On Mon, Jan 28, 2013 at 3:56 AM, Mohammed, Afzal wrote:
> Hi Rob,
>
> On Fri, Jan 25, 2013 at 20:22:55, Rob Clark wrote:
>> On Fri, Jan 25, 2013 at 8:15 AM, Mohammed, Afzal wrote:
>
>> > It's not about being simple, but not doing the wrong way, here you are
>> > relying on a platform specific clo
Hi Rob,
On Fri, Jan 25, 2013 at 20:22:55, Rob Clark wrote:
> On Fri, Jan 25, 2013 at 8:15 AM, Mohammed, Afzal wrote:
> > It's not about being simple, but not doing the wrong way, here you are
> > relying on a platform specific clock in a driver, think about the case
> > where same IP is used on
On Mon, Jan 28, 2013 at 3:56 AM, Mohammed, Afzal wrote:
> Hi Rob,
>
> On Fri, Jan 25, 2013 at 20:22:55, Rob Clark wrote:
>> On Fri, Jan 25, 2013 at 8:15 AM, Mohammed, Afzal wrote:
>
>> > It's not about being simple, but not doing the wrong way, here you are
>> > relying on a platform specific clo
Hi Rob,
On Fri, Jan 25, 2013 at 20:22:55, Rob Clark wrote:
> On Fri, Jan 25, 2013 at 8:15 AM, Mohammed, Afzal wrote:
> > It's not about being simple, but not doing the wrong way, here you are
> > relying on a platform specific clock in a driver, think about the case
> > where same IP is used on
Hi Rob,
On Fri, Jan 25, 2013 at 19:29:40, Rob Clark wrote:
> On Fri, Jan 25, 2013 at 7:19 AM, Mohammed, Afzal wrote:
> > On Wed, Jan 23, 2013 at 04:06:22, Rob Clark wrote:
> >> A simple DRM/KMS driver for the TI LCD Controller found in various
> >> smaller TI parts (AM33xx, OMAPL138, etc). This
Hi Rob,
On Wed, Jan 23, 2013 at 04:06:22, Rob Clark wrote:
> A simple DRM/KMS driver for the TI LCD Controller found in various
> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
> +void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
> + /* in raster mode, minimum divisor is 2
On Fri, Jan 25, 2013 at 8:15 AM, Mohammed, Afzal wrote:
> Hi Rob,
>
> On Fri, Jan 25, 2013 at 19:29:40, Rob Clark wrote:
>> On Fri, Jan 25, 2013 at 7:19 AM, Mohammed, Afzal wrote:
>> > On Wed, Jan 23, 2013 at 04:06:22, Rob Clark wrote:
>
>> >> A simple DRM/KMS driver for the TI LCD Controller fou
On Fri, Jan 25, 2013 at 7:19 AM, Mohammed, Afzal wrote:
> Hi Rob,
>
> On Wed, Jan 23, 2013 at 04:06:22, Rob Clark wrote:
>
>> A simple DRM/KMS driver for the TI LCD Controller found in various
>> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
>
>> +void tilcdc_crtc_update_clk(stru
On Fri, Jan 25, 2013 at 8:15 AM, Mohammed, Afzal wrote:
> Hi Rob,
>
> On Fri, Jan 25, 2013 at 19:29:40, Rob Clark wrote:
>> On Fri, Jan 25, 2013 at 7:19 AM, Mohammed, Afzal wrote:
>> > On Wed, Jan 23, 2013 at 04:06:22, Rob Clark wrote:
>
>> >> A simple DRM/KMS driver for the TI LCD Controller fou
Hi Rob,
On Fri, Jan 25, 2013 at 19:29:40, Rob Clark wrote:
> On Fri, Jan 25, 2013 at 7:19 AM, Mohammed, Afzal wrote:
> > On Wed, Jan 23, 2013 at 04:06:22, Rob Clark wrote:
> >> A simple DRM/KMS driver for the TI LCD Controller found in various
> >> smaller TI parts (AM33xx, OMAPL138, etc). This
Hi Rob,
On Wed, Jan 23, 2013 at 04:06:22, Rob Clark wrote:
> A simple DRM/KMS driver for the TI LCD Controller found in various
> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
> +void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
> + /* in raster mode, minimum divisor is 2
On Fri, Jan 25, 2013 at 7:19 AM, Mohammed, Afzal wrote:
> Hi Rob,
>
> On Wed, Jan 23, 2013 at 04:06:22, Rob Clark wrote:
>
>> A simple DRM/KMS driver for the TI LCD Controller found in various
>> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
>
>> +void tilcdc_crtc_update_clk(stru
On Wed, Jan 23, 2013 at 07:24:33AM -0600, Rob Clark wrote:
> On Wed, Jan 23, 2013 at 3:42 AM, Jean-Francois Moine
> wrote:
> > Hi Rob,
> >
> > As I wanted to re-use your nxp-tda998x driver for the Marvell Dove SoC,
> > I had a look at your IT LCD driver. Comments below.
>
> Just fyi, you can re-
Hi Rob,
As I wanted to re-use your nxp-tda998x driver for the Marvell Dove SoC,
I had a look at your IT LCD driver. Comments below.
On Tue, 22 Jan 2013 16:36:22 -0600
Rob Clark wrote:
> A simple DRM/KMS driver for the TI LCD Controller found in various
> smaller TI parts (AM33xx, OMAPL138, etc)
Op 22 jan. 2013, om 23:36 heeft Rob Clark het volgende
geschreven:
> A simple DRM/KMS driver for the TI LCD Controller found in various
> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
> CMA helpers. Currently only the TFP410 DVI encoder is supported
> (tested with beaglebone
On Wed, Jan 23, 2013 at 8:13 AM, Rob Clark wrote:
> On Wed, Jan 23, 2013 at 7:36 AM, Russell King - ARM Linux
> wrote:
>> On Wed, Jan 23, 2013 at 07:24:33AM -0600, Rob Clark wrote:
>>> On Wed, Jan 23, 2013 at 3:42 AM, Jean-Francois Moine
>>> wrote:
>>> > Hi Rob,
>>> >
>>> > As I wanted to re-us
On Wed, Jan 23, 2013 at 7:36 AM, Russell King - ARM Linux
wrote:
> On Wed, Jan 23, 2013 at 07:24:33AM -0600, Rob Clark wrote:
>> On Wed, Jan 23, 2013 at 3:42 AM, Jean-Francois Moine
>> wrote:
>> > Hi Rob,
>> >
>> > As I wanted to re-use your nxp-tda998x driver for the Marvell Dove SoC,
>> > I ha
On Wed, Jan 23, 2013 at 3:42 AM, Jean-Francois Moine wrote:
> Hi Rob,
>
> As I wanted to re-use your nxp-tda998x driver for the Marvell Dove SoC,
> I had a look at your IT LCD driver. Comments below.
Just fyi, you can re-use the nxp-tda998x part independently of tilcdc
(just in case that wasn't c
On Wed, Jan 23, 2013 at 8:13 AM, Rob Clark wrote:
> On Wed, Jan 23, 2013 at 7:36 AM, Russell King - ARM Linux
> wrote:
>> On Wed, Jan 23, 2013 at 07:24:33AM -0600, Rob Clark wrote:
>>> On Wed, Jan 23, 2013 at 3:42 AM, Jean-Francois Moine
>>> wrote:
>>> > Hi Rob,
>>> >
>>> > As I wanted to re-us
On Wed, Jan 23, 2013 at 07:24:33AM -0600, Rob Clark wrote:
> On Wed, Jan 23, 2013 at 3:42 AM, Jean-Francois Moine wrote:
> > Hi Rob,
> >
> > As I wanted to re-use your nxp-tda998x driver for the Marvell Dove SoC,
> > I had a look at your IT LCD driver. Comments below.
>
> Just fyi, you can re-use
Hi Rob,
As I wanted to re-use your nxp-tda998x driver for the Marvell Dove SoC,
I had a look at your IT LCD driver. Comments below.
On Tue, 22 Jan 2013 16:36:22 -0600
Rob Clark wrote:
> A simple DRM/KMS driver for the TI LCD Controller found in various
> smaller TI parts (AM33xx, OMAPL138, etc)
Op 22 jan. 2013, om 23:36 heeft Rob Clark het volgende
geschreven:
> A simple DRM/KMS driver for the TI LCD Controller found in various
> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
> CMA helpers. Currently only the TFP410 DVI encoder is supported
> (tested with beaglebone
On Wed, Jan 23, 2013 at 7:36 AM, Russell King - ARM Linux
wrote:
> On Wed, Jan 23, 2013 at 07:24:33AM -0600, Rob Clark wrote:
>> On Wed, Jan 23, 2013 at 3:42 AM, Jean-Francois Moine wrote:
>> > Hi Rob,
>> >
>> > As I wanted to re-use your nxp-tda998x driver for the Marvell Dove SoC,
>> > I had a
On Wed, Jan 23, 2013 at 3:42 AM, Jean-Francois Moine wrote:
> Hi Rob,
>
> As I wanted to re-use your nxp-tda998x driver for the Marvell Dove SoC,
> I had a look at your IT LCD driver. Comments below.
Just fyi, you can re-use the nxp-tda998x part independently of tilcdc
(just in case that wasn't c
On Tue, Jan 22, 2013 at 04:36:22PM -0600, Rob Clark wrote:
> A simple DRM/KMS driver for the TI LCD Controller found in various
> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
> CMA helpers. Currently only the TFP410 DVI encoder is supported
> (tested with beaglebone + DVI cape).
A simple DRM/KMS driver for the TI LCD Controller found in various
smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
CMA helpers. Currently only the TFP410 DVI encoder is supported
(tested with beaglebone + DVI cape). There are also various LCD
displays, for which support can be add
On Tue, Jan 22, 2013 at 04:36:22PM -0600, Rob Clark wrote:
> A simple DRM/KMS driver for the TI LCD Controller found in various
> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
> CMA helpers. Currently only the TFP410 DVI encoder is supported
> (tested with beaglebone + DVI cape).
27 matches
Mail list logo