On 12/4/2018 10:40 AM, Joan Moreau via dovecot wrote:
In the Wiki, ( https://wiki.dovecot.org/Plugins/FTS/Solr ), it would
nice to stipulate to the reader to type the command :
sudo -u solr /opt/solr/bin/solr create -c dovecot # to create the
dovecot instance
before updating the schema.xm
1"
catenateAll="1"/>
maxGramSize="15" />
protected="protwords.txt"/>
ignoreCase="true" synonyms="synonyms.txt"/>
ignoreCase="true"/>
generateWordParts="1" generateNumberParts="1" splitOnCaseChange="
On 12/10/2018 10:02 PM, Joan Moreau wrote:
Additionally, here the errors I get in logs:
Dovecot:
Dec 09 09:21:09 imap(j...@grosjo.net)<3349>: Error:
fts_solr: received invalid uid '0'
Dec 09 09:21:10 imap(j...@grosjo.net)<3349>: Error:
fts_solr: received invalid uid '0'
or
11 03:36:03
in
On 12/11/2018 4:46 AM, Joan Moreau via dovecot wrote:
I shared the errors already so many times (check this mailinling for
"solr" in teh title)
Contrary to what you say, with SOlr 7.5 and Dovecot git, I had to
remove the "managed-schema" to make solr respond a bit properly. It
relies on sc
;/>
stored="true"/>
stored="true"/>
On 2018-12-15 20:54, Joan Moreau wrote:
Daniel,
I have done that so any times (deleteing the data folders, recreating
the instance, restarting etc...)
But this is really not the issue
The issue is
1 - fts_solr reports erro
As a LetsEncrypt user myself, I have:
ssl_cert = So nothing further should be required. You say Dovecot fails to start -
have you tried simply executing "dovecot -F"?
Daniel
On 12/16/2018 6:19 AM, C. Andrews Lavarre wrote:
Phil hi.
Thank you for explaining what the symbol does... so it is
Don't know if this was corrected in 2.3.4 (haven't upgraded yet but
didn't see it in the notes) - but in 2.3.3 I see this in my log:
imap-login: Error: Diffie-Hellman key exchange requested, but no DH
parameters provided. Set ssh_dh=
So...either there's an undocumented feature of SSH-over-IMAP
I found an error in my log today...
Dec 17 12:03:30 bubba dovecot:
imap(us...@amfes.com)<23017>: Error: fts_solr:
received invalid uid '0'
Dec 17 12:04:44 bubba dovecot:
imap(us...@amfes.com)<25004>: Fatal: master:
service(imap): child 25004 killed with signal 11 (core dumps disabled -
https
I tried SIS a couple years ago - I was very excited with the resulting
decrease in storage requirements but the undiagnosed intermittent issues
became too significant to ignore so I switched away. Recently I was
thinking about it again.
The primary issue with SIS seemed to be links would be d
why going for SOlr, how to have a
working (i.e. getting the right results to the end user) setup ?
(3) If there iare no tangible reason, what about maintaining fts_squat
, which did the job nicely for years and no complains about.
On 2018-12-16 08:51, Daniel Miller via dovecot wrote:
Joan
Ubuntu 18.04, AMD Opteron, Dovecot Version 2.3.3, local file storage. I
believe it's one of my users checking mail remotely via mobile - don't
remember if it's an iPhone or Android.
gdb backtrace:
Reading symbols from /usr/local/libexec/dovecot/imap...done.
[New LWP 13852]
[Thread debugging us
On 12/26/2018 1:32 AM, Aki Tuomi wrote:
On 26 December 2018 at 11:26 Daniel Miller via dovecot
wrote:
Ubuntu 18.04, AMD Opteron, Dovecot Version 2.3.3, local file storage. I
believe it's one of my users checking mail remotely via mobile - don't
remember if it's an iPhone o
On 12/29/2018 4:46 PM, Joan Moreau wrote:
Hi Daniel,
I am on Archlinux. Anyway, I adapted the scripts.
2 questions:
1 - It looks like we are not on the same version . I am on 7.5.0.
Which version are you running ?
Solr 7.5.0.
2 - Your conf shows that you let managed-schema but deleted
On 12/29/2018 4:49 PM, Joan Moreau wrote:
Also :
- Java is 10.0.2
Same as me.
- If i delete schema.xml but create only managed-schema, the solr
refuses to start with a java error "schema.xml missing"
Ok...so we need to do some more digging.
How did you install Solr? (I downloaded a "bi
I'm running 7.5.0. The solrconfig.xml file is what I've modified over
time - I haven't started one from scratch for a while but perhaps I'll try.
Have you tried using the complete config that I sent you? With *all*
the files I included - and *none* of yours?
--
Daniel
On 1/1/2019 4:12 PM,
On 1/2/2019 12:59 AM, M. Balridge wrote:
So, without rancour or antipathy, I ask the entire list: has ANYONE gotten a
Dovecot/solr-fts-plugin setup to work that provides as a BASELINE, all of the
following functionality:
1) The ability to search for a string within any of the structured fields
(
On 1/1/2019 3:49 PM, Joan Moreau via dovecot wrote:
Hi
Solr is a standard package in ArchLinux. ("pacman -S solr") . the
systemd installation script is included (and it is launching
/opt/solr/bin/solr.in.sh)
Instance : sudo -u solr /opt/solr/bin/solr create -c dovecot -> this
creates a sep
On 1/3/2019 10:56 AM, Tanstaafl wrote:
On 12/21/2018, 11:19:42 AM, Daniel Miller via dovecot
wrote:
There is a *huge* difference between a functional Solr setup & squat
Interesting. Care to elaborate?
This is one of those things that has to be experienced to be
understood. When you
On 1/5/2019 9:58 AM, Tanstaafl wrote:
Thanks Daniel...
So, as one who has no experience of the benefit of either...
How does this compare with Squat? Meaning, Is it exponentially faster?
Twice as fast?
It's been many years since I last had a Squat setup - but that's my memory.
--
Daniel
On 1/25/2019 1:33 PM, ash-dove...@comtek.co.uk wrote:
We will be deploying a replacement Dovecot server soon, and we are
planning to use maildir for the primary storage, but with an archive
namespace using mdbox (or perhaps sdbox), and SIS.
Our backup servers and (luke)warm spare server nee
On 1/29/2019 9:15 AM, Tomasz Nowak wrote:
Hello,
I'm trying to experiment with Dovecot and Solr server.
I have >30k email addresses that I want to index to speed up searching
and save IOPS on mail servers.
For now - I'm doing some experiments and I'm testing how it is
working. I'm thinking abo
On 4/23/2019 1:53 AM, luckydog xf via dovecot wrote:
Hi, I use sis to deduplicate attachments, here is my `doveconf -n`
[...]
mail_location = maildir:/var/mail/%n/Maildir
[...]
SIS is a function of dbox. You're using Maildir.
--
Daniel
On April 23, 2019 10:54:38 PM luckydog xf wrote:
Is it worthwile to use dbox? seeing from
http://www.linuxmail.info/mbox-maildir-mail-storage-formats/ it may cause
file lock and easy to corrupt.
As with everything - it depends. You're asking me so these are *my*
opinions - and I do not claim t
On 4/30/2019 11:13 PM, MRob via dovecot wrote:
The examples in 15-mailboxes.conf
# If you have a virtual "All messages" mailbox:
#mailbox virtual/All {
# special_use = \All
# comment = All my messages
#}
# If you have a virtual "Flagged" mailbox:
#mailbox virtual/Flagged {
On 5/2/2019 12:47 PM, MRob via dovecot wrote:
hi, I spent time learning about virtual mailboxes. Is there some way to
create dynamic virtual mailboxes? I mean, when I look at a mailbox, I
want to see only unread messages or flagged messages in that mailbox.
contents of /var/mail/mydomain/myuse
On 5/3/2019 11:18 AM, MRob via dovecot wrote:>
Thank you, but question is about the example mailbox settings in
15-mailboxes.conf
I found I can put those mailbox definitions in the new virtual
namespace, still not sure if they would work if I kept them in the inbox
namespace, maybe the document
On 5/3/2019 11:22 AM, MRob via dovecot wrote:> That is not dynamically
generated and it isn't limited to just one
mailbox (dovecot terminology here is confusing, normally a mailbox is a
mail account (user), but in this context "mailbox" I guess mean "folder"
which is how I am using it, as it is
On 5/5/2019 10:50 PM, MRob via dovecot wrote:>
Thank you for helping but-
Again, Dovecot terminology here, mailbox means 'folder' not the whole
account
Dynamic-
https://www.mail-archive.com/dovecot@dovecot.org/msg71091.html
Ahh...I understand what you want now. Yes it would be nice - no tha
For my primary namespace this is working fine - thanks to the developers!
It also appears to work great for shared folders as well.
But my virtual folders aren't returning results - at least not to the
client. The logs show FTS Xapian opening several DB files and getting
results - but nothing
comparator-i;ascii-numeric relational regex imap4flags
copy include variables body enotify environment mailbox date index ihave
duplicate mime foreverypart extracttext
namespace inbox {
hidden = no
inbox = yes
list = yes
location =
mailbox "Deleted Messages" {
auto = no
e:
Hi
Are you using the latest git version ?
WHich part exactly of your logs relates to "virtual folders do not work" ?
On 2019-06-05 13:08, Daniel Miller via dovecot wrote:
Logs:
Jun 5 06:02:25 bubba dovecot:
imap(dmil...@amfes.com)<25877>: Opening DB (RO)
/var/mail/amfe
On 7/9/2019 6:17 AM, Jérôme Bardot via dovecot wrote:
Hello,
This is my first email here.
I want to understand well how dovecot is integrate with ldap in a
postfix/dovecot/ldap setup.
I use a debian server.
Perfectly!
More specifically what dovecot need in ldap to work.
I saw we can use s
Is the following "legal" for Dovecot? And...is this separation
recommended or a bad idea? Particularly I'm asking about the "archives"
namespace - I haven't actually implemented this yet and I'm checking
before I break something.
10-mail.conf
# Primary private namespace
# Using sdbox for stor
It's quite likely I'm doing it wrong, but...
Given a valid mailbox...
doveadm mailbox list -u realmb
returns "realmb"
doveadm mailbox list -u real*
returns "realmb"
Seems reasonable. Now, with a non-existent mailbox...
doveadm mailbox list -u bogus
returns "bogus"
d
On 9/13/2019 1:21 AM, Fabian via dovecot wrote:
Hi,
we are trying to add full text search functionality with Solr to our Doveoct
setup. Our Versions:
OS: Debian 9
Tried versions:
- Dovecot 2.2.7 with Solr 3.6
- Dovecot 2.3.4 with Solr 8.2
(2.2.7 from offical Debian repository, 2.3.4 from backpo
Given an existing default namespace:
namespace inbox {
type = private
separator = /
prefix =
location = sdbox:/var/mail/%d/%n/sdbox
inbox = yes
hidden = no
list = yes
subscriptions = yes
}
And mailboxes like:
INBOX
INBOX/Archives
INBOX/Archives/2018
if I then define a new namesp
On 9/17/2019 12:58 AM, Marc Roos via dovecot wrote:
I have been testing with imaptest and getting 'stalls', I tried even
building from source and static. Even running it on the same host.
Anyone knows what I could doing wrong?
[@~]# ./imaptest - append=100,0 logout=0 host=192.168.10.44 port=143
If you're just speed testing for writing probably sdbox or maildir would
be the fastest.
Daniel
On 9/17/2019 1:09 PM, Marc Roos via dovecot wrote:
Yes dovecot is showing the inserted messages until the stall. Looks like
it is an issue with imap test because I am able to empty the mailbox
agai
On 9/19/2019 6:28 AM, Fabian via dovecot wrote:
Thanks for your response! No we are not limiting Soli’s memory usage. After your tip, we've
also upgraded the memory to 32GB. But the behavior remains the same. I have also already
considered that Dovecot may index the UID incorrectly. But if I s
Not defending Thunderbird - but I don't understand your "taking hours to
load my Dovecot IMAP". I suppose if you have sync enabled then the first
time you connect to a large mailstore there would be an initial
download. But...I always disable sync immediately upon setting up
accounts in Thunder
On 10/9/2019 6:58 PM, @lbutlr via dovecot wrote:
On Oct 9, 2019, at 5:23 PM, @lbutlr wrote:
Postfix logs "Client host rejected: Access denied” but as I said, other
accounts can submit and there’s nothing special in the submission service in
master.cf.
submission inet n - n
In conf.d/10-logging.conf, set:
auth_debug_passwords = yes
mail_debug = yes
verbose_ssl = yes
You might try setting them one-by-one as having all three will give a
ton of info, and auth_debug_passwords will expose all passwords used
while set, but those settings should show you what the proble
The current documentation makes mention of a "special" subscription
namespace. The example given:
namespace subscriptions {
subscriptions = yes
prefix = ""
list = no
hidden = yes
}
namespace inbox {
inbox = yes
location =
subscriptions = no
[...]
results in a startup error as bot
I've been hunting some ghost mailboxes - and I *think* I found the source.
I use the complete email address as the username, and store such in a
database. The storage structure is location=/var/mail/%d/%n. Not unusual
I think.
So all I *should* see from "ls /var/mail" would be a list of domai
There is some ambiguity in the setting names, however:
In the "upper" authentication config file (possibly
conf.d/auth-sql.conf.ext) you define which "internal" driver the
authentication system will use. These are...more of a top-level engine
selection if you will - perhaps not what you'd cons
On 11/13/2019 11:59 PM, Thomas Güttler via dovecot wrote:
Am 13.11.19 um 17:21 schrieb Ralph Seichter via dovecot:
* Thomas Güttler via dovecot:
AFAIK you can't sent a link/URL to a mail on a shared folder to a friend.
Like "Hi bob, she loves me. See this message from here https:/./"
R
I only allow explicit service traffic through. IMAPS, SMTPS, etc. If
doveadm is communicating via the IMAP(S) ports then all I can do via
firewall is block countries. Which of course I can but I'm asking about any
additional hardening for Dovecot itself.
--
Daniel
On May 13, 2023 6:25:06 PM je
47 matches
Mail list logo
