Sorry! Its there now. :-)
Eric
AB7R wrote:
Eric...
I don't see the schematic posted with the rest of the docs.
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Eric Swartz -
WA6HHQ, Elecraft
Sent: Wednesday, October 10, 2007 4:26 PM
To: Ele
Folks,
On ALL postings that refer to a specific radio or product, please
include [K3], [K2], [KX1], [XV] as the first item on your subject line.
This will really help everyone sort through the list email.
Thanks!
73, Eric WA6HHQ
Elecraft list moderator and company bottle washer.. ;-)
--
_.
Let's end this thread for now.
We are shipping printed manuals in the box with every K3.
73, Eric WA6HHQ
--
Julian G4ILO wrote:
I don't agree. Printing it yourself for most people would take a long
time, cost more than a mass-reproduced manual, use twice as much paper
(most hams don't ha
Both the ACC and RS-232 K3 connectors are sockets (holes).
73, Eric
Mike Harris wrote:
G'day,
Is the K3 rear panel mounted ACC connector a socket (holes) or a plug
(pins). Is the corresponding mating connector provided as part of the
kit?
Regards,
Mike VP8NO
_
If a radio has proper Key-Out before RF sequencing, like the K3 and K2
do, this is NOT necessary. We have no problem running with relay based
amplifiers, including those with large, slow relays, like the SB-220 etc.
A few radios out there have a TX loop feature, but most others do not.
Its not
Our 8 and TX EQ will allow you to do exactly this.
73, Eric WA6HHQ
---
Ray Kiesel wrote:
Would like to know if the adjustable transmit DSP bandpass
is on the short list for inclusion in the menu. (Maybe I missed
it in the manual?)
I plan to use a narrow tx bandpass (400Hz to 2.6kHz) to have
m
.. 8 Band... :-)
---
Eric Swartz - WA6HHQ, Elecraft wrote:
Our 8 and TX EQ will allow you to do exactly this.
73, Eric WA6HHQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
A -very- preliminary K3 programmer's reference is now on our K3 web
page. Please also read the important notes link just below it.
73, Eric WA6HHQ
---
David Pratt wrote:
In a recent message, Gordon & Lois Duff <[EMAIL PROTECTED]> wrote ...
When will information be available on the commands?
Guys,
Julian is correct, please place [K3], [K2] etc. as the first item on
your subject lines for ALL rig/product specific postings from now on.
We are -extremely- busy focusing on K3 shipments etc. After the dust
clears (withing the next month or so) we'll revisit the reflector/web
page/for
Good point. That is an 8 year old picture that we need to update. I
own both the Schurr shown and a Hexkey. I love them both :-)
I'll update it with the Hexkey after the K3 dust settles.
73, Eric WA6HHQ
--
Clark Macaulay wrote:
Several comments about liking the Hex Key have been made;
We have just uploaded the following K3 option manuals to the K3 web page:
KPA3 100W Option
KAT3 100W Autotuner
KBPF3 General Coverage RX Option
K3 Crystal Filter Options
KXV3 Transverter, IF output
See: http://www.elecraft.com/news.htm
73, Eric WA6HHQ
_
Hi,
We've been receiving a flood of emails lately asking questions about K3 shipping
and what we're up to here in Aptos. I apologize that we can not reply to all of
them as we're totally focused on getting K3s out the door.
We are slowly ramping up in fits and starts and definitely have shipp
None of our main vendors are in the fire area, fortunately.
73, Eric WA6HHQ
---
Brett gazdzinski wrote:
Glad the fire is not close.
Hope there are no hams living in the area but I am sure there are
with that many people involved
Maybe the factory that makes the boards, or the metal bits
i
12 Ga, 5 ft.
Power Pole connectors on one end, unterminated on the other end.
This cable is built for the Assembled K3s. Kit for for the kits.
73, Eric WA6HHQ
--
Mike B wrote:
Just out of curiosity (as I sit here revamping my station's power system), what
gauge and length is the power ca
Time to end this thread. :-)
In general, once more than 5-10 postings have been made on -any- topic,
please resist the urge to post unless it is absolutely necessary and
useful to others.
73, Eric WA6HHQ
Elecraft List Moderator
___
Elecraft mailin
Rev A of the Assembly Manual is now on the web site. Sorry for the
confusion!
73, Eric
---
David Pratt wrote:
I wonder which issue of the K3 Assembly Manual does the Errata sheet
Rev. A-4 refer?
The errata sheet shows and amendment to page 48, yet the Assembly
Manual XD3 only goes up to pag
We've just uploaded the K3 Rev B Owner's manual to the Web page. Lot's
of new stuff!
http://www.elecraft.com/news.htm
73, Eric WA6HHQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscri
Lyle - I think it definitely is desirable to let then RX with the wider
FM filter in AM. (With relaxed image reject specs.) I do this on all my
other radios. In that case, what is the max DSP b/w?
e
Lyle Johnson wrote:
...Alternately, can a coupling
capacitor be used across the filter slots to
Hi Matt,
We do not sell raw PCBs without the parts. The price we sell a product
for is not just based on raw component cost. It also includes our
amortized engineering development costs for designing and writing code
for each product, the overhead to purchase the components and carry them
in
Hi Joe,
We've decided to go with a 8-Pole FM filter manufactured for us by
Inrad, instead of the lower performance discrete 7 pole xtal filter we
were planning on designing and using. The 8 pole filter has an excellent
shape factor and better ultimate rejection than the 7 pole discrete xtal
f
I stand corrected! :-) Thanks for the info.
Those that paid the old price of "$99.00" for the 7 pole FM filter will
still get the 8 pole FM filter for that price. (not $79) New orders will
be at $120.
73, Eric
Joe Subich, W4TV wrote:
I think the most recent price was $99 ... but it's appre
We've now uploaded all of the Revision B Assembly manuals to the
Elecraft web page for the K3 and its options.
See: http://www.elecraft.com/K2_Manual_Download_Page.htm#K3
73, Eric WA6HHQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
Y
Fixed! :-)
Thanks for catching this.
73, Eric WA6HHQ
Ad Spaninks (PE1FTV) wrote:
Dear Eric,
Thanks for the update, but ... ehhh ...
Some of the links got mixed up:
KBPF3 Manual (pdf) refers to KAT3
KXV3 Manual (pdf) refers to MH2
___
Elec
K3 builders and owners,
We've created* k3support(at)elecraft.com *as a general K3 support
request address. (Replace the '(at)' with '@' in the address.)
Please use it for any support request emails as you get your K3 up and
running. It goes to our main team of people who are involved in tackl
Hi Everyone,
I've had my head down working out all the fun production issues ramping
up K3 production. I planned to post a status update Monday, but have
been too busy to do so until today. Things are definitely improving.
I'll post status here and on the Elecraft list later today.
73, Eric
Actually, the main reason for delay on the KPA800/1500 Amps was the K3.
Almost 12 months ago we decided that we could not bring both the
amplifiers and the K3 to market at the same time. It would be just too
much of a strain on the company, both fiscally and engineering resource
wise. We made t
K3 Status Update - Oct 31, 2007
K3s are going out the door on a regular basis, but we're still shipping
at a rate slower than I would like to see. My gut feeling is that we are
off of our last plan by 1-2 of weeks. Last week we resolved most of our
remaining major supplier problems (after hand
Oops! Yes, MAY 10th. :-)
Eric (guess I'm seeing double - still at the office..)
---
Raj Dewan, N2RD wrote:
On Oct 31, 2007, at 10:45 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
If you have not ordered before April 10th, we would appreciate your
holding off emailing us for status as mu
Hi Jim,
I just checked the planned shipping sheet and your's will ship either
Monday or Tuesday.
Saturday at Visalia was so crazy that it was difficult to keep all of
the orders in exact order. (Though we certainly have them sorted by
date.) Its possible your's and Al's were shuffled. We als
Its OK to -very gently- stand up and line up toroids that might have
been shifted in shipping. If they resist movement, do not force them.
(They don't like abuse.. ;-)
But absolutely DO NOT readjust the spacing or location of turns on the
cores. On many of the cores, especially those in the Lo
Hi David,
Since the K3 kit requires 7 to 8 hours of customer assembly of our
components following the detailed steps in our 60 page assembly manual,
and because it does involve customer alignment and set up of the PLL,
filters etc (via the front panel interface) it clearly does fall under
the
Hi David,
I agree with this point too. All of the components of the K3 are
designed only for use inside that radio and not as general general
options for other manufacturer's products. The boards are not stand
alone products.
73, Eric WA6HHQ
David Cutter wrote:
An interesting parallel
It turns out Tim, the qth.net administrator, needs the 'personalization'
option turned on in our list header for a week or so. He is trying to
track down an AOL subscriber who is bouncing all of our list postings to
him as SPAM. Unfortunately that user is subscribed under a forwarding
alias, so
We also sell these 2.1MM power plugs as spare parts on our parts and mod
kits order page.
See: http://www.elecraft.com/order_form_parts.htm
73, Eric WA6HHQ
Elecraft
-
WA9TGT / Donnie Garrett / Muncie, IN wrote:
Does anyone happen to know the Mouser part number for the coaxial
power plug
Elecraft list members, please see the message below
.
73, Eric WA6HHQ
Elecraft list moderator
Original Message
Subject:[QSL-Net] More AOL Woes (Everyone Please Read)
Date: Sun, 08 Aug 2004 12:23:39 -0400
From: Tim <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Ove
Check your TX current when set to 10W requested power.
High TX current points to the LPF or output transformer.
Low TX current points to T2 or low drive from the BPF filter.
73, Eric WA6HHQ
Leigh L Klotz, Jr. wrote:
Does 0.8W output on 10m/12m sound more like a problem with the lowpass
filt
Hi Tony,
Unfortunately we can't publicize our customer list without permission
for pricacy/legal reasons.
73, Eric WA6HHQ
Tony Wells wrote:
Leigh wrote:
See http://www.zerobeat.net/qrp/k2data.html
It covers all the models, despite the name.
Leigh.
If Elecaft don't want to do this, th
Lets end this thread.
Also, in the future, please do not copy ALL of the prior test. We are
overloading list readers, especially those reading the digest or web
versions.
73,Eric WA6HHQ
Elecraft List Moderator from time to time..
===
___
Elecraft
If you have misplaced your elecraft list password, or if you never received
it, here is how to get it sent to you again.
Go to: http://mailman.qth.net/mailman/listinfo/elecraft
and scroll to the bottom of the page. Enter your email address (the one you
used for the list) and click on 'Edit Optio
Guys,
Emails of this type are inappropriate, on, or off, list. Please read the
list guidelines.
Also, if someone receives an email of this type privately in reply to an
Elecraft list posting, please email the moderator a copy and do not post
it to the list.
Also, when contemplating replyin
Elecraft Mail LIST GUIDELINES
For those of you who are new to the list, (and for those of us who have
rapidly failing memories..), here is a quick list of things to remember when
posting to this list. Please save this for future reference.
The most important thing to remember is that this is onl
I'll post a shipping status update later this weekend. I want to wait to
see how we did this week. (We shipped a lot :-) As I noted before, I'll
be posting by order date what orders we plan to ship over the next week.
I'll post here and on the shipping status page.
Back to work..
73,
Eric WA
One clarification on this - We can't post the individual orders in
public, but we will post the dates orders were placed that should ship
the following week.
Eric
Eric Swartz - WA6HHQ, Elecraft wrote:
I'll post a shipping status update later this weekend. I want to wait
to see
Fixed!
Thanks for catching this.
73, Eric
---
Chuck Catledge wrote:
FYI to the K3 documentation team, the link to Rev A-2, 11/07/2007 of the K3
Programmer's Reference manual results in: "The webpage cannot be found".
--
Chuck - AE4CW
___
Elecraft
Yes - but it was released to me on Nov 7. I'll change the link date back
to Oct 12th to eliminate any comfusion.
Eric
Toby Deinhardt wrote:
Now that Eric has fixed copied the manual to the correct directory -
forget my last mail.
Is revision 2 really from the 12th of October and not the 7t
As promised, I've just updated the K3 shipping page to give projected
shipping status by order date.
Here's what I posted:
Weeks of Nov 12-16 and Nov 19-23 (Orders with deposits):
We will be shipping all of the 4/30 orders and most, if not all, of the
5/1 orders during this period.
We a
Dick is having trouble posting. Here is his comment on the downloader
utilty and anti-spyware.
73, Eric WA6HHQ
Original Message
Subject:RE: [Elecraft] Latest updater reported as Spyware!
Date: Wed, 21 Nov 2007 07:36:07 -0800 (PST)
From: Dick Dievendorff <[EMAIL PR
We have just posted the latest versions (Rev C) of the K3 Assembly and
Owner's manuals to the web site. These new manuals incorporate customer
feedback from the first 100 K3s shipped. Thanks for the suggestions!
73, Eric WA6HHQ
http://www.elecraft.com
___
We have just posted a new revision (A4) of the K3 programmer's reference
on the manual download web page at http://www.elecraft.com
73, Eric WA6HHQ
---
P.S. Have a GREAT Thanksgiving! (And a super weekend if you are outside
of the U.S. :-)
___
E
Hi Dave,
Wayne has temporarily turned NR off in the current release. It should be
turned back on in the next release.
73, Eric
_..._
Dave G4AON wrote:
I don't know if it's something I've done, or if it's the latest
firmware, but somehow I've lost my noise reduction function!
Can someone
Hi Klaus,
We are receiving emails from you, but you are not receiving our reply
emails reliably. We have been trying to confirm your K3 order of April
30 for over a week so we can ship it.
Please call Lisa Jones at 831-662-8345 so she can confirm the order and
shipping details with you.
Re
I see there has been some confusion regarding deposits in recent emails.
To clarify this, we just added the following to the shipping status web
page.
73, Eric WA6HHQ
A note regarding K3 deposits:
We originally gave our customers the option of getting a low a low
serial number K3 from
Hi Paul,
These are not even out of engineering development, and to be honest, its
too early to give performance, price or availability yet. They might be
available some time after Feb-March next year at the earliest. We're
primarily focused on getting the other options completed and out the
I just discussed this with Wayne. It was an oversight and we will
definitely do this in an upcoming K3 f/w release.
73, Eric WA6HHQ
_..._
Don Nesbitt wrote:
Julian - I had not gotten that far with my K3 but just checked it - and -
couldn't agree more! Auto on Ant1 is Auto on Ant2, Bypass
Hi Doug,
The connector on the bottom of the K3 front panel is not a keyboard
connector. It is a used during manufacture for initial programming of
the K3 processor boot code.
It could possibly used for general I/O, but nothing is designed at this
time. Anything hooked up to this connector is
Hi Barry,
There is a lot of confusion and mis-information about the need for CW
keying loop feedback from the amplifier to the rig in the amateur
community. While certainly it was necessary on some older rig and amp
combinations, it is not necessary with a properly designed rig today
that has
We're drifting a little afield on this thread. Let's let it rest for now.
73,Eric
Elecraft List Moderator
Bob Nielsen wrote:
Actually Russian Antarctic stations us a R1 prefix, as do Franz Josef
Land and Malyj Vysotskij. I think some contest stations in Russia
itself also use the R without a
Hi Doug,
We were taking great pains -not- to give this impression at Dayton,
since we were already into the 2nd run. I apologize if there was
confusion on this issue.
I am very clear on this and made sure we kept everyone informed of what
we were doing. Prior to Dayton we had already changed
Hi Barry,
We will definitely have TX inhibit as an input on the K3 AUX I/O
connector. Its not turned on yet, but should be shortly as we add this
feature to the firmware. It certainly helps for some set ups when using
the rign in a SO2R arrangement etc.
73, Eric
Barry N1EU wrote:
Thanks D
We're testing AM in the DSP code right now.
FM follows, but will also need the FM filters which are still coming
from our vendor.
73, Eric WA6HHQ
Joe Stofko wrote:
Might one assume that AM and FM cannot be far behind??
Thanks,
Joe - WB1AIU
_
Hi Johhny,
There are two ways to drive a single line RF IN/OUT transverter with the
KXV3.
1. You can use a BNC 'T' connector with a short (<3 to 6")coax to jumper
the in and out XV connections together and then drive your single line
transverter.
2. You can jumper a small wire between the two BN
We have just released new versions of the K3's firmware and of the K3
firmware downloader. You can get more information on these on our K3
Software page at:
http://www.elecraft.com/K3/k3_software.htm
What's new?
* Noise Reduction feature re-enabled.
* Improved menu usability (new power-on def
Hi Don,
Congratulations! One correction, we show your order as coming in on May
1st at 17:17:31 - 0400 on the computer.
The match with your K1 s/w is a total coincidence. Wow! I just checked
with Lisa and she didn't do anything special. I guess the stars were
aligned properly for you. :-)
Elecraft Mail LIST GUIDELINES
For those of you who are new to the list, (and for those of us who have
rapidly failing memories..), here is a quick list of things to remember when
posting to this list. Please save this for future reference.
The most important thing to remember is that this is onl
Guys - This thread is rapidly degenerating into a name calling contest.
It is OFFICIALLY ended. Please refrain for further posts criticizing
what others are saying.
Eric WA6HHQ
Elecraft List Moderator (from time to time..)
P.S. As a general note - My dealing with the email from everyone
com
Guys - This thread is rapidly degenerating into a name calling contest.
It is OFFICIALLY ended. Please refrain for further posts criticizing
what others are saying.
Eric WA6HHQ
Elecraft List Moderator (from time to time..)
P.S. As a general note - My dealing with the email from everyone
com
Darn spell checkers! ;-)
I'm ready for a -huge- dinner tonight..
Eric
--
Terry Schieler wrote:
Eric wrote:
"we will not let quality supper"
Many thanks for the update Eric. Now take a break guy and get something to
eat. You're obviously starving. :o)
Terry, W0FM
__
I'd like to make a general statement about deliveries, status updates, etc.
First of all, I'm primarily focused on getting K3s out the door each day
and as a result I only read the list every second or third day, so my
replies to queries here can easily be delayed by that amount. Also, when
th
Guys,
Please, let's end this thread now. (With respect to criticisms of others
etc.) It is totally inappropriate to directly criticize anyone on this
list (except of course myself and the company. Its always OK to
criticize us. We want to hear it so we can improve our processes here :-)
73,
Exactly! :-) This is one the primary reasons we set up the list.
73, Eric WA6HHQ
---
THOMAS BRERETON wrote:
Dave, G4AON, hit it right on the head when he said:
"That is the whole point of the reflector, simple 'how does it fit'
or 'where does that go' questions are easily resolved"
I've be
I don't have the numbers in front of me, but the K3 will automatically
reduce power as needed if the PA gets too hot. We've never been able to
get one that hot under normal operating conditions (including 100W key
down for 10 Minutes.)
The FP temp is more of a general ambient temp inside the K
We've just released new K3 firmware:
MCU V1.48 and DSP V1.45
* Power output via -external- CW keying no longer jumps up slightly
above requested level.
* Noise reduction much improved, including insertion loss compensation.
* S-meter accuracy improved.
* LINE IN state preserved on power-off.
If you get a 'INTEL HEX Read ERROR' message after the K3 Utility gets
new files fomr the server, that is because we had a bad initial upload
of DTBL0004.HEX to the ftp server. Its now corrected.
Delete DTBL0004.HEX from your local directory and then tell the K3
utility to get files from the se
We will warranty the K3 for its normal period, regardless of the owner. :-)
But we will need confirmation for the original purchaser that they have
sold the radio when we get a request from a new owner for warranty service.
73, Eric WA6HHQ
Elecraft
Thom LaCosta wrote:
On Sat, 8 Dec 200
Its a USB to Serial adapter (with 6' cable) that has been tested with
the K3. This is required because all of the existing software to control
rigs expects a virtual com port.
73, Eric WA6HHQ
---
Mike Fatchett W0MU wrote:
Is this an option that installs a USB port in the K3 for remote contro
Hi Julian,
I apologize for the delays getting you (and everyone else) your K3. We
are absolutely working as hard as possible to get K3s out the door
quickly. Every time I see a complaint here (and elsewhere) about
delivery delays, status accuracy etc., I take every posting very
personally (es
Guys,
Sheesh! - I spend the day off site at our subcontractor getting our K3
PCB manufacturing rate up and return to a pile of emails :-)
Please, let's end the pro/con K3 shipping status/delay discussions for
now. I think we've beat it to death, and I'm losing way too much time
reading it th
We've been busy at Elecraft Engineering this week and we have just
placed new K3 firmware on the ftp site.
MCU: V 1.49
DSP: V 1.46
New Features:
Noise Reduction significantly improved. Also, NR can be used with narrow
filters in CW mode.
AM mode added. (6 kHz Filter required.)
NOTE: AM Po
This issue was fixed many firmware revisions ago. :-)
Doug - Make sure you are using the latest release.
73, Eric
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Tuesday, December 18, 2007 11:55 AM
To: David Yarnes; Elecraf
Hi Vic,
We now have a simple Windows based utility program to unlock TX outside
the U.S. limits for use on U.S. MARS and by those outside of the U.S.
Run it once and the rig is opened up. (It needs RS-232 / USB
communications to the rig as usual.) It also has a button to re-enable
the U.S. l
Hi guys,
We have a second program in process that will allow you to set specific
band limits. We have an internal version of that in-house now for use
setting limits for special countries , like Thailand, but it needs some
sprucing up before release to the public.
At this time we're only doi
Please note that the K3 -always- blocks high power TX in the CB band,
regardless of what is programmed in for band TX limits.
73, Eric WA6HHQ
David Ferrington, M0XDF wrote:
"Opening" the rig up, as you put it, would be unwise as it would enable
you to operate high power CB. Now you wou
I just checked and Andy is not set for "no mail" status. Th elist server
is certainly emailing him. So the problem is probably at his ISP's end.
Possibly it is flagging list postings as SPAM.
73, Eric WA6HHQ
Bill Tippett wrote:
I sent this direct to Andy because I included a screen s
Ken Kopp - K0PP
[EMAIL PROTECTED]
- Original Message ----- From: Eric Swartz - WA6HHQ, Elecraft
To: David Ferrington, M0XDF
Cc: Elecraft Reflector
Sent: Wednesday, 19 December, 2007 16:54
Subject: Re: [Elecraft] [K3] #174 band limits
Please note that the K3 -always- blocks high power TX
Guys - Let's end this thread. It is one of those that will repeat
forever ;-)
The K3 was primarily designed for ham band coverage with a wider general
coverage receive. Its not guaranteed to TX at full power everywhere
outside the ham bands when so enabled, though it should cover most MARS
fr
Guys - Seriously, let's end this thread for now.
73, Eric WA6HHQ
Elecraft List Moderator
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
I see Lisa missed posting that our Aptos HQ would be closed Monday and
Tuesday, 12/24-25, for the holiday. We're giving our staff (several of
whom were in the plant this weekend working on K3s) a well needed 2 days
off.
We will be back in the office on Wednesday and we will also be updating
Hi John,
The 1N5238 is an equivalent manufacturing substitution for the 1N5235.
Go ahead and use it for D3.
We'll update the XV222 errata to cover this. Sorry for he confusion!
73, Eric WA6HHQ
John Hoaglun wrote:
Hello fellow builders:
I am building an xv222 transverter. The last ste
CORRECTION - My last email was in error. (Our manufacturing department
misunderstood my question on this.)
We are NOT shipping 1N5238 diodes in the XV222 kit.
The correct part for D3 is the 1N5235B. We just checked and this is the
part for D3 packed in our current stock of XV222 kits.
John -
Since the K3 is also compatible with the other Heil Proset boom mic
headsets that use the HC4 and HC5 elements, which model does everyone
like? Any favorite models?
Its not practical for us to carry them all, but I'd like to add at least
one or two of the more popular versions to our product l
We've just updated the K3 shipping Status Page.
Shipping for the weeks of Jan 2-4 and 7-11:
(Orders with deposits):
We have a short shipping week next week, due to the New Year's holiday
on 12/31-1/1, but we are still working over this next weekend (Dec
29-30) to get ahead. We're ramping up
Yes! :-)
73, Eric
_..._
Ed Rodriguez wrote:
Will Elecraft be sending reps to the Orlando Ham Cation Feb, 8, 9, 10
2008 in Orlando Florida?
73 de WP4o
Ed
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post t
This is exactly what we can do with the 8 band TX EQ built into the K3 :-)
73, Eric WA6HHQ
===
AD6XY - Mike wrote:
It would be more appropriate to design a sophisticated DSP based microphone
equallizer that could take a professional quality microphone, that is one
with a flat and uncoloured res
Here 's a link to some pictures of our test engineering group cranking
out K3s. :-)
http://www.elecraft.com/K3/elecraft_k3_test_lab.htm
This should give you a feel for our test station set up. All of the
Agilent/HP test equipment and the K3 under final test is controlled from
a PC test progra
Absolutely! We also have wrist straps at each station which are used
when handling bare boards and static sensitive components. The tech's
also are continually in contact with the mat and grounded test gear.
73, Eric
Jay Bromley wrote:
I bet those blue mats under the rigs are anti static
Hi Joe,
Yes it does.
73, Eric WA6HHQ
---
Joseph Trombino Jr wrote:
Does the Elecraft MH2 hand mike contain an electret mike element???
73, Joe W2KJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
I believe this indicates that you have set the H/W NB threshold or width
to too high of a value for your current noise or signal levels, which
has the noise blanker activated a majority of the time. This will
usually cause an unacceptable amount of intermodulation from adjacent
signals.
Reduc
We are without power today in Aptos due to the major winter storm hitting CA..
We're down to one working phone line and our computers are off line. (I'm
sending this from my cell phone.) We'll probably be down the rest of the day.
Our web page and on-line order page are OK as they are hosted a
We have just released the Mac OSX version of the K3 Utility program for
downloading K3 firmware.
A big thank you to it author, David Fleming, W4SMT, who put in a huge
effort to get it done. Thanks David!
It can be found at:
http://www.elecraft.com/K3/k3_software.htm
73, Eric WA6HHQ
(And th
Yes, it returned very late last night. :-)
73, Eric WA6HHQ
_..._
Don Ehrlich wrote:
Anybody know if power is back on at the big-E?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscrib
1 - 100 of 2742 matches
Mail list logo
