who replied. I had not realised that they are
proprietary to Elecraft.
I've had one possible offer of some spare ones, but if I need more, I'll
contact Elecraft Sales.
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Friday, March
ISTR that the isolation between antenna ports is around 30dB. Allowing for
inaccuracies, your S9 down to S2 reading seems entirely reasonable.
73,
Alan. G4GNX
-Original Message-
From: kq5s...@gmail.com
Sent: Thursday, March 22, 2018 1:58 PM
To: Elecraft
Subject: [Elecraft] KAT500
I use the P3 with a 32 inch monitor and the display is excellent. I wouldn't
be without it.
73,
Alan. G4GNX
-Original Message-
From: Phil Hystad
Sent: Friday, March 30, 2018 12:31 AM
To: Elecraft
Subject: [Elecraft] P3SVGA and 20 inch Display
I am considering finally gettin
Unfortunately the www.k8gp.net address below does not work for me on this
side of the pond (UK). Any suggestions?
73,
Alan. G4GNX
-Original Message-
From: Dana Shtun
Sent: Tuesday, May 9, 2017 8:39 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Fwd: VHF+UHF Radio Wish List
I
ck to the UK.
73,
Alan. G4GNX
-Original Message-
From: Scott Manthe
Sent: Monday, May 15, 2017 6:12 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Dayton Dropoff
Hello to the list,
I'm getting ready to send my K3 off to Elecraft for some updates. Does
anyone know if it would
for not transporting customers' goods to and
from Dayton and I'm quite happy with the current arrangement I have for
collecting my Elecraft order.
On my own behalf, thank you for your attention, which is one of the
reasons I'm glad that I use Elecraft products.
73,
Alan. G4GN
le that I have is different to both of the
paper descriptions.
Can anyone shed any light on this conundrum or know if any addendum has been
issued?
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
itive fan supply! Oops! I
haven't seen any errata but it doesn't matter now.
My KPAIO3 module isn't the same layout as the ones shown, but the actual
connections are the same to the fans.
Well, I completed all of the mods, so now to put it all back together.
73,
Alan. G4GNX
-
st mode or the power turned right down?
73,
Alan. G4GNX
-Original Message-
From: Stuart Hill
Sent: Wednesday, May 31, 2017 2:25 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] No Receive or Transmit.
I have just switched on my K3 for the CW-T activity to find I have no
receive o
THIS is why I'm proud to own Elecraft equipment and will continue to do so.
73,
Alan. G4GNX
-Original Message-
From: Wayne Burdick
Sent: Tuesday, June 13, 2017 4:09 PM
To: Andrew Holman
Cc: Elecraft Reflector
Subject: Re: [Elecraft] Frustration with Elecraft
Hi Andrew,
Iâm th
If people follow the Elecraft instructions to the letter, the static charge
will be dissipated through the wrist strap.
If they don't follow the instructions, it's their own stupid fault!
73,
Alan. G4GNX
-Original Message-
From: GaryK9GS
Sent: Sunday, June 18, 2017 4:02
, which
seems to work OK, but attempting to read it back, results in a stall.
Is this normal behavior â a bug, or do I have an old or corrupted memory editor.
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net
I realise that it's only two of us so far, but I suspect it's a bug.
Hopefully, Elecraft will fix it.
73,
Alan. G4GNX
-Original Message-
From: Brian D
Sent: Saturday, June 24, 2017 11:33 AM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 memory editor
I have e
Line In
73,
Alan. G4GNX
-Original Message-
From: i5nph
Sent: Sunday, June 25, 2017 11:37 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Macro to switch Microphone input
I am using firmware 05.57 and I am tryng to use the command MP to write
macro
to switch Microphone from LINEI
problem.
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
in, which is really only for low output devices.
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Google - Behringer HA400 Microamp 4 Channel Stereo Headphone Amplifier
73,
Alan. G4GNX
-Original Message-
From: Peter Wollan
Sent: Tuesday, June 27, 2017 11:40 PM
To: w0agm...@gmail.com
Cc: elecraft@mailman.qth.net ; Steve Wilson
Subject: Re: [Elecraft] "Hot" setup for Fiel
Michael.
I direct emailed you yesterday. Can you check your spam box.
73,
Alan. G4GNX
-Original Message-
From: Michael Raskin
Sent: Monday, July 31, 2017 1:45 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] XG2 Signal Generator
XG2 - Signal Generator â brand-new, unassembled
I was under the impression that this thread was CLOSED. Please respect the
list owner's wishes.
73,
Alan. G4GNX
-Original Message-
From: Jim Brown
Sent: Thursday, August 10, 2017 6:32 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Amateur Radio Parity Act
Apparentl
If you are running Norton, delete it and bury it! Device of the devil.
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Saturday, August 12, 2017 7:57 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Frequency Memory Editor
Is this another instance of
and your point is??? or are you just attention seeking?
73,
Alan. G4GNX
-Original Message-
From: David Pratt
Sent: Sunday, August 20, 2017 4:31 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Unsubscribing
Regrettably, after 17 years as a member of this group I am now
managed to lose it for a week and
finally after several phone calls and a threat of court action, they
suddenly 'found' it again and it was delivered almost a month late and well
after Christmas! Gr.
73,
Alan. G4GNX
-Original Message-
From: Vic Rosenthal 4
nt can
sometimes be sold for silly prices.
I think that the above is where the "cheap" label has emerged from. I prefer
to think of hams as "thrifty". :-)
73,
Alan. G4GNX
-Original Message-
From: Rose
Sent: Wednesday, April 22, 2015 1:42 AM
To: Jim Lowman ; Elecr
and broke her collar bone, for which I hold you fully
responsible"!!!
It would seem that it is still not possible to fix 'stupid'!
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Saturday, May 30, 2015 10:01 PM
To: elecraft@mailman.qth.net
Subject: Re: [El
the orders pages, only the KXV3B appears to
be on offer now. Is this because it was introduced for the K3S or for some
other reason?
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
presume this is correct?
It also mentions adding a small gain figure of 1 or 2, what do others normally
do for a CW filter?
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Thanks for all the replies guys, much appreciated.
I will do a quick "by ear" setup for the time being and a more scientific
setup with instruments, when I have a little more time.
73,
Alan. G4GNX
-Original Message-
From: Vic Rosenthal 4X6GP/K2VCO
Sent: Thursday, July
there are any plans to offer a high
power module or external amplifier for 2 metres and/or 70 cms?
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
to the K3, or is my perception of the manual correct
and I need to use a USB to Serial cable?
I presume that I will have to order a front panel microphone plug from
Elecraft, in order to use one of my electret microphones?
Thanks in advanc
stable crystal oscillator is a thermostatically
controlled heating device. Nuff sed! :-)
73,
Alan. G4GNX
-Original Message-
From: Edward R Cole
Sent: Tuesday, October 14, 2014 10:47 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3EXREF Query
David,
10w is 7.3 kwH/month. I
Thanks for that information Arie. Very helpful. I will hold off ordering a
front panel plug until such time as I know that I really need one! :-)
73,
Alan. G4GNX
-Original Message-
From: Arie Kleingeld PA3A
Sent: Wednesday, October 15, 2014 9:29 AM
To: elecraft@mailman.qth.net ; g4
recommendation by
Elecraft.
I presume that thereâs nothing to setup in the K3 and K3/Utility communication
is automatic.
73,
Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
rchase direct from Elecraft, but it would take
over a week and I'd have to pay extra taxes to our government. :-(
I'm just intrigued to know why the genuine Prolific devices are so
troublesome?
73,
Alan. G4GNX
-----Original Message-
From: Don Wilhelm
Sent: Saturday, Octobe
,
Alan. G4GNX
-Original Message-
From: W2BLC
Sent: Saturday, October 25, 2014 2:17 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] RS232 interface
Perhaps the best bet is to install real serial ports - I have two. One
for the K3 and the other for my TS480. As I recall, I paid
sure that the config is 100% and save
it as a file.
73,
Alan. G4GNX
-Original Message-
From: Michael Walker
Sent: Saturday, October 25, 2014 4:48 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] RS232 interface
I've changed all my devices to Moxa's or Lantronix dev
too much money involved in other trade with them. Greed and money before
principles! :-(
73,
Alan. G4GNX
-Original Message-
From: Gary Gregory
Sent: Sunday, October 26, 2014 6:32 AM
To: Joe Subich, W4TV
Cc: Elecraft List
Subject: Re: [Elecraft] RS232 interface
Good grief.
1 - 100 of 282 matches
Mail list logo
