Convert to use vm_insert_range() to map range of kernel
memory to user vma.
Signed-off-by: Souptick Joarder
Tested-by: Heiko Stuebner
Acked-by: Heiko Stuebner
---
drivers/gpu/drm/rockchip/rockchip_drm_gem.c | 19 ++-
1 file changed, 2 insertions(+), 17 deletions(-)
diff --git
From: Young Xiao
If for some unexpected reason the registers all read zero it's better
to WARN and return instead of dividing by zero and completely freezing
the machine.
See commit 0e005888b833 ("drm/i915: avoid division by zero on
cnl_calc_wrpll_link") for detail.
Signed-off-by: Young Xiao
-
On Mon, Dec 17, 2018 at 05:18:30PM +0800, YueHaibing wrote:
> In case of error, the function devm_ioremap_resource() returns ERR_PTR()
> and never returns NULL. The NULL test in the return value check should
> be replaced with IS_ERR().
>
> Fixes: 8f1597c8f1a5 ("drm: shmobile: Perform initializati
On Thu, Oct 25, 2018 at 12:36:01PM -0700, Nathan Chancellor wrote:
> This warning is disabled by default in scripts/Makefile.extrawarn when
> W= is not provided but this Makefile adds -Wall after this warning is
> disabled so it shows up in the build when it shouldn't:
>
> In file included from dr
On Thu, Dec 13, 2018 at 08:20:45PM +, Fabrizio Castro wrote:
> Document the RZ/G2E (a.k.a. r8a774c0) SoC in the R-Car DU bindings.
>
> Signed-off-by: Fabrizio Castro
Reviewed-by: Simon Horman
___
dri-devel mailing list
dri-devel@lists.freedesktop
Hi all,
Thanks Tomasz for adding all the mailing lists.
I prefer to ask first if a qos_hdmi exists before sending it in for
public review.
All the clocks in the pmu node seem to have a "quality-of-service" (QoS)
block.
So I added one for hdmi too with the question if it exists and which
address i
From: Young Xiao
When looking up the connector type make sure the index
is valid. Avoids a later crash if we read past the end
of the array.
See commit e1718d97aa88 ("drm/amdgpu: avoid a possible
array overflow") for detail.
Signed-off-by: Young Xiao
---
drivers/gpu/drm/radeon/radeon_atombio
Previouly drivers have their own way of mapping range of
kernel pages/memory into user vma and this was done by
invoking vm_insert_page() within a loop.
As this pattern is common across different drivers, it can
be generalized by creating a new function and use it across
the drivers.
vm_insert_ra
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: 8f1597c8f1a5 ("drm: shmobile: Perform initialization/cleanup at
probe/remove time")
Signed-off-by: YueHaibing
---
dri
From: Kuninori Morimoto
This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto
---
few weeks passed, nothing happen. I re-post this patch again.
I added Andrew on Cc
drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 5 +
Eric, thanks for answer,
I am in doubt the type of my panel. It is Himax HX8379A-based panel.
Is there a deterministic way to find out which type of panel I have,
video or command ?
Sergey
On 12/17/18 9:12 PM, Eric Anholt wrote:
Sergey Suloev writes:
Eric, Noralf,
could either of you
On Thu, Dec 13, 2018 at 08:20:54PM +, Fabrizio Castro wrote:
> The RZ/G2E (r8a774c0) supports two LVDS channels. Extend the binding to
> support them.
>
> Signed-off-by: Fabrizio Castro
Reviewed-by: Simon Horman
___
dri-devel mailing list
dri-dev
On Mon, 17 Dec 2018 at 15:22, Vincent Guittot
wrote:
>
> On Fri, 14 Dec 2018 at 15:36, Ulf Hansson wrote:
> >
> > On Fri, 14 Dec 2018 at 15:22, Vincent Guittot
> > wrote:
> > >
> > > With jiffies been replaced by raw ns in PM core accounting, 915 driver is
> > > updated to use this new time infr
On 12/17/18 5:19 AM, Oleksandr Andrushchenko wrote:
> Hello, Juergen, Boris!
>
> As this DRM part of the series is the only one which needs ack/nack
>
> (and it might take quite some time to complete) could we please
>
> merge the patches 1 and 3 now that already have ack/r-b?
>
TBH I am not sur
Convert to use vm_insert_range() to map range of kernel
memory to user vma.
Signed-off-by: Souptick Joarder
Reviewed-by: Matthew Wilcox
Reviewed-by: Oleksandr Andrushchenko
---
drivers/gpu/drm/xen/xen_drm_front_gem.c | 20 ++--
1 file changed, 6 insertions(+), 14 deletions(-)
On Thu, Dec 13, 2018 at 08:23:36PM +, Fabrizio Castro wrote:
> The LVDS implementation on the RZ/G2E (a.k.a. R8A774C0) is very similar
> to the one found on R-Car E3 (a.k.a. R8A77990), therefore add RZ/G2E
> LVDS support to the LVDS encoder driver in a similar fashion to what
> done for R-Car E
On 12/17/18 10:03 AM, Oleksandr Andrushchenko wrote:
> On 12/17/18 4:52 PM, Boris Ostrovsky wrote:
>> On 12/17/18 5:19 AM, Oleksandr Andrushchenko wrote:
>>> Hello, Juergen, Boris!
>>>
>>> As this DRM part of the series is the only one which needs ack/nack
>>>
>>> (and it might take quite some time
Previouly drivers have their own way of mapping range of
kernel pages/memory into user vma and this was done by
invoking vm_insert_page() within a loop.
As this pattern is common across different drivers, it can
be generalized by creating a new function and use it across
the drivers.
vm_insert_ra
On 12/17/18 5:26 PM, Boris Ostrovsky wrote:
On 12/17/18 10:03 AM, Oleksandr Andrushchenko wrote:
On 12/17/18 4:52 PM, Boris Ostrovsky wrote:
On 12/17/18 5:19 AM, Oleksandr Andrushchenko wrote:
Hello, Juergen, Boris!
As this DRM part of the series is the only one which needs ack/nack
(and it
On Tue, Dec 18, 2018 at 7:47 AM Laurent Pinchart
wrote:
>
> Hi Morimoto-san,
>
> Thank you for the patch.
>
> On Tuesday, 18 December 2018 08:00:24 EET Kuninori Morimoto wrote:
> > From: Kuninori Morimoto
> >
> > This patch updates license to use SPDX-License-Identifier
> > instead of verbose lic
On Mon, Sep 17, 2018 at 5:49 PM Sean Paul wrote:
>
> On Thu, Sep 13, 2018 at 01:23:00PM +0530, Archit Taneja wrote:
> > I have moved on to other stuff for now. Haven't been able to make time
> > to review bridge related work. Andrzej has been doing it by himself
> > for a while now.
> >
> > Cc: An
Hi Daniel,
On Tuesday, 18 December 2018 11:39:22 EET Daniel Vetter wrote:
> On Mon, Sep 17, 2018 at 5:49 PM Sean Paul wrote:
> > On Thu, Sep 13, 2018 at 01:23:00PM +0530, Archit Taneja wrote:
> >> I have moved on to other stuff for now. Haven't been able to make time
> >> to review bridge related
Hi Daniel,
On Tuesday, 18 December 2018 11:37:14 EET Daniel Vetter wrote:
> On Tue, Dec 18, 2018 at 7:47 AM Laurent Pinchart wrote:
> > On Tuesday, 18 December 2018 08:00:24 EET Kuninori Morimoto wrote:
> >> From: Kuninori Morimoto
> >>
> >> This patch updates license to use SPDX-License-Identif
On Mon, Dec 17, 2018 at 3:22 PM Vincent Guittot
wrote:
>
> On Fri, 14 Dec 2018 at 15:36, Ulf Hansson wrote:
> >
> > On Fri, 14 Dec 2018 at 15:22, Vincent Guittot
> > wrote:
> > >
> > > With jiffies been replaced by raw ns in PM core accounting, 915 driver is
> > > updated to use this new time in
On Tue, Dec 18, 2018 at 01:53:34AM +0530, Souptick Joarder wrote:
> Convert to use vm_insert_range() to map range of kernel
> memory to user vma.
>
> Signed-off-by: Souptick Joarder
> Tested-by: Heiko Stuebner
> Acked-by: Heiko Stuebner
> ---
> drivers/gpu/drm/rockchip/rockchip_drm_gem.c | 19
On Tue, 18 Dec 2018 at 10:57, Rafael J. Wysocki wrote:
>
> On Mon, Dec 17, 2018 at 3:22 PM Vincent Guittot
> wrote:
> >
> > On Fri, 14 Dec 2018 at 15:36, Ulf Hansson wrote:
> > >
> > > On Fri, 14 Dec 2018 at 15:22, Vincent Guittot
> > > wrote:
> > > >
> > > > With jiffies been replaced by raw n
On Tue, Dec 18, 2018 at 10:58 AM Vincent Guittot
wrote:
>
> On Tue, 18 Dec 2018 at 10:57, Rafael J. Wysocki wrote:
> >
> > On Mon, Dec 17, 2018 at 3:22 PM Vincent Guittot
> > wrote:
> > >
> > > On Fri, 14 Dec 2018 at 15:36, Ulf Hansson wrote:
> > > >
> > > > On Fri, 14 Dec 2018 at 15:22, Vincen
On Tue, 18 Dec 2018 at 11:03, Rafael J. Wysocki wrote:
>
> On Tue, Dec 18, 2018 at 10:58 AM Vincent Guittot
> wrote:
> >
> > On Tue, 18 Dec 2018 at 10:57, Rafael J. Wysocki wrote:
> > >
> > > On Mon, Dec 17, 2018 at 3:22 PM Vincent Guittot
> > > wrote:
> > > >
> > > > On Fri, 14 Dec 2018 at 15:
Assumption that git directory is always located at REPO/.git is incorrect,
especially in case of git worktrees. There is already function to deal
with it correctly - git_dir, let's then use it.
Signed-off-by: Andrzej Hajda
Reviewed-by: Daniel Vetter
---
dim | 13 -
1 file changed, 4
Hi all,
This small patchset fixes issues with dim and git worktree's.
In v2 I have:
- removed incorrect rr_cache_dir fix patch,
- added patch fixing update_rerere_cache,
- added patch converting git_dir function to use git rev_parse,
- added R-Bs (thanks Daniel).
Regards
Andrzej
Andrzej Haj
git_dir function returns git directory for current working directory.
Allowing specifying any directory allows to reuse it more widely.
Signed-off-by: Andrzej Hajda
Reviewed-by: Daniel Vetter
---
dim | 8 +---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/dim b/dim
index 709
Using rev-parse git option is safer than manually parsing git files.
Signed-off-by: Andrzej Hajda
---
dim | 8 +---
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/dim b/dim
index e4a4afe..e999409 100755
--- a/dim
+++ b/dim
@@ -556,13 +556,7 @@ function check_conflicts # tree
update_rerere_cache does not work correctly if drm-tip and $DIM_REPO are
workdirs - it cannot locate properly rr-cache. Let's use git rev-parse
to resolve rr-cache location.
Signed-off-by: Andrzej Hajda
---
dim | 25 -
1 file changed, 12 insertions(+), 13 deletions(-)
di
On 18.12.2018 10:53, Laurent Pinchart wrote:
> Hi Daniel,
>
> On Tuesday, 18 December 2018 11:39:22 EET Daniel Vetter wrote:
>> On Mon, Sep 17, 2018 at 5:49 PM Sean Paul wrote:
>>> On Thu, Sep 13, 2018 at 01:23:00PM +0530, Archit Taneja wrote:
I have moved on to other stuff for now. Haven't b
Hi Daniel, Dave,
updated pull request with Christian's review added below.
Regards,
Lucas
The following changes since commit 6fce3a406108ee6c8a61e2a33e52e9198a626ea0:
drm/etnaviv: fix bogus fence complete check in timeout handler (2018-11-05
18:14:48 +0100)
are available in the Git reposito
Op 17-12-2018 om 15:19 schreef Hans de Goede:
> When the pipe_config's update_pipe flag is set we may need to update the
> panel fitting settings. On GEN9+ this means we need to update the crtc's
> scaler settings.
>
> This fixes the following WARN_ON, during i915 loading on an Asrock
> B150M Pro4S
https://bugzilla.kernel.org/show_bug.cgi?id=202019
Bug ID: 202019
Summary: amdgpu: fan speed reported incorrectly when the fan is
off
Product: Drivers
Version: 2.5
Kernel Version: 4.20-rc7
Hardware: All
Remove unused functions and macros from files handling
dpu hardware interrupts.
changes in v2:
Removed clear_interrupt_status (Jordan Crouse)
changes in v3:
Changed commit text
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 44 ---
https://bugs.freedesktop.org/show_bug.cgi?id=109085
Bug ID: 109085
Summary: Radeon driver crashes with a message "ring 0 stalled
for more than 10344msec" when using Citra and others
Product: DRI
Version: unspecified
Hardwar
https://bugs.freedesktop.org/show_bug.cgi?id=109085
Łukasz Skocz changed:
What|Removed |Added
See Also||https://bugs.freedesktop.or
https://bugs.freedesktop.org/show_bug.cgi?id=102909
Łukasz Skocz changed:
What|Removed |Added
See Also||https://bugs.freedesktop.or
https://bugs.freedesktop.org/show_bug.cgi?id=109085
--- Comment #1 from Łukasz Skocz ---
Created attachment 142846
--> https://bugs.freedesktop.org/attachment.cgi?id=142846&action=edit
another dmesg output
--
You are receiving this mail because:
You are the assignee for the bug.__
https://bugzilla.kernel.org/show_bug.cgi?id=202019
Felix Schwarz (felix.schw...@oss.schwarz.eu) changed:
What|Removed |Added
CC||felix.schwa
https://bugzilla.kernel.org/show_bug.cgi?id=202019
--- Comment #2 from Felix Schwarz (felix.schw...@oss.schwarz.eu) ---
Oh and probably AMD developers would like to know which kernel version you are
using.
--
You are receiving this mail because:
You are watching the assignee of the bug.
Quoting Nick Desaulniers (2018-10-25 23:20:58)
> On Thu, Oct 25, 2018 at 12:36 PM Nathan Chancellor
> wrote:
> >
> > This warning is disabled by default in scripts/Makefile.extrawarn when
> > W= is not provided but this Makefile adds -Wall after this warning is
> > disabled so it shows up in the b
https://bugzilla.kernel.org/show_bug.cgi?id=202019
Aleksandr Mezin (mezin.alexan...@gmail.com) changed:
What|Removed |Added
Severity|normal |low
--- Com
https://bugzilla.kernel.org/show_bug.cgi?id=202019
--- Comment #4 from Aleksandr Mezin (mezin.alexan...@gmail.com) ---
(In reply to Felix Schwarz from comment #2)
> Oh and probably AMD developers would like to know which kernel version you
> are using.
It's here, in "Kernel Version" field in bugz
Hi Neil,
On 30.11.2018 14:42, Neil Armstrong wrote:
> Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
> Scrambling when supported or mandatory.
>
> This patch also adds an helper to setup the control bit to support
> the high TMDS Bit Period/TMDS Clock-Period Ratio as required
On Tue, Dec 18, 2018 at 11:30:12AM +0100, Andrzej Hajda wrote:
> Hi all,
>
> This small patchset fixes issues with dim and git worktree's.
> In v2 I have:
> - removed incorrect rr_cache_dir fix patch,
> - added patch fixing update_rerere_cache,
> - added patch converting git_dir function to use
On Tue, Dec 18, 2018 at 05:36:04PM +0530, Souptick Joarder wrote:
> On Tue, Dec 18, 2018 at 3:27 PM Russell King - ARM Linux
> wrote:
> > This looks like a change in behaviour.
> >
> > If user_count is zero, and offset is zero, then we pass into
> > vm_insert_range() a page_count of zero, and vm_i
On 30.11.2018 14:42, Neil Armstrong wrote:
> Add support for TMDS Clock > 3.4GHz for HDMI2.0 display modes.
>
> Signed-off-by: Neil Armstrong
> ---
> drivers/gpu/drm/meson/meson_dw_hdmi.c | 24
> 1 file changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gp
On 30.11.2018 14:42, Neil Armstrong wrote:
> Now we support the TMDS Clock > 3.4GHz and support the SCDC Control
> operation in the DW-HDMI Controller, we can enable support for the
> HDMI2.0 3840x2160@60/50 RGB444 display modes.
>
> Signed-off-by: Neil Armstrong
> ---
> drivers/gpu/drm/meson/mes
On Tue, Dec 18, 2018 at 06:24:29PM +0530, Souptick Joarder wrote:
> On Tue, Dec 18, 2018 at 6:03 PM Russell King - ARM Linux
> wrote:
> >
> > On Tue, Dec 18, 2018 at 05:36:04PM +0530, Souptick Joarder wrote:
> > > On Tue, Dec 18, 2018 at 3:27 PM Russell King - ARM Linux
> > > wrote:
> > > > This
From: Colin Ian King
There are several variables that are defined and never used and hence can
be removed. Remove them. Cleans up clang -Wunused-const-variable warnings:
warning: ‘dvi_hdmi_dongle_signature_str’ defined but not used
warning: ‘dce11_one_lpt_channel_max_resolution’ defined but not
On 18/12/2018 13:25, Andrzej Hajda wrote:
> Hi Neil,
>
>
> On 30.11.2018 14:42, Neil Armstrong wrote:
>> Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
>> Scrambling when supported or mandatory.
>>
>> This patch also adds an helper to setup the control bit to support
>> the hi
On 18/12/2018 13:36, Andrzej Hajda wrote:
> On 30.11.2018 14:42, Neil Armstrong wrote:
>> Add support for TMDS Clock > 3.4GHz for HDMI2.0 display modes.
>>
>> Signed-off-by: Neil Armstrong
>> ---
>> drivers/gpu/drm/meson/meson_dw_hdmi.c | 24
>> 1 file changed, 20 inserti
On Fri, Oct 26, 2018 at 10:09 AM Rob Clark wrote:
>
> BACKLIGHT_CLASS_DEVICE is already tristate, but a dependency
> FB_BACKLIGHT prevents it from being built as a module. There
> doesn't seem to be any particularly good reason for this, so
> switch FB_BACKLIGHT over to tristate.
>
> Signed-off-b
Remove unused functions from dpu plane interface
and unused variables from dpu plane state structure.
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 27 ---
1 file changed, 27 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plan
On Tue, Dec 18, 2018 at 12:00:45PM +0100, Lucas Stach wrote:
> Hi Daniel, Dave,
>
> updated pull request with Christian's review added below.
>
> Regards,
> Lucas
Thanks, applied. tagged pull would be really nice, avoids me having to
find v1 for the merge commit message.
Cheers, Daniel
>
> The
This patch serie removes drm_mode_object dependency from
drm_display_mode struct. This is part of KMS cleanup.
Shayenne Moura (7):
drm: msm: Delete base.id prints
drm: Remove use of drm_mode_object
drm: omapdrm: Delete base.id prints
drm: i915: Delete base.id prints
drm: sti: Delete
This patch removes base.id prints from drm_display_mode
objects in msm files. It removes dependency from drm_mode_object.
Signed-off-by: Shayenne Moura
---
drivers/gpu/drm/msm/disp/mdp4/mdp4_crtc.c | 4 ++--
drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c | 4 ++--
drivers/gpu/drm/msm/
This patch removes the drm_mode_object prints, evaluation and use from
drm_display_mode objects used in drm files. It removes dependency from
drm_mode_object.
Signed-off-by: Shayenne Moura
---
drivers/gpu/drm/drm_crtc_helper.c | 5 ++---
drivers/gpu/drm/drm_modes.c | 9 -
2 files
This patch removes base.id prints from drm_display_mode
objects in omapdrm files. It removes dependency from drm_mode_object.
Signed-off-by: Shayenne Moura
---
drivers/gpu/drm/omapdrm/omap_connector.c | 4 ++--
drivers/gpu/drm/omapdrm/omap_crtc.c | 4 ++--
2 files c
This patch finalizes the KMS cleanup task dependency from drm_display_mode
It removes the use of drm_mode_object from drm_display_mode struct
and it removes the use of base.id and base.type.
Signed-off-by: Shayenne Moura
---
include/drm/drm_modes.h | 21 +++--
1 file changed, 3 i
This patch removes base.id prints from drm_display_mode
objects in meson files. It removes dependency from drm_mode_object.
Signed-off-by: Shayenne Moura
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 9 -
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git
This patch removes base.id prints from drm_display_mode
objects in sti files. It removes dependency from drm_mode_object.
Signed-off-by: Shayenne Moura
---
drivers/gpu/drm/sti/sti_crtc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/
This patch removes base.id prints from drm_display_mode
objects in i915 files. It removes dependency from drm_mode_object.
Signed-off-by: Shayenne Moura
---
drivers/gpu/drm/i915/i915_debugfs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/driver
On Tue, Dec 18, 2018 at 09:25:08PM +0800, YueHaibing wrote:
> strncmp() stops comparing when either the end of one of the first two
> arguments is reached or when 'n' characters have been compared, whichever
> comes first.That means that strncmp(s1, s2, n) is equivalent to
> strcmp(s1, s2) if n e
On 30.11.2018 14:42, Neil Armstrong wrote:
> In order to support the HDMI2.0 YUV420 display modes, this patch
> adds support for the YUV420 TMDS Clock divided by 2 and the controller
> passthrough mode.
>
> YUV420 Synopsys PHY support will need some specific configuration table
> to support theses
Quoting Kuo-Hsin Yang (2018-12-17 09:04:01)
> The gem drivers use shmemfs to allocate backing storage for gem objects.
> On Samsung Chromebook Plus, the drm/rockchip driver may call
> rockchip_gem_get_pages -> drm_gem_get_pages -> shmem_read_mapping_page
> to pin a lot of pages, breaking the page r
On Mon, Dec 17, 2018 at 02:44:15PM -0800, Matt Roper wrote:
> We currently program userspace-provided gamma and degamma LUT's into our
> hardware without really checking to see whether they satisfy our
> hardware's rules. We should try to catch tables that are invalid for
> our hardware early and
https://bugs.freedesktop.org/show_bug.cgi?id=109073
--- Comment #5 from fin4...@hotmail.com ---
Use latest AMd wip kernel, firmware files and Oibaf ppa.
https://cgit.freedesktop.org/~agd5f/linux/log/?h=drm-next-4.21-wip
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/l
Move pm_runtime accounted time to raw nsec. The subject of the patchset
has changed as the 1st patch has been queued by Rafael
Patch 1 adds a new pm_runtime interface to get accounted suspended time
Patch 2 moves drm/i915 driver on the new interface and removes access to
internal
fields
Patch 3
Some drivers (like i915/drm) need to get the accounted suspended time.
pm_runtime_accounted_time_get() will return the suspended or active
accounted time until now.
Signed-off-by: Vincent Guittot
---
drivers/base/power/runtime.c | 26 ++
include/linux/pm_runtime.h | 2
Use the new pm runtime interface to get the accounted suspended time:
pm_runtime_accounted_time_get()
Signed-off-by: Vincent Guittot
---
drivers/gpu/drm/i915/i915_pmu.c | 18 --
drivers/gpu/drm/i915/i915_pmu.h | 4 ++--
2 files changed, 10 insertions(+), 12 deletions(-)
diff --
From: Thara Gopinath
This patch replaces jiffies based accounting for runtime_active_time
and runtime_suspended_time with ktime base accounting. This makes the
runtime debug counters inline with genpd and other pm subsytems which
uses ktime based accounting.
Signed-off-by: Thara Gopinath
[move
https://bugs.freedesktop.org/show_bug.cgi?id=107978
--- Comment #35 from Jerry Zuo ---
"startup monitor sleep regression". Please give more details on that. Thanks.
--
You are receiving this mail because:
You are the assignee for the bug.___
dri-devel
On Tue, Dec 18, 2018 at 9:55 PM Chris Wilson wrote:
>
> Quoting Kuo-Hsin Yang (2018-12-17 09:04:01)
> >
> > E.g. when the size of a zone is 3.9 GiB, the inactive_ratio is 5. If
> > active_anon / inactive_anon < 5 and all pages in the inactive_anon lru
> > are pinned, page reclaim would keep scanni
Hi,
On 18-12-18 12:07, Maarten Lankhorst wrote:
Op 17-12-2018 om 15:19 schreef Hans de Goede:
When the pipe_config's update_pipe flag is set we may need to update the
panel fitting settings. On GEN9+ this means we need to update the crtc's
scaler settings.
This fixes the following WARN_ON, dur
Hi,
On 17-12-18 19:43, Rodrigo Vivi wrote:
On Mon, Dec 17, 2018 at 03:23:14PM +0100, Hans de Goede wrote:
Hi All,
As discussed a while ago, I would like to see us enable fastboot by
default, starting with Skylake / GEN9 and newer hardware, so that we can
avoid an unnecessary modeset at boot an
Den 30.11.2018 08.42, skrev Oleksandr Andrushchenko:
From: Oleksandr Andrushchenko
Use page directory based shared buffer implementation
now available as common code for Xen frontend drivers.
Remove flushing of shared buffer on page flip as this
workaround needs a proper fix.
Signed-off-by:
https://bugs.freedesktop.org/show_bug.cgi?id=107978
--- Comment #36 from Shmerl ---
(In reply to Jerry Zuo from comment #35)
> "startup monitor sleep regression". Please give more details on that. Thanks.
This behavior used to happen in the previous kernerls but got fixed at one
point. Now it's
On Tue, Dec 18, 2018 at 06:50:38PM +0530, Jayant Shekhar wrote:
> Remove unused functions from dpu plane interface
> and unused variables from dpu plane state structure.
>
> Signed-off-by: Jayant Shekhar
Reviewed-by: Jordan Crouse
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 27 ---
On Sun, Dec 16, 2018 at 08:02:46AM +0300, Alexander Shiyan wrote:
> Symbol BACKLIGHT_LCD_SUPPORT affecting anything, except enabling
> the backlight & LCD Kconfig menu. The patch removes this symbol as
> useless and converts it into a menu.
Something bothered me about the patch but I think its the
On Fri, Dec 14, 2018 at 03:16:39PM -0700, Jordan Crouse wrote:
> Add documentation for the interconnect and interconnect-names bindings
> for the GPU node as detailed by bindings/interconnect/interconnect.txt.
>
> Signed-off-by: Jordan Crouse
> ---
> Documentation/devicetree/bindings/display/msm
On Tue, Dec 18, 2018 at 11:22:01AM -0600, Rob Herring wrote:
> On Fri, Dec 14, 2018 at 03:16:39PM -0700, Jordan Crouse wrote:
> > Add documentation for the interconnect and interconnect-names bindings
> > for the GPU node as detailed by bindings/interconnect/interconnect.txt.
> >
> > Signed-off-by
On Tue, Dec 18, 2018 at 05:07:34PM +0100, Hans de Goede wrote:
> Hi,
>
> On 17-12-18 19:43, Rodrigo Vivi wrote:
> > On Mon, Dec 17, 2018 at 03:23:14PM +0100, Hans de Goede wrote:
> > > Hi All,
> > >
> > > As discussed a while ago, I would like to see us enable fastboot by
> > > default, starting
Prevents deadlock when fifo is full and reader closes file.
Signed-off-by: Kristian H. Kristensen
---
drivers/gpu/drm/msm/msm_rd.c | 7 ++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c
index b5672061ae085..d990b5f515
Each GPU core only uses one interrupt so we don't to look up
an interrupt by name and thereby we don't need interrupt-names.
Signed-off-by: Jordan Crouse
---
Documentation/devicetree/bindings/display/msm/gpu.txt | 1 -
1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings
Every GPU core only has one interrupt so there isn't any
value in looking up the interrupt by name. Remove the name (which
is legacy anyway) and use platform_get_irq() instead.
Signed-off-by: Jordan Crouse
---
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 1 -
drivers/gpu/drm/msm/msm_gpu.c
'interrupt-names' shouldn't be used in cases when there is only
one interrupt and it is not otherwise used in the driver.
Signed-off-by: Jordan Crouse
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
b/arch/arm64/
'interrupt-names' shouldn't be used in cases when there is only
one interrupt and it is not otherwise used in the driver.
Signed-off-by: Jordan Crouse
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi
b/arch/arm/boot/d
Now that more of the sdm845 bindings are headed upstream this a refresh of
of https://patchwork.freedesktop.org/series/39308/ to add bindings and nodes
for the GPU/GMU and GPU SMMU for sdm845. v7 of this patchset also removes
interrupt-names from the driver and the existing DT changes per feedback
Update the GPU bindings and document the new bindings for the GMU
device found with Adreno a6xx targets.
Signed-off-by: Jordan Crouse
---
v7: Updated the GMU compatible string and clarified details about when clocks
can be optional on the GPU
.../devicetree/bindings/display/msm/gmu.txt | 59
Add the nodes to describe the Adreno GPU and GMU devices.
Signed-off-by: Jordan Crouse
---
v7: Updated the GMU compatible string and removed interrupt-names
arch/arm64/boot/dts/qcom/sdm845.dtsi | 122 +++
1 file changed, 122 insertions(+)
diff --git a/arch/arm64/boot/d
Quoting Doug Anderson (2018-12-17 16:34:31)
> Hi,
>
> On Sun, Dec 16, 2018 at 11:06 PM Viresh Kumar wrote:
> >
> > +Rob +Stephen,
> >
> > On 14-12-18, 09:04, Doug Anderson wrote:
> > > Hi,
> > >
> > > On Thu, Dec 13, 2018 at 8:41 PM Viresh Kumar
> > > wrote:
> > > >
> > > > On 12-12-18, 14:18,
On 12/18/18 20:31, Boris Ostrovsky wrote:
On 12/18/18 11:15 AM, Noralf Trønnes wrote:
Den 30.11.2018 08.42, skrev Oleksandr Andrushchenko:
From: Oleksandr Andrushchenko
Use page directory based shared buffer implementation
now available as common code for Xen frontend drivers.
Remove flushi
Remove enum dpu_iommu_domain from dpu mdss as its unused.
Remove unnecessary comment for variable which is already
removed.
Signed-off-by: Jayant Shekhar
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 7 ---
1 file changed, 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_h
Hi,
On Tue, Dec 18, 2018 at 10:40 AM Stephen Boyd wrote:
>
> Quoting Doug Anderson (2018-12-17 16:34:31)
> > Hi,
> >
> > On Sun, Dec 16, 2018 at 11:06 PM Viresh Kumar
> > wrote:
> > >
> > > +Rob +Stephen,
> > >
> > > On 14-12-18, 09:04, Doug Anderson wrote:
> > > > Hi,
> > > >
> > > > On Thu, D
On Mon, Dec 17, 2018 at 06:09:47PM +, Emil Velikov wrote:
> On Tue, 11 Dec 2018 at 22:15, François Tigeot wrote:
> >
> > * There is no way to check if a device name is really a drm device
> > by looking it up in a virtual filesystem like on Linux
> >
> > * The major device number is also dyn
1 - 100 of 133 matches
Mail list logo
