From: Mikita Lipski
Zero Port's PBN together with VCPI slots when releasing
allocated VCPI slots. That way when disabling the connector
it will not cause issues in drm_dp_mst_atomic_check verifying
branch bw limit.
Signed-off-by: Mikita Lipski
---
drivers/gpu/drm/drm_dp_mst_topology.c | 1 +
1
From: Mikita Lipski
[why]
Fix compilation warnings on i386 architecture:
undefined reference to `__udivdi3'
[how]
Switch DIV_ROUND_UP to DIV64_U64_ROUND_UP
Reported-by: Randy Dunlap
Signed-off-by: Mikita Lipski
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 2 +-
1 file cha
From: Mikita Lipski
[why]
Compilation error "undefined reference to `__udivdi3'" was
thrown on i386 architecture.
[how]
Use div_u64 for unsigned long division instead of a divide operator.
Reported-by: Randy Dunlap
Signed-off-by: Mikita Lipski
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu
From: Mikita Lipski
[why]
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.
[how]
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it an
From: David Francis
During MST mode enumeration, if a new dc_sink is created,
populate it with dsc caps as appropriate.
Use drm_dp_mst_dsc_aux_for_port to get the raw caps,
then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
Signed-of
From: David Francis
For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.
memset to 0 to avoid this
Reviewed-by: Nicholas Kazlauskas
Signed-off-by
From: David Francis
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.
As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual D
From: Mikita Lipski
[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stre
From: Mikita Lipski
Whenever a connector on an MST network is attached, detached, or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if tha
From: David Francis
If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network
Implement an algorithm to determine the correct DSC config
for each stream
The algorithm:
This
[ ] ( )
represents the range of b
From: Mikita Lipski
Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.
Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI sl
From: David Francis
Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.
This means that DRM drivers can make MST DPCD read/writes.
v2: Fix spacing
v3: Dump dpcd access on MST read/writes
v4: Fix call
From: David Francis
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.
The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)
That value is needed for FE
From: Mikita Lipski
[why]
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_
From: Mikita Lipski
[why]
For DSC case we cannot use topology manager's PBN divider
variable. The default divider does not take FEC into account.
Therefore the driver has to calculate its own divider based
on the link rate and lane count its handling, as it is hw specific.
[how]
Pass pbn_div as
From: Mikita Lipski
[why]
drm_dp_mst_atomic_check_topology_state() should be renamed
to reflect more specific type of check. Since it is verifying
payload allocation limit it should be renamed into
drm_dp_mst_atomic_check_vcpi_alloc_limit()
Cc: Lyude Paul
Signed-off-by: Mikita Lipski
---
driv
From: Mikita Lipski
[why]
Need to calculate VCPI slots differently for DSC
to take in account current link rate, link count
and FEC.
[how]
Add helper to get pbn_div from dc_link
Cc: Harry Wentland
Cc: Lyude Paul
Signed-off-by: Mikita Lipski
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst
From: Mikita Lipski
This set of patches is a continuation of DSC enablement
patches for AMDGPU. This set enables DSC on MST. It also
contains implementation of both encoder and connector
atomic check routines.
These patches have been introduced in multiple
iterations to the mailing list before.
From: Mikita Lipski
Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs. Add a new quirk to detect this case.
v2: Fix error when checking r
From: David Francis
With DSC, bpp can be fractional in multiples of 1/16.
Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel
v2: Don't add separate
From: David Francis
This field on drm_dp_mst_branch was never filled
It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.
v2: remember to decrement on port removal
v3: don't e
From: David Francis
Rework the dm_helpers_write_dsc_enable callback to
handle the MST case.
Use the cached dsc_aux field.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
Signed-off-by: Mikita Lipski
---
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 19 ++-
1 file cha
From: David Francis
With DSC, bpp can be fractional in multiples of 1/16.
Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel
v2: Don't add separate
From: Mikita Lipski
[why]
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.
[how]
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it an
From: Mikita Lipski
Whenever a connector on an MST network is attached, detached, or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if tha
From: David Francis
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.
As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual D
From: Mikita Lipski
[why]
Need to calculate VCPI slots differently for DSC
to take in account current link rate, link count
and FEC.
[how]
Add helper to get pbn_div from dc_link
Signed-off-by: Mikita Lipski
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 8
.../gpu/drm
From: Mikita Lipski
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_check
From: David Francis
If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network
Implement an algorithm to determine the correct DSC config
for each stream
The algorithm:
This
[ ] ( )
represents the range of b
From: Mikita Lipski
Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.
Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI sl
From: David Francis
Rework the dm_helpers_write_dsc_enable callback to
handle the MST case.
Use the cached dsc_aux field.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
Signed-off-by: Mikita Lipski
---
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 19 ++-
1 file cha
From: David Francis
For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.
memset to 0 to avoid this
Reviewed-by: Nicholas Kazlauskas
Signed-off-by
From: David Francis
During MST mode enumeration, if a new dc_sink is created,
populate it with dsc caps as appropriate.
Use drm_dp_mst_dsc_aux_for_port to get the raw caps,
then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
Signed-of
From: Mikita Lipski
[why]
For DSC case we cannot always use topology manager's PBN divider
variable. The default divider does not take FEC into account.
Therefore we should allow driver to calculate its own divider based
on the link rate and count its handling, as it is hw specific.
[how]
Pass pb
From: Mikita Lipski
Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs. Add a new quirk to detect this case.
Reviewed-by: Wenjing Liu
Rev
From: Mikita Lipski
[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stre
From: David Francis
Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.
This means that DRM drivers can make MST DPCD read/writes.
v2: Fix spacing
v3: Dump dpcd access on MST read/writes
v4: Fix call
From: Mikita Lipski
This set of patches is a continuation of DSC enablement
patches for AMDGPU. This set enables DSC on MST. It also
contains implementation of both encoder and connector
atomic check routines.
These patches have been introduced in multiple
iterations to the mailing list before.
From: David Francis
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.
The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)
That value is needed for FE
From: David Francis
This field on drm_dp_mst_branch was never filled
It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.
v2: remember to decrement on port removal
v3: don't e
From: David Francis
With DSC, bpp can be fractional in multiples of 1/16.
Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel
v2: Don't add separate
From: Mikita Lipski
We shouldn't compare int with unsigned long to find the max value
and since we are not expecting negative value returned from
compute_offset we should make this function return unsigned long
so we can compare the values when computing rc parameters.
v2: Modified function para
From: Mikita Lipski
We shouldn't compare int with unsigned long to find the max value
and since we are not expecting negative value returned from
compute_offset we should make this function return unsigned long
so we can compare the values when computing rc parameters.
Cc: Nikola Cornij
Cc: Har
From: David Francis
If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network
Implement an algorithm to determine the correct DSC config
for each stream
The algorithm:
This
[ ] ( )
represents the range of b
From: Mikita Lipski
[why]
For DSC case we cannot always use topology manager's PBN divider
variable. The default divider does not take FEC into account.
Therefore we should allow driver to calculate its own divider based
on the link rate and count its handling, as it is hw specific.
[how]
Pass pb
From: Mikita Lipski
Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.
Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI sl
From: Mikita Lipski
[why]
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.
[how]
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it an
From: Mikita Lipski
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_check
From: Mikita Lipski
Patches are based of amd-staging-drm-next, the follow up
set of patches will be sent for drm-tip
This set of patches is a continuation of DSC enablement
patches for AMDGPU. This set enables DSC on MST. It also
contains implementation of both encoder and connector
atomic check
From: David Francis
Rework the dm_helpers_write_dsc_enable callback to
handle the MST case.
Use the cached dsc_aux field.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
Signed-off-by: Mikita Lipski
---
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 19 ++-
1 file cha
From: David Francis
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.
The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)
That value is needed for FE
From: David Francis
With DSC, bpp can be fractional in multiples of 1/16.
Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel
v2: Don't add separate
From: Mikita Lipski
[why]
Need to calculate VCPI slots differently for DSC
to take in account current link rate, link count
and FEC.
[how]
Add helper to get pbn_div from dc_link
Signed-off-by: Mikita Lipski
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 8
.../gpu/drm
From: Mikita Lipski
Whenever a connector on an MST network is attached, detached, or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if tha
From: David Francis
This field on drm_dp_mst_branch was never filled
It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.
v2: remember to decrement on port removal
v3: don't e
From: David Francis
During MST mode enumeration, if a new dc_sink is created,
populate it with dsc caps as appropriate.
Use drm_dp_mst_dsc_aux_for_port to get the raw caps,
then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
Signed-of
From: David Francis
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.
As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual D
From: Mikita Lipski
Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs. Add a new quirk to detect this case.
Reviewed-by: Wenjing Liu
Rev
From: Mikita Lipski
[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stre
From: David Francis
For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.
memset to 0 to avoid this
Reviewed-by: Nicholas Kazlauskas
Signed-off-by
From: David Francis
Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.
This means that DRM drivers can make MST DPCD read/writes.
v2: Fix spacing
v3: Dump dpcd access on MST read/writes
v4: Fix call
From: David Francis
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.
As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual D
From: David Francis
If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network
Implement an algorithm to determine the correct DSC config
for each stream
The algorithm:
This
[ ] ( )
represents the range of b
From: Mikita Lipski
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it and calls drm_
From: David Francis
Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.
This means that DRM drivers can make MST DPCD read/writes.
v2: Fix spacing
v3: Dump dpcd access on MST read/writes
v4: Fix call
From: David Francis
With DSC, bpp can be fractional in multiples of 1/16.
Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel
v2: Don't add separate
From: David Francis
This field on drm_dp_mst_branch was never filled
It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.
v2: remember to decrement on port removal
v3: don't e
From: David Francis
Rework the dm_helpers_write_dsc_enable callback to
handle the MST case.
Use the cached dsc_aux field.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
---
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 19 ++-
1 file changed, 18 insertions(+), 1 dele
From: David Francis
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.
The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)
That value is needed for FE
From: David Francis
During MST mode enumeration, if a new dc_sink is created,
populate it with dsc caps as appropriate.
Use drm_dp_mst_dsc_aux_for_port to get the raw caps,
then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
---
.../
From: Mikita Lipski
Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.
Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI sl
From: Mikita Lipski
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_check
From: Mikita Lipski
Patches are based of amd-staging-drm-next, the follow up
set of patches will be sent for drm-tip
This set of patches is a continuation of DSC enablement
patches for AMDGPU. This set enables DSC on MST. It also
contains implementation of both encoder and connector
atomic check
From: David Francis
For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.
memset to 0 to avoid this
Reviewed-by: Nicholas Kazlauskas
Signed-off-by
From: Mikita Lipski
Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs. Add a new quirk to detect this case.
Reviewed-by: Wenjing Liu
Rev
From: David Francis
During MST mode enumeration, if a new dc_sink is created,
populate it with dsc caps as appropriate.
Use drm_dp_mst_dsc_aux_for_port to get the raw caps,
then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
---
.../
From: David Francis
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.
As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual D
From: Mikita Lipski
This set of patches is a continuation of DSC enablement
patches for AMDGPU. This set enables DSC on MST. It also
contains implementation of both encoder and connector
atomic check routines.
First 10 patches have been introduced in multiple
iterations to the mailing list befo
From: David Francis
If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network
Implement an algorithm to determine the correct DSC config
for each stream
The algorithm:
This
[ ] ( )
represents the range of b
From: David Francis
This field on drm_dp_mst_branch was never filled
It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.
v2: remember to decrement on port removal
v3: don't e
From: David Francis
Rework the dm_helpers_write_dsc_enable callback to
handle the MST case.
Use the cached dsc_aux field.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
---
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 19 ++-
1 file changed, 18 insertions(+), 1 dele
From: David Francis
For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.
memset to 0 to avoid this
Reviewed-by: Nicholas Kazlauskas
Signed-off-by
From: Mikita Lipski
Adding the following elements to add MST DSC support to DRM:
- dsc_enable boolean flag to drm_dp_vcpi_allocation structure to signal,
which port got DSC enabled
- function drm_dp_helper_update_vcpi_slots_for_dsc allows reallocation
of newly recalculated VCPI slots and raises
From: Mikita Lipski
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it and calls drm_
From: David Francis
Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.
This means that DRM drivers can make MST DPCD read/writes.
v2: Fix spacing
v3: Dump dpcd access on MST read/writes
v4: Fix call
From: David Francis
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.
The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)
That value is needed for FE
From: Mikita Lipski
Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs. Add a new quirk to detect this case.
Reviewed-by: Wenjing Liu
Rev
From: Mikita Lipski
- Adding encoder atomic check to find vcpi slots for a connector
- Using DRM helper functions to calculate PBN
- Adding connector atomic check to release vcpi slots if connector
loses CRTC
- Calculate PBN and VCPI slots only once during atomic
check and store them on crtc_sta
From: David Francis
With DSC, bpp can be fractional in multiples of 1/16.
Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel
v2: Don't add separate
From: David Francis
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.
As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual D
From: David Francis
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.
The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)
That value is needed for FE
From: Mikita Lipski
Adding the following elements to add MST DSC support to DRM:
- dsc_enable boolean flag to drm_dp_vcpi_allocation structure to signal,
which port got DSC enabled
- function drm_dp_helper_update_vcpi_slots_for_dsc allows reallocation
of newly recalculated VCPI slots and raises
From: David Francis
If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network
Implement an algorithm to determine the correct DSC config
for each stream
The algorithm:
This
[ ] ( )
represents the range of b
From: David Francis
This field on drm_dp_mst_branch was never filled
It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.
v2: remember to decrement on port removal
v3: don't e
From: Mikita Lipski
- Adding encoder atomic check to find vcpi slots for a connector
- Using DRM helper functions to calculate PBN
- Adding connector atomic check to release vcpi slots if connector
loses CRTC
- Calculate PBN and VCPI slots only once during atomic
check and store them on crtc_sta
From: David Francis
During MST mode enumeration, if a new dc_sink is created,
populate it with dsc caps as appropriate.
Use drm_dp_mst_dsc_aux_for_port to get the raw caps,
then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
---
.../
From: David Francis
Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.
This means that DRM drivers can make MST DPCD read/writes.
v2: Fix spacing
v3: Dump dpcd access on MST read/writes
v4: Fix call
From: David Francis
For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.
memset to 0 to avoid this
Reviewed-by: Nicholas Kazlauskas
Signed-off-by
From: Mikita Lipski
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it and calls drm_
From: David Francis
Rework the dm_helpers_write_dsc_enable callback to
handle the MST case.
Use the cached dsc_aux field.
Reviewed-by: Wenjing Liu
Signed-off-by: David Francis
---
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 19 ++-
1 file changed, 18 insertions(+), 1 dele
1 - 100 of 135 matches
Mail list logo
