On Wed, May 09, 2018 at 07:19:24PM +, Sunil Muthuswamy wrote:
> In the VM mode on Hyper-V, currently, when the kernel panics, an error
> code and few register values are populated in an MSR and the Hypervisor
> notified. This information is collected on the host. The amount of
>
Under upstream staging commit 5a2ca43fa54f561c252c2, the list handling
code in kiblnd_handle_early_rxs() got changed to list_for_each_safe().
That protects against the current thread from deleting the current entry
it is looking at. It does not protect against another thread from deleting
the next
On 09.05.2018 22:17, Ajay Singh wrote:
> On Wed, 9 May 2018 16:42:59 +0300
> Claudiu Beznea wrote:
>
>> On 07.05.2018 11:43, Ajay Singh wrote:
>>> Use kmemdup instead of kmalloc & memcpy in add_network_to_shadow().
>>>
>>> Signed-off-by: Ajay Singh
>>> ---
>>> drivers/staging/wilc1000/wilc_wf
On 09.05.2018 21:42, Ajay Singh wrote:
> On Wed, 9 May 2018 16:43:14 +0300
> Claudiu Beznea wrote:
>
>> On 07.05.2018 11:43, Ajay Singh wrote:
>>> Fix line over 80 characters issue reported by checkpatch in
>>> add_network_to_shadow() by using temporary variable.
>>
>> I, personally, don't li
On 09.05.2018 21:36, Ajay Singh wrote:
> On Wed, 9 May 2018 16:44:47 +0300
> Claudiu Beznea wrote:
>
>> On 07.05.2018 11:43, Ajay Singh wrote:
>>> Fix checkpatch reported issue of line over 80 char in handle_key().
>>> Introduced new functions by spliting existing function to address
>>> the ch
We had the camera driver set up in a module_init function, but that
meant that the camera driver would fail to load if it was initialized
before VCHI. This enforces that it loads after we've successfully set
up.
Signed-off-by: Eric Anholt
---
I'm going to try to get Dave Stevenson's new v4l2 co
This allows bcm2835-camera to automatically probe after VCHI has
loaded, rather than only successfully probing if the arbitrary probe
order chooses us after VCHI.
Signed-off-by: Eric Anholt
---
.../staging/vc04_services/bcm2835-camera/TODO | 11 ---
.../bcm2835-camera/bcm2835-camera.c
--
Hello
Greetings to you please i have a business proposal for you contact me
for more detailes asap thanks.
Best Regards,
Miss.Zeliha ömer faruk
Esentepe Mahallesi Büyükdere
Caddesi Kristal Kule Binasi
No:215
Sisli - Istanbul, Turkey
___
devel mail
On Wed, 9 May 2018, Mauro Carvalho Chehab wrote:
> The script:
> ./scripts/documentation-file-ref-check --fix-rst
>
> Gives multiple hints for broken references on some files.
> Manually use the one that applies for some files.
>
> Signed-off-by: Mauro Carvalho Chehab
Acked-by: James Mo
Rx handler (assigned with netdev_rx_handler_register,
called from __netif_receive_skb()) uses value of dev->rx_handler_data.
The driver has no rx handler and does not need it, so remove rx_handler_data
read.
Signed-off-by: Ivan Safonov
---
drivers/staging/rtl8188eu/TODO| 5 -
On Wed, 9 May 2018 16:42:59 +0300
Claudiu Beznea wrote:
> On 07.05.2018 11:43, Ajay Singh wrote:
> > Use kmemdup instead of kmalloc & memcpy in add_network_to_shadow().
> >
> > Signed-off-by: Ajay Singh
> > ---
> > drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 4 ++--
> > 1 file changed,
In the VM mode on Hyper-V, currently, when the kernel panics, an error
code and few register values are populated in an MSR and the Hypervisor
notified. This information is collected on the host. The amount of
information currently collected is found to be limited and not very
a
On Wed, 9 May 2018 16:44:38 +0300
Claudiu Beznea wrote:
> On 07.05.2018 11:43, Ajay Singh wrote:
> > Fix line over 80 characters issue reported by checkpatch.pl in
> > host_int_parse_assoc_resp_info().
> >
> > Signed-off-by: Ajay Singh
> > ---
> > drivers/staging/wilc1000/host_interface.c | 37
On Wed, 9 May 2018 16:42:20 +0300
Claudiu Beznea wrote:
> On 07.05.2018 11:43, Ajay Singh wrote:
> > Cleanup patch to have variable names as per linux coding style.
> >
> > Signed-off-by: Ajay Singh
> > ---
> > drivers/staging/wilc1000/host_interface.c | 6 +++---
> > 1 file changed, 3 inserti
On Wed, 9 May 2018 16:42:45 +0300
Claudiu Beznea wrote:
> On 07.05.2018 11:43, Ajay Singh wrote:
> > Fix line over 80 characters issues reported by checkpatch.pl script
> > in wilc_wfi_cfg_tx_vendor_spec() by using temporary variable.
> > Simplified 'if else' condition with 'if'.
> >
> > Signed-
On Wed, 9 May 2018 16:43:14 +0300
Claudiu Beznea wrote:
> On 07.05.2018 11:43, Ajay Singh wrote:
> > Fix line over 80 characters issue reported by checkpatch in
> > add_network_to_shadow() by using temporary variable.
>
> I, personally, don't like this way of fixing line over 80. From my
> poi
On Wed, 9 May 2018 16:43:37 +0300
Claudiu Beznea wrote:
> On 07.05.2018 11:43, Ajay Singh wrote:
> > Fix line over 80 characters issue in
> > host_int_parse_assoc_resp_info() by using shorter name for the
> > local variable.
> >
> > Signed-off-by: Ajay Singh
> > ---
> > drivers/staging/wilc100
On Wed, 9 May 2018 16:43:59 +0300
Claudiu Beznea wrote:
> On 07.05.2018 11:43, Ajay Singh wrote:
> > Split host_int_parse_join_bss_param() to avoid the line over 80
> > character issue reported by checkpatch.pl script.
> >
> > Signed-off-by: Ajay Singh
> > ---
> > drivers/staging/wilc1000/host
On Wed, 9 May 2018 16:44:47 +0300
Claudiu Beznea wrote:
> On 07.05.2018 11:43, Ajay Singh wrote:
> > Fix checkpatch reported issue of line over 80 char in handle_key().
> > Introduced new functions by spliting existing function to address
> > the checkpatch issue.
> >
> > Signed-off-by: Ajay Sin
On Wed, 9 May 2018 16:44:13 +0300
Claudiu Beznea wrote:
> On 07.05.2018 11:43, Ajay Singh wrote:
> > Fix line over 80 char issue in host_int_handle_disconnect() by using
> > temp variable to hold the 'wilc_connect_result' function pointer.
> >
> > Signed-off-by: Ajay Singh
> > ---
> > drivers/
> -Original Message-
> From: k...@linuxonhyperv.com
> Sent: Thursday, May 3, 2018 11:08 PM
> To: x...@kernel.org; gre...@linuxfoundation.org; linux-ker...@vger.kernel.org;
> de...@linuxdriverproject.org; o...@aepfle.de; a...@canonical.com;
> jasow...@redhat.com;
> t...@linutronix.de; h...
> -Original Message-
> From: k...@linuxonhyperv.com
> Sent: Thursday, May 3, 2018 11:08 PM
> To: x...@kernel.org; gre...@linuxfoundation.org; linux-ker...@vger.kernel.org;
> de...@linuxdriverproject.org; o...@aepfle.de; a...@canonical.com;
> jasow...@redhat.com;
> t...@linutronix.de; h...
> -Original Message-
> From: k...@linuxonhyperv.com
> Sent: Thursday, May 3, 2018 11:08 PM
> To: x...@kernel.org; gre...@linuxfoundation.org; linux-ker...@vger.kernel.org;
> de...@linuxdriverproject.org; o...@aepfle.de; a...@canonical.com;
> jasow...@redhat.com;
> t...@linutronix.de; h...
> -Original Message-
> From: k...@linuxonhyperv.com
> Sent: Thursday, May 3, 2018 11:08 PM
> To: x...@kernel.org; gre...@linuxfoundation.org; linux-ker...@vger.kernel.org;
> de...@linuxdriverproject.org; o...@aepfle.de; a...@canonical.com;
> jasow...@redhat.com;
> t...@linutronix.de; h...
> -Original Message-
> From: k...@linuxonhyperv.com
> Sent: Thursday, May 3, 2018 11:08 PM
> To: x...@kernel.org; gre...@linuxfoundation.org; linux-ker...@vger.kernel.org;
> de...@linuxdriverproject.org; o...@aepfle.de; a...@canonical.com;
> jasow...@redhat.com;
> t...@linutronix.de; h...
On Sun, May 06, 2018 at 06:45:31PM +0100, Al Viro wrote:
> On Sun, May 06, 2018 at 08:19:49PM +0300, Alexey Dobriyan wrote:
> > @@ -62,9 +62,9 @@ struct proc_dir_entry {
> > umode_t mode;
> > u8 namelen;
> > #ifdef CONFIG_64BIT
> > -#define SIZEOF_PDE_INLINE_NAME (192-139)
> > +#defin
On Wed, May 09, 2018 at 05:18:47PM +0200, Christian Gromm wrote:
> On 09.05.2018 16:54, Dan Carpenter wrote:
> > On Wed, May 09, 2018 at 04:09:21PM +0200, Christian Gromm wrote:
> > > On 09.05.2018 15:19, Dan Carpenter wrote:
> > > > On Tue, May 08, 2018 at 11:44:49AM +0200, Christian Gromm wrote:
On 09.05.2018 16:54, Dan Carpenter wrote:
On Wed, May 09, 2018 at 04:09:21PM +0200, Christian Gromm wrote:
On 09.05.2018 15:19, Dan Carpenter wrote:
On Tue, May 08, 2018 at 11:44:49AM +0200, Christian Gromm wrote:
This prohibits the allocation of the memory for the MBOs if only the
part of the
On Wed, 9 May 2018 10:17:34 +0200
Mohammed Gamal wrote:
> On older windows hosts the net_device instance is returned to
> the caller of rndis_filter_device_add() without having the presence
> bit set first. This would cause any subsequent calls to network device
> operations (e.g. MTU change, ch
On Wed, May 09, 2018 at 04:09:21PM +0200, Christian Gromm wrote:
> On 09.05.2018 15:19, Dan Carpenter wrote:
> > On Tue, May 08, 2018 at 11:44:49AM +0200, Christian Gromm wrote:
> > > This prohibits the allocation of the memory for the MBOs if only the
> > > part of the MBOs, requested by the appli
On 09.05.2018 15:46, Dan Carpenter wrote:
On Tue, May 08, 2018 at 11:44:57AM +0200, Christian Gromm wrote:
This patch prevents the driver from falling back to polling mode
in case of IRQ misconfiguration.
Signed-off-by: Christian Gromm
---
drivers/staging/most/i2c/i2c.c | 18 ++--
On 09.05.2018 15:19, Dan Carpenter wrote:
On Tue, May 08, 2018 at 11:44:49AM +0200, Christian Gromm wrote:
This prohibits the allocation of the memory for the MBOs if only the
part of the MBOs, requested by the application, may be allocated. The
function arm_mbo_chain, if cannot allocate all re
On Tue, May 08, 2018 at 11:44:57AM +0200, Christian Gromm wrote:
> This patch prevents the driver from falling back to polling mode
> in case of IRQ misconfiguration.
>
> Signed-off-by: Christian Gromm
> ---
> drivers/staging/most/i2c/i2c.c | 18 ++
> 1 file changed, 10 insertion
On 07.05.2018 11:43, Ajay Singh wrote:
> Fix line over 80 characters issue reported by checkpatch.pl in
> host_int_parse_assoc_resp_info().
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/host_interface.c | 37
> ++-
> 1 file changed, 21 insertions(+
On 07.05.2018 11:43, Ajay Singh wrote:
> Fix checkpatch reported issue of line over 80 char in handle_key().
> Introduced new functions by spliting existing function to address the
> checkpatch issue.
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/host_interface.c | 59
> +
On 07.05.2018 11:43, Ajay Singh wrote:
> Fix line over 80 char issue in host_int_handle_disconnect() by using
> temp variable to hold the 'wilc_connect_result' function pointer.
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/host_interface.c | 8
> 1 file changed, 4 in
On 07.05.2018 11:43, Ajay Singh wrote:
> Rename clear_duringIP() function to avoid camelCase issue reported by
> checkpatch.pl script.
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff -
On 07.05.2018 11:43, Ajay Singh wrote:
> Split host_int_parse_join_bss_param() to avoid the line over 80
> character issue reported by checkpatch.pl script.
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/host_interface.c | 247
> --
> 1 file changed
On 07.05.2018 11:43, Ajay Singh wrote:
> Fix line over 80 characters issue in host_int_parse_assoc_resp_info() by
> using shorter name for the local variable.
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/host_interface.c | 9 +
> 1 file changed, 5 insertions(+), 4 del
On 07.05.2018 11:43, Ajay Singh wrote:
> Use kmemdup instead of kmalloc & memcpy in add_network_to_shadow().
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/wil
On 07.05.2018 11:43, Ajay Singh wrote:
> Fix line over 80 characters issues reported by checkpatch.pl script in
> wilc_wfi_cfg_tx_vendor_spec() by using temporary variable. Simplified
> 'if else' condition with 'if'.
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/wilc_wfi_cfgop
On 07.05.2018 11:43, Ajay Singh wrote:
> Fix line over 80 characters issue reported by checkpatch in
> add_network_to_shadow() by using temporary variable.
I, personally, don't like this way of fixing line over 80. From my
point of view this introduces a new future patch. Maybe, in future,
someb
On 07.05.2018 11:43, Ajay Singh wrote:
> Added comments for mutex and spinlock_t to avoid checkpatch.pl script.
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/host_interface.h | 2 +-
> drivers/staging/wilc1000/wilc_wfi_netdevice.h | 5 +++--
> 2 files changed, 4 insertions
On 07.05.2018 11:43, Ajay Singh wrote:
> Cleanup patch to have variable names as per linux coding style.
>
> Signed-off-by: Ajay Singh
> ---
> drivers/staging/wilc1000/host_interface.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/wilc1000/host
The script:
./scripts/documentation-file-ref-check --fix-rst
Gives multiple hints for broken references on some files.
Manually use the one that applies for some files.
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/ABI/obsolete/sysfs-gpio | 2 +-
.../devicet
On Tue, May 08, 2018 at 11:44:49AM +0200, Christian Gromm wrote:
> This prohibits the allocation of the memory for the MBOs if only the
> part of the MBOs, requested by the application, may be allocated. The
> function arm_mbo_chain, if cannot allocate all requested MBO, frees all
> prior allocate
Quoted strings should not be split to help text grep in the source.
Signed-off-by: Kamal Heib
---
drivers/staging/mt7621-eth/mtk_eth_soc.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/mt7621-eth/mtk_eth_soc.c
b/drivers/staging/mt7621-eth/mtk_eth_so
This change fixes all the lines that get over 80 characters.
Signed-off-by: Kamal Heib
---
drivers/staging/mt7621-eth/ethtool.c| 3 ++-
drivers/staging/mt7621-eth/gsw_mt7621.c | 3 ++-
drivers/staging/mt7621-eth/mdio.c | 3 ++-
drivers/staging/mt7621-eth/soc_mt7621.c | 6 --
4 file
This patch set fixes multiple issues reported by checkpatch within the
mt7621-eth driver.
Changes from v1:
- [2] move the mdiobus_get_phy() to new line to make the code more clean.
- [3] make sure that string is on a line by itself.
Kamal Heib (3):
staging: mt7621-eth: Prefer unsigned int to ba
This commit replaces all the unsigned definitions in favour of 'unsigned
int' which is preferred.
Signed-off-by: Kamal Heib
---
drivers/staging/mt7621-eth/gsw_mt7620.h | 4 ++--
drivers/staging/mt7621-eth/gsw_mt7621.c | 4 ++--
drivers/staging/mt7621-eth/mtk_eth_soc.c | 4 ++--
drivers/staging
Hi Philipp,
Thanks.
On Wed 09 May 2018 at 08:53, Philipp Zabel wrote:
On Mon, 2018-05-07 at 17:21 +0100, Rui Miguel Silva wrote:
This patch adds the device tree nodes for csi, video
multiplexer and mipi-csi
besides the graph connecting the necessary endpoints to make
the media capture
entitie
Hi Randy,
On Tue 08 May 2018 at 17:24, Randy Dunlap wrote:
Hi,
I have a few editing suggestions below...
Thank you very much for this. I will incorporate this in the next
version.
---
Cheers,
Rui
On 05/07/2018 09:21 AM, Rui Miguel Silva wrote:
Add rst document to describe the i.M
Hi Philipp,
Thanks for the review.
On Tue 08 May 2018 at 14:30, Philipp Zabel wrote:
On Mon, 2018-05-07 at 17:21 +0100, Rui Miguel Silva wrote:
Add bindings documentation for i.MX7 media drivers.
Signed-off-by: Rui Miguel Silva
---
.../devicetree/bindings/media/imx7.txt| 152
++
Hi Fabio,
On Tue 08 May 2018 at 13:28, Fabio Estevam wrote:
Hi Rui,
On Mon, May 7, 2018 at 1:21 PM, Rui Miguel Silva
wrote:
+ reg_peri_3p15v: regulator-peri-3p15v {
+ compatible = "regulator-fixed";
+ regulator-name = "peri_3p15v_reg";
+ regul
tree: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
staging-next
head: 26a5e9b834a647b9d4dfbeef8b42f201cb3293ae
commit: 85b6542bbade42935386661cb45d90c4e13766b7 [575/620] staging: lustre:
llite: remove redundant lookup in dump_pgcache
smatch warnings:
drivers/staging/lus
On Mon, 2018-05-07 at 17:21 +0100, Rui Miguel Silva wrote:
> The IOMUXC General Purpose Register has bitfield to control video bus
> multiplexer to control the CSI input between the MIPI-CSI2 and parallel
> interface. Add that register and mask.
>
> Signed-off-by: Rui Miguel Silva
> ---
> arch/a
On Mon, 2018-05-07 at 17:21 +0100, Rui Miguel Silva wrote:
> This patch adds the device tree nodes for csi, video multiplexer and mipi-csi
> besides the graph connecting the necessary endpoints to make the media capture
> entities to work in imx7 Warp board.
>
> Also add the pin control related wi
On older windows hosts the net_device instance is returned to
the caller of rndis_filter_device_add() without having the presence
bit set first. This would cause any subsequent calls to network device
operations (e.g. MTU change, channel change) to fail after the device
is detached once, returning
[+ashmem maintainers]
On Sun, Apr 29, 2018 at 10:00:03AM -0700, syzbot wrote:
> Hello,
>
> syzbot hit the following crash on upstream commit
> cdface5209349930ae1b51338763c8e029971b97 (Sun Apr 29 03:07:21 2018 +)
> Merge tag 'for_linus_stable' of
> git://git.kernel.org/pub/scm/linux/kernel/gi
59 matches
Mail list logo
