The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli
---
ChangeLog v12->v13:
- This patch doesn't need the DRM_MODE_FLAG_POL_*_PRESERVE flags anymore.
- code cleanup to improve readability:
- ENABLE_POL_PRESERVE is now gone
- Less modifica
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
Acked-by: Philipp Zabel
---
ChangeLog v10->v13:
- No changes
ChangeLog v9-&
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v9->v13:
- Rebased
ChangeLog v8->v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7-&
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v10->v13:
- Rebased
ChangeLog v9->v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Incl
Signed-off-by: Denis Carikli
---
ChangeLog 12->v13:
- No changes
ChangeLog 11->v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9->v10:
- New patch which was splitted out from:
"staging: imx-drm:
igned-off-by: Denis Carikli
---
ChangeLog v10->v11:
- imx53-tx53-x03x.dts change was removed because it
already had the correct setting.
ChangeLog v9->v10:
- New patch that was splitted out of:
"staging imx-drm: Use de-active and pixelclk-active
display-timings."
---
ar
Signed-off-by: Denis Carikli
---
ChangeLog v12->v13:
- Added a note explaining why the size is zero in
the eukrea_mbimxsd51_dvi(s)vga structs.
ChangeLog v11->v12:
- Rebased: It now uses the new DRM_MODE_FLAG_POL_DE flags defines names
ChangeLog v10->v11:
- New patch.
---
.../bindi
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v13:
- Rebased
- Removed enable-active-high in reg_lcd_3v3: its GPIO
already has the GPIO_ACTIVE_HIGH flag.
Without this removal, the display was off at boot
and powering it off and on
Signed-off-by: Denis Carikli
---
ChangeLog v11->v13:
- No changes
ChangeLog v9->v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6->v7:
- S
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli
---
ChangeLog v12->v13:
- Added Docbook documentation for pol_flags the struct field.
- Removed
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v13->v14:
- Rebased
ChangeLog v9->v13:
- Rebased
ChangeLog v8->v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email di
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
Acked-by: Philipp Zabel
---
ChangeLog v13->v14:
- None
ChangeLog v10->v13
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v13->v14:
- Rebased
ChangeLog v10->v13:
- Rebased
ChangeLog v9->v10:
- Rebased.
- Adde
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- Rebased
ChangeLog 12->v13:
- No changes
ChangeLog 11->v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9->v10:
- New patch which was split
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- Rebased
ChangeLog v12->v13:
- This patch doesn't need the DRM_MODE_FLAG_POL_*_PRESERVE flags anymore.
- code cleanup to improve readability:
- ENABLE_POL_PRES
igned-off-by: Denis Carikli
---
ChangeLog v13->v14:
- None
ChangeLog v10->v11:
- imx53-tx53-x03x.dts change was removed because it
already had the correct setting.
ChangeLog v9->v10:
- New patch that was splitted out of:
"staging imx-drm: Use de-active and pixelclk-active
display-
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- None
ChangeLog v11->v13:
- No changes
ChangeLog v9->v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- Fixed DRM_MODE_FLAG_POL_DE_HIGH's description.
ChangeLog v12->v
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- None
ChangeLog v12->v13:
- Added a note explaining why the size is zero in
the eukrea_mbimxsd51_dvi(s)vga structs.
ChangeLog v11->v12:
- Rebased: It now uses the new DRM_MODE_FLAG_POL_DE flags defines names
ChangeLog v10->v11:
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v13->v14:
- None
ChangeLog v10->v13:
- Rebased
- Removed enable-active-high in reg_lcd_3v3: its GPIO
already has the GPIO_ACTIVE_HIGH flag.
Without this removal, the display was off at boot
On 06/16/2014 12:11 PM, Denis Carikli wrote:> + reg_lcd_3v3: lcd-en {
> +compatible = "regulator-fixed";
> +pinctrl-names = "default";
> +pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
> +regulator-name = "
If connector->dpms is left untouched, it defaults
to DRM_MODE_DPMS_ON (0).
As a result, drm_helper_connector_dpms will exit when
it will be asked to set the state to DRM_MODE_DPMS_ON,
because it is already set.
That issue prevented displays from turning on at boot.
Signed-off-by: Denis Cari
On 06/16/2014 02:29 PM, Denis Carikli wrote:
[...]
> Which result at the lcd regulator being physically powered on at boot.
> I didn't see that because powering it on at boot is what I want.
I fixed that in imx-drm's parallel-display with another patch I just
sent separately.
Denis.
On 06/24/2014 05:13 PM, Russell King - ARM Linux wrote:
[...]
> If you'd like to send me better commit messages for
> these patches, I'll add them to what I already have:
> imx-drm: use defines for clock polarity settings
The comment of the clk_pol field of the ipu_di_signal_cfg struct was
On 06/25/2014 12:04 AM, Thierry Reding wrote:
>> because on this very simple display board, we only have DVI LVDS signals
>> without the I2C to detect the display.
>
> That's unfortunate. In that case perhaps a better approach would be to
> add a video timings node to the device that provides the D
On 06/24/2014 05:06 PM, Russell King - ARM Linux wrote:
> It would be better if you separate the
> binding documentation updates from the other functional changes too.
Fixed.
Denis.
On 06/25/2014 06:48 AM, Sascha Hauer wrote:
>> +#define ENABLE_POL_LOW 0
>> +#define ENABLE_POL_HIGH 1
>
> Adding defines without a proper namespace (IPU_) outside a driver
> private header file is not nice. Anyway, instead of adding the
> defines ...
Fixed in "imx-drm: use
linuxdriverproject.org
Cc: David Airlie
Cc: dri-devel at lists.freedesktop.org
Cc: Mauro Carvalho Chehab
Cc: Laurent Pinchart
Cc: linux-media at vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
Acked-by: Mauro
Cc: linux-media at vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v5:
- Use the correct RGB order.
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed the
Cc: linux-media at vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v5:
- New patch.
---
arch/arm/boot/dts/imx51-apf51dev.dts|2 +-
arch/arm/boot/dts/imx53-m53evk.dts |2
Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v5:
- Code clenaup.
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- the lcd-supply is now called display-supply (not all display are LCD).
- The code and documen
at linuxdriverproject.org
Cc: Philipp Zabel
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: David Airlie
Cc: dri-devel at lists.freedesktop.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v4:
- The old patch was named "staging: imx-dr
Signed-off-by: Denis Carikli
---
drivers/gpu/ipu-v3/ipu-di.c |4 ++--
drivers/staging/imx-drm/ipuv3-crtc.c |4 ++--
include/video/imx-ipu-v3.h |8 +++-
3 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased on top of:
"211e7f
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v8->v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7->v8:
- Shrinked even mo
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Included Lothar Wa?mann's suggest
According to the datasheet, setting the di0_polarity_disp_clk
field in the GENERAL di register sets the output clock polarity
to active high.
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that is now needed by the
"staging: imx-drm: Use de-active and pixelclk-activ
igned-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that was splitted out of:
"staging imx-drm: Use de-active and pixelclk-active
display-timings."
---
arch/arm/boot/dts/imx51-babbage.dts |2 ++
arch/arm/boot/dts/imx53-m53evk.dts|2 ++
arch/arm/b
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- Since the imx-drm won't be able to retrive its regulators
from the dev
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- This patch was splitted-out and adapted from:
"Prepare imx-drm for extra display-timings retrival."
- The display-timings dt specific part was removed.
- Th
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- New patch.
---
.../bindings/panel/eukrea,mbimxsd51-cmo-qvga.txt |7 ++
.../bindings/panel/eukrea,mbimxsd51-dvi-svga.txt |7 ++
.../bindings/panel/eukrea,mbimxsd51-dvi-vga.txt|7 ++
drivers/gpu/drm/panel/panel-simpl
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- Now uses the drm-panel instead of the display-timings.
This is to get regulator support, which is lacking in
the imx-drm driver when using the display-timings.
ChangeLog v9->v10:
- R
Signed-off-by: Denis Carikli
---
ChangeLog v9->v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeL
The DRM_PANEL_SIMPLE is needed by the eukrea
mbimxsd51's displays.
Signed-off-by: Denis Carikli
---
- New patch, splitting it would be overkill.
---
arch/arm/configs/imx_v6_v7_defconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig
b/arc
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch which was splitted out from:
"staging: imx-drm: Use de-active and pixelclk-active display-timings.".
- Fixes many issues in "staging: imx-drm: Use de-active and pixelclk-active
display-timings.":
- Mo
lists.freedesktop.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: Fabio Estevam
Cc: Sascha Hauer
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
drivers/gpu/drm/drm_modes.c |9 +
include/uapi/drm/drm_mode.h |4
2 files
lists.freedesktop.org
Cc: Mauro Carvalho Chehab
Cc: Laurent Pinchart
Cc: linux-media at vger.kernel.org
Cc: Sascha Hauer
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
.../bindings/staging/imx-drm/fsl-imx-drm.txt |2 +-
drivers/staging/imx-drm/ipu-v3
linuxdriverproject.org
Cc: David Airlie
Cc: dri-devel at lists.freedesktop.org
Cc: Mauro Carvalho Chehab
Cc: Laurent Pinchart
Cc: linux-media at vger.kernel.org
Cc: Sascha Hauer
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
include/uapi/linux/videodev2.h
linuxdriverproject.org
Cc: David Airlie
Cc: dri-devel at lists.freedesktop.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: Fabio Estevam
Cc: Sascha Hauer
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
drivers/staging/imx-drm/parallel-display.c | 26
Signed-off-by: Denis Carikli
---
drivers/staging/imx-drm/ipuv3-crtc.c |6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c
b/drivers/staging/imx-drm/ipuv3-crtc.c
index 6fd37a7..9279294 100644
--- a/drivers/staging/imx-drm/ipuv3-crtc.c
lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
drivers/staging/imx-drm/parallel-display.c | 19 +++
1 file changed, 19 insertions(+)
diff --git a/drivers/staging/imx-drm/parallel-display.c
b/drivers/staging/imx-drm/parallel-display.c
index 1c8f63f..dfab7b5
Hi,
On 10/18/2013 09:46 AM, Ville Syrj?l? wrote:
>> +#define DRM_MODE_FLAG_PDATEN(1<<22)
>> +#define DRM_MODE_FLAG_NDATEN(1<<23)
>> +#define DRM_MODE_FLAG_PPIXDATEDGE (1<<24)
>> +#define DRM_MODE_FLAG_NPIXDATEDGE (1<<25)
>
> Do we
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli
Acked-by: Mauro Carvalho Chehab
Acked-by: Laurent Pinchart
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased on top of:
"211e7f
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v8->v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7->v8:
- Shrinked even mo
According to the datasheet, setting the di0_polarity_disp_clk
field in the GENERAL di register sets the output clock polarity
to active high.
Signed-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that is now needed by the
"staging: imx-drm: Use de-active and pixelclk-activ
Signed-off-by: Denis Carikli
---
ChangeLog 11->v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9->v10:
- New patch which was splitted out from:
"staging: imx-drm: Use de-active and pixelclk-act
igned-off-by: Denis Carikli
---
ChangeLog v9->v10:
- New patch that was splitted out of:
"staging imx-drm: Use de-active and pixelclk-active
display-timings."
---
arch/arm/boot/dts/imx51-babbage.dts |2 ++
arch/arm/boot/dts/imx53-m53evk.dts|2 ++
arch/arm/b
Signed-off-by: Denis Carikli
---
ChangeLog v9->v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeL
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli
Acked-by: Philipp Zabel
---
ChangeLog v9->v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Included Lothar Wa?mann's suggest
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- Now uses the drm-panel instead of the display-timings.
This is to get regulator support, which is lacking in
the imx-drm driver when using the display-timings.
ChangeLog v9->v10:
- R
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli
---
ChangeLog v11->v12:
- Rebased: This patch now applies against drm_modes.h
- Rebased: It now uses
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli
---
ChangeLog v11->v12:
- Rebased: It now uses the following new flags defines names:
CLK_POL, ENABLE_POL
- The inversions in ipuv3-crtc.c are now fixed.
- ipuv3-crtc.c was still using m
Signed-off-by: Denis Carikli
---
ChangeLog v11->v12:
- Rebased: It now uses the new DRM_MODE_FLAG_POL_DE flags defines names
ChangeLog v10->v11:
- New patch.
---
.../bindings/panel/eukrea,mbimxsd51-cmo-qvga.txt |7 ++
.../bindings/panel/eukrea,mbimxsd51-dvi-svga.txt
The DRM_PANEL_SIMPLE is needed by the eukrea
mbimxsd51's displays.
Signed-off-by: Denis Carikli
---
ChangeLog v10->v11:
- New patch, splitting it would be overkill.
---
arch/arm/configs/imx_v6_v7_defconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm
On 04/08/2014 08:36 AM, Andrzej Hajda wrote:
>
> Hi Denis,
Hi,
>> +#define DRM_MODE_FLAG_POL_PIXDATA_NEGEDGE BIT(1)
>> +#define DRM_MODE_FLAG_POL_PIXDATA_POSEDGE BIT(2)
>> +#define DRM_MODE_FLAG_POL_PIXDATA_PRESERVE BIT(3)
>
> What is the purpose of DRM_MODE_FLAG_POL_PIXDATA_PRESERVE?
> If 'p
: Greg Kroah-Hartman
Cc: Philipp Zabel
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: dri-devel at lists.freedesktop.org
Cc: driverdev-devel at linuxdriverproject.org
Cc: linux-arm-kernel at lists.infradead.org
Signed-off-by: Denis Carikli
---
ChangeLog v5->v6:
- Remove people not concerned by this pa
linuxdriverproject.org
Cc: David Airlie
Cc: dri-devel at lists.freedesktop.org
Cc: Mauro Carvalho Chehab
Cc: Laurent Pinchart
Cc: linux-media at vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
Acked-by: Mauro
: Eric B?nard
Signed-off-by: Denis Carikli
---
drivers/staging/imx-drm/ipuv3-crtc.c |6 --
1 file changed, 4 insertions(+), 2 deletions(-)
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Ajusted the flags to match the changes in "drm: Add the lacking
DRM_MODE_FL
Cc: linux-media at vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed the commit message long desciption that was just a copy
Cc: Ville Syrjala
Cc: dri-devel at lists.freedesktop.org
Cc: Fabio Estevam
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed a duplicated
linuxdriverproject.org
Cc: David Airlie
Cc: dri-devel at lists.freedesktop.org
Cc: Mauro Carvalho Chehab
Cc: Laurent Pinchart
Cc: linux-media at vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
Acked-by: Mauro
at linuxdriverproject.org
Cc: Philipp Zabel
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: David Airlie
Cc: dri-devel at lists.freedesktop.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v3->v4:
- The old patch was named "staging: imx-dr
Cc: linux-media at vger.kernel.org
Cc: Sascha Hauer
Cc: Shawn Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed the commit message long desciption that was just a copy
Guo
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- the lcd-supply is now called display-supply (not all display are LCD).
- The code and documentation was updated accordin
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Cc: Shawn Guo
Cc: Sascha Hauer
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51
boards.
- This patch
Cc: Shawn Guo
Cc: Sascha Hauer
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51
boards.
- This patch now only adds backlight support.
- Added s
The eukrea mbimxsd51 has a gpio backlight for its
LCD display, so we turn that driver on.
Cc: Sascha Hauer
Cc: linux-arm-kernel at lists.infradead.org
Cc: Fabio Estevam
Cc: Shawn Guo
Cc: Eric B?nard
Signed-off-by: Denis Carikli
---
arch/arm/configs/imx_v6_v7_defconfig |1 +
1 file
77 matches
Mail list logo
