Signed-off-by: Denis Carikli
---
drivers/gpu/ipu-v3/ipu-di.c |4 ++--
drivers/staging/imx-drm/ipuv3-crtc.c |4 ++--
include/video/imx-ipu-v3.h |8 +++-
3 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu
On 06/25/2014 06:48 AM, Sascha Hauer wrote:
+#define ENABLE_POL_LOW 0
+#define ENABLE_POL_HIGH1
Adding defines without a proper namespace (IPU_) outside a driver
private header file is not nice. Anyway, instead of adding the
defines ...
Fixed in "imx-drm: use defines for
On 06/24/2014 05:06 PM, Russell King - ARM Linux wrote:
> It would be better if you separate the
binding documentation updates from the other functional changes too.
Fixed.
Denis.
___
devel mailing list
de...@linuxdriverproject.org
http://driverdev.li
On 06/25/2014 12:04 AM, Thierry Reding wrote:
because on this very simple display board, we only have DVI LVDS signals
without the I2C to detect the display.
That's unfortunate. In that case perhaps a better approach would be to
add a video timings node to the device that provides the DVI outpu
On 06/24/2014 05:13 PM, Russell King - ARM Linux wrote:
[...]
If you'd like to send me better commit messages for
these patches, I'll add them to what I already have:
imx-drm: use defines for clock polarity settings
The comment of the clk_pol field of the ipu_di_signal_cfg struct was
On 06/16/2014 02:29 PM, Denis Carikli wrote:
[...]
Which result at the lcd regulator being physically powered on at boot.
I didn't see that because powering it on at boot is what I want.
I fixed that in imx-drm's parallel-display with another patch I just
sent separatel
If connector->dpms is left untouched, it defaults
to DRM_MODE_DPMS_ON (0).
As a result, drm_helper_connector_dpms will exit when
it will be asked to set the state to DRM_MODE_DPMS_ON,
because it is already set.
That issue prevented displays from turning on at boot.
Signed-off-by: Denis Cari
On 06/16/2014 12:11 PM, Denis Carikli wrote:> + reg_lcd_3v3: lcd-en {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
> + regulator-name = "lcd-3v3
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v13->v14:
- Rebased
ChangeLog v9->v13:
- Rebased
ChangeLog v8->v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email di
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- None
ChangeLog v11->v13:
- No changes
ChangeLog v9->v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- Rebased
ChangeLog 12->v13:
- No changes
ChangeLog 11->v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9->v10:
- New patch which was split
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- None
ChangeLog v12->v13:
- Added a note explaining why the size is zero in
the eukrea_mbimxsd51_dvi(s)vga structs.
ChangeLog v11->v12:
- Rebased: It now uses the new DRM_MODE_FLAG_POL_DE flags defines names
ChangeLog v10->v11:
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- None
ChangeLog v10->v13:
- Rebased
- Removed enable-active-high in reg_lcd_3v3: its GPIO
already has the GPIO_ACTIVE_HIGH flag.
Without this removal, the display was off at boot
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- Rebased
ChangeLog v12->v13:
- This patch doesn't need the DRM_MODE_FLAG_POL_*_PRESERVE flags anymore.
- code cleanup to improve readability:
- ENABLE_POL_PRES
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v13->v14:
- Rebased
ChangeLog v10->v13:
- Rebased
ChangeLog v9->v10:
- Rebased.
- Adde
igned-off-by: Denis Carikli
---
ChangeLog v13->v14:
- None
ChangeLog v10->v11:
- imx53-tx53-x03x.dts change was removed because it
already had the correct setting.
ChangeLog v9->v10:
- New patch that was splitted out of:
"staging imx-drm: Use de-active and pixelclk-active
display-
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
Acked-by: Philipp Zabel
---
ChangeLog v13->v14:
- None
ChangeLog v10->v13
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- Fixed DRM_MODE_FLAG_POL_DE_HIGH's description.
ChangeLog v12->v
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli
---
ChangeLog v12->v13:
- This patch doesn't need the DRM_MODE_FLAG_POL_*_PRESERVE flags anymore.
- code cleanup to improve readability:
- ENABLE_POL_PRESERVE is now gone
- Less modifica
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli
---
ChangeLog v12->v13:
- Added Docbook documentation for pol_flags the struct field.
- Removed
Signed-off-by: Denis Carikli
---
ChangeLog v11->v13:
- No changes
ChangeLog v9->v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6->v7:
- S
Signed-off-by: Denis Carikli
---
ChangeLog v12->v13:
- Added a note explaining why the size is zero in
the eukrea_mbimxsd51_dvi(s)vga structs.
ChangeLog v11->v12:
- Rebased: It now uses the new DRM_MODE_FLAG_POL_DE flags defines names
ChangeLog v10->v11:
- New patch.
---
.../bindi
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v13:
- Rebased
- Removed enable-active-high in reg_lcd_3v3: its GPIO
already has the GPIO_ACTIVE_HIGH flag.
Without this removal, the display was off at boot
and powering it off and on
igned-off-by: Denis Carikli
---
ChangeLog v10->v11:
- imx53-tx53-x03x.dts change was removed because it
already had the correct setting.
ChangeLog v9->v10:
- New patch that was splitted out of:
"staging imx-drm: Use de-active and pixelclk-active
display-timings."
---
ar
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
Acked-by: Philipp Zabel
---
ChangeLog v10->v13:
- No changes
ChangeLog v9-&
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v9->v13:
- Rebased
ChangeLog v8->v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7-&
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v10->v13:
- Rebased
ChangeLog v9->v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Incl
Signed-off-by: Denis Carikli
---
ChangeLog 12->v13:
- No changes
ChangeLog 11->v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9->v10:
- New patch which was splitted out from:
"staging: imx-drm:
On 04/08/2014 08:36 AM, Andrzej Hajda wrote:
Hi Denis,
Hi,
+#define DRM_MODE_FLAG_POL_PIXDATA_NEGEDGE BIT(1)
+#define DRM_MODE_FLAG_POL_PIXDATA_POSEDGE BIT(2)
+#define DRM_MODE_FLAG_POL_PIXDATA_PRESERVE BIT(3)
What is the purpose of DRM_MODE_FLAG_POL_PIXDATA_PRESERVE?
If 'pres
The DRM_PANEL_SIMPLE is needed by the eukrea
mbimxsd51's displays.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- New patch, splitting it would be overkill.
---
arch/arm/configs/imx_v6_v7_defconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm
Signed-off-by: Denis Carikli
---
ChangeLog v9->v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeL
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli
---
ChangeLog v11->v12:
- Rebased: It now uses the following new flags defines names:
CLK_POL, ENABLE_POL
- The inversions in ipuv3-crtc.c are now fixed.
- ipuv3-crtc.c was still using m
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- Now uses the drm-panel instead of the display-timings.
This is to get regulator support, which is lacking in
the imx-drm driver when using the display-timings.
ChangeLog v9->v10:
- R
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli
---
ChangeLog v11->v12:
- Rebased: This patch now applies against drm_modes.h
- Rebased: It now uses
Signed-off-by: Denis Carikli
---
ChangeLog v11->v12:
- Rebased: It now uses the new DRM_MODE_FLAG_POL_DE flags defines names
ChangeLog v10->v11:
- New patch.
---
.../bindings/panel/eukrea,mbimxsd51-cmo-qvga.txt |7 ++
.../bindings/panel/eukrea,mbimxsd51-dvi-svga.txt
igned-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that was splitted out of:
"staging imx-drm: Use de-active and pixelclk-active
display-timings."
---
arch/arm/boot/dts/imx51-babbage.dts |2 ++
arch/arm/boot/dts/imx53-m53evk.dts|2 ++
arch/arm/b
Signed-off-by: Denis Carikli
---
ChangeLog 11->v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9->v10:
- New patch which was splitted out from:
"staging: imx-drm: Use de-active and pixelclk-act
According to the datasheet, setting the di0_polarity_disp_clk
field in the GENERAL di register sets the output clock polarity
to active high.
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that is now needed by the
"staging: imx-drm: Use de-active and pixelclk-activ
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Included Lothar Waßmann's suggest
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v8->v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7->v8:
- Shrinked even mo
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased on top of:
"211e7f
The DRM_PANEL_SIMPLE is needed by the eukrea
mbimxsd51's displays.
Signed-off-by: Denis Carikli
---
- New patch, splitting it would be overkill.
---
arch/arm/configs/imx_v6_v7_defconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig
b/arc
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- Now uses the drm-panel instead of the display-timings.
This is to get regulator support, which is lacking in
the imx-drm driver when using the display-timings.
ChangeLog v9->v10:
- R
Signed-off-by: Denis Carikli
---
ChangeLog v9->v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeL
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- New patch.
---
.../bindings/panel/eukrea,mbimxsd51-cmo-qvga.txt |7 ++
.../bindings/panel/eukrea,mbimxsd51-dvi-svga.txt |7 ++
.../bindings/panel/eukrea,mbimxsd51-dvi-vga.txt|7 ++
drivers/gpu/drm/panel/panel-simpl
igned-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that was splitted out of:
"staging imx-drm: Use de-active and pixelclk-active
display-timings."
---
arch/arm/boot/dts/imx51-babbage.dts |2 ++
arch/arm/boot/dts/imx53-m53evk.dts|2 ++
arch/arm/b
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch which was splitted out from:
"staging: imx-drm: Use de-active and pixelclk-active display-timings.".
- Fixes many issues in "staging: imx-drm: Use de-active and pixelclk-active
display-timings.":
- Mo
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- This patch was splitted-out and adapted from:
"Prepare imx-drm for extra display-timings retrival."
- The display-timings dt specific part was removed.
- Th
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Included Lothar Waßmann's suggest
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v8->v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7->v8:
- Shrinked even mo
According to the datasheet, setting the di0_polarity_disp_clk
field in the GENERAL di register sets the output clock polarity
to active high.
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that is now needed by the
"staging: imx-drm: Use de-active and pixelclk-activ
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- Since the imx-drm won't be able to retrive its regulators
from the dev
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased on top of:
"211e7f
On 03/06/2014 05:26 PM, Philipp Zabel wrote:
Hi Denis,
Hi,
Does this board really have a DVI connector and no I2C bus routed to the
DDC pins?
Yes, I2C is not routed to the DVI connector.
Denis.
___
devel mailing list
de...@linuxdriverproject.org
ht
igned-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that was splitted out of:
"staging imx-drm: Use de-active and pixelclk-active
display-timings."
---
arch/arm/boot/dts/imx51-babbage.dts |2 ++
arch/arm/boot/dts/imx53-m53evk.dts|2 ++
arch/arm/b
The hardware behaviour was kept.
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that was splitted out of
"staging: imx-drm: Use de-active and pixelclk-active
display-timings."
- The IMXDRM_MODE_FLAG_ are now using the BIT macros.
- The SET_CLK_POL and SET_DE_P
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch which was splitted out from:
"staging: imx-drm: Use de-active and pixelclk-active display-timings.".
- Fixes many issues in "staging: imx-drm: Use de-active and pixelclk-active
display-timings.":
- Mo
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Included Lothar Waßmann's suggest
According to the datasheet, setting the di0_polarity_disp_clk
field in the GENERAL di register sets the output clock polarity
to active high.
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that is now needed by the
"staging: imx-drm: Use de-active and pixelclk-activ
If de-active and/or pixelclk-active properties were set in the
display-timings DT node, they were not used.
Instead the data-enable and the pixel data clock polarity
were hardcoded.
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch from what's left of:
"staging: im
imx_drm_of_get_extra_timing_flags will be used to
retrive the native-mode and de-active display-timings
node properties in the device tree.
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that was splitted out of
"staging: imx-drm: Use de-active and pixelclk-active
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- Rebased
- Now enables the cmo-qvga regulator at boot.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- updated pixelclk-active after the following patch:
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased on top of:
"211e7f
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v8->v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7->v8:
- Shrinked even mo
Signed-off-by: Denis Carikli
---
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7->v8:
- Shrinked even more the Cc list.
- Rebased.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch and inclu
According to the datasheet, setting the di0_polarity_disp_clk
field in the GENERAL di register sets the output clock polarity
to active high.
Signed-off-by: Denis Carikli
---
ChangeLog v8->v9:
- New patch that is now needed by the
"staging: imx-drm: Use de-active and pixelclk-activ
If de-active and/or pixelclk-active properties were set in the
display-timings DT node, they were not used.
Instead the data-enable and the pixel data clock polarity
were hardcoded.
The dts were updated to keep the former behaviour.
Signed-off-by: Denis Carikli
---
ChangeLog v8->v9:
- Remo
Signed-off-by: Denis Carikli
---
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Reordered the Cc list.
ChangeLog v3->v5:
- Updated to
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- updated pixelclk-active after the following patch:
"imx-drm: Match ipu_di_signal_cfg's clk_pol with its description.&q
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
---
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
ChangeLog v7->v8:
- Shrinked even more the C
Signed-off-by: Denis Carikli
---
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7->v8:
- Shrinked even more the Cc list.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Remove people not concerned b
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
---
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email direc
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Cc: Eric Bénard
Cc: Greg Kroah-Hartman
Cc: Shawn Guo
Cc: de...@driverdev.osuosl.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Denis Carikli
Cc: Shawn Guo
Cc: de...@driverdev.osuosl.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Denis Carikli
---
ChangeLog v7->v8:
- Changed one Cc
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch
- val is now initialized in imx_pd_connector_get_modes
Change
Cc: Alexander Shiyan
Cc: Eric Bénard
Cc: Greg Kroah-Hartman
Cc: driverdev-devel@linuxdriverproject.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Denis Carikli
---
ChangeLog v7->v8:
- Shrinked even more the Cc list.
- Rebased.
ChangeLog v6->v7:
- Shrinked even more the C
Cc: Eric Bénard
Cc: Greg Kroah-Hartman
Cc: Shawn Guo
Cc: de...@driverdev.osuosl.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Denis Carikli
---
ChangeLog v7->v8:
- Shrinked even more the Cc list.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
: Denis Carikli
---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
- Added a better explanation of the change.
ChangeLog v5:
- New patch.
---
arch/arm/boot/dts/imx51-apf51dev.dts|2 +-
arch/arm/boot/dts
Cc: Greg Kroah-Hartman
Cc: Eric Bénard
Cc: Marek Vasut
Cc: Sascha Hauer
Cc: de...@driverdev.osuosl.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Denis Carikli
---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Remove people not concerned by this
Cc: Alexander Shiyan
Cc: Eric Bénard
Cc: Greg Kroah-Hartman
Cc: Marek Vasut
Cc: Sascha Hauer
Cc: driverdev-devel@linuxdriverproject.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Denis Carikli
---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch
Cc: Sascha Hauer
Cc: de...@driverdev.osuosl.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Denis Carikli
---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch
- val is now initialized in imx_pd_connector_get_modes
ChangeLog v5->v6:
- Remove peop
On 12/05/2013 09:56 PM, Marek Vasut wrote:
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts
[...]
+&display {
+ display-supply = <®_lcd_3v3>;
+ status = "okay";
The "status = " here should probably be in the board DTS, not in the LCD DTS.
The display is optio
...@driverdev.osuosl.org
Signed-off-by: Denis Carikli
---
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
- Added a better explanation of the change.
ChangeLog v5:
- New patch.
---
arch/arm/boot/dts/imx51-apf51dev.dts|2 +-
arch/arm/boot/dts/imx53-m53evk.dts |
Cc: Alexander Shiyan
Cc: Eric Bénard
Cc: Greg Kroah-Hartman
Cc: Marek Vasut
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: Thierry Reding
Cc: driverdev-devel@linuxdriverproject.org
Signed-off-by: Denis Carikli
---
.../bindings/staging/imx-drm/fsl-imx-drm.txt |1 +
drivers/staging/imx-drm
: Greg Kroah-Hartman
Cc: Philipp Zabel
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: dri-de...@lists.freedesktop.org
Cc: driverdev-devel@linuxdriverproject.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Denis Carikli
---
ChangeLog v5->v6:
- Remove people not concerned by this patch from the
Cc: Greg Kroah-Hartman
Cc: Eric Bénard
Cc: Marek Vasut
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: de...@driverdev.osuosl.org
Signed-off-by: Denis Carikli
---
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
ChangeLog v3->v5:
- Use the correct RGB order.
Change
Cc: Shawn Guo
Cc: Sascha Hauer
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v5:
- Updated to the new GPIO defines.
ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51
boards.
- This pat
The eukrea mbimxsd51 has a gpio backlight for its
LCD display, so we turn that driver on.
Cc: Sascha Hauer
Cc: linux-arm-ker...@lists.infradead.org
Cc: Fabio Estevam
Cc: Shawn Guo
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v5:
- New patch in this serie.
---
arch/arm
: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v5:
- Code clenaup.
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- the lcd-supply is now called display-supply (not all display are LCD).
- The code and documentation was u
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Cc: Shawn Guo
Cc: Sascha Hauer
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v5:
- Updated to new GPIO defines.
- Updated to new licenses checkpatch requirements.
- one whitespace clea
@linuxdriverproject.org
Cc: Philipp Zabel
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-ker...@lists.infradead.org
Cc: David Airlie
Cc: dri-de...@lists.freedesktop.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v4:
- The old patch was named "staging: imx-drm: ip
: linux-me...@vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v5:
- New patch.
---
arch/arm/boot/dts/imx51-apf51dev.dts|2 +-
arch/arm/boot/dts/imx53-m53evk.dts |2 +-
drivers/staging
@linuxdriverproject.org
Cc: David Airlie
Cc: dri-de...@lists.freedesktop.org
Cc: Mauro Carvalho Chehab
Cc: Laurent Pinchart
Cc: linux-me...@vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
: linux-me...@vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v5:
- Use the correct RGB order.
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed the commit messag
@linuxdriverproject.org
Cc: Philipp Zabel
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-ker...@lists.infradead.org
Cc: David Airlie
Cc: dri-de...@lists.freedesktop.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v4:
- The old patch was named "staging: imx-drm: ip
: linux-me...@vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed the commit message long desciption that was just a copy of the sh
@linuxdriverproject.org
Cc: David Airlie
Cc: dri-de...@lists.freedesktop.org
Cc: Mauro Carvalho Chehab
Cc: Laurent Pinchart
Cc: linux-me...@vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- the lcd-supply is now called display-supply (not all display are LCD).
- The code and documentation was updated accordin
Bénard
Signed-off-by: Denis Carikli
---
drivers/staging/imx-drm/ipuv3-crtc.c |6 --
1 file changed, 4 insertions(+), 2 deletions(-)
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Ajusted the flags to match the changes in "drm: Add the lacking
DRM_MODE_FLAG_* for
: linux-me...@vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed the commit message long desciption that was just a copy of the sh
: Ville Syrjala
Cc: dri-de...@lists.freedesktop.org
Cc: Fabio Estevam
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed a duplicated Cc.
- Chan
1 - 100 of 108 matches
Mail list logo
