Hi Alexandre,
On Thursday 09 January 2014 14:31:22 Alexandre Belloni wrote:
> Sorry to chime in only now but it seems that this series is breaking the
> touchscreen calibration on 3.13 (and -rc7 is out so it might be too
> late).
>
> At first, I though I became a terrible clicker ;) but I found so
On Thu, Jan 09, 2014 at 09:05:05PM +, KY Srinivasan wrote:
> >
> > We've had this discussion before where you urge me to trust the host...
>
> I am just implementing the protocol specification given by the host. If I
> cannot trust the
> specified protocol, I am not sure what else can be don
On 2014-01-09 22:58, Michal Kwiatkowski wrote:
Fixed a coding style issues.
Signed-off-by: Michal Kwiatkowski
---
drivers/staging/comedi/drivers/amcc_s5933.h |8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/amcc_s5933.h
b/drivers/
On 2014-01-09 22:46, Rostislav Lisovy wrote:
This patch adds Comedi driver for Humusoft MF634 (PCIe) and
MF624 (PCI) data acquisition cards. The legacy card Humusoft
MF614 is not supported. More info about the cards may be found
at http://humusoft.cz/produkty/datacq/
The driver was tested with bo
On 2014-01-10 03:59, Chase Southwood wrote:
This patch for 8255.c fixes a spacing warning found by checkpatch.pl.
Signed-off-by: Chase Southwood
---
drivers/staging/comedi/drivers/8255.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/comedi/drivers/
On Mon, 2013-12-23 at 17:52 +0800, rogera...@realtek.com wrote:
> From: Roger Tseng
>
> Realtek USB card reader provides a channel to transfer command or data to
> flash
> memory cards. This driver exports host instances for mmc and memstick
> subsystems
> and handles basic works.
Thank you fo
On Mon, 2013-12-23 at 17:52 +0800, rogera...@realtek.com wrote:
> From: Roger Tseng
>
> Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
> USB card reader MFD driver.
>
> Signed-off-by: Roger Tseng
> +#ifdef DEBUG
Dynamic debugging would be nice.
> +static void s
Due to the voltage divider on the HPD line, the HDMI connector on
imx6q-sabrelite doesn't reliably detect connected DVI monitors.
This patch allows to use the RX_SENSE0 signal as a workaround when
enabled by a boolean device tree property 'hpd-unreliable'.
Signed-off-by: Philipp Zabel
---
This pa
On Fri, Jan 10, 2014 at 03:22:24PM +0100, Philipp Zabel wrote:
> Due to the voltage divider on the HPD line, the HDMI connector on
> imx6q-sabrelite doesn't reliably detect connected DVI monitors.
> This patch allows to use the RX_SENSE0 signal as a workaround when
> enabled by a boolean device tre
On Thu, Jan 02, 2014 at 07:10:55PM -0800, Greg Kroah-Hartman wrote:
> On Thu, Jan 02, 2014 at 09:27:58PM +, Russell King wrote:
> > Subsystems such as ALSA, DRM and others require a single card-level
> > device structure to represent a subsystem. However, firmware tends to
> > describe the ind
On Fri, Jan 10, 2014 at 07:07:02AM -0800, Greg Kroah-Hartman wrote:
> On Fri, Jan 10, 2014 at 02:54:44PM +, Russell King - ARM Linux wrote:
> > Greg,
> >
> > Not sure if you saw the outcome to your comment above. My conclusion
> > was:
> >
> > "Yes, I'm coming to that conclusion as well. It
On Fri, Jan 10, 2014 at 02:54:44PM +, Russell King - ARM Linux wrote:
> On Thu, Jan 02, 2014 at 07:10:55PM -0800, Greg Kroah-Hartman wrote:
> > On Thu, Jan 02, 2014 at 09:27:58PM +, Russell King wrote:
> > > Subsystems such as ALSA, DRM and others require a single card-level
> > > device st
From: Philipp Zabel
Even though we do not enable the hardware double buffering feature
right now, set the second base address pointer (EBA1) as well to
increase robustness.
Signed-off-by: Philipp Zabel
Signed-off-by: Lucas Stach
---
drivers/staging/imx-drm/ipuv3-plane.c | 7 +--
1 file ch
These patches fix the issue of frame buffer offsets being forgotten
during crtc pageflip. Also we set the second buffer address.
v2: proper changelogs, no functional change
Lucas Stach (2):
staging: drm/imx: handle framebuffer offsets correctly
staging: drm/imx: don't drop crtc offsets when d
CRTC offsets are only set with the initial modeset, any
subseqent pageflips assume them to be kept the same, so
we need to remember the current state until another modeset
changes it.
Signed-off-by: Philipp Zabel
Signed-off-by: Lucas Stach
---
drivers/staging/imx-drm/ipuv3-crtc.c | 3 ++-
driv
We didn't take the pixel format into account, so x-direction
offsets were off by a factor of 2 or 4 for 16bpp and 32bpp
framebuffers.
Signed-off-by: Philipp Zabel
Signed-off-by: Lucas Stach
---
drivers/staging/imx-drm/ipuv3-plane.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff -
On Fri, Jan 10, 2014 at 03:11:23PM +, Russell King - ARM Linux wrote:
> On Fri, Jan 10, 2014 at 07:07:02AM -0800, Greg Kroah-Hartman wrote:
> > On Fri, Jan 10, 2014 at 02:54:44PM +, Russell King - ARM Linux wrote:
> > > Greg,
> > >
> > > Not sure if you saw the outcome to your comment abov
On Fri, Jan 10, 2014 at 07:35:30AM -0800, Greg Kroah-Hartman wrote:
> On Fri, Jan 10, 2014 at 03:11:23PM +, Russell King - ARM Linux wrote:
> > On Fri, Jan 10, 2014 at 07:07:02AM -0800, Greg Kroah-Hartman wrote:
> > > On Fri, Jan 10, 2014 at 02:54:44PM +, Russell King - ARM Linux wrote:
> >
On Fri, Jan 10, 2014 at 07:35:30AM -0800, Greg Kroah-Hartman wrote:
> > I'll sort out a new set of patches today, along with a branch to pull if
> > you wish to take them that way.
>
> It's too late for 3.14, as my tree is now closed for that because 3.13
> should be out this weekend. But I'll be
On Fri, Jan 10, 2014 at 07:30:21PM +0100, Robert Schwebel wrote:
> On Fri, Jan 10, 2014 at 07:35:30AM -0800, Greg Kroah-Hartman wrote:
> > > I'll sort out a new set of patches today, along with a branch to pull if
> > > you wish to take them that way.
> >
> > It's too late for 3.14, as my tree is
There are leaks of resources allocated by wlan_setup() and usb_dev refcnt
on failure paths in prism2sta_probe_usb().
The patch adds appropriate deallocations and removes invalid code
from hfa384x_corereset() failure handling.
unregister_wlandev() is wrong because it is not registered yet.
hfa384x_
On Fri, Jan 10, 2014 at 12:42:59PM -0800, Greg Kroah-Hartman wrote:
> On Fri, Jan 10, 2014 at 07:30:21PM +0100, Robert Schwebel wrote:
> > On Fri, Jan 10, 2014 at 07:35:30AM -0800, Greg Kroah-Hartman wrote:
> > > > I'll sort out a new set of patches today, along with a branch to pull if
> > > > you
This patch fixes two spaces at the start of the line aswell as all space after
opening parenthesis and space before closeing parenthesis checkpatch.pl warnings
in rtw_mlme.h
Signed-off-by: Tim Jester-Pfadt
---
drivers/staging/rtl8188eu/include/rtw_mlme.h | 24
1 file cha
This patch fixed spelling typo in comment and printks
withing staging/bcm.
Signed-off-by: Masanari Iida
---
drivers/staging/bcm/Adapter.h | 2 +-
drivers/staging/bcm/Bcmchar.c | 6 +++---
drivers/staging/bcm/PHSModule.c | 4 ++--
drivers/staging/bcm/nvm.c | 10 +-
4 files ch
On Fri, Jan 10, 2014 at 03:22:24PM +0100, Philipp Zabel wrote:
> Due to the voltage divider on the HPD line, the HDMI connector on
> imx6q-sabrelite doesn't reliably detect connected DVI monitors.
> This patch allows to use the RX_SENSE0 signal as a workaround when
> enabled by a boolean device tre
This patch for ni_mio_common.c removes extra whitespace causing
checkpatch.pl warnings.
Signed-off-by: Chase Southwood
---
drivers/staging/comedi/drivers/ni_mio_common.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c
b/dr
This patch for ni_mio_common.c fixes several indentation warnings from
checkpatch.pl.
Signed-off-by: Chase Southwood
---
drivers/staging/comedi/drivers/ni_mio_common.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c
b/dr
This patch for ni_mio_common.c removes many unneccesary braces to fix
checkpatch.pl warnings.
Signed-off-by: Chase Southwood
---
drivers/staging/comedi/drivers/ni_mio_common.c | 124 +
1 file changed, 43 insertions(+), 81 deletions(-)
diff --git a/drivers/staging/comedi/
28 matches
Mail list logo
