Again?
Well i just use a simple text editor
On May 15, 2012 2:53 PM, "Harold.Miao" wrote:
> it is not a free sw
>
> 2012/5/15 Ezequiel Bertti
>
>> 10x pycharm...
>>
>> the best one...
>>
>> the only one made to work with python and django...
>>
>>
>> On Tue, May 15, 2012 at 12:28 AM, Rivsen wr
You will want to have a lawyer advise you on your agreements. Although your
drafting is pretty tight, it could be a bit tighter, and there are certain
legal issues that arise, such as how a "project" can own anything (such as
copyrights). You'll likely want a jurisdiction and choice-of-law clause a
PyCharm. Spend the $$, its worth it.
On Tue, May 15, 2012 at 10:13 AM, Phang Mulianto wrote:
> Again?
>
> Well i just use a simple text editor
> On May 15, 2012 2:53 PM, "Harold.Miao" wrote:
>
>> it is not a free sw
>>
>> 2012/5/15 Ezequiel Bertti
>>
>>> 10x pycharm...
>>>
>>> the best one...
You might want to look into using South http://south.aeracode.org/
At first i thought it was cool, then I needed to alter a table with
important data on it, and that's when I saw it's usefulness.
On Tue, May 15, 2012 at 9:52 AM, kenneth gonsalves
wrote:
> On Mon, 2012-05-14 at 09:06 -0700, don
You would configure the FTP daemon to allow that, yes. I use rsync or scp
and make sure the user I'm SSH-ing as has RW permissions on the desired
folder.
On Tue, May 15, 2012 at 9:00 AM, doniyor wrote:
> Hi Nik, thanks for help, but look, is it possible to configure the
> httpd.conf or anything
On May 15, 2:31 am, Nikolas Stevenson-Molnar
wrote:
> You could also log the whole stack trace using the traceback
> module:http://docs.python.org/library/traceback.html
Or just use logging.exception, that takes care of all the gory details
in a single and simple call:
try:
foo = bar.baaz()
On May 15, 1:29 am, LJ wrote:
> I am trying to add exception handling to my application.
> I have been reading the documentation on Django
> Exceptions:https://docs.djangoproject.com/en/dev/ref/exceptions/
> I also found the list of Exceptions (both Django and Python).
> But for testing purposes,
Pycharm
2012/5/14 Sanjay M
> I am new to Django, and I was confused in choosing a IDE between Eclipse
> and aptana studio 3 to edit source code. Kindly suggest me a good one.
>
> Thank you in advance,
> Regards,
> Sanjay M
>
>
> --
> You received this message because you are subscribed to the G
ulipad , free and build with wxpython
2012/5/14 Sanjay M
> I am new to Django, and I was confused in choosing a IDE between Eclipse
> and aptana studio 3 to edit source code. Kindly suggest me a good one.
>
> Thank you in advance,
> Regards,
> Sanjay M
>
>
> --
> You received this message beca
I use Vim, for everything involving writing -- coding, producing
papers/articles/reports, editing existing code and documents. It is not an
IDE, but a text editor, and it is absolutely excellent. Once you learn Vim,
you'll never want to use anything else (this is the case for me, at least).
The lea
okay thanks, but what about just pulling from repo instead of using ftp ?
is it also a solution for this?
Am Dienstag, 15. Mai 2012 10:53:32 UTC+2 schrieb @timkofu:
>
> You would configure the FTP daemon to allow that, yes. I use rsync or scp
> and make sure the user I'm SSH-ing as has RW per
sorry for bad advice.. i thought i could work,,
Am Dienstag, 15. Mai 2012 08:52:35 UTC+2 schrieb lawgon:
>
> On Mon, 2012-05-14 at 09:06 -0700, doniyor wrote:
> > delete your app from INSTALLED_APPS and syncdb, AND list it again in
> > INSTALLED_APPS and syncdb again..
> >
> > if it doesnot w
I had a look at fagungis, but it didn't seem to be addressing the
issue. I didn't give much detail before, so that's not a surprise. :-)
So:
Stage 1: person X develops an open source Django app.
Stage 2: person X makes the app sources available somewhere (say,
github).
Stage 3: person Y retriev
ajax is not that different from dajax.. actually almost same logic.. but
look, i try to explain how it should work..
your index.html
click me
and your ajaxfunction in the head of this index.html is this.
function ajaxfunction(){
wanted_value = $("input[name='wanted_value']").val();
$.ajax({
Does anyone tried to store only Base64 info in databse of an image
instead of a file with django image field ?
Do you have any idea how to do it ?
Or some hints to give me ?
regards and thanks
Bussiere
"Les nouvelles technologies offrent pleins de nouvelles possibilités,
pleins de possibilité
Hi
I had similar situation where a textfield (which was made a markup editor
by applying css and all) was given where people come in write anything and
discuss about their topics; you can imagine like a forum.
So i made some regular expressions to allow videos to show in an iframe and
image to ope
On 15/05/2012 6:23pm, Marcin Tustin wrote:
You will want to have a lawyer advise you on your agreements. Although
your drafting is pretty tight, it could be a bit tighter,
I'd like to strike a decent balance. My own lawyer is a tad aggressive
and to be honest I wouldn't sign anything he wrote
Hi Am, thank you so much for the explanation. It is very helpful! And thank
you for the idea of using ajax for my problem. I used dajax and it is
working nicely!
On Tuesday, May 15, 2012 6:37:12 AM UTC-5, doniyor wrote:
>
> ajax is not that different from dajax.. actually almost same logic.. b
Thanks for all the advice, I appreciate it.
On Tue, May 15, 2012 at 3:22 AM, doniyor wrote:
> sorry for bad advice.. i thought i could work,,
>
> Am Dienstag, 15. Mai 2012 08:52:35 UTC+2 schrieb lawgon:
>
>> On Mon, 2012-05-14 at 09:06 -0700, doniyor wrote:
>> > delete your app from INSTALLED_AP
Hi,
maybe you could use http://djangosnippets.org/snippets/1669/
Greetings
Am Dienstag, den 15.05.2012, 17:36 +0530 schrieb Nikhil Verma:
> Hi
>
> I had similar situation where a textfield (which was made a markup
> editor by applying css and all) was given where people come in write
> anything
Andrew,
What bothers me is that the redirection setup works perfectly for any value
of "anything" or querystring; it only fails for this specific case.
How is that possible?
Thanks again
On Mon, May 14, 2012 at 7:10 PM, Andrew Bruce wrote:
> You have passed 'anything' as a keyword argument th
Dear Russell,
thank you very much for your reply, with all the background info and
details! It was very helpful!
:-D
Best regards,
Carsten
Am 15.05.2012 01:45, schrieb Russell Keith-Magee:
On Tue, May 15, 2012 at 1:20 AM, Carsten Fuchs wrote:
Dear Django group,
I've never worked with h
Hi
This is how my middleware is currently ordered:
'django.middleware.cache.UpdateCacheMiddleware',
'django.middleware.gzip.GZipMiddleware',
'django.contrib.sessions.middleware.SessionMiddleware',
'django.middleware.common.CommonMiddleware',
'django.middleware.csrf.CsrfViewMid
I don't know, but the revision middleware smells like it could be the
culprit. It is the last module in processing the request, and the first one
processing the response back up the chain. Maybe it is returning the old
data. Just a stab in the dark.
Furbee
On Tue, May 15, 2012 at 8:23 AM, David
Hello all!
I'm following James Bennett's book Practical Django Projects, and I've got
stuck at page 65 Chapter 4. On that page, there is an instruction to add an
entry through the models created and added to admin interface under
"Entries". I can populate the fields through the add link, but when
I want to create a virtualenv pip, but I don't know how to Install
virtualenv by running pip install virtualenv? Can anyone explain how to
setup a virtualenv?
Thanks in advance,
-Regards,
Sanjay M
--
You received this message because you are subscribed to the Google Groups
"Django users" gr
Have you checked your database to see that the field actually exists. If
you've added excerpt_html since you ran python manage.py syncdb you won't
have the field in the table. You would either need to use South to include
it, add it by hand to the table, or delete the table and run python
manage.py
I usually keep the configuration files and the statics in a separate
process (manual in case of small number of deploys)
Eugenio
Il giorno 15/mag/2012 13:32, "Steve Kilbane"
ha scritto:
> I had a look at fagungis, but it didn't seem to be addressing the
> issue. I didn't give much detail before,
1. install python if you don't have one;
2. download easy_install, and install it;
3. install pip through easy_install;
4. install virtualenv through pip, by using "pip install virtualenv; pip
install virtualenvwrapper "
5. mkdir ~/.virtualenv ,in .bash_profile “export
WORKON_H
Actually i wanna deploy front end user interface with django for network
interface projectpls help me to get this
On Tue, May 15, 2012 at 1:41 AM, Dennis Lee Bieber wrote:
> On Mon, 14 May 2012 20:30:33 +0530, Tanveer Ali Sha
> declaimed the following in
> gmane.comp.python.django.user:
>
>
I use PyCharm, it's a very good IDE, you can download and try first.
On Monday, May 14, 2012, Sanjay M wrote:
> I am new to Django, and I was confused in choosing a IDE between Eclipse
> and aptana studio 3 to edit source code. Kindly suggest me a good one.
>
> Thank you in advance,
> Regards,
>
Which platform?
I mostly do Linux. If you don't then the instructions for distribute
and pip on pypi may need modification (e.g.; if you don't have curl).
Assuming the python you wish to use is already installed, and the old
easy_install isn't, you need distribute in order to install pip, see:
Hi
As mentioned earlier, please note that this list is meant to have Django
related discussions. And Django != Python unlike Ruby(on Rails). You may
want to ask your question in a place like stackoverflow.com.
Cheers :)
On Tue, May 15, 2012 at 11:40 PM, Tanveer Ali Sha wrote:
> Actually i wanna d
For people used to using Vim in Unix, there is an Eclipse plug-in called
Vwrapper.
- knowledge_seeker
On Tuesday, May 15, 2012 3:16:00 AM UTC-7, Karl Sutt wrote:
>
> I use Vim, for everything involving writing -- coding, producing
> papers/articles/reports, editing existing code and documents.
I'm trying to deploy a django app with virtualenv but I'm not a linux
expert user.
It's on a shared host. If I type python I got the python 2.4 console. If a
type python2.7 I got the 2.7 console.
I want to use the 2.7.
1. I installed virtualenv with setuptools in my private .site-packages
Hello.
*How do I override get_object() from a subclass of CreateView? Is there
something I'm missing?*
I'm trying to override *get_object()* to provide a simple behavior.
However, my *get_object()* is never called. Instead, Django complains that
I didn't set self.model properly.
I opened the
You make a really good point about starting with Vim. I personally started
with Vim and used it exclusively for years and feel all developers need to
be at least proficient with it. But just as you should start with Vim you
probably also should move on once your intermediate to advanced in
developm
are you sure this is actually a good idea?
in almost all cases serving the image via the actual web server, whose job
it is to serve images, is the best idea.
either way, you wouldn't use an image field to store base64 data. that's
for references to actual files in a filesystem.
first you'd ne
To deploy with WSGI you probably want to use Apache with modwsgi.
There are other ways, but this is common.
modwsgi must be build against the python you want to use, and it
should have preferably been built after being configured with
--enable-shared. That is the only python that apache will use.
Hi,
I have found lots of posts on how organizing a kinda big project with
Django =<1.3 but I was wondering what could be the best option with Django
1.4 since the default layout has changed.
I have found just this post on the internet talking about structuring a
django 1.4 project:
http://www
H! i need a way to use a inlineformset in my app, anyone knows how to
use the inline tabular o stack formset of the admin site in an app??
--
You received this message because you are subscribed to the Google Groups
"Django users" group.
To post to this group, send email to django-users@googlegr
I have a form that is used to add an item where 2 dropdowns are populated
using different database than the database where the form will be
submitted. I would like to add AJAX to the drop downs where selecting one
item in the first drop down will auto populate data in the 2nd drop down
using AJAX.
Marcin
Some changes to increase coherence and a new Project Bootstrap page to
prompt incorporation of the project.
https://github.com/mdewhirst/sweat-equity/wiki/_pages
I will take it to my lawyer before starting and I'll post the changes then.
Thanks Marcin
Mike
On 15/05/2012 10:41pm, Mik
I'll try to help out a bit.
The first problem I see is in your Javascript. I believe your JQuery
selector is supposed to be the field's ID -- so, for example,
$("#csrfmiddlewaretoken").
Next, in your view -- I don't see where you're actually returning any data.
You should use Firebug or the Chrome
Hey,
I'm not really sure what you're trying to do here. You're using a
CreateView (which is built for creating new objects) and overriding the
get_object(self, queryset=None) method (found in SingleObjectMixin --
https://github.com/django/django/blob/master/django/views/generic/detail.py)
to, I'm
Hi Jani!
Now you can understand what i meant, but I'm not just try to mec things
complicated.
I'm not talking here about my technical implementation, but i'm describing
the needs/contraints, and my app architecture to you.
- The remote clients are at the heart of the software system, since data
Hi,
I attempted to download and use one of the sources for examples - the
"bashoneliners" project from: http://code.google.com/p/bashoneliners/
However, it complains that django_openid_aith is not found. I downloaded
the django_openid_auth module from the
location https://launchpad.net/django-
Hi,
I attempted to add 'media' directory to the root of my project and placed a
css file and some ajax javascript. The server runtime is unable to locate
it. Can someone help?
I have the following in settings.py
MEDIA_ROOT = os.path.join(ROOT_PATH, 'media')
MEDIA_URL = 'http://127.0.0.1:8000/m
Hi all!
I need a required true in Generic Relations.
Have this code:
# Models
class Client(Person):
addresses = GenericRelation(Address)
class Address(models.Model):
# others fields
content_type = models.ForeignKey(ContentType)
object_id = models.PositiveIntegerField()
content
Hi,
I just started to using django 1.4 with gunicorn 0.14.3
With ./manage.py runserver , i can start django properly and django can
find my files in static directory.
Then i use gunicorn and then gunicorn can't find my files in static
directory.
I have tried these combination
gunicorn myprojec
Solution:
http://pastebin.com/011WsfzD
Regards.
On 15 maio, 23:43, Guevara wrote:
> Hi all!
>
> I need a required true in Generic Relations.
> Have this code:
>
> # Models
> class Client(Person):
> addresses = GenericRelation(Address)
>
> class Address(models.Model):
> # others fields
>
Hi..
For the app, i like to use loose couple method from project dir so i can
reuse and plug my app in other project easily.
I learn it from a book call practical django apps.
And i want ask about settings.py, if we make the settings become a folder
and put dev.py, prod.py, any step to make ma
Hi;
I am trying to generate a printable report when saving objects for the
first time. This is easy enough except I can't easily access related
objects by overriding save() as they are not saved yet, nor are they
available within the save() method.
The new ModelAdmin.save_related() in Django 1.4
Hi again;
Looking at the source code I realised that form.save_m2m() must be
called.
def save_related(self, request, form, formsets, change):
form.save_m2m()
for formset in formsets:
self.save_formset(request, form, formset, change=change)
if not change:
For development, you could add this to main urls.py like this.
(r'^static/(?P.*)$', 'django.views.static.serve',
{'document_root': settings.STATIC_ROOT, 'show_indexes':True}),
But for production use your web server to serve static files.
At least this is how I solved it. I hope that helps.
O
55 matches
Mail list logo
