This patch adds a channel type check at the beginning of the
ad2s90_read_raw function. Since ad2s90 has only one channel, it just
checks if the given channel is the expected one and if not, return
-EINVAL.
Signed-off-by: Matheus Tavares
---
drivers/staging/iio/resolver/ad2s90.c | 3 +++
1 file c
This patch adds the IIO_CHAN_INFO_SCALE mask to ad2s90_chan and
implements the relative read behavior at ad2s90_read_raw.
Signed-off-by: Victor Colombo
Signed-off-by: Matheus Tavares
---
drivers/staging/iio/resolver/ad2s90.c | 32 ++-
1 file changed, 22 insertions(+), 10
Previously, when spi_read returned an error code inside ad2s90_read_raw,
the code was ignored and IIO_VAL_INT was returned. This patch makes the
function return the error code returned by spi_read when it fails.
Signed-off-by: Matheus Tavares
---
drivers/staging/iio/resolver/ad2s90.c | 9 ++-
Previously, devm_iio_device_register was being called before the
spi_setup call and the spi_device's max_speed_hz and mode assignments.
This could lead to a race condition since the driver was still being
set up after it was already made ready to use. To fix it, this patch
moves the device registra
This patch removes an initial assignment to the variable ret at probe,
that was always overwritten.
Signed-off-by: Matheus Tavares
---
drivers/staging/iio/resolver/ad2s90.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/iio/resolver/ad2s90.c
b/drivers/stagin
Previously, ad2s90_probe ignored the return code from spi_setup, not
handling its possible failure. This patch makes ad2s90_probe check if
the code is an error code and, if so, do the following:
- Call dev_err with an appropriate error message.
- Return the spi_setup's error code, aborting the exe
This patch set adds scale info to ad2s90's single channel, improve
error handling in it's functions and fix a possible race condition
issue.
The goal with this patch set is to address the points discussed in the
mailing list in an effort to move ad2s90.c out of staging.
Changes in v2:
- Added my
On 10/26/18 2:36 AM, Dan Carpenter wrote:
> On Thu, Oct 25, 2018 at 09:11:00PM +, adham.aboza...@microchip.com wrote:
>
> You'll need to resend these because your email from header is in the
> wrong format. Also there is a typo in the subject. s/stagign/staging/.
>
Apologies Dan for that! Wil
[Adding Joe Perches]
On Fri, 26 Oct 2018, Sasha Levin wrote:
> On Fri, Oct 26, 2018 at 04:04:45PM -0300, Shayenne da Luz Moura wrote:
> > This change was suggested by checkpath.pl. Use unsigned int with bitfield
> > allocate only one bit to the boolean variable.
> >
> > CHECK: Avoid using bool st
On Fri, Oct 26, 2018 at 04:04:45PM -0300, Shayenne da Luz Moura wrote:
This change was suggested by checkpath.pl. Use unsigned int with bitfield
allocate only one bit to the boolean variable.
CHECK: Avoid using bool structure members because of possible alignment
issues
Signed-off-by: Shayenne
This change was suggested by checkpath.pl. Use unsigned int with bitfield
allocate only one bit to the boolean variable.
CHECK: Avoid using bool structure members because of possible alignment
issues
Signed-off-by: Shayenne da Luz Moura
---
drivers/staging/vboxvideo/vbox_drv.h| 14 +
This change was suggested by checkpath.pl.
CHECK: Prefer kernel type 'u32' over 'uint32_t'
Signed-off-by: Shayenne da Luz Moura
---
drivers/staging/vboxvideo/vbox_mode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/vboxvideo/vbox_mode.c
b/drivers/staging/
This series cleans the following checkpatch.pl issues:
CHECK: Prefer kernel type 'u32' over 'uint32_t'
CHECK: Avoid using bool structure members because of possible alignment issues
Shayenne da Luz Moura (2):
staging: vboxvideo: Change uint32_t to u32
staging: vboxvideo: Use unsigned int inst
On Fri, Oct 26, 2018 at 7:04 AM Dan Carpenter wrote:
>
> On Thu, Oct 25, 2018 at 09:45:11PM -0300, Matheus Tavares wrote:
> > From: Victor Colombo
> >
> > This patch adds the IIO_CHAN_INFO_SCALE mask to ad2s90_chan and
> > implements the relative read behavior at ad2s90_read_raw.
> >
> > Signed-o
On Thu, 18 Oct 2018 at 10:38, Stefan Wahren wrote:
>
> Am 18.10.2018 um 11:22 schrieb Dave Stevenson:
> > On Wed, 17 Oct 2018 at 17:51, Peter Robinson wrote:
> >> Drop various pieces of dead code from here and there to get rid of
> >> the remaining users of VCHI_CONNECTION_T. After that w
On Fri, Oct 26, 2018 at 2:20 AM chouryzhou(周威) wrote:
>
> Hi
> We are working for running android in container, but we found that binder is
> not isolated by ipc namespace. Since binder is a form of IPC and therefore
> should
> be tied to ipc namespace. With this patch, we can run more than one
This commit adds pci device tree bindings for the Mt7621 pci controller.
This is a temporal file included in staging driver directory and will be
moved to its correct location when this driver gets out of staging.
Cc: Rob Herring
Signed-off-by: Sergio Paracuellos
---
I resend this because I don'
Add device tree table for matching vendor ID
and support for retrieving platform data
from device tree.
Signed-off-by: Nishad Kamdar
---
drivers/staging/iio/resolver/ad2s1210.c | 43 -
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/iio/resol
Use the gpiod interface instead of the deprecated old non-descriptor
Changes in v5:
- Add device tree support.
- Add device tree table for matching vendor ID.
- Add Support for retrieving platform data from device tree.
Changes in v4:
- Add spaces after { and before } in gpios[]
initializat
Some operations performed in the probe function should have been
implemented in the init function. Namely class and dev region creations.
Signed-off-by: Nicolas Saenz Julienne
---
.../interface/vchiq_arm/vchiq_arm.c | 71 ---
1 file changed, 45 insertions(+), 26 deletio
We update sync to reflect that the firmware version is compatible with
that option. We don't need to check both of them again further down the
code.
Signed-off-by: Nicolas Saenz Julienne
---
.../staging/vc04_services/interface/vchiq_arm/vchiq_core.c| 4 +---
1 file changed, 1 insertion(+), 3
It is preferred in the kernel to avoid using semaphores to wait for
events as, they are optimised for the opposite situation; where the
common case is that they are available and may block only occasionally.
FYI see this thread: https://lkml.org/lkml/2008/4/11/323.
Also completions are semanticall
Both functions checked the minor number of the cdev prior running the
code. This was useless since the number of devices is already limited by
alloc_chrdev_region.
This removes the check and reindents the code where relevant.
Signed-off-by: Nicolas Saenz Julienne
---
.../interface/vchiq_arm/vch
The more the better.
Signed-off-by: Nicolas Saenz Julienne
---
.../staging/vc04_services/interface/vchi/TODO | 46 ++-
1 file changed, 44 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/TODO
b/drivers/staging/vc04_services/interface/vchi/
It is preferred in the kernel to avoid using semaphores to wait for
events, as they are optimised for the opposite situation; where the
common case is that they are available and may block only occasionally.
FYI see this thread: https://lkml.org/lkml/2008/4/11/323.
Also completions are semanticall
VCHIQ bulk transfers are what most people call DMA transfers. The CPU
sends a list of physical addresses to the VideoCore which then access
the memory directly without the need for CPU interaction. With this
setup we call the CPU the "slave" and the VideoCore the "master".
There seems to be an op
The function is passed to vchiq_core.c for it to go trough all the
transfer elements (an array of pointers to data) and copy them into the
actual transfer memory (contiguous memory).
The logic in the function was "copy an element and return, except when
the element is empty, in which case look for
vchiq_init_state() checks the initial contents of slot_zero are correct.
These are set in vchiq_init_slots(), using the same hard-coded defaults
as the checks. Both functions are called sequentially and Video Core
isn't yet aware of the slot's address. There is no way the contents of
slot_zero chan
The function is overly complicated for what it's ultimately achieving.
It's simply filling up a structure.
Signed-off-by: Nicolas Saenz Julienne
---
.../interface/vchiq_arm/vchiq_arm.c | 12
.../interface/vchiq_arm/vchiq_core.c | 30 +--
.../interface/
It's the first thing remote_event_signal() does.
Signed-off-by: Nicolas Saenz Julienne
---
.../staging/vc04_services/interface/vchiq_arm/vchiq_core.c| 4
1 file changed, 4 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
b/drivers/staging/vc04_s
Hi All,
This series was written in parallel with reading and understanding the
vchiq code. So excuse me for the lack of logic in the sequence of
patches.
It's an RFC for various reasons, first I think it's going to clash with
the last Stefan's series. Also I'm not used to doing big series.
The m
The resulting code is way more readeable and intuitive compared to plain
list_for_each.
Signed-off-by: Nicolas Saenz Julienne
---
.../interface/vchiq_arm/vchiq_arm.c | 52 ++-
1 file changed, 16 insertions(+), 36 deletions(-)
diff --git a/drivers/staging/vc04_services/
No one is using the API neither in the actual staging tree nor in the
downstream tree (https://github.com/raspberrypi/linux).
Signed-off-by: Nicolas Saenz Julienne
---
.../vc04_services/interface/vchi/vchi.h | 5 ---
.../interface/vchiq_arm/vchiq_shim.c | 32 ---
The implementation of both IOCTLS was the same except for one function
call. This joins both implementations and updates the code to avoid
unneeded indentations.
Signed-off-by: Nicolas Saenz Julienne
---
.../interface/vchiq_arm/vchiq_arm.c | 66 +++
1 file changed, 24 i
All the memory operations featured in this file modify/access memory
that is only accessed by the CPU. So we can assume that all the memory
barrier handling done by the completion routines is good enough for us.
Signed-off-by: Nicolas Saenz Julienne
---
.../interface/vchiq_arm/vchiq_util.c
vchiq_init_state() initialises a series of semaphores to then call
remote_event_create() on the same semaphores, which initializes them
again.
Signed-off-by: Nicolas Saenz Julienne
---
.../staging/vc04_services/interface/vchiq_arm/vchiq_core.c | 5 -
1 file changed, 5 deletions(-)
diff --
The concept of VCHI_MEM_HANDLE_T is introduced by this header file and
was meant to be used with bulk transfers. After a quick look in
vchiq_core.c it is pretty clear that it actually accomplishes nothing
nor alters the bulk transfers in any way.
Signed-off-by: Nicolas Saenz Julienne
---
.../vc0
It is preferred in the kernel to avoid using semaphores to wait for
events, as they are optimised for the opposite situation; where the
common case is that they are available and may block only occasionally.
FYI see this thread: https://lkml.org/lkml/2008/4/11/323.
Also completions are semanticall
Use the gpiod interface instead of the deprecated old non-descriptor
interface.
Signed-off-by: Nishad Kamdar
---
Changes in v4:
- Add spaces after { and before } in gpios[]
initialization.
- Check the correct pointer for error.
- Align the dev_err msg to existing format in the code.
Changes
Hi,
On 23-10-18 19:43, Shayenne da Luz Moura wrote:
Remove unneeded parentheses around the arguments of ||. This reduces
clutter and code behave in the same way.
Change suggested by checkpatch.pl.
vbox_main.c:119: CHECK: Unnecessary parentheses around 'rects[i].x2 <
crtc->x'
Signed-off-by: Sha
Hi Stefan,
On Thu, 2018-10-25 at 17:29 +0200, Stefan Wahren wrote:
> This patch series improves the load/unload of bcm2835 camera and
> audio
> drivers. It has been tested with Raspberry Pi 3 B and a camera module
> V1.
>
> This series based on current linux-next and Phil Elwell's series
> ("Impr
On Thu, 2018-10-25 at 17:29 +0200, Stefan Wahren wrote:
> As per default the GPU memory config of the Raspberry Pi isn't
> sufficient
> for the camera usage. Even worse the bcm2835 camera driver doesn't
> provide a
> helpful error message in this case. So let's add a hint to point the
> user
> to t
Hi,
On 25-10-18 21:40, Shayenne da Luz Moura wrote:
This series cleans the following checkpatch.pl issues:
CHECK: Prefer kernel type 'u32' over 'uint32_t'
CHECK: Avoid using bool structure members because of possible alignment issues
Shayenne da Luz Moura (2):
staging: vboxvideo: Change uin
On Thu, Oct 25, 2018 at 09:45:11PM -0300, Matheus Tavares wrote:
> From: Victor Colombo
>
> This patch adds the IIO_CHAN_INFO_SCALE mask to ad2s90_chan and
> implements the relative read behavior at ad2s90_read_raw.
>
> Signed-off-by: Victor Colombo
> ---
You should be adding your S-o-B here a
On Thu, Oct 25, 2018 at 09:11:00PM +, adham.aboza...@microchip.com wrote:
You'll need to resend these because your email from header is in the
wrong format. Also there is a typo in the subject. s/stagign/staging/.
regards,
dan carpenter
___
devel
Hi
We are working for running android in container, but we found that binder is
not isolated by ipc namespace. Since binder is a form of IPC and therefore
should
be tied to ipc namespace. With this patch, we can run more than one android
container on one host.
This patch move "binder_procs" an
On Fri, Oct 26, 2018 at 11:09:31AM +0300, Dan Carpenter wrote:
> On Thu, Oct 25, 2018 at 05:29:30PM +0200, Stefan Wahren wrote:
> > Following Eric's commit 37b7b3087a2f ("staging/vc04_services: Register a
> > platform device for the camera driver.") this register the audio driver as
> > a platform
On Thu, Oct 25, 2018 at 05:29:30PM +0200, Stefan Wahren wrote:
> Following Eric's commit 37b7b3087a2f ("staging/vc04_services: Register a
> platform device for the camera driver.") this register the audio driver as
> a platform device, too.
>
> Signed-off-by: Stefan Wahren
> ---
> drivers/stagin
On Thu, Oct 25, 2018 at 05:29:28PM +0200, Stefan Wahren wrote:
> In error case platform_device_register_data would return an ERR_PTR
> instead of NULL. So we better check this before unregistration.
>
> Fixes: 37b7b3087a2f ("staging/vc04_services: Register a platform device for
> the camera drive
49 matches
Mail list logo
