Hi,
Did anything happen with this issue? I've updated linux kernel to 5.14.7
from 5.13 today, and I've been hit with a very similar problem (even
inside qemu), except in my case the height reported in "bad framebuffer
height" was twice the actual height, not three times. After some digging
ar
Hi,
On 2021-09-24 20:19, Thomas Zimmermann wrote:
Ask Nvidia.
I've tried nouveau in the meantime, but it takes over simpledrm (and
changes the screen resolution and turns on the secondary display), so
it's completely different. And it also works, at half the performance.
Any ideas what shoul
Hi,
thanks for the feedback.
Am 24.09.21 um 20:03 schrieb Zoltán Kővágó:
Hi,
Did anything happen with this issue? I've updated linux kernel to 5.14.7
from 5.13 today, and I've been hit with a very similar problem (even
inside qemu), except in my case the height reported in "bad framebuffer
Hi
On Thu, Aug 26, 2021, at 2:31 PM, Thomas Zimmermann wrote:
>
> You said that the resolution is 3840 x 2160, but the attached log says
> 1024x768. I guess that the former is the monitor's native resolution and
> the latter is the display mode?
>
Yes, that's the monitor native resolution and
Hi Amanoel
Am 25.08.21 um 21:12 schrieb Amanoel Dawod:
No problem, managed to boot directly into a text terminal and grabbed DRM
related dmesg log.
Hopefully it's what you're looking for :)
Find it attached please.
Thanks, this was helpful. The failure is shown at
[3.263394] [drm:0xfff
Hi
On Wed, Aug 25, 2021, at 2:02 PM, Thomas Zimmermann wrote:
>
> Oh, now simpledrm itself fills up the log with pointless messages. :/
> Looking at the file, there's plenty of Gnome buffer swapping. I suspect
> that Gnome works? It's just the console that's not available?
>
Yes, Gnome was wo
Hi
Am 25.08.21 um 18:01 schrieb Amanoel Dawod:
On Wed, Aug 25, 2021, at 8:56 AM, Thomas Zimmermann wrote:
In the attached log, the amdgpu driver is too noisy. Would it be
possible to disable the amdgpu and radeon drivers for this test? So only
simpledrm should be active. Likely this doesn't pro
Hi
Am 24.08.21 um 20:17 schrieb Amanoel Dawod:
Thanks for your reply.
This is on x86 platform. Specifically, Gigabyte B450i board with AMD Ryzen 3400G
(integrated graphics). Up to date bios version.
Resolution is 3840 x 2160.
Simpledrm is probably slow with this resolution, but that's an un
Hi
Am 24.08.21 um 00:42 schrieb Amanoel Dawod:
Hi,
This started since 5.14-rc1. The following error appears in dmesg
(as of 5.14-rc7) when I build the kernel with CONFIG_DRM_SIMPLEDRM=m
[3.252275] [drm] Initialized simpledrm 1.0.0 20200625 for
simple-framebuffer.0 on minor 0
[3.252298
Hi,
This started since 5.14-rc1. The following error appears in dmesg
(as of 5.14-rc7) when I build the kernel with CONFIG_DRM_SIMPLEDRM=m
[3.252275] [drm] Initialized simpledrm 1.0.0 20200625 for
simple-framebuffer.0 on minor 0
[3.252298] simple-framebuffer simple-framebuffer.0: [drm] *
10 matches
Mail list logo
