Hi Sascha:
On 8/24/22 15:07, Sascha Hauer wrote:
Hi Andy Et al.,
On Mon, Aug 22, 2022 at 05:20:15PM +0200, Sascha Hauer wrote:
This series adds support for 4k@30 to the rockchip HDMI controller. This
has been tested on a rk3568 rock3a board. It should be possible to add
4k@60 support the same
Hi all
Am Fr., 26. Aug. 2022 um 21:07 Uhr schrieb Lucas Stach :
>
> From: Marco Felsch
>
> The GPU is found on the NXP i.MX8MN SoC. The feature bits are taken from
> the NXP downstream kernel driver 6.4.3.p2.
>
Can we stop adding new entries to the kernel hwdb and start to
establish a hwdb in th
> The i.MX8MN SoC errata sheet mentions ERR050226: "GPU: Texture L2 Cache
> idle signal may incorrectly clock gate the texture engine in GPU".
>
> The workaround is to disable the corresponding clock gatings.
>
> While on it move the clock gating check for rev6202 into the same check
> to bundle th
>
> The GC300's features register doesn't specify that a 2D pipe is
> available, and like the GC600, its idle register reports zero bits where
> modules aren't present.
>
> Signed-off-by: Doug Brown
Reviewed-by: Christian Gmeiner
> ---
> drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 11 +--
>
715
base: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
config: sparc-allyesconfig
(https://download.01.org/0day-ci/archive/20220903/202209031904.q8ejt6x4-...@intel.com/config)
compiler: sparc64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget
https://raw.githubuserco
Hi
>
> Older GC300 revisions have their power registers at an offset of 0x200
> rather than 0x100.
>
> Signed-off-by: Doug Brown
> ---
> drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 16 ++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/etnaviv/etnavi
Some panels trigger HPD irq due to noise, the HPD debounce
may be 1.8ms, exceeding the default irq detect window, ~1.4ms.
This patch set HPD irq detection window to 2ms to
tolerate the HPD noise.
Signed-off-by: Xin Ji
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 14 ++
drivers/gpu
On 8/23/22 08:29, Jouni Högander wrote:
> We need to set also src_x, src_y, src_w and src_h for the mock plane.
> After fix for drm_atomic_helper_damage_iter_init we are using these
> when iterating damage_clips.
>
> Signed-off-by: Jouni Högander
Tested-by: Maíra Canal
Best Regards,
- Maíra Ca
Hi "Maíra,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on drm-misc/drm-misc-next]
[also build test WARNING on drm/drm-next drm-intel/for-linux-next
drm-tip/drm-tip linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly dro
Hi,
Something you might have a head up for it,
have a mediapipe application for POSE which use the T860 GPU for the calculation
but the kernel driver report error (js fault) - I see one or 2 calculation
frames on the mat-picture output only before
the pipe stop working.
Linux bullseye64 5.19.
10 matches
Mail list logo