On Sat, Feb 16, 2019 at 12:43 PM Sam Ravnborg wrote:
>
> Hi Vasily.
Hi Sam,
> On Thu, Feb 14, 2019 at 09:09:54PM -0800, Vasily Khoruzhick via dri-devel
> wrote:
> > This commit adds support for the BOE HB140WX1-501 14" WXGA TFT LCD
> > panel.
> >
&
On Fri, Feb 15, 2019 at 12:23 AM Priit Laes wrote:
> > + err = anx6345_tx_initialization(anx6345);
> > + if (err) {
> > + DRM_ERROR("Failed transmitter initialization: %d\n", err);
> > + goto err_poweroff;
>
> You can move the whole err_poweroff section from below
On Fri, Feb 15, 2019 at 1:13 AM Andrzej Hajda wrote:
Hi Andrzej,
Thanks for review!
> > +#include
> Do you need this header?
I'll drop it.
> > +#include
>
> drmP.h is/should be deprecated.
Same here
> > +struct anx6345_platform_data {
> > + struct regulator *dvdd12;
> > + struct r
Add vendor prefix for Guangdong Neweast Optoelectronics CO. LTD
Signed-off-by: Vasily Khoruzhick
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt
b/Documentation/devicetree/binding
From: Icenowy Zheng
Some definitions currently in analogix-anx78xx.h are not restricted to
the ANX78xx series, but also applicable to other DisplayPort
transmitters by Analogix.
Split out them to dedicated headers, and make analogix-anx78xx.h include
them.
Signed-off-by: Icenowy Zheng
Signed-o
This commit adds support for the BOE HB140WX1-501 14" WXGA TFT LCD
panel.
Signed-off-by: Vasily Khoruzhick
---
.../display/panel/boe,hb140wx1-501.txt| 7 +
drivers/gpu/drm/panel/panel-simple.c | 26 +++
2 files changed, 33 insertions(+)
create mode 100644
From: Icenowy Zheng
As ANA78xx chips are designed and produced by Analogix Semiconductor,
Inc, move their driver codes into analogix subdirectory.
Signed-off-by: Icenowy Zheng
Signed-off-by: Vasily Khoruzhick
Reviewed-by: Laurent Pinchart
---
drivers/gpu/drm/bridge/Kconfig
From: Icenowy Zheng
Allwinner A64's TCON0 can output RGB666 LCD signal.
Add its pinmux.
Signed-off-by: Icenowy Zheng
Signed-off-by: Vasily Khoruzhick
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/s
This patchset brings support for Analogix ANX6345 RGB-(e)DP bridge, which
is used by some Allwinner A64 laptops, such as Pinebook and Olimex
TERES-I.
It reuses some definitions from ANX78xx driver that already exists in the
kernel tree, but the driver code itself is rewritten due to significant
di
On Thu, Feb 14, 2019 at 12:38 PM Rob Herring wrote:
>
> On Thu, Feb 14, 2019 at 2:04 PM Vasily Khoruzhick wrote:
> >
> > On Tue, Feb 5, 2019 at 2:24 AM Thierry Reding
> > wrote:
> > >
> > > On Tue, Feb 05, 2019 at 09:57:37AM +0100, Daniel Vetter wrote:
> > > > On Mon, Feb 04, 2019 at 05:22:58PM
From: Icenowy Zheng
The ANX6345 is an ultra-low power DisplayPower/eDP transmitter designed
for portable devices. This driver adds initial support for RGB to eDP
mode, without HPD and interrupts.
This is a configuration usually seen in eDP applications.
Signed-off-by: Icenowy Zheng
Signed-off-
This commit adds support for the NewEast Optoelectronics CO., LTD
WJFH116008A 11.6" 1920x1080 TFT LCD panel.
Signed-off-by: Vasily Khoruzhick
---
.../display/panel/neweast,wjfh116008a.txt | 7
drivers/gpu/drm/panel/panel-simple.c | 39 +++
2 files changed, 46 i
From: Icenowy Zheng
The ANX6345 is an ultra-low power DisplayPort/eDP transmitter designed
for portable devices.
Add a binding document for it.
Signed-off-by: Icenowy Zheng
Signed-off-by: Vasily Khoruzhick
---
.../bindings/display/bridge/anx6345.txt | 56 +++
1 file cha
From: Icenowy Zheng
Some code can be shared within different DP bridges by Analogix.
Extract them to a new module.
Signed-off-by: Icenowy Zheng
Signed-off-by: Vasily Khoruzhick
---
drivers/gpu/drm/bridge/analogix/Kconfig | 4 +
drivers/gpu/drm/bridge/analogix/Makefile | 2 +
.
Clock rate check that was added in commit bb43d40d7c83 ("drm/sun4i: rgb:
Validate the clock rate") prevents some panel and bridges from working with
sun4i driver.
Unfortunately, dotclock frequency for some modes are not achievable on
sunxi hardware, and there's a slight deviation in rate returned
From: Icenowy Zheng
Pinebook has an ANX6345 bridge connected to the RGB666 LCD output and
eDP panel input. The bridge is controlled via I2C that's connected to
R_I2C bus.
There're pinebooks with 3 different panels in the wild, all 3 with
different timings. Add all the compatibles to panel node a
On Tue, Feb 5, 2019 at 8:36 AM Daniel Vetter wrote:
>
> On Tue, Feb 05, 2019 at 11:24:19AM +0100, Thierry Reding wrote:
> > On Tue, Feb 05, 2019 at 09:57:37AM +0100, Daniel Vetter wrote:
> > > On Mon, Feb 04, 2019 at 05:22:58PM +0100, Thierry Reding wrote:
> > > > On Mon, Feb 04, 2019 at 04:59:09P
On Tue, Feb 5, 2019 at 2:24 AM Thierry Reding wrote:
>
> On Tue, Feb 05, 2019 at 09:57:37AM +0100, Daniel Vetter wrote:
> > On Mon, Feb 04, 2019 at 05:22:58PM +0100, Thierry Reding wrote:
> > > On Mon, Feb 04, 2019 at 04:59:09PM +0100, Daniel Vetter wrote:
> > > > On Mon, Feb 04, 2019 at 12:22:18P
18 matches
Mail list logo
