A 'Missing a blank line after declarations' warning fixed by inserting
a blank line after struct pointer declaration.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/amplc_pc236.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/comedi/drivers/amplc_
A 'line over 80 characters' fixed by removing comment to
previous line.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/amcc_s5933.h |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/amcc_s5933.h
b/drivers/staging/come
A 'line over 80 characters' fixed by removing comment to the previous
line.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/amcc_s5933.h |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/amcc_s5933.h
b/drivers/stag
An issue in 'line over 80 characters' fixed by removing over-lined comment
to the previous line.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adv_pci1710.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adv_pc
A 'line over 80' issue fixed, by removing comment to previous line. And
also, by this, 'a blank line' isssue resolved.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adv_pci1710.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/dr
An issue in 'line over 80 characters' fixed by removing over-lined
comment to the previous line.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adv_pci1710.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pc
An issue in 'line over 80 characters' fixed by taking back over-lined comment
a few characters.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adv_pci1710.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pc
An issue in 'line over 80 characters' fixed and over-lined comment
removed to the previous line.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adv_pci1710.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pc
By removing a comment to previous line, 'line over 80' issue
fixed.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adv_pci1710.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c
b/drivers/staging/come
A 'line over 80 characters' fixed by removing over-lined comment
to previous line.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adv_pci1710.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c
b/drive
a line over 80 issue fixed by removing the cross-lined comment
to the previous line.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adv_pci1710.c |5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c
b/drivers
A line over 80 issue fixed, which is a comment.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adv_pci1710.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c
b/drivers/staging/comedi/drivers/adv_pci1710.c
index
A 'Missing a blank line after declarations' issue fixed and also tested
by 'make M=...'. It seems that after 'unsigned long iobase' declaration
a blank line is desperately needed.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/8255.c | 1 +
1 file
Introductory comments organized according to Linux's comment
coding style.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adl_pci9118.c | 109 +-
1 file changed, 55 insertions(+), 54 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9118
A 'line over 80 characters' issue fixed.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adl_pci9118.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c
b/drivers/staging/comedi/drivers/adl_pci9118.c
ind
A 'quoted string split across lines' issue fixed, while a better use of
language applied to the comment.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adl_pci9118.c |3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/a
a 'quoted string split across lines' fixed while better use of
English applied to the text.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adl_pci9118.c |3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c
For better use of English, 'mixtured' which is not right, replaced
by 'mixed'.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adl_pci9118.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c
b/dr
a fractured spelling in previous style issue fix mended.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adl_pci9118.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c
b/drivers/staging/comedi/drivers/adl_pci9118.c
2 style issues fixed: one misspelling & a quoted string split across lines.
Sam Asadi (2):
Staging: comedi: adl_pci9118: a style issue fixed
Staging: comedi: adl_pci9118: fractured spelling fixed
drivers/staging/comedi/drivers/adl_pci9118.c |3 +--
1 file changed, 1 insertion(+
'quoted string split across lines' warning in checkpatching fixed
by group whole string in one line.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adl_pci9118.c |3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pc
'quoted string split across lines' warning in checkpatching fixed
by group whole string in one line.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/adl_pci9118.c |3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pc
From: "K. Y. Srinivasan"
Starting with Win8, we have implemented several optimizations to improve the
scalability and performance of the VMBUS transport between the Host and the
Guest. Some of the non-performance critical services cannot leverage these
optimization since they only read and proces
From: Enric Balletbo i Serra
As this board use external clock for RMII interface we should specify 'rmii'
phy mode and 'rmii-clock-ext' to make ethernet working.
Signed-off-by: Enric Balletbo i Serra
Signed-off-by: Tony Lindgren
Signed-off-by: sam-the-6
---
arch/arm/boot/dts/am335x-igep0033.
From: Himangi Saraogi
devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure.
A simplified version of the semantic match that finds this problem is as
follows:
//
@@
expression e,e1;
statement S;
@@
*e = devm_ioremap_resource(...);
if (!e1) S
//
Signed-off-by: Himangi Saraogi
From: Sachin Kamat
IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored
the actual return values (which could be -EINVAL) and instead
returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value
obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO
upon succes
From: Horia Geanta
Object-like macros are different than function-like macros:
https://gcc.gnu.org/onlinedocs/cpp/Object-like-Macros.html
https://gcc.gnu.org/onlinedocs/cpp/Function-like-Macros.html
They are not parsed correctly, generating invalid intermediate
files (xmls) for cases like:
#
From: Bernd Wachter
Add ID of the Telewell 4G v2 hardware to option driver to get legacy
serial interface working
Signed-off-by: Bernd Wachter
Cc:
Signed-off-by: Johan Hovold
Signed-off-by: sam-the-6
---
drivers/usb/serial/option.c |2 ++
1 file changed, 2 insertions(+)
diff --git a/dr
From: Peter Hurley
Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c,
'serial_core: Fix conditional start_tx on ring buffer not empty'
exposes an incorrect assumption in several drivers' start_tx methods;
the tx ring buffer can, in fact, be empty when restarting tx while
performing flow control.
A
From: Maxime Ripard
The driver depend on the reset framework in a mandatory way. Make sure
reset_control_get is defined by adding this dependency in Kconfig
Signed-off-by: Maxime Ripard
Reported-by: Arnd Bergmann
Signed-off-by: Kishon Vijay Abraham I
Signed-off-by: Greg Kroah-Hartman
Signed-
From: "K. Y. Srinivasan"
Add code to poll the channel since we process only one message
at a time and the host may not interrupt us. Also increase the
receive buffer size since some KVP messages are close to 8K bytes in size.
Signed-off-by: K. Y. Srinivasan
Cc:
Signed-off-by: Greg Kroah-Hartma
a revision to the file that previously had several style issues.
It's clean now.
Signed-off-by: Sam Asadi
Signed-off-by: sam-the-6
---
drivers/staging/comedi/drivers/8253.h |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/comedi/drivers/8253.h
b/drivers/staging/c
From: Jyri Sarha
This code is not working currently and it can be removed. There is a
conflict in sharing resources with the actual HDMI driver and with
the ASoC HDMI audio DAI driver.
Signed-off-by: Jyri Sarha
Signed-off-by: Tony Lindgren
Signed-off-by: sam-the-6
---
arch/arm/mach-omap2/dev
From: Guenter Roeck
Commit f36fdb9f0266 (i8k: Force SMM to run on CPU 0) adds support
for multi-core CPUs to the driver. Unfortunately, that causes it
to fail loading if compiled without SMP support, at least on
32 bit kernels. Kernel log shows "i8k: unable to get SMM Dell
signature", and functio
From: Guido Martínez
Currently, child nodes of the gpmc node are iterated and probed
regardless of their 'status' property. This means adding 'status =
"disabled";' has no effect.
This patch changes the iteration to only probe nodes marked as
available.
Signed-off-by: Guido Martínez
Tested-by:
From: Russell King
The revision checking in l2c310_enable() was not correct; we were
masking the part number rather than the revision number. Fix this
to use the correct macro.
Fixes: 4374d64933b1 ("ARM: l2c: add automatic enable of early BRESP")
Signed-off-by: Russell King
Signed-off-by: sam-
From: Tushar Behera
Currently CLK_FOUT_EPLL was set as one of the parents of AUDSS mux.
As per the user manual, it should be CLK_MAU_EPLL.
The problem surfaced when the bootloader in Peach-pit board set
the EPLL clock as the parent of AUDSS mux. While booting the kernel,
we used to get a system
From: Sachin Kamat
IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored
the actual return values (which could be -EINVAL) and instead
returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value
obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO
upon succes
From: Dan Carpenter
There is a cut and paste bug here which will lead to memory corruption
because we don't allocate enough data.
Fixes: 4d008589e271 ('CLK: TI: APLL: add support for omap2 aplls')
Signed-off-by: Dan Carpenter
Signed-off-by: Tero Kristo
Signed-off-by: sam-the-6
---
drivers/cl
From: Thomas Gleixner
The control register is at offset 0x10, not 0x0. This is wreckaged
since commit 5df33a62c (SPEAr: Switch to common clock framework).
Signed-off-by: Thomas Gleixner
Cc: sta...@vger.kernel.org
Acked-by: Viresh Kumar
Signed-off-by: Mike Turquette
Signed-off-by: sam-the-6
-
From: Sachin Kamat
IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored
the actual return values (which could be -EINVAL) and instead
returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value
obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO
upon succes
From: Jon Medhurst
Due to a long-standing issue with Thumb symbol lookup [1] the jprobes
tests fail when built into a kernel compiled as Thumb mode. (They work
fine for ARM mode kernels or for Thumb when built as a loadable module.)
Rather than have this problem terminate testing prematurely let
From: Tomasz Figa
Currently, the exynos cpuidle driver works correctly only on exynos4210
and 5250. Trying to use it with just one CPU online on any other exynos
SoCs will lead to system failure, due to unsupported AFTR mode on other
SoCs. This patch fixes the problem by registering the driver on
From: Namjae Jeon
Fix potential null pointer dereferencing problem caused by e43bb4e612
("ext4: decrement free clusters/inodes counters when block group declared bad")
Reported-by: Dan Carpenter
Signed-off-by: Namjae Jeon
Signed-off-by: Ashish Sangwan
Signed-off-by: Theodore Ts'o
Reviewed-by
From: Bo Shen
Add clocks for usb device, or else switch to CCF, the gadget
won't work.
Reported-by: Jiri Prchal
Signed-off-by: Bo Shen
Acked-by: Alexandre Belloni
Tested-by: Jiri Prchal
Signed-off-by: Nicolas Ferre
Signed-off-by: Olof Johansson
Signed-off-by: sam-the-6
---
arch/arm/boot/
From: Geert Uytterhoeven
When a module calls random_get_entropy():
ERROR: "mach_random_get_entropy" [crypto/drbg.ko] undefined!
make[1]: *** [__modpost] Error 1
Signed-off-by: Geert Uytterhoeven
Signed-off-by: sam-the-6
---
arch/m68k/kernel/time.c |2 ++
1 file changed, 2 inserti
From: Eric Sandeen
The mount manpage says of the max_batch_time option,
This optimization can be turned off entirely
by setting max_batch_time to 0.
But the code doesn't do that. So fix the code to do
that.
Signed-off-by: Eric Sandeen
Signed-off-by: Theodore Ts'o
Cc: sta...@
From: Helge Deller
On parisc we can not use the existing compat implementation for fanotify_mark()
because for the 64bit mask parameter the higher and lower 32bits are ordered
differently than what the compat function expects from big endian
architectures.
Specifically:
It finally turned out, th
From: Helge Deller
Signed-off-by: Helge Deller
Cc: sta...@vger.kernel.org # 3.13+
Signed-off-by: sam-the-6
---
arch/parisc/kernel/hardware.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c
index 608716f..af3
From: Peter Hurley
Replace open-coded test for empty tx ring buffer with equivalent
helper function, uart_circ_empty(). No functional change.
Signed-off-by: Peter Hurley
Signed-off-by: Greg Kroah-Hartman
Signed-off-by: sam-the-6
---
drivers/tty/serial/arc_uart.c |2 +-
1 file changed, 1
From: Sjoerd Simons
Allow phy-exynos-usb2 to be autoloaded based on devicetree information.
Tested on Odroid X2 with its USB subsystem build as modules.
Signed-off-by: Sjoerd Simons
Signed-off-by: Kishon Vijay Abraham I
Signed-off-by: Greg Kroah-Hartman
Signed-off-by: sam-the-6
---
drivers/
From: Peter Ujfalusi
The use of FIFO in McASP can reduce the risk of audio under/overrun and
lowers the load on the memories since the DMA will operate in bursts.
Signed-off-by: Peter Ujfalusi
Signed-off-by: Tony Lindgren
Signed-off-by: sam-the-6
---
arch/arm/boot/dts/am335x-evmsk.dts |4
From: Andras Kovacs
Corsair USB Dongles are shipped with Corsair AXi series PSUs.
These are cp210x serial usb devices, so make driver detect these.
I have a program, that can get information from these PSUs.
Tested with 2 different dongles shipped with Corsair AX860i and
AX1200i units.
Signed-o
From: Jon Medhurst
Conditionally compile kprobes test cases for ARMv5 instructions to avoid
compilation errors with ARMv4 targets like:
/tmp/cc7Tx8ST.s:16740: Error: selected processor does not support ARM mode `clz
r0,r0'
Signed-off-by: Jon Medhurst
Signed-off-by: sam-the-6
---
arch/arm/ke
From: Doug Anderson
In (93bfb76 clocksource: exynos_mct: register sched_clock callback) we
supported using the MCT as a scheduler clock. We properly marked
exynos4_read_sched_clock() as notrace. However, we then went and
called another function that _wasn't_ notrace. That means if you do:
c
From: Sachin Kamat
IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored
the actual return values (which could be -EINVAL) and instead
returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value
obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO
upon succes
From: Krzysztof Kozlowski
After unbinding the driver memory was corrupted by double free of
clk_lookup structure. This lead to OOPS when re-binding the driver
again.
The driver allocated memory for 'clk_lookup' with devm_kzalloc. During
driver removal this memory was freed twice: once by clkdev_
From: Russell King - ARM Linux
I received a report this morning from one of the Novena developers that
the behaviour of the iMX6 ASoC codec driver (using imx-pcm-dma.c) was
sub-optimal under high system load.
While there are issues relating to system load remaining, upon reviewing
the ASoC imx-p
From: Vasily Khoruzhick
There's a several typos in a driver: 2410 instead of S3C2410
and wrong argument to ARRAY_SIZE(). They prevent s3c2410
from properly booting.
Signed-off-by: Vasily Khoruzhick
Reviewed-by: Heiko Stuebner
Signed-off-by: Tomasz Figa
Signed-off-by: sam-the-6
---
drivers/c
From: Arun Kumar K
Adds IDs for MUX clocks to be used by power domain for MFC
for doing re-parenting while pd on/off.
Signed-off-by: Arun Kumar K
Signed-off-by: Shaik Ameer Basha
Acked-by: Tomasz Figa
Signed-off-by: Kukjin Kim
Signed-off-by: sam-the-6
---
drivers/clk/samsung/clk-exynos5420
From: Nishanth Menon
omap44xx_restart is defined as a static void inline when DRA7/AM437X is
defined alone, which implies that the restart function is no longer
functional even though it is built in. So, fix the definition of the
same.
Signed-off-by: Nishanth Menon
Signed-off-by: Tony Lindgren
From: Rajendra Nayak
Without the patch:
/debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate
53200
/debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate
53200
/debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat
clk_rate
53200
Wi
From: Roger Quadros
Add the sysconfig class bits for the Super Speed USB
controllers
Signed-off-by: Roger Quadros
Reviewed-by: Rajendra Nayak
Tested-by: Sekhar Nori
Signed-off-by: Paul Walmsley
Signed-off-by: sam-the-6
---
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 12
1 fi
From: Jon Medhurst
ARM data processing instructions which have a register specified shift
are defined as UNPREDICTABLE if PC is used for any register, not just
the shift value as the code was previous assuming. This issue manifests
on A15 devices as either test case failures or undefined instruct
several style issues fixed.
Signed-off-by: Sam Asadi
modified: drivers/staging/comedi/drivers/adl_pci9118.c
Signed-off-by: sam-the-6
---
drivers/staging/comedi/drivers/adl_pci9118.c | 124 +-
1 file changed, 62 insertions(+), 62 deletions(-)
diff --git a
From: Peter Hurley
Fix breakage introduced by
commit c557d392fbf5badd693ea1946a4317c87a26a716,
'serial: Test for no tx data on tx restart'.
Reported-by: Stephen Rothwell
Signed-off-by: Peter Hurley
Signed-off-by: Greg Kroah-Hartman
Signed-off-by: sam-the-6
---
drivers/tty/serial/imx.c |
a revision to the file that previously had several style issues.
It's clean now.
Signed-off-by: Sam Asadi
---
drivers/staging/comedi/drivers/8253.h |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/comedi/drivers/8253.h
b/drivers/staging/comedi/drivers/8253.h
index 31
From: Theodore Ts'o
Commit 007649375f6af2 ("ext4: initialize multi-block allocator before
checking block descriptors") causes the block group descriptor's count
of the number of free blocks to become inconsistent with the number of
free blocks in the allocation bitmap. This is a harmless form of
From: Linus Torvalds
Signed-off-by: sam-the-6
---
Makefile |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 2167084..f3c543d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 16
SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EX
From: Bert Vermeulen
This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the
Testo 435-4 uses this, likely other gear as well.
Signed-off-by: Bert Vermeulen
Cc: Johan Hovold
Cc: stable
Signed-off-by: Greg Kroah-Hartman
Signed-off-by: sam-the-6
---
drivers/usb/serial/ftdi_sio.c
From: Masanari Iida
This patch fixed spelling typo found in DocBook/mtdnand.tmpl.
Signed-off-by: Masanari Iida
Signed-off-by: Randy Dunlap
Signed-off-by: Linus Torvalds
Signed-off-by: sam-the-6
---
Documentation/DocBook/mtdnand.tmpl | 30 +++---
1 file changed, 15
From: Peter Meerwald
Signed-off-by: Peter Meerwald
Signed-off-by: Jonathan Cameron
Signed-off-by: sam-the-6
---
drivers/iio/light/tcs3472.c | 11 ++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c
index fe063a0
From: Roger Quadros
If probe fails then we need to call pm_runtime_disable() to balance
out the previous pm_runtime_enable() call. Else it will cause
unbalanced pm_runtime_enable() call in the succeding probe call.
This anomaly was observed when the call to devm_phy_create() failed
with -EPROBE_
From: Roger Quadros
Prevent resources from being freed twice in case device_add() call
fails within phy_create(). Also use ida_simple_remove() instead of
ida_remove() as we had used ida_simple_get() to allocate the ida.
Cc: 3.13+ # 3.13+
Signed-off-by: Roger Quadros
Signed-off-by: Kishon Vijay
From: Sachin Kamat
IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored
the actual return values (which could be -EINVAL) and instead
returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value
obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO
upon succes
From: Masanari Iida
This patch fixed spelling typo in various template files
within Documentation/Docbook.
Signed-off-by: Masanari Iida
Signed-off-by: Randy Dunlap
Signed-off-by: Linus Torvalds
Signed-off-by: sam-the-6
---
Documentation/DocBook/gadget.tmpl |2 +-
Documen
From: Roger Quadros
After clarification from the hardware team it was found that
this 1.8V PHY supply can't be switched OFF when SoC is Active.
Since the PHY IPs don't contain isolation logic built in the design to
allow the power rail to be switched off, there is a very high risk
of IP reliabil
From: Jan Kardell
Since AI lines could be selected at will (linux-3.11) the sending
and receiving ends of the FIFO does not agree about what step is used
for a line. It only works if the last lines are used, like 5,6,7,
and fails if ie 2,4,6 is selected in DT.
Signed-off-by: Jan Kardell
Tested-
3 files in 'staging/comedi/drivers/' revised again
and style issues fixed
Signed-off-by: Sam Asadi
modified: drivers/staging/comedi/drivers/8253.h
modified: drivers/staging/comedi/drivers/8255.c
modified: drivers/staging/comedi/drivers/adl_pci9118.c
Sig
From: Geert Uytterhoeven
My enhancement to store the initial mapping size for later reuse in commit
486df8bc4627bdfc032d11bedcd056cc5343ee62 ("m68k: Increase initial mapping
to 8 or 16 MiB if possible") broke booting on machines where RAM doesn't
start at address zero.
Use pc-relative addressing
From: Peter Ujfalusi
The use of FIFO in McASP can reduce the risk of audio under/overrun and
lowers the load on the memories since the DMA will operate in bursts.
Signed-off-by: Peter Ujfalusi
Signed-off-by: Tony Lindgren
Signed-off-by: sam-the-6
---
arch/arm/boot/dts/am335x-evm.dts |4 +
From: Theodore Ts'o
The first time that we allocate from an uninitialized inode allocation
bitmap, if the block allocation bitmap is also uninitalized, we need
to get write access to the block group descriptor before we start
modifying the block group descriptor flags and updating the free block
From: Arun Kumar K
Adding the optional clock property for the mfc_pd for
handling the re-parenting while pd on/off.
Signed-off-by: Arun Kumar K
Signed-off-by: Shaik Ameer Basha
Reviewed-by: Tomasz Figa
Signed-off-by: Kukjin Kim
Signed-off-by: sam-the-6
---
arch/arm/boot/dts/exynos5420.dtsi
From: Sachin Kamat
Almost all Exynos-series of SoCs that run in secure mode don't need
additional offset for every CPU, with Exynos4412 being the only
exception.
Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420).
While at it, fix the coding style (space around *).
Signed-off-by:
From: Tero Kristo
The divider value provided to the _dpll_test_fint can reach value of
256 with J type DPLLs (USB etc.), which causes an overflow with the u8
datatype. Fix this by changing the parameter to be an int instead.
Signed-off-by: Tero Kristo
[p...@pwsan.com: changed type of 'n' to uns
From: Michal Sojka
This adds support for Infineon TriBoard TC1798 [1]. Only interface 1
is used as serial line (see [2], Figure 8-6).
[1]
http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-eva
From: Suman Anna
The DSP platform device for TI DSP/Bridge is currently
created unconditionally whenever CONFIG_TIDSPBRIDGE is
enabled. This device should only be created on OMAP34xx/
OMAP36xx SoCs, and not for other OMAP3 derived SoCs or when
booting multi-arch images on other SoCs. So, add a ch
From: Shawn Guo
Let's say clock A and B are two gate clocks that share the same register
bit in hardware. Therefore they are registered as shared gate clocks
with imx_clk_gate2_shared().
In a scenario that only clock A is enabled by clk_enable(A) while B is
not used, the shared gate will be une
From: Theodore Ts'o
We are spending a lot of time explaining to users what this error
means. Let's try to improve the message to avoid this problem.
Signed-off-by: Theodore Ts'o
Cc: sta...@vger.kernel.org
Signed-off-by: sam-the-6
---
fs/ext4/mballoc.c |4 ++--
1 file changed, 2 insertion
From: Pali Rohár
Dell kernel driver dell-smo8800 provides same freefall interface as hp_accel so
program hpfall.c works also on Dell laptops. So rename it to freefall.c.
Dell driver does not provide hp::hddprotect led so make sure that freefall.c
works also if hp::hddprotect does not exist in sy
From: Simon Horman
Simply document new compat strings.
There appears to be no need for a driver updates.
Signed-off-by: Simon Horman
Signed-off-by: Greg Kroah-Hartman
Signed-off-by: sam-the-6
---
Documentation/devicetree/bindings/serial/renesas,sci-serial.txt |7 +++
1 file changed,
fixed a coding style issue.
Signed-off-by: Sam Asadi
modified: drivers/staging/comedi/drivers/8255.c
Signed-off-by: sam-the-6
---
drivers/staging/comedi/drivers/8255.c | 150 -
1 file changed, 74 insertions(+), 76 deletions(-)
diff --git a/drivers
From: Suman Anna
The commit 7be914f {ARM: OMAP3: PRM/CM: Cleanup unused header} removed
some of the macros used by the TI DSP/Bridge driver. This fixes the
following build errors when trying to build DSP/Bridge driver (disabled
at present), otherwise results in the following build errors:
driver
From: Prathyush K
While powering on/off a local powerdomain in exynos5 chipsets, the
input clocks to each device gets modified. This behaviour is based
on the SYSCLK_SYS_PWR_REG registers.
E.g. SYSCLK_MFC_SYS_PWR_REG = 0x0, the parent of input clock to MFC
(aclk333) g
Signed-off-by: Sam Asadi
modified: drivers/staging/comedi/drivers/8253.h
Signed-off-by: sam-the-6
---
drivers/staging/comedi/drivers/8253.h |3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/8253.h
b/drivers/staging/comedi/drivers
From: Helge Deller
Signed-off-by: Helge Deller
Cc: sta...@vger.kernel.org # 3.13+
Signed-off-by: sam-the-6
---
arch/parisc/kernel/sys_parisc32.c | 36
1 file changed, 36 deletions(-)
diff --git a/arch/parisc/kernel/sys_parisc32.c
b/arch/parisc/kernel/sy
From: Thomas Gleixner
The uarts only work when the parent is ras_ahb_clk. The stale 3.5
based ST tree does this in the board file.
Add it to the clk init function. Not pretty, but the mess there is
amazing anyway.
Signed-off-by: Thomas Gleixner
Acked-by: Viresh Kumar
Signed-off-by: Mike Turqu
From: Roger Quadros
Get rid of optional clock as that is now managed by the
AHCI platform driver.
Correct .mpu_rt_idx to 1 as the module register space (SYSCONFIG..)
is passed as the second memory resource in the device tree.
Signed-off-by: Roger Quadros
Reviewed-by: Rajendra Nayak
Tested-by:
From: Paul Bolle
The paragraph on mcelog currently describes kernel v2.6.31. In that
kernel the mce code (for i386, that is) was in transition. Ever since
v2.6.32 the situation is much simpler (eg, mcelog is now needed to
process events on almost all x86 machines, i386 and x86-64). Since this
"do
From: Stephen Boyd
The HDMI PLL input to the tv mux is supposed to be 3, not 2. Fix
the code so that we can properly select the HDMI PLL.
Fixes: 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock
controller (MMCC)"
Reported-by: Rob Clark
Signed-off-by: Stephen Boyd
Signed-off-by
1 - 100 of 118 matches
Mail list logo
