NOTIS RASMI HADIAH TELEKOM MALAYSIA

Telekom Malaysia Berhad G.03B, Ground Floor, Kompleks Antarabangsa, Jln Sultan Ismail, Off Jalan Ampang 50250 Kuala Lumpur Malaysia. NOTIS RASMI HADIAH TELEKOM MALAYSIA Pihak Telekom Malaysia @Program Kemenangan yang telah diadakan pada 15th Januari 2015 di mana alamat email anda yang diser

[PATCH 1/2] mfd: rtsx_usb: Fix runtime PM deadlock

sd_set_power_mode() in derived module drivers/mmc/host/rtsx_usb_sdmmc.c acquires dev_mutex and then calls pm_runtime_get_sync() to make sure the device is awake while initializing a newly inserted card. Once it is called during suspending state and explicitly before rtsx_usb_suspend() acquires the

[PATCH 0/2] Fix PM deadlock and card detection problem

The patchset fixes a deadlock situation of runtime PM methods and minimize card detection "deadtime" during runtime suspending. Roger Tseng (2): mfd: rtsx_usb: Fix runtime PM deadlock mfd: rtsx_usb: Defer autosuspend while card exists drivers/mfd/rtsx_usb.c | 21 + 1 file

[PATCH 2/2] mfd: rtsx_usb: Defer autosuspend while card exists

A card insertion happens after the lastest polling before reader is suspended may never have a chance to be detected. Under current 1-HZ polling interval setting in mmc_core, the worst case of such undetectablility is about 1 second. To further reduce the undetectability, detect card slot again in

[PATCH] staging: davinci_vpfe: fix space prohibited before semicolon warning

This patch fixes the following checkpatch.pl warning: space prohibited before semicolon Signed-off-by: Aya Mahfouz --- v1: This patch applies to Greg's tree. drivers/staging/media/davinci_vpfe/dm365_ipipe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging

Re: [PATCH v8 2/4] fpga manager: add sysfs interface document

Hi Jason, > On Jan 14, 2015, at 20:12 , Jason Gunthorpe > wrote: > > On Wed, Jan 14, 2015 at 04:06:17PM +, One Thousand Gnomes wrote: > >> and I think you effectively have the user usage covered here for such >> things. It much like GPIO pins - we can describe them but we can also >> decla

Re: [PATCH v2] staging: skein: Remove all do{} while (0) loop from single statement.

Shirish, Please don't toppost, I've corrected it below. On Mon, Jan 12, 2015 at 11:14:57AM -0800, shirish gajera wrote: > On Mon, Jan 12, 2015 at 6:15 AM, Jason Cooper wrote: > > On Sun, Jan 11, 2015 at 03:41:05PM -0800, Shirish Gajera wrote: > > > This patch fixes the checkpatch.pl warning: > >

Re: [PATCH v8 2/4] fpga manager: add sysfs interface document

On Wed, Jan 14, 2015 at 04:06:17PM +, One Thousand Gnomes wrote: > and I think you effectively have the user usage covered here for such > things. It much like GPIO pins - we can describe them but we can also > declare they are not visible to the user. A missing element in mainline is a kind

[PATCH 02/15] staging: comedi: pcl818: remove depends on ISA_DMA_API limitation

Use the new comedi_isadma module to provide the ISA DMA support. This removes all the ISA_DMA_API code from this driver and allows the driver to be used on platforms that don't support the ISA_DMA_API. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman --- drivers/staging/c

[PATCH 05/15] staging: comedi: das16: remove depends on ISA_DMA_API limitation

Use the new comedi_isadma module to provide the ISA DMA support. This removes all the ISA_DMA_API code from this driver and allows the driver to be used on platforms that don't support the ISA_DMA_API. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman --- drivers/staging/c

[PATCH 04/15] staging: comedi: pcl812: remove depends on ISA_DMA_API limitation

Use the new comedi_isadma module to provide the ISA DMA support. This removes all the ISA_DMA_API code from this driver and allows the driver to be used on platforms that don't support the ISA_DMA_API. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman --- drivers/staging/c

[PATCH 10/15] staging: comedi: pcl818: simplify the dma->size calculations

Currently this driver determines the number of DMA "runs" needed and the size of the "last" DMA transfer in order to perform a command. As long as there are more "runs" required, the dma->size is set to the buffer maxsize. On the last "run" the buffer is set to the "last" size. Refactor the driver

[PATCH 09/15] staging: comedi: ni_labpc_isadma: use comedi_isdma module

The labpc driver has already had the depends on ISA_DMA_API limitation removed by moving all the DMA support code into the labpc_isadma module. For aesthetics, use the comedi_isadma module to provide the actual ISA DMA support. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hart

[PATCH 14/15] staging: comedi: pcl812: simplify the dma->size calculations

The dma->size calculations are overly complicated in this driver and the 'prealloc_bufsz' sanity checks are unnecessary. Currently this driver determines the number of DMA "runs" needed and the size of the "last" DMA transfer in order to perform a command. As long as there are more "runs" required

[PATCH 13/15] staging: comedi: pcl816: use common function to setup dma

THe pcl816_ai_setup_dma() and pcl816_ai_setup_next_dma() functions are similar other than the buffer switch and the inclusion of the "unread_samples" in pcl818_ai_setup_next_dma() when calculating the dma size. Merge these two functions by initializing the 'dma->cur_dma' in the callers and passing

[PATCH 12/15] staging: comedi: pcl816: simplify the dma->size calculations

Currently this driver determines the number of DMA "runs" needed and the size of the "last" DMA transfer in order to perform a command. As long as there are more "runs" required, the dma->size is set to the buffer maxsize. On the last "run" the buffer is set to the "last" size. Refactor the driver

[PATCH 15/15] staging: comedi: pcl812: use common function to setup dma

The pcl812_ai_setup_dma() and pcl812_ai_setup_next_dma() functions are similar other than the buffer switch and the inclusion of the "unread_samples" in pcl818_ai_setup_next_dma() when calculating the dma size. Merge these two functions by initializing the 'dma->cur_dma' in the callers and passing

[PATCH 07/15] staging: comedi: dt282x: remove depends on ISA_DMA_API limitation

Use the new comedi_isadma module to provide the ISA DMA support. This removes all the ISA_DMA_API code from this driver and allows the driver to be used on platforms that don't support the ISA_DMA_API. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman --- drivers/staging/c

[PATCH 11/15] staging: comedi: pcl818: use common function to setup dma

THe pcl818_ai_setup_dma() and pcl818_ai_setup_next_dma() functions are similar other than the buffer switch and the inclusion of the "unread_samples" in pcl818_ai_setup_next_dma() when calculating the dma size. Merge these two functions by initializing the 'dma->cur_dma' in the callers and passing

[PATCH 00/15] staging: comedi: use common module for ISA DMA

The comedi legacy drivers that use ISA DMA all currently depend on the ISA_DMA_API being avaliable in order to be selected. The ISA_DMA_API is only needed to optionally support DMA when running asnyc commands. Introduce a new helper module that provides all the ISA DMA support. Modify the Kconfig

[PATCH 06/15] staging: comedi: das1800: remove depends on ISA_DMA_API limitation

Use the new comedi_isadma module to provide the ISA DMA support. This removes all the ISA_DMA_API code from this driver and allows the driver to be used on platforms that don't support the ISA_DMA_API. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman --- drivers/staging/c

[PATCH 08/15] staging: comedi: ni_at_a2150: remove depends on ISA_DMA_API limitation

Use the new comedi_isadma module to provide the ISA DMA support. This removes all the ISA_DMA_API code from this driver and allows the driver to be used on platforms that don't support the ISA_DMA_API. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman --- drivers/staging/c

[PATCH 01/15] staging: comedi: comedi_isadma: introduce helper module for ISA DMA

Introduce a new helper module to consolidate all the ISA DMA code. This will allow removing the "depends on ISA_DMA_API" from the legacy drivers that can use DMA for async command support. This module is complete based on the various uses of ISA DMA in the comedi drivers. Signed-off-by: H Hartley

[PATCH 03/15] staging: comedi: pcl816: remove depends on ISA_DMA_API limitation

Use the new comedi_isadma module to provide the ISA DMA support. This removes all the ISA_DMA_API code from this driver and allows the driver to be used on platforms that don't support the ISA_DMA_API. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman --- drivers/staging/c

Re: [PATCH v8 2/4] fpga manager: add sysfs interface document

> The request_firmware interface should be for the DT overlay path, and > other schemes shouldn't use it. The name should come from the DT and > no place else. For the static bindings agreed (or ACPI but that's a detail) or other dynamic discovery post boot. > 2) The bootloader starts the kernel

Re: [PATCH v8 2/4] fpga manager: add sysfs interface document

> Those people have failed to show up and provide input and/or code. That doesn't excuse failing to design the code properly. > > >> It is one thing to context switch a maths algorithm that is built to > >> be stateless, it is quite another to context switch between, say an > >> ethernet core wi

[PATCH] staging: lustre: Add blank lines after declarations

Fixes this checkpatch warning: WARNING: Missing a blank line after declarations Signed-off-by: Arno Tiemersma --- drivers/staging/lustre/lustre/include/lclient.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/lustre/lustre/include/lclient.h b/drivers/staging/lustre/lustre

Re: [PATCH v3 4/6] dgnc: checkpatch: macros in enclosed parantheses

On Wed, Jan 14, 2015 at 02:08:33PM +0100, Simone Weiss wrote: > dpacompat.h and digi.h partly define the same macros, so it is necessary to > change them both. > Could we eliminate one define? (I haven't looked so this isn't a rhetorical question). regards, dan carpenter __

Re: [PATCH] staging/iio/accel: checkpatch: fixed long lines by putting comments in seperate lines

On Wed, Jan 14, 2015 at 01:18:10PM +0100, Helene Gsaenger wrote: > +/* Flash memory write count */ > +#define ADIS16203_FLASH_CNT 0x00 Ugh. No. That's super ugly. The original was fine. Just ignore checkpatch.pl when it complains about stupid stuff. regards, dan carpenter __

[PATCH] Fixed else following return statement warning

Fixed an else block following a if block containing return statement warning found using checkpatch.pl Signed-off-by: Asheesh Ranjan --- drivers/staging/rtl8192e/rtl819x_HTProc.c | 36 ++--- 1 file changed, 17 insertions(+), 19 deletions(-) diff --git a/drivers/stagin

Re: [PATCH] staging: android: fix coding style error (v2)

Hi Dan, Thanks for your valuable input. It's appreciated. On Wed, 14 Jan 2015 12:28:44 +0300 Dan Carpenter wrote: > > lots of Cc:'s [..] > > This block is not needed. This is a whitespace patch not something > controversial where we will need to look at who was CC'd so that we > can get annoye

Re: [PATCH 00/25] staging: comedi: tidy up ISA DMA programming

On 13/01/15 17:16, H Hartley Sweeten wrote: Tidy up the ISA DMA programming in all the comedi legacy drivers to follow the programming sequence described in Documentation/DMA-ISA-LPC.txt. This series applies after: "[PATCH 00/37] staging: comedi: tidy up legacy DMA drivers" H Hartley Sweeten (2

Re: [PATCH] staging: android: fix coding style error (v2)

Put the v2 in "[PATCH v2]" so that it gets removed and not stored in the permanent changelog. On Wed, Jan 14, 2015 at 10:10:36AM +0100, Patrick Boettcher wrote: > Simple style fix - 80 char limit was exceeded. > > This is second version of the patch. Thanks Joe Perches. Put this line under the -

[PATCH] staging: android: fix coding style error (v2)

Simple style fix - 80 char limit was exceeded. This is second version of the patch. Thanks Joe Perches. Context: eudyptula challenge (http://eudyptula-challenge.org/) Signed-off-by: Patrick Boettcher Cc: Greg Kroah-Hartman Cc: Arnd Bergmann Cc: John Stultz Cc: Peter Senna Tschudin Cc: Dani

[PATCH v4] hv: hv_fcopy: drop the obsolete message on transfer failure

In the case the user-space daemon crashes, hangs or is killed, we need to down the semaphore, otherwise, after the daemon starts next time, the obsolete data in fcopy_transaction.message or fcopy_transaction.fcopy_msg will be used immediately. Cc: Jason Wang Cc: Vitaly Kuznetsov Cc: K. Y. Sriniv

Re: [PATCH] staging: android: fix coding style error

On Wed, 2015-01-14 at 09:32 +0100, Arnd Bergmann wrote: > On Wednesday 14 January 2015 09:20:42 Patrick Boettcher wrote: > > diff --git a/drivers/staging/android/sync_debug.c > > b/drivers/staging/android/sync_debug.c [] > > @@ -96,7 +96,8 @@ static void sync_print_pt(struct seq_file *s, struct >

Re: [PATCH] staging: android: fix coding style error

On Wednesday 14 January 2015 09:20:42 Patrick Boettcher wrote: > diff --git a/drivers/staging/android/sync_debug.c > b/drivers/staging/android/sync_debug.c > index 1532a86..9a2aaf8 100644 > --- a/drivers/staging/android/sync_debug.c > +++ b/drivers/staging/android/sync_debug.c > @@ -96,7 +96,8 @@

[PATCH] staging: android: fix coding style error

Simple style fix - 80 char limit was exceeded. Context: eudyptula challenge (http://eudyptula-challenge.org/) Signed-off-by: Patrick Boettcher Cc: Greg Kroah-Hartman Cc: Arnd Bergmann Cc: John Stultz Cc: Peter Senna Tschudin Cc: Daniel Vetter Cc: Maarten Lankhorst Cc: Tapasweni Pathak Cc